115 models
4 endcaps for Nema 17 sized stepper motors, allowing the use of GX12 (12mm diameter) locking circular multi pin connectors. More robust than the usual 6 pin JST connector or straight wires coming from the coils, both of which are prone to…
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
This is a 1:270 model of a GX1 Short Hauler. The wings on either side are print-in-place and can rotate up and down. The model is 138.1mm long, 66.4mm wide and 39.2mm tall. It has a hole compatible with a big pin and base from here .…
Print approx. €4.67–€5.70 excl. taxPreliminary estimate for one variant
About This is a dust cap to protect GX12 “aviation connectors” when not connected. This variant is designed for plugs and flange-mount plugs. There is a 13mm hex and a slot for removing the dust cap with appropriate tools. Additional…
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
Ein Gehäuse für die Steuerung einer CNC Maschine mit den Komponenten eines Arduino Uno R3, einem CNC Shield und GX12 Stecker. Ich nutze diese Steuerung in Verbindung mit Estlcam an meiner MPCNC. Zusätzlich werden 4 Schrauben 3*12 für den…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
About This is a clip mount for mouting cable connections with GX12 “Aviation Connectors”. Multiple clip mounts can be connected to each other to mount multiple cable connections. There is a mounting hole for an M3 or M4 mounting screw.…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of AZ-Touch replacement case with optional holes to mount up til 4 GX12 Aviation Connectors
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
Mainly used as a replacement for a missing cap on the GX16 connector on my electric scooter. You can trim the end if you want a shorter version, or swap filament before the end of the filet with TPU to make it more water-tight. Print…
''RGX11 melee Valorant'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot
Updated CAD below. A charge plug protector designed for the Funwheel Controller Box . Should fit a GX16 port with an m16x1 thread to secure it on the port. Tested on a Bambu Labs P1S at 0.08mm layer height for maximum qualityyyyyy. If you…
You can trim the end if you want a shorter version, or swap filament before the end of the filet with TPU to make it more water-tight.
This mod allows you to replace the original carbon filter, but let's you have up to 5 umbilical cables through the back of your printer. The design allows you to have a clean wiring inside the chamber and let's you manage all the CAN…
This is for people who want to modify a Time Crisis 1 clone arcade lightgun to use a GX16 connector and their own cable instead of the fixed shower hose that comes with the gun, without having to widen the original hole. Model should be…
Designed by Wga I print it with PLA, TPU maybe
Updated CAD below. A charge plug protector designed for the Funwheel Controller Box . Should fit a GX16 port with various sizes available if you're having tolerance issues. Tested on a Bambu Labs P1S at 0.08mm layer height for maximum…
The device is designed to make it easier to hold the radio during flights. This makes flying your drone much more comfortable and takes the pressure off your hands. It has a folding mechanism that takes up almost no additional space when…
I didn't like how others have the screw protruding on the end, so I designed this one to use some M3x15 socket-head cap screws that I had on hand. It fits the Longs 23HS9430 and probably a bunch of others. I printed mine in PETG at 0.15mm…
Print in TPU with: .2 height random seams (helps with watertightness) bridge counterbore holes as sacrificial layer (orcaslicer) 4 bottom shell layers (helps with watertightness) 10% gyroid infill
A parametric remix of the "Nvidia DGX Spark - 10in rack mount" by Dan Marchenkov, re-worked so a taller ASUS Ascent GX10 (GB10) fits — it does not fit the original tray. Both parts (the main tray and the backing plate/bracket) were…
Inspired by PunongBisyonaryo design. Thanks a lot. Use only flexible filament. Scale: GX12: 100% GX16: 125% GX20: 138% Print Settings Printer Brand: Creality Printer: CR-X Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Flex…
Update 6/23/22 Created a different lid (Lid v7.stl) and button (New_Button.stl) that is compatible the very nice TFT LCD display holder by design8studio here:…
Print in TPU vertically with supports and make sure the top layers are slow enough to properly cool. I'm including a .3mf file that I used with my ender 3 that has upgraded cooling. Should work with any GX16 plug but feel free to remix…
Works as a combo with the top mounted cooling duct
So this is a threaded gx16 charge port cover tailored for use in a vesc Onewheel. Inspired by this model intended for scooters that use gx16 charge ports: https://www.printables.com/model/71787-gx16-connector-screw-cap the model above is…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a cooling base for the ASUS Ascent GX10 , a GB10 based AI computer. The device typically runs very hot under load, and I would like to increase its life by helping it with cooling. In my tests using a constant…
The original mount was broken, and despite being extremely similar to the known D-Housing/D-Standard/D-Shape, it's not 31 but 32 mm long. So designed from scratch, the original doesn't even have the hole preventing the connector from…
Print Settings Printer Brand: Anycubic Printer: Kobra 2 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Flex TPU
A drop-in cooling stand for the ASUS Ascent GX10 (NVIDIA GB10 / DGX Spark family). The GX10 pulls intake air through its perforated bottom plate and exhausts out the rear. It can run into thermal limits, throttling & crash with sustained…
remixed design of the GX16-3 for GX16-4
This is made for the Original Floatwheel board. Specific cup for the 2-pole GX 16 which allows to isolate the connector from water and dust and prevent accidental short circuits 3D print it in TPU, no supports needed, standard profile…
Based on a remix box from @ BoostinIX https://www.printables.com/model/357932-8020-arduino-motor-shield-wind-sim-box added/removed/changed added 4 holes for GX16 connectors (16mm) added one USB cut out and removed the others added a remix…
Remixed of DoukDouk's model , specifically the folding arm, simplifying its design and changing it to a simple fixed length. Arm works with the base of the original model and its file is included. Will need 2x M3x10mm/12mm to mount the…
Designed with ABS in mind for the marine environment in lots of sunlight. Printed on Bambu P1P with standard 0.2mm layer height. This was modeled in the non-commercial version of fusion, this design is not a 100% copy of the original…
Nema 23 Motor Cover for GX20 Print Settings Printer Brand: Creality Printer: Prusa MK3 Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Engineering
Features Fits perfectly for anything with a GoPro mount Great overall stiffness to prevent shaky footage Fits nicely inside your carrying case for the radio Quick-release design - no need to unscrew all the way and have 2 loose screws!…
я печатал из TPU. но подойдёт любой пластик.
a controller box for five ledstrips, made for an AZdelivery ESP32. partslist: AZdelivery esp32 Terminal block I used this…
MagneTicFocuser [MTF] without electronics This is a second variant of the original [MTF]: https://www.printables.com/de/model/251874-magneticfocuser-mtf I designed them to run this system on an OnStep controller. OnStep offers the…
The bracket holds a GX16 plug (16 mm hole), which can be used to quickly disconnect and unmount the MMU2S from the printer. It attaches to the Prusa i3 MK3S frame directly. There should be 4 M3 tapped holes above the controller box, the 3…
A tool to help insert and remove a GX16-2 or 4 port. Choose the version you need from the files section or download all. Can be used by to hand to tighten/loosen on the knurled section or used with a wrench on the hexagonal section.…
A dust cap for the male end of GX12 connectors, originally intended to provide extra protection for the Lab599 Discovery TX-500 radio. Tested in both PLA and ABS, screws down nicely with proper 13mm threads. The pictured BNC cap is the…
A nice wall mount for your home ASUS Ascent GX10 LLM server. This mounting bracket can be mounted sideways and top down depending on your needs. There are little nodges for the feet so the GX10 will not slide out.
print 2 pcs mount , miror the other one for other side mounting using the m3 screw from the strap, the stand mount using m2x12mm and nuts
Radiomaster GX12 Folding Handle. This is a remix of a nice handle by Bevan. Unfortunately, when fitted, the radio will no longer fit in the rather nice case provided by Radiomaster. Wishing to use the original case, I set about desiging…
i printed in pla without supports with handle facing up and added an o-ring around the collar for good measure.
ENGLISH Each file contains a printing instruction in the form xx-xx. The first number is the precision, the second the filling. For example 02-30 means accuracy of 0.2 and filling at 30%. It is also useful to double the thickness of the…
A dust cap for the female end of GX12 connectors, originally intended to provide extra protection for the microphone of the Lab599 Discovery TX-500 radio. Tested in both PLA and ABS, the connector's ring screws down nicely. The difference…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a stand for two Asus GX10 power supplies, to help save room on your desk. It minimises contact with the power supply to prevent the plastic insulating it. These get hot. Do not print them in PLA or plastic with a low…
A charge plug protector designed for the Funwheel Controller Box . Should fit a GX16 port with an m16x1 thread to secure it on the port. If you want a normal plug version there try this one instead.
Hotshoe cover for a Panasonic camera with auxiliary port. Built it for my GX1, but should work on many others. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: .3 Infill: NA Filament: Generic PLA+…
get your vesc built up in a fungineers easy access printable box, i usually print these in asa.
I really liked the look of the Pheonix in Star Wars (Clone Wars series) so wanted to have a go at making one. I'm not quite sure this would print okay on my printer so I've not been brave enough to try it!
Model currently fits NEMA24 (59.5mm face). STEP file included for remixes. Features: Support-less printing Mulitple screw bores for fixing to different NEMA models Break-away cable slot for easy installation The break-away cable slot can…
Just a super simple press fit GX16-9 cover. Stl files are included as well as 123D design file. Inner diameter is 16.5mm and 18.5mm outer though there is also a 16mm and 16.3mm inner as well if it fits better for you. Make sure that when…
A charge plug protector designed for the Funwheel Controller Box . Should fit a GX16 port with various sizes available if you're having tolerance issues. 13.25mm fits most boxes so start there. Included is an f3d file if you need to…
Use: I used this Cover from @tijao at my MPCNC Nema17 Stepper Motors to replace the connected cables with GX16 connectors. Printing: I printed this Cover at my Prusa I3MK3S+ with RoyalBlue PLA from Prusa. I printed 2h16m. Build: to…
The Radiomaster GX12's screen can suffer in bright light. This shade slides onto the top of the screen to shade it somewhat and make it easier to read. The shade is small enough to be kept in the suppied transmitter case. Print with 100%…
For SFX-100 or DIY sim rig motion platform builders, this is designed to help mount a GX150 linear bearing rail to aluminum extrusion. Example GX150 rail here: https://www.aliexpress.us/item/2255800831885842.html *note: these can be…
Simple flush panel mount plate for aviation connector or electrical cable with countersunk holes for screws
Pair of brackets for the ASUS Ascend GX10 in vertical mode. The two parts attach to each end of the USB-C power supply and create a stable base that allows mounting the PC vertically. Ideal for a computer rack or saving desk space, while…
Add a label to your GX16 connector.
Snap on shroud for nema23 stepper motors that can hold a gx16 connector. Makes it easy to wire stepper motors, in my case for a cnc router by adapting the 4 wires from a nema23 stepper to a single cable. The 4 wires are cut to length…
I couldn’t find a tool to remove these nuts without scratching them, so I made this wrench. I printed it in TPU with 100% infill.
Print in TPU, plug shown in images is printed with a 0.4 nozzle. Modifications: Version 2 - mirrored keys allow for installing plug in two orientations Extended the finger grip to aid in pinching the handle for removal Added a bit of…
Case for an Arduino Due : https://lebois-racing.fr/arduino-due-amazon Originally designed for the SRT seat belt Tensioner : https://lebois-racing.fr/tensionneur-de-harnais-p1 You can fix it with two M5 or M6 DIN7991 bolts :…
This is a tool to tighten the nut on 16mm devices such as latching and momentary power buttons and gx16 charge ports. You can slide the tool over wires when your button or port is mounted in an enclosure or recessed and difficult to reach…
Add a label to your GX12 connector.
A simple dust cap for GX12 connections like those found on T12 soldering stations. M13x1 thread if you were wondering.
A simple stick protector to replace the paralon transportation stick protector. Protects equipment from scratches when folded. The tread size is increased for better protection with larger endsticks. For printing, it is recommended to use…
ASUS Ascent GX10 Modular Stackable Cooling Stand A modular stand for stacking ASUS Ascent GX10 units while leaving room for airflow underneath each machine. It can be used as a cooling base, as a spacer between units, or as part of a…
I have only seen this available one other place for sale… but now you can make your own for only a few cents! Recommend to print out of ASA for longevity but will work with of any filament at your own risk Use a .15 layer height to make…
This is a GX16 adapter for the chinese HOTD4 gun shell. I didn't buy it with an attached hose (and saved quite some money that way) so I made this. Threads are a bit hard to get right for every printer so please be aware that it might…
This is a new and improved version of my compact arca-type tripod plate designed to fit the Ricoh GX100 and GX200. Pictured here in Prusament translucent PETG with 100% perimeters for no reason, I just thought it looks cool with the…
Wanted a clean look to my ERCF install, so I modified a voron skirt panel to accept a GX16 aviation plug to pass my 24V/CAN cable to the BTT MMB. Connectors I used (Should work with any GX16 sized plug.) Can be printed in any material as…
I printed this in TPU but it may work with other materials as well.
The hole has a slight taper that allows you to lock the plug in any orientation. It is designed to be clamped in a bench vise for stability. Feel free to modify to suit. Print arrow side up. Align your seam in the small notch to prevent…
A push fit cover for GX16 connectors, common on soldering stations.
print in tpu with 0.2 height maybe 3 walls (solid, wont matter) random scarf seams on contour and hole 10mm max scarf length (maybe shorter)- scarves improve water resistance no support- designed for bridging finger grab side down tested…
Remixed endcap for Nema 17 sized stepper motors with a: 20x40x40mm fan GX12 (12mm diameter) locking circular multi pin connector The endcap supports a motor with coil pair wires and the GX12 connector is orientated to the side. It also…
Mounts to connect GX 16 connectors too to the Z axis stepper motor. I maintain my printer a lot removing the lead screws, and steppers to give them a good clean and regrease. Doing this i've broken the wires from the stock JST connectors…
This one requires GX12 4 pin connectors, and really cleans up the umbilical management! rest is self explanatory I hope, the required items are the same as listed in the original github.
This project is designed to make it easier to build small Asus Ascent GX10 clusters. All parts fit very tightly together, which prevents the structure from moving. No screws are required. All parts were designed for printing with a 0.4 mm…
What is this? A fully enclosed AS5600 magnetic encoder mount for NEMA 23 stepper motors with panel mount GX16 connector. Three printed parts do the work: the magnet riser carries the diametric magnet on the rear shaft, the sensor holder…
This is a remix of a remix. The original file uses GX16 connectors for general wiring, and XT60 for power. The remix uses a DB37 connector (?) for general wiring, and a Auto 6 Pin Power (??) connector for power. This backplate remix uses…
This Plug does plug. If you know, you know. If not, then better ask Tomy - he knows where this Plug goes!
A TPU dust cover for GX-16 and GX-20 series aviation connectors. I have added a design for the GX-20 and as well as a step file for both.
Extended GX16 2p power ports for ZWO AM5 / AM5N EQ mounts BOM ZWO AM5 or ZWO AM5N 2x GX16 2p 16mm aviation socket some wires NOTICE Any modifications to ZWO electronics are at your risk only, you must know what you are doing, I offer no…
Just a simple housing for adding GX16 Aviation style connectors to hard-wired 48mm NEMA 17 stepper motors. I didnt want to add height to my motors, and this style worked best for my CNC machine. Update - 02/12/25 : Added a version that…
Radiomaster GX12 SA/SD 2-Position Switch Mod (Reversible) This mod converts the SA and SD buttons on the Radiomaster GX12 into 2-position switches , making them much more convenient for functions such as arming, flight modes, beeper, or…
Doesn't block ports, vent or external module bay. Use screws from original cloth handle. Print with extra wall and any 3D infill. ASA or PETG as material suggested especially if cooling fan is in active use due to high power output or hot…
I had a bunch of 4-pin and 8-pin GX16 connectors left over from previous projects and figured they might come in handy for future toolhead upgrades or repairs. I designed two models: one with a cable escape, ideal if you're using a 4-pin…
потребуются резьбовые вставки М3х3х4.2 и винты М3х16
Now that I have a hotshoe cover design I like, I realized I never shared the design I made for the Ricoh GX200... So I updated it based on the new design, and here it is. It should print fine with the top side down, no supports at a 0.2mm…
Sleeve chaves pdt do Radiomaster Gx12
Build your own smart ESP32 thermometer for your homebrew setup — fully compatible with Connected Brewery and Has A Brewery . More information, assembly instructions and the open source project code can be found on GitHub For less than $5…
takes just a few mins to print and makes screwing in much easier.
Just a simple GX16 male housing with different cable sizes 8mm, 4mm, and 5.5mm. I created for a external PC power switch that I could connect at the back of the PC. Should work for other things
Wall mount for the gx1 streamer TV set-top box
Just use the M3, M4, and screws that come with the GX12.
![MagneTicFocuser [MTF] GX12](https://media.printables.com/media/prints/344483/images/2935363_da8b2c08-f1fe-4c78-aed0-c6490a1b7bd8/mtf_gx12_front.png)
![Ricoh GX100 & GX200 Arca Tripod Plate [UPDATED]](https://media.printables.com/media/prints/597137/images/4754777_14ec3d5c-362a-4350-a5f1-d2f152ac7dd7_3a52c1ff-c46b-4fc7-a515-12d5f8b6a7d3/dscf2515.jpg)
