Counting matching models…
This is a replacement "wishbone" to hold the speaker as the top part of mine broke, this model is a bit sloppy but works well. There is a steel C clip on the original part you will need it to hold this to the headband same as the…
Mittlerweile habe ich verstanden, wie zickig die Galaxy Watch im Gegensatz zur Apple Watch ist. Der Magnet im Ladepuck ist zu schwach, die Uhr richtig zu halten. Nach zig Jahren mit der AW eine Überraschung. Die Galaxy Watch 7 muss sehr…
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
This was a briliant model of the hinge for the Sony WH-CH720N, but it was only a model of the right hinge so I just mirrored the model to make a left one as well. Kudos to the maker of the original model please go like and download his…
The power supply mount is compatible with the 36V 2A PSU model SOY-3600200US-306 which comes with Govee RGBIC LED Permanent Outdoor Lights models H705A, H705B, and H705C. The controller mount is compatible with the aforementioned models.…
Simple case for Sony wireless headphones. Custom fit for Sony WH-CH720N but others will also work. For headphones where only the ear shells can rotate. Its a pressure fit for the lid, so tight tolernaces are needed.
There are two versions of this tool provided: v1 - The tool pictured in the cover photo - This is the tool my brother and I used. It has a label so years from now you or whoever finds it will know what the heck it is. v2 Slim Edition -…
Govee H706A Permanent Outdoor Lights Pro Mount Bracket I’ve designed two versions of this mount: A side-mount version A narrow-edge version requires just 1.5 inches of space. Both versions are designed with #8 self-tapping screws. I…
H7 Led adapter, based on osram 64210DA04 part. Print from hight temperatur and impact resistant material ( ABS-CF/GF ; ASA-CF/GF ; PA-CF/GF ) The original part made from PA-GF! 2 type, 1 with parts and assy optimalized for FDM prints, and…
A case for an H7 Car / Motorbike bulb. Only tested on the one spare bulb i had. Threads come from Dan Kirshner Can be a little hard to open when fully wound in, but pliers work. Print instructions Category: Automotive Summary A case for…
Description Description The Precise Support for Seiko NH3*, NH7* or 4R3* movements offers exceptional precision in dial placement whether the crown is at 3, 3.8 or 4.1 o'clock. Printing Instructions: Recommended Settings: Use a layer…
NZXT H7 COVER BOTTOM FRONT
This mount gives you a flat surface to mount a Govee light in the top center of a gable roof peak. I designed it to perfectly fit a roof with a pitch around 5.3/12 with the arctan(5.3/12) = 23.83 degrees. It should work fine for roofs…
FAQ I have built a X500 size quad-copter and I needed to reduce the vibrations to the MATEKSYS H743-SLIM Flight Controller as much as possible. This module will only fit the MATEKSYS H743-SLIM v2 and v3 flight controllers. To complete…
Print settings Nozzle 0.4 mm Layer height 0.1 mm Material PETG, ASA, ABS. I do not recommend PLA because of its low melting point Print with supports I recommend a infill between 30-100 Print from black or grey filament, as the colour…
Just a simple waste tray for 14SH754, might fit some of the clones i.e. Pfaff Hobbylock 2.0 looks very similar, but will have to check IRL. Works just awesome, catches not only cut fabric, but also portion of the dust! Print Settings…
An airduct/scoop to fill up the hole in the NZXT H7 Flow. The scoop directs the air from the front fans towards the GPU. This duct is specifically designed to work with 140mm fans. It bolts through the air duct into the 140mm fan as shown…
Mini shelf for USB Hub TP-LINK UH700 Print instructions Supports: No Resolution: 0.2 mm Infill: 40% Perimeters: 3
Replacement plastic housing for the H7 headlight plug in a Subaru Liberty/Legacy. May work with other cars.
Supporting the Gigabyte 4090 Gaming OC in the NZXT H7 Flow is tricky. The support that came with the GPU did not fit in this case because of the cable cover. I used the 2 threaded extrusions that hold a cable tray on the back of a case to…
This is a simple support I designed so I could attach the USB hub under my desk. It will also fit the UH720 model, but one of the side ports will be blocked. I suppose it shouldn't be too hard to update the model to avoid that problem. It…
I wanted a mount that could be painted to match the eaves, conceal the wiring in plastic wiremold/raceway. and protect the LED module. Other mounts I found were only designed to clamp the LED module by the wire. I printed these parts in…
needed to mount the usb hub to the profiles of my simulator it's a snug fit and doesn't jiggle around. uses M5 to secure
So, how is it better? Subjective: it's more appealing to me, more comfortable to hold Objective: it has a arrow-shaped hole for a heater LED, it has some room for a turbo button mod (basically shorting a potentiometer to it's max value by…
Adapter for Roborock H6 and H7 to 35mm suction attachments. Cut spring Ø12mm about 15mm long. Parts must be glued together. Adapter für Roborock H6 und H7 auf 35mm Saugaufsätze. Feder Ø12mm ungefähr 15mm lang zuschneiden. Teile müssen…
Simple case for Sony wireless headphones. Custom fit for Sony WH-CH710N but others will also work. For headphones where only the ear shells can rotate. Its a pressure fit, so tight tolernaces are needed.
Adapter for Volvo V70n reverse light to fit a h7 lightbulb. I used at Philips H7 - Led that could be rotated.
For this AMAZON Leds.
Watch the full video here : Check out PCBWay Here: https://pcbway.com/g/WQ1kw6 Waveshare microcontroller boards featured in this video can be found here: https://www.waveshare.com/esp32-s3-nano.htm?&aff_id=172582 My website with free…
A remix for pushing lubricant through mountingholes of linear rails or other use-cases.
Hello brothers and sisters, So my Ford Transit is disintegrating before my eyes… started to replace crucial parts. This socket is for double H4 headlights, but I think works with h7 also. I recommend using same type of metal connectors as…
It is a remix from this one: https://www.thingiverse.com/thing:7100587 This is an adapter for the Hyundai i30 (2013) to retrofit the Philips Ultinon Pro6000 Boost H7-LED. The ring form the LED needs to be detached, that fit this one over…
Reaching in and replacing the H7 Bulbs in the Scirocco headlight unit is a little painful and I personally don't have small enough hands to reach in and exert enough force in that weird angle to unlock the bulb holders. Many video guides…
Adapter for the H7 Socket on the GM/Chevrolet Astra year 2000 or plus. If the LED gets loose in the adapter, i recommend to drill a small hole and screw a set screw to lock the led. LED Diameter: 16mm Based on the led: Shocklight S17
Brackets for Govee H706C Permanent Outdoor Lights Pro Remix of https://www.printables.com/@Gelap https://www.printables.com/model/630613-govee-permanent-outdoor-lights-pro-mounting-bracke
Portenta H7 + LoRa camera shield. The LoRa antenna can fit in the tunnels above the case. The bump at the bottom can be threaded with a tripod 1/4-20 UNC tap. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes…
This custom 3D-printed adapter is designed specifically for installing H7 LED light bulbs onto a Kawasaki Z800 motorcycle. The adapter allows for a secure and straightforward installation process by accommodating the removable plastic…
Printed in PLA at 0.12 and worked well
A stand for charging Samsung Galaxy Watch7
Držák vysílačky použitelný na různé (i zaoblené) povrchy s možností zvolit si úhel sklonu. V2 - starý systém podložky a spojky V3 - nový systém s kloubem, na utahovací kroužek použij M3 šroubek a matku. Přichycení úchytu na palubku je…
I used to have the adapters magnetically mounted to the charging station, but they never quite stayed there. So i quickly designed this wall mount. It is meant to be screw into the wall, but you can use the step-file to adjust it to your…
Anti sag brace for the NZXT H700/H700i
Product Description This 3D model is an add-on waste box designed for the Singer 14SH754 overlock sewing machine. Since Singer does not offer an original waste box for this model, this printed accessory fills that gap and significantly…
Print on it's side, no support needed except for the opening in the side. Works for TP-Link UH720 and UH700 USB hub.
Description The Precise Support for Seiko NH3*, NH7* or 4R3* movements offers exceptional precision in dial placement whether the crown is at 3, 3.8 or 4.1 o'clock. Printing Instructions: Recommended Settings: Use a layer height of 0.20…
HID adapter for kia (ceed) dipped beam (h7 lamp) Made for generic HID/xenon bulbs from aliexpress. model includes bulb mount and prongs to plug adapter for sturdier connection. Plug adapter was remodeled since i took the firrst pictures,…
Držák na zeď pro vysavač Niceboy ion Hurricane H7 - tisk pet-g výplň 40%
Made a set of broken headphones whole again!
i loved what he designed and wanted to ad some new features, hot stand with 2 coins ( mine is 25 kr turkish lira but 10 cent euro will be the same size) , sponge or steel wool compartment, and also i had the 7 tip package so 1 was always…
This is a very simple model. It's just a tube with a bevel on the top that allows you to position it over the dome of your Govee Permanent Outdoor Lights so you can spray paint them to match the color of your house (or whatever reason…
Changed to fit tp-link UH720 with charging ports on the side
Text from Thingiverse: Summary A standard 1284x fleet key, like one you can buy on amazon, recreated to the best of my ability in CAD. I haven't been able to test it so I do not know if it works as intended so you may end up with the end…
This allows to install TP-LINK UH700 USB 3.0 7-PORT Ver.3.0 under a desk or at any Multiboard plate.
Inspired by this GPU support but the designs are so different I didn't end up calling this a remix. This is a GPU support bracket for an NZXT H700i or NZXT H700 case. It fits my GTX 1080ti Founders Edition, which means it should also fit…
To be installed on 58mm Adapter for DSC-H1, DSC-H2, DSC-H5 and other 2 aperture size available, 85mm and 90mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Generic…
Note that there are two versions of mounts provided - One accepts a removable cover and the other has no removable cover ability. The one that accepts a removable cover has an annular ring on the bottom designed to help prevent any light…
This is a remix of the bottom/back portion of the OpenMV H7 Camera case found here https://openmv.io/collections/cams/products/openmv-cam-h7-case and here: https://github.com/openmv/openmv-boards/tree/master/cad It allows three M4 nuts to…
I couldn't find any GoPro quick release mount for Camrock TH70 so I designed this using upper part from GoPro Tripod mount by tmorris9 ( https://www.thingiverse.com/thing:81333 ) The base at the bottom is 39.6 mm exactly. Tips: print with…
The Roborock H7 Pure stick vacuum did not come with a wall mount and a wall mount is not available for purchase. This wall mount can be wired to charge the vacuum when the vacuum is inserted or the wall mount can be used just as a hanger…
When assembling a dial and installing hands on a Seiko NH movement , minimizing movement handling can make the process easier and safer. This stand is designed to hold a hand setting tool for NH3x–NH7x movements while remaining compatible…
Náhrada originálního držáku + vyztužená verze. Replacement for original part + reinforced version.
SMA Jack Adapter for the Deenlai FSH710 junction box that re-uses one of the supplied rubber O-rings and PG9 nuts. Should work with other PG9 thread junction box holes and glands too. Print with supports for the recessed M6 nut hole…
A replacement for the crappy OEM rear cover that falls out.
Einbauhilfe H7 Led Lampen mit Metallspange Audi/VW
Its for Hyundai i40 2010- h7 bulb holder the original part was made out of ABS witch always melted. I suggest to use PVDF or PCCF filament, (PVDF is self extinguishing) V2 is for ceramic insert for the bulb (the ceramic connector can be…
I printed this on a Prusa MK3 with PLA, should work with other materials.
Updated to increase the length of Reamer 3 and for color printing.
Replacemet dowel , not quit as good as the original from blum but better than no dowel or the usuall “so i have to get a bigger screw”. Note: use Pin_V2 the V1 was not as strong as I thought. Ersatz Spreizdübel, nicht so gut wie das…
NZXT PCI Slot Cover should work with others models too.
I run a home server and it's a custom build, and my H730 controller was running at 53° C year round. Designed and printed this 40mm fan bracket and used a Noctua fan, and it now runs at 39-40° C year round. There were heat sink variations…
My computers live underneath the corner of an L-shaped desk, so I always like to replace their feet with casters to make it easier to access ports, etc. I printed these in nylon (Taulman3D Alloy 910, black) for strength/impact resistance,…
Haken um Kabel am Tower zu befestigen. Die Haken passen in das Lochgitter vom NZXT H710 Case.
This is a small case designed for the Arduino Portenta H7 with ethernet Vision Shield board. I used PLA material for the cases.
Same as original, made compatible with watch7 charging puck.
Needed a rack mount for my TP-LINK UH720 USB hub.
Replacement headband clip for the Sony WHCH710N headphones. Modeled in Solidworks based on the unbroken one I had.
Simple H1 and H7 socket covers, printed it to safely transport a pair of headlights. A set of blank and a set of rectangles to fit H1 (12x8mm) and H7 (17x10mm) sockets. (Make sure it fits yours) It's porbably easier to just use some burnt…
MOAR AIRFLOW FILTRATION If you Feel like you are choking your NZXT H7 Elite because you put a Toaster in your PC blowing with absolutely no Airflow, This Will Help you get Airflow and Keep Esthetics as well! This includes An Air Filter…
Simple USB hub mounting bracket. No support needed. I have used PLA filament with 15% infill.
You can customize the size of the ear pad adapter. You probably just want to change the diameter of the adapter. The actual pad itself either gets stretched over the adapter or stuck with glue, depending on what exactly what pad you have.…
Přídavná klipsa na tuto vysílačku se zajištěním. Do pantu použij kousek vázacího drátu.
Recomended printing at 100% infill in pla 870. It is an adapter for h7 bulbs to led bulb for motorcycle that does not bring it as standard. ----------------------------------------------- VERY IMPORTANT -…
Two files are included, one for a static mount, and one (Extended) for a sliding function. It's possible to slide the hub back underneath whatever you've mounted it under, to hide it.
Mine is a 2016 Fiesta mk6 "plus". Other adapters I found online were too small and none of them fit my headlights, so I've made this one. Use high temperature resistant material. Use at your own risk.
Krytka konektoru na zadní straně vysílačky TPH700
Pro spravnou manipulaci s žarovkou H7 For proper handling of the H7 bulb
Added a cap for the H7 bulb, to prevent it from damage! Added two versions with a slot for a voltmeter. Links below! I used this H7 car bulb for some months as LiPo Discharger or Killer. Since it works pretty well I decided to design a…
Use this spacer ring to put a 40mm led ring around your H7? halogen or led bulb. recommend nylon but if your bulb is of lower wattage pla might work. Print Settings Rafts: No Supports: No **Resolution:** 200 Infill: 20 **Filament:**…
Replacement gasket for Roborock H7 handheld vacuum dust bin. It replaces the round gasket at the centre of dust bin cover, which can easily fall out while throwing away the dirt. It should be also compatible with H6 model. On the photos…
jpgdesign3d.de 8,5Jx19 ET48 4F0 601 025 L 1H7 Einfacher 3D Scan einer BBS Speedline Felge. Nur die Vorderseite. Simple 3D Scan of BBS Speedline rim. Just the front of the rim.
IO shield for an Asus P8H77-I Mini ITX Motherboard. If you encounter any issues comment and ill try my best to fix it asap
As there is no chargin cradle available to charge the battery of an LEDLENSER H7R.2, iH7R or CRI battery, I built my own. This one can be handled with every li-ion chager. edit 04.05.2020: I added a "storage box" to prevent leakage…
This model is designed for further integration to projects. The SH7789 320x240 display can be securely mounted and screwed with M2 screws. The front panel is just 0.4 mm thick to make the display best visible for a watcher. I unscrewed…
Diese maßgeschneiderte Halterung für den TP-Link UH720 7-Port USB 3.0 Hub ist die ultimative Lösung für alle, die ein absolut cleanes und professionelles Setup an ihren 8040 Aluprofilen suchen. Egal ob für das Sim-Racing-Rig, den…
i printed in ABS, mm 0.25, velocity at 100, but you can do it in your way depending of the material choice. Good luck!
Frame for STMicroelectronics evauluation board STM32H7B3I-DK.
A simple stand for the D-Link USB Hub DUB-H7. The ports are easier to access it takes less space on a desk. Print Settings Printer: Cetus3D Rafts: No Supports: No Resolution: 0.2 mm Infill: 100 % Category: Computer
This is addon to my Xtouch stand model - allows to mount usb hub on a swivel (see photos in desc) I've included original stand model as well. Modelled for fit, you might adjust your printing settings and/or use tape to offset gripping…
Protect underneat your board while you work on it ;) See The OnshapeLink , Modify as needed.
![[OpenSCAD] Parametric Beoplay H7/H9/H9i/H9-3G ear pad adapter](https://media.printables.com/media/prints/349429/images/2970415_d5acfbae-890a-40a8-b2e7-9888a0ac0270/earpad.png)
