1,632 models
Fits any table top within 22mm or 42mm The prints on the pictures are made of: Prusament PLA Jet Black Headset Hanger 3.0 is available now: https://www.printables.com/model/633754-headset-hanger-30
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Fits any tabletop within 24mm ↑↑You find the recommended printing orientations in the pictures above↑↑
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
headset model: https://grabcad.com/library/adidas-gaming-headset-1
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
It fits 17mm, 18mm, 19mm and 20mm tabletops. Just choose the right file to download. I have a IKEA table top that are 17mm thick The print on the pictures are made of: Prusament PLA Jet Black And is the 17mm version
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
A simple headset stand.
Print approx. €7.90–€9.65 excl. taxPreliminary estimate for PETGSource material: PET
A very sturdy and clean design i made of a holder that clips on to my Xbox Series X to hold the Controller and Headset. The X infill is a seperate file and can (ofcause) be printed in various colors to match your style. You might have to…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Hi all I designed a Holder for my PlayStation 5 Headphones, the Holder fits mid-panel & will keep the Headset level, I also designed the distance to be just right so the headphones don’t permanently rest on the side panel. There are no…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Adjustable Holder for your gaming Headset. For 20 to 40mm thickness
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
< Beep bada beep AI is loading... > Is it a top secret stealth aircraft? Or is it a gate to another dimension? No! It's the next big thing since sliced bread! Inspired by hardcore gamers all around the world.... With edges so edgy it will…
Print approx. €5.28–€6.45 excl. taxPreliminary estimate for PETGSource material: PET
Attaches to the wall with a single screw, large enough to fit any size headband with room to spare. Prints with no supports with wall side facing print bed.
Print approx. €9.82–€12.01 excl. taxPreliminary estimate for one variant
The rods that connect the middle part to the top part may need to be sanded down a bit for a perfect fit. Hight : 23cm
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Stylish gaming headset stand inspired by the Corsair Gaming ST100 design stand dimensions 120x120x250 The premium headphone stand can be printed on the Prusa MK3/S/S+ printer as a single part. It can also be printed on a PRUSA MINI/MINI+…
Print approx. €7.96–€9.72 excl. taxPreliminary estimate for one variant
A charging stand for Jabra Evolve 75 wireless headsets. Print settings Material: PETG Layer height: 0.20 mm No supports needed. Materials Anker Powerline Micro USB cable - A8133011 (Other cables probably will not fit) Self-Stick Rubber…
Print approx. €5.73–€7.01 excl. taxPreliminary estimate for PETGSource material: PET
Even with 0.3mm pitch, embossing looks good. Three M4 standard screws are required for installation, i.e., screws with an outside diameter of 4 mm on the threaded part. Horizontal and vertical grooves are carved around the screw holes for…
Print approx. €13.63–€16.66 excl. taxPreliminary estimate for one variant
This is a simple headset holder for your desk. It fits up to 30 mm thick desks and holds headsets with a headband of approximately 43 mm wide. It was designed for the Steelseries Arctis 7 headset but will work with many more similar sized…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
Main Hanger part remixed from: Headphone Holder by Eric | Download free STL model | PrusaPrinters Controller arms remixed from: Oculus Quest hanger by Ishai | Download free STL model | PrusaPrinters I cut and combined these two models to…
Print approx. €5.68–€6.95 excl. taxPreliminary estimate for one variant
I have printed them with 100% infill. So far, they have proven to be surprisingly robust.
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Introducing my easy-to-use and fast-to-print headset holder for the PS5 ! Designed with gamers in mind, this simple yet effective holder clips easily onto the top of your PS5 console, providing a convenient and secure place to store your…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Wall mountable (3M Tape) XBOX controller and headphone holder,
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for PETGSource material: PET
edit: There is an improved version designed for PETG now. If you own the headset, you probably already know the original headband is very prone to cracking. There is already rudimentary replacement part out there but I wanted nice,…
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
Holder for PlayStation 5 Headphones
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
As the title says, these are cat ears for the Logitech G432 headset. I don't know if they will fit other Logitech or other brand headsets. I specify the the critical dimensions of the model below: The model has a 10 x 2 mm hole for it to…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
First, some explanation. It's been over a year since I released the original model and because it's been kinda popular and I improved the design, I'm uploading it too. This one is designed for PETG, the original is for PLA. I originally…
Print approx. €4.95–€6.05 excl. taxPreliminary estimate for PETGSource material: PET
Use 3.5mm Φ screws to attach it to the underside of a desk.
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
this is a headset holder for the most popular headsets. You can attach it to the wall
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
Made to be attached to a desk/table/shelf between 2.5 and 2 cm thick. I printed it in 0.20 but I guess it is possible to print it in 0.30 and still make the screw work.
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for one variant
My Jabra EVOLVE 40 headset breaks on the right "arm", so I created this reinforcement part. It can be used both to reinforce an intact headset or to repair (making it usable) a broken one. To have more stability between the printed part…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This will hold your David Clark controller box (either the DC One-X or DC Pro-X/X2) on the window headset clip. The controller box is designed to hold the box in only one direction, however the tolerances are loose enough that you can…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Fits any table top up to 42mm. No supports required.
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
There are 2 holes below, to screw it. I was inspired by this model : https://www.printables.com/model/211391-headphone-holder
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
Less than an hour to print and holds the headset securly using the existing strap.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
The model is print-in-place, no supports needed. Works best with headsets having a headband-depth of ~30-35mm. When the thumbscrew is in place, you can tighten the hook by turning it. Be careful not to screw it too tight. I used black PLA…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Printed in PLA 0.4mm Nozzle 0.2mm layer height
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for one variant
Kleiner Halter für Headsets oder andere Gegenstände.
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
[Update, 20230418]: New, wider version with “spring” is available. Printed in PLA. Will print in PETG later. Update 2023-06-27: Added .gcode file
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
I printed it with 30% infill but will probably work also with less, default settings in the rest, no supports needed. Do let me know if it turned out ok :D.
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
A model of a Capybara able to hold a controller and for use as a headset stand. I created it in Blender myself. The model fits a Pruse Core one with the dimensions being the following: X 223 Y 164 Z 270. The size has been modelled to fit…
Print approx. €30.53–€37.31 excl. taxPreliminary estimate for one variant
Sorry for bad cover pic I will try to change that in the future Print with any infill depending on what you like Supports yes any layer thickness
Print approx. €6.51–€7.96 excl. taxPreliminary estimate for one variant
This early version of 3D printed VR headset is realy simple, just print it and glue the two parts together. I was testing it on iPhone 11 with case, but I am going to upgrade it a lot.
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for one variant
A clamp attached headset hanger. TPU inserts for friction surface against the desk, shelf or tabletop you attach it to. Best printed on its side for strength. I print with 15% infill, gyroid, and it works fine.
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for one variant
I got tired of my headset hanging off the side of my computer monitor when I wasn't using it. It would also block a portion of the screen. There isn't another good place to hang the headset so I made this model as a way to hang the…
Print approx. €5.15–€6.29 excl. taxPreliminary estimate for one variant
19mm version is for Jabra Evolve 65 and 25mm is generic for other models. Use double-sided tape on non-screw version.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
See second picture for the height difference with the original. Don't mind the print quality, the layer height was set to .44 for quick printing.
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a new headset hanger and also a model to print my newly bought "Prusament PETG Orange" filament. So I overhauled the Prusament PETG Clamp, added several beams to facilitate the intended use. Soft- and Hardware: Programm used for…
Print approx. €7.45–€9.11 excl. taxPreliminary estimate for PETGSource material: PET
A modular take on Martin_au's Laptop Saver Drink Holder. When workspace is at a premium and you need coffee, tea & Mountain Dew all at the same time. I came up with this when a coworker had their drinks on their desk, blocking their…
Print approx. €22.91–€28.00 excl. taxPreliminary estimate for one variant
A simple headset holder for Ikea's IDÅSEN table. Thanks to the curved and smooth shape of the design, it is very strong while still being light and easy to print. It also looks better than most of the other designs ;p. Mounting It is very…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
Simple and fast printing headset holder to clip on top of IKEA EILIF desk wall.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Just a creepy storage solution for two wireless headset microphone packs. Option to also store batteries in the box.
Print approx. €3.89–€4.75 excl. taxPreliminary estimate for one variant
The 3D model represents an elegant headphone stand, specifically designed to be placed on the Arctic Z1 Basic monitor stand. The headphone stand features compact dimensions, making it ideal for use in limited workspace. Its unique design…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
remixed the great design by CrazyTim so that you can use a threaded insert and a screw for assembly
Print approx. €1.84–€2.24 excl. taxPreliminary estimate for PETGSource material: PET
Parts: 1x M12x330mm Gewindestange (Zweierpack für 2,99€) 2x M12 Muttern (Viererpack 1,49€) 2x Korrosseriescheibe 13x37mm (2 = 0,47€) 2x Karrosseriescheibe 17x50mm (2 = 1,49€) Gesamt: 6,76€ The diy-steuersatz-werkzeug (Headset Bearing Cup…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Printed with PETG. The part has +0.2mm tolerance on every fitting surface. With my Ender 5 i got a tight but makeable fit. Some fiddling is required to insert the screw of the original part into the print. It will cut its own threads into…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
This is a part which fits into the penholder inside a plane's cockpit which holds your headset. - V1 : Use only if you have a smaller headset top strap width and a vertical penholder. (otherwise the headset will fall off) - V2 : Use if…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Universal Headphone Holder for IKEA Kallax This universal headphone holder is designed for easy mounting on an IKEA Kallax shelf—no screws or tools required! All parts are 3D printed and can be assembled using just a 2 Euro coin. The…
Print approx. €3.75–€4.59 excl. taxPreliminary estimate for one variant
This is a simple headset holder.
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
A simple holder to attach your headset to the Haworth Toolbox.
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Ceiling or under-the-table mount for Valve Index headset and Varjo Aero. Designed to be easily 3D-printed based on the measurements from the headset. Recommended 3 perimeters with 2 mm brim to keep the corners from lifting up. 0.15 mm…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET
Replacement plastic part from Rog Strix Fusion 300 headset Print with supports, 100% infill, brim 6mm, 4 perimeters.
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for PETGSource material: PET
A storage box for stage headset microphones: it prevents the cable from tangling up. This model has 4 parts: a spooling bobbin for the cable, a shell and a two-part screw that holds those two together during transport. There are two…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
This is a replacement clip for the microphone cord on a Sigtronics aviation headset, it may fit other brands but I do not know for sure. I printed mine in PETG and it works perfectly, at 0.15mm layer height it is about an 8 minute print.…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This Headset Holder is design for a EYOCEAN LED Desk Lamp with a 20x16 mm frame. This model can be found easily, refer to the links below. Print in PETG or PLA. Two M3 threaded inserts and two M3x10mm socket head screws are required.…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
Gedruckt mit PLA. 0.4er Düse und 20% Infill 0.2mm Layerhöhe Glasscheibe sollte nicht dicker als 5mm sein.
Print approx. €2.85–€3.49 excl. taxPreliminary estimate for one variant
If you are a developer, and you don't want to hide the proximity sensor with your hand then this extension is for you! Here are the assembly instructions:
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Headset hanger with cable holder fixed with double-sided tape on my desk (tested for 2.5years now) i've splited in two the model and glued it together to have a better designed surface, printed in Mat black PLA 0.25 mm layer thickness 25%…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for PETGSource material: PET
My Exibel headset needed a new bracket. Works as expected even if the component is not identical.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
The Satyr3 is an open-back headphone, and as such leakes quite some noise into your surroundings. This remix converts it to a semi-closed headphone by replacing the fascia by a vented dome , so you feel comfortable wearing it in public.…
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for one variant
Simple but beautiful design headphone stand in two versions. (Long and shorter version) Print Settings: Layer Height - 0.2 Infill - 15% Walls - 2 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock…
Stylischer Kopfhörerständer, das perfekte Objekt für alle Gamer oder Musikliebhaber!
A 3D stand divided into two parts: the base and the tower. Specifically designed for controllers and headphones, the tower features arms with adjustable angles at 45, 66, and 90 degrees. This allows you to customize the stand for placing…
headphone & headset holder / stand The bottom is hollow, if you want to put something heavy in there like sand.
Screwable headset holder. Can be used on desk up to 35mm. Headset width must not exceed 38mm.
recomended equal or lower 0.20 mm layer height due to the need of printing a thread in laying down orientation
I designed this headset holder because I don't have space on my desk for my headset. That's why I came up with the idea of designing a holder that can be screwed to the table top. To avoid injuring yourself or gain space, you can simply…
Die Schraube geht am Anfang etwas schwergängig in das Gewinde.
Inspired by a number of holders found on the web. Nothing fancy, just a place to hang your headset and its associated cable(s).
Stand for two Dualsense 5 controllers and a headset. Features a passthorugh for a charging cable that will connect to either controller or the headset. Designed for Dualsense 5 and the Pulse 3D headset, but should work with most headsets.…
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
To properly secure the weak point, the model must be slightly below where the headband attaches to the frame. https://makerworld.com/en/models/2018195-playstation-pulse-elite-headset-fix#profileId-3040885 (for bambu users) Some people…
Designed to allow for the use of the Specialized SL7 spacers/stem on the 2022 Allez Sprint. It transitions from the round headset to the SL7 spacers with cutouts for internal cable routing. I printed in PETG at .2mm layer height, 100%…
Hi, here is my design of a playstation 5 headset hanger. I tried to make the hanger as best suited to the headset as possible and well presented, I moved it away enough so that the headphones did not lean against the console. It is best…
I printed it with a 0.4mm nozzle and a layer height of 0.2mm with PLA on My Ender 3 which worked well for me. Also, I wouldn't use supports as they may mess up the threads and the threads print well without them. I would recommend…
This headphone holder is very easy to print it dimension is 20x15x10cm and it is printed lying on its back. Make sure to adjust the position so it is lying down. You should use support for the headset hanger, everything else does not…
This works well for my PSVR2. There are a few choices for the base that add extra weight in the front to reduce tipping over backwards. See the STL files for the base choices. I printed the simple ‘front bar’ one at first and then the…
Wanted a sleek way to mount all Oculus/Meta headsets without getting near the lenses. This model uses the facial interface of the headsets to mount to get away from the lenses. Settings used: Layer Height = 0.20mm Walls = 4 Infill = 20%…
Another minimalist but ingeniously designed holder for headphones. An eye-catcher at your workplace, in the gaming corner or in the living room. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock…
Should be compatible with Logitech Headsets G230, G231, G332, G430, G432, G930 but only G332 was tested, and works perfectly. I used Prusa Mini+ with Prusament PLA and default “0.10mm DETAIL” settings in PrusaSlicer. Original author:…
Universal headset holder to mount to the corner of your monitor.\_(ツ)_/ Attatch it with double sided tape. I used 3M VHB. Mirror it in the slicer if you want it on the other side. I printed it in Prusament PLA with a 0.6mm nozzle and…
End Caps for Open V-Slot 2020 with Open Hardware logo. This is a remix from https://www.thingiverse.com/thing:398515 Zkrácená verze na 6cm pro sluchátka Print instructions Category: Audio Summary End Caps for Open V-Slot 2020 with Open…
The original model couldn't be used on my desk because it is much thicker then 35mm, so I remixed it. You'll need screw.stl, plate.stl and nut.stl files from the original model (…
A good friend of me needed a Controller and Headset holder for her new Xbox oneX. I searched but didnt find one that looks good for me. So i opend Fusion360 and did it myself. I used the Controller stand from agepbiz…
Headset Halter mit 2 praktischen Ablagefächern (oben und unten) für AirPods, Schlüssel oder andere Dinge.
I had my logiTech headset for a few years but the plastic caps broke and i wasnt able to find any replacements, since the last version that i uploaded i have added two small pins to the inside cap the pins hold the metal part that is in…
Stores your Steam Frame in a shaped tray, and both controllers drop into cradles in the middle, so the head strap wraps around them. The whole kit ends up in one compact bundle that takes about as much desk space as the headset alone.…
Headphone Stand V2 This is my split version. I tested the connections on Makerbot Version. If possible, publish your print on the Make tab. Tips: Paypal: https://www.paypal.com/donate/?hosted_button_id=XPLQK39DNVVSU BuyMeACoffee:…
Various on-board holders for Bose A20 Control Modules. The modules fit in perfectly and are aligned with the top layer of the holder for optimal accessibility of the keys and volume knobs. Also fits for the Bluetooth Version. Fix in a…
A remix of the simple IKEA Skadis headphone holder, which is made for wider headphones/headsets. The holder is available in 3cm, 4cm, 5cm, 6cm. I also added 2 holes to save filament. Supports where are necessary for printing. Update…
English: The Xbox Series X Controller and Headset Holder allows you to securely and conveniently store your Xbox Series X controller and headset near your console. This holder has been specifically designed for 3D printing and is easy to…
Description Headphone holder with screw clamp mechanism for mounting it to a desk. In this configuration, desks ranging up to 38mm can be accommodated. The screw features a hexagonal style head for a little different aesthetic than most…
A simple headset holder for the honeycomb storage wall. Added a lip at the edge to prevent wider headsets from falling off.
Fasya Daud's original design from https://www.myminifactory.com/object/3d-print-batman-heatset-stand-21232 Print Settings: 0.24 layer height %20 infill 3 walls 3 top/bottom No support/brim
