Counting matching models…
Another Baby-Groot this time with a Heavy-Meta Hand up in the Air. https://de.wikipedia.org/wiki/Mano\_cornuta#Metal In Germany we say Pommesgabel ;) Its my first ever Meshmixer edit. I hope i fixed all holes and errors with the Windows10…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
Layer 0.30 mm, filling 25%, brown PLA painted with acrylic markers, supports on the printing pad
Print approx. €12.19–€14.90 excl. taxPreliminary estimate for one variant
Remix of Val's Grogu from Mandolorian Original model https://www.thingiverse.com/thing:4038181
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
Print approx. €4.26–€5.21 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €13.07–€15.98 excl. taxPreliminary estimate for one variant
The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed
Print approx. €17.45–€21.33 excl. taxPreliminary estimate for one variant
A hydroponic growing lid designed for plant propagation, rooting cuttings, and simple water-based growing. The lid holds multiple small growing baskets above a glass, jar, or container, allowing plant stems and roots to stay supported…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop I used a random number generator to help pick the heights so I couldn't fall into any patterns. Sized to print on Mini+
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the printbed. Click here for a smaller version of this stand! If you like check out my other designs too!
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
I decided to try it without support and it worked. I chose the brim around the legs for a better feel. I haven't tried it without it. In order to print successfully, it is important to have a well-aligned bed, a lower hotend temperature…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
A little statue of baby Groot, can be used as a flower pot. Gcode-with support from the build plate Print instructions The program used for printing: PrusaControl - PLA
Print approx. €5.69–€6.95 excl. taxPreliminary estimate for one variant
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
Keychain baby Groot
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Do Avocado float your boat? This quick-to-print no support design can help you grow your Avocado seed without much intervention. Forgot to water the plants? No worries about this self-watering solution. All you gotta do is position the…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
This Mini Grocery Bag Holder is a compact and practical shopping gadget designed to make carrying bags easier and more comfortable . Simply slide the bag handle into the groove , and enjoy a pain-free grip while carrying heavy groceries.…
Baby Groot Head Pot Plant Nozzle: 0.4mm Layer: 0.2-0.28 (Recommended) No supports needed Scale it as you like :) Made the hole bigger so water can be drain better Model by Hanoch Hemmerich
Update 04.01.2022 This design was highly popular ever since I made it on a long winter night. Despite the fact that it required manual thread cutting to get it's M4 inner thread, users of the Prusa Mini liked it a lot. That was reason…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
🛒 IMPORTANT NOTE: Upon first use, the cart token slot may be slightly tight due to friction. To ensure smooth operation, insert and remove the token a few times, or use pliers to gently press it into place. After a few uses, it will fit…
Above Ground Pipeline! Everyone needs a pipeline, now and again. Be it your wargame, diorama, a scenic vista you are trying to create, or a hardcore game of 40K! Well, here's a cheap and dirty set of above-ground pipelines. Ready to pump…
Print approx. €14.77–€18.06 excl. taxPreliminary estimate for PETGSource material: PET
A play of light and shadow, kindling for whimsical fables. Open source version of https://cosmicjubilee.com/designs/twinkling-bloom/ - available to buy now! A tealight holder with delicate tendrils growing from its base, designed to cast…
***Updated 11-7-2022 | Now Compatible With 15mm & 22mm Tent Poles | *** Added 22mm ID versions of all clamps to add compatibility with grow tents that utilize 22mm OD support poles. If you need a version of these clamps with a different…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €24.55–€30.01 excl. taxPreliminary estimate for one variant
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
A minimalistic stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. The bottom is labeled, pay attention to this when inserting the hygrometer. A larger version of this stand:…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Thanks Extrutim for the original design! I searched a nice place for the original stand and saw my skadis board... So I added two hooks and ventilation holes. As simple as that.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
AEROPOD - Grow Pot Modeled for our AEROPOD System . This nursery pot provides the main feature of the system for you to try out for FREE! Healthy roots for happy plants. As experienced gardeners and plant enthusiast, we know that plants…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
Another Baby-Groot this time with a Live Long and Prosper Hand (aka Mr. Spock Hand) lctexas ( https://www.thingiverse.com/lctexas/ ) asked me via PM if i can do a version with this hand for his daughter. Of course I can do it :D…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
It's a thing you put in a 68mm diameter hole, so it looks nice if you stuff cables through it 🤷. It also adds a lid-thingy which prevents your cable(s) from falling back through the hole again. I made it for the Ikea PLATSA (HJÄLPA)…
Print approx. €4.75–€5.81 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PLA black to achieve a nice and strong print is printed facing down, textured and smooth beds are giving very differents finishes. Link to the thermohygrometer available on amazon:…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
BIG RED BUZZER / EMERGENCY BUTTON (Grobhandtaster / Not-Aus) I always wanted to have one of these "big red buttons". Print instructions Material: For the bottom half of the base, I used black PETG from "Das Filament", for the upper half I…
Modular desiccant/silica filament spool size container. Optional top to hold Hygrometer. I like to store one to five roles of filament in a ziplock vacuum seal bag. I wanted a desiccant holder that could grow or reduce depending on how…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
A simple print to allow you to insert a small round hygrometer into the lid of a Chef's Path brand cereal container for use as a filament drybox. The insert fits inside the top lid seal (since you won't be pouring anything out from this…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Baby Groot Standing
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl a simple and practical rope manager - hex holes inside can be used for my…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Wargame Building Terrain - Stand Alone Building - Group Three! Complex stand alone building with floor! Complex stand alone building with floor and slide in door! Complex stand alone building with No floor! The empires of the future won't…
Print approx. €4.06–€4.97 excl. taxPreliminary estimate for one variant
The Boeing EA-18G Growler is an American carrier-based electronic warfare aircraft, a specialized version of the two-seat F/A-18F Super Hornet. The EA-18G replaced the Northrop Grumman EA-6B Prowlers in service with the United States…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
This is a set of models to grow cat grass hydroponically in a standard or wide mouth canning jar. Want to keep your new cat grass upright, despite your cat's best efforts? Check out this companion print - Base for a Canning Jar…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
I bought a pack of 8 of these hygrometers for a filament dry-box storage project and had few left over. I wanted to have one of the leftovers out next to the dry-boxes to show the difference between inside them vs outside. So this is a…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
* Disclaimer : my full spectrum grow led strips is still in transit. I used a regular led strip for the demo, but it is not recommended * Details This microgreens farm is compatible with 5"x5" grow pads or Agar Agar gel. The seeds tray…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
A dummy bolt carrier group for Smith & Wesson M&P 15, could be used as a security device or to avoid upper deformation during smithing. Print instructions 0.3 mm 70% to 100% infill Better if you print it from PETG.
Print approx. €4.96–€6.07 excl. taxPreliminary estimate for PETGSource material: PET
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Orange Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 50 mm height 0 infill 1mm retraction 0.4 Z-hop 50 perimeters speed…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Simple desk grommet for a ø60 mm hole, covers ø75 mm in total ø64 mm hole, covers ø79 mm in total, table top thickness 37.5 mm ø73 mm hole, covers ø88 mm in total Lid snaps into insert so it doesn't come loose. If you need another…
Wargame Building Terrain - Stackable - Group One! Stackable building without floors - left and right modules. (using roof as floor in stack or hollow core). Stackable building with floors - left and right modules . Stackable building with…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
I had a handful of spare Weewooday brand hygrometers (bought on Amazon) that I decided to put to use to monitor conditions in my print room. They pop right into the bracket and are indexed by slots in the back to prevent them from…
Print approx. €24.77–€30.27 excl. taxPreliminary estimate for one variant
Saves time Unloading your groceries in just one trip with less strain on your arms, hands and fingers. Recommend a tough infill pattern like Gyroid or Cubic 0.4 nozzle, 0.2 layers 20% infill Dimensions: 220mm x 110mm (20mm thick) Handle:…
Yet another desiccant container that fits securely inside of a Prusament spool. It holds 2+ mm indicating silica gel and a generic round hygrometer to measure temperature and humidity.…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Zlin Agroturbo 1100 Version 1.0 (12.11.2023) Wingspan: ca. 1100 mm Body length: ca. 750 mm Take-off weight: ca. 550 - 650 g Motor: Brushless Motor 28mm Durchmesser (2200kV) ESC: 30A brushless-ESC Propeller: 7*5 ‘’ Battery: 3s Lipo 800 -…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Instead of paying $25 for “Pro” slotted cups from Click & Grow, designed my own replacement to use with ¼" wicking cord. The design has both a 1pc and 2pc design. I started with the 2pc design so it would be easier to feed the wicking…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET
Für den Xiaomi Mijia Bluetooth Thermomether/Hygrometer habe ich eine Wandhalterung konstruiert. Da dem Gerät nur ein doppelseitiges Klebepad beiliegt und keine weiteren Befestigungsmöglichkeiten vorgesehen sind, könnte es bei einem…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
I needed a cable grommet for my Ikea Platsa closet, where I have my printer, and all the other grommets I could find where either impossible to get to fit right or too large. So I made my own. It is made with a 30mm inside hole diameter,…
A simple free-standing case to hold a cheap rectangular combination hygrometer/thermometer module. Available in a 30° and a 45° front angle version. The rear wall is perforated to allow the ambient air to reach the sensors inside the…
I live in a very humid climate in Florida and need to make sure my expensive (but best quality) filament from Prusa is all dry and dehumidified. I have designed/remixed a solution to use rechargeable silica gel with a digital…
Print approx. €3.86–€4.71 excl. taxPreliminary estimate for PETGSource material: PET
Here it comes, a “Bobble Ball” Toy for your cats and other pets. (Funny side effect: It also do a great job of taking your little kids busy) Can be mounted on the floor and at the wall. I use for this knead or also double-sided adhesive…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
You are welcome to decide the name of this print, I frankly don't have a clue. I recommend printing slowly for the best quality. Also, add painted supports to cradle the bottom and the ceiling of the middle of the part to avoid a print…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. You'll need the free model for each featured building in this assembly, this entry is just the base platforms for each, they fit…
Hygrometer - https://amzn.eu/d/1nIj0yG Most of the Amazon ones are the same, as long as the dimensions are 48mm x 28.6mm Magnet - https://amzn.eu/d/4x4VSJl 3 x Magnet Size: Dia. 6mm x Height 3mm Hygrometer to be close to my plexiglass…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
I designed a funnel for my ECM Espresso machine, which fits into a default E61 brew group. The E61 brew group is the most common type found in almost every larger espresso machine. I created this design to work with the Eureka Mignon…
Part of the Grocery Store Gardener Collection These airtight containers are perfect for seeds from scrap foods. Simply air-dry the seeds for a few days, then store them safely for years. Shorter containers are perfect for small seeds like…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This is the safest way to hang a lamp, a carbon filter or whatever u want into…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
With this rotary stacking container you can store small things - bolts and nuts for example. If you do not need the boxes, you can store them space saving. On both narrow sides of the container you can attach a label. There are some…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
Created a stand for these commonly available round hygrometers. Found some models online which I liked, but had design flaws, sadly wasn't able to mod them due to bad modeling techniques in the base model - So I created my own. .f3d and…
výška - 10cm šířka - 6cm hloubka - 5,5cm
Attic White-Ground Lektyhos
Print approx. €11.57–€14.15 excl. taxPreliminary estimate for one variant
Holes drilled in plywood, MDF or chipboard can have unpleasant edges. This grommet is easy to apply and is the finishing touch to your work. The two parts are identical and fit into each other along a faint spiral. Once pressed together…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Even during intercene fighting, people still must get about the megalopolis hellscapes. Work accomplished helps the war effort. So travel in style on the Dual Multilevel Ground Transport. It will take you where you need to go. Whether you…
Print approx. €9.18–€11.22 excl. taxPreliminary estimate for one variant
Designed to lock and seal around a 12mm diameter by 8mm (max) deep hole while passing though a 4mm diameter (eg. USB) cable. I use this to power my dry box's wifi connected hygrometer.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Two stands for the Braun MKG5544 electrical razor/trimmer/groomer and its accessories. The accessory stand is for the different heads of the device. The stands might also work for similar models made by Braun. The accessory stand is…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Thermometer / Hygrometer Holder for ACE pro from Anycubic. It is for a circular thermometer / hygrometer with an inner diameter of 41.5mm. Of course, it can…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Project A comfortable compact grip for carrying reusable (or one-use) grocery bags. Grip easily fits in pockets or can reside on one handle while the other slips in and out of the grip when needed. Printing Prints vertical on either end…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
Big Antler Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the antlers fit well Select a version of the base and…
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for one variant
Introducing… The Folding Grow Pole and Trellis, designed by your's truly! One of the biggest drawbacks of using 3D printed parts is the fact that they are anisotropic; they are weaker when force is applied across the layer lines of a…
Print approx. €5.89–€7.20 excl. taxPreliminary estimate for PETGSource material: PET
I could not find a hygrometer/thermometer mount that didn't use the top support of the Prusa i3 MK3S, so I created one for use on the side supports. This may be needed for anyone who doesn't have enough clearance within their Lack…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
For the hole 22 mm and hose 1/2". Printing from ASA or PETG.
Print approx. €2.52–€3.09 excl. taxPreliminary estimate for one variant
This is Chunky the multifunctional tent peg Of course it is only a peg if you add the metal wire nail. It is designed to work with cheap but big nails with a diameter of 6-7.8mm. Bought pegs are weak, expensive or don't fit my needs.…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €22.06–€26.97 excl. taxPreliminary estimate for one variant
This is a minimalistic design for the well known thermometer/hygrometer. Can be used as a stand, but also wall or ceilling mount is possible. It is designed with a screw hole but the base surface is big enough to use a sticky tape also.…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
This bracket will keep the end of your rain gutter supported off the ground. It is sized for 2"x3" (nominal) downspout, a common residential size in North America. The actual inner width is 83mm. The bracket is designed to support the…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for PETGSource material: PET
Leave a make if u found it to be useful or write a comment for feedback, thank you! Did mine in PLA, 0.6 nozzle, 5% gyroid infill. Cut in half to fit on smaller bed sizes. Happy printing!
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant
Grogu Netsuke
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
This is a wrench to undo your Faema E61 group head mushroom and flow restrictor/ filter mesh cap. The size is 36 mm on one end and 22 mm on the other. I used it on my Rocket Appartamento (sizes should be the same for other brands but…
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
Das Set besteht aus Adapter für ein 120mm PC Lüfter Verbindungen: Innenmaß: 100mm, Außenmaß: 105mm, Länge: 70mm, 40mm, 20mm Zwischenstücke: Innenmaß: 96mm, Außenmaß: 100mm, Länge: 50mm, 30mm Aktivkohle Adapter Außenmaß: 100mm, Länge: 55mm…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for PETGSource material: PET
you can do the rigging with 1.75mm filament. check "extra perimeters on overhangs" if you want to print without supports. d&b is a german audio equipment manufacturer.
Print approx. €4.44–€5.42 excl. taxPreliminary estimate for one variant
This is a desk grommet that fits a 40mm hole and is 30mm deep I've made this so it has a wider brim/collar also a split 40mm grommet as the end of the cable wouldn't fit through the solid grommet the split takes 4minutes longer to print
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
This lid covers the ground coffee bypass for Philips Saeco 1200/2200/3200 series superautomatic espresso machines. Fits the same space as replacement part number 421944084601, but this has vents shaped like a dog and cat instead of…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Print instructions: Layer height: 0.2 (0.2 QUALITY Prusa Slicer Profile) Infill: 80% for better stability Perimeter: 4 Support with amplifier (included in 3mf)
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
I created this Swiveling Hygrometer Holder to provide an attractive and functional enclosure for the type of hygrometer that is included with the Original Prusa Enclosure (and also available from dozens of vendors on Amazon, AliExpress,…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Info This is a remix of @Petour's filament dryer: https://www.printables.com/de/model/7702-filament-dryer-extension-for-food-dehydrator I've added a socket for a thermometer/hygrometer, so you can see the real temperature and humidity…
Print approx. €7.48–€9.14 excl. taxPreliminary estimate for PETGSource material: PET
Use the same screw as before to attach this piece Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes, only on bed Resolution: 200 Infill: 20 Filament: Prusapolymers Petg Category: 3D Printer Accessories
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
I've made this small car stand for my 1/18th scale Arrma Mojave Gromblx, to keep the wheels off of the ground (to prevent flat spots while the vehicle is stored away and as a display and work stand. Other Arrma vehicles on the same…
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
No hardware besides the 608 bearings and PC4-10 fittings. No drilling required. This is the same as the original, except adding a stand for a hygrometer and a different design for the desiccant cover that prints much faster (7 min vs 18…
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
Part of the Grocery Store Gardener Collection While everyone is under quarantine, why not take up gardening? Start with apple seeds, pepper seeds, or anything you happen to have in your kitchen. Sized for window ledges, these tiny seed…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
I had problems with cardboard filament spools. They have too much friction. -> i designed a groove ball bearing adapter for easier rotation of the spool. (i like real groove ball bearings ;-) ) → testet it now with several prints, and it…
Print approx. €4.41–€5.39 excl. taxPreliminary estimate for PETGSource material: PET
Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal https://www.paypal.com/donate/?hosted_button_id=EA4R2NXW5LM7E Support with ETH 0x90016b1b920bde45ea77839f9c0a7b2db05edadbc907e990bbcdc23f2ce1dd2d Support…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Grow Tent Pole Fixture (Ø22mm) This fixture is designed to secure support poles to the sides of the indoor plant tent. Unlike the hooks supplied by the manufacturers of the tents, these fixtures clamp onto the tent's vertical poles as…
Print approx. €6.20–€7.58 excl. taxPreliminary estimate for PETGSource material: PET
Hook to hang groceries, gear, purses, etc. Single collar with tensioner screw ports in 3 axes to allow for installation on driver or passenger vertical headrest supports with no interference with vehicle operation. 3 components: a collar,…
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
