Counting matching models…
Try out this hummingbird generated using HueForge software! Play around with different colors and swap heights to customize the look. Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of…
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
HueForge Fire Dragon created for the Polymaker Fire Color Set . Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Fire Color Set: Panchroma Matte…
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant
This is my first project created with hueforge. Project files for BambuSlicer and PrusaSlicer are included. Use following colors and swap them in the order below: Black Red Yellow White Filament changes are layers based so you won't need…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Prusament Jet Black PLA Prusament Azure Blue PLA ESUN PLA LITE Gris PLA Esun Bone White PLA Control3d Blanco Swap Instructions: Start with…
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Overture Matte Light Gray PLA Control3d White Swap Instructions: Start with…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for one variant
Swap Instructions: LAYER #5 PLA+ SUNLU BLACK 0.48mm LAYER #8 PLA SILK OVERTURE RED CHRISTHMAS 0.72mm LAYER #13 PLA SILK AMAZON BASICS COPPER 1.12mm LAYER#16 PLA SILK OVERTURE NEON GREEN 1.36mm UNTIL THE END PLA+ SUNLU WHITE Printing…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Overture Chocolate PLA Prusament Lipstick Red PLA ESUN PLA+ Beige PLA Control3d White Swap Instructions: Start with…
Print approx. €5.65–€6.91 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #9 (0.8mm) swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White…
Print approx. €8.49–€10.37 excl. taxPreliminary estimate for PETGSource material: PET
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x187.5mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Basico Control3D Black PLA Sunlu Meta Grey PLA Basico Control3D Orange PLA+ Esun Bone White Swap Instructions: Start with Black At layer…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant
Picture: Generated with Stable Diffusion XL (metadata available in PNG file) Transparency via the extension: ‘stable-diffusion-webui-rembg’ Filaments: Prusament Galaxy Black base PolyTerra layers: Purple, Sakura Pink, Cotton White…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3D Black PLA+ Sunlu Grey PLA+ Overture Light Grey PLA Control3D White Swap Instructions: Start with Black At layer #9 (0.8mm) swap…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x193.79mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
A HueForge print of a JDM style concept car. The original is almost 8" x 8" - You can resize the X & Y dimensions if you want but do not change the Z or you will reduce the layers and the swaps below will not be accurate. I printed mine…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x154.79mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Gothic Raven - Hueforge Sized so you can print the frame on a standard sized printer. See frame recommendation below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size Filaments…
Print approx. €8.02–€9.80 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 162.28x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €4.69–€5.74 excl. taxPreliminary estimate for one variant
Hey, Je partage ma première création sur Hueforge ! Impression à 100% de remplissage avec une hauteur de couche de 0,16mm et une couche de base de 0,2mm . Le modèle a une taille de 200x112,5mm. Vous pouvez imprimer à des hauteurs de…
Print approx. €3.19–€3.89 excl. taxPreliminary estimate for one variant
For this project I use a defunct brand of filament, so make sure you use a comparable filament for color and transmission distance to replace 3D Solutech filaments, if you're going off of exactly what filaments I used. --- Print at 100%…
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €4.98–€6.09 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x187.31mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €4.35–€5.32 excl. taxPreliminary estimate for one variant
Imprimé avec les paramètres suivant : Hauteur de couche : 0.15 Première couleur : noir Deuxième couleur : gris, changement à la couche 8 Troisième couleur : blanc, changement à la couche 12 Fichier d'impression fourni pour le MMU, mais…
Print approx. €3.91–€4.77 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x187.5mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €4.24–€5.19 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x207.61mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x193.49mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €4.08–€4.98 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Green…
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.5mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for one variant
I created this nice puzzle, with the image of Walter White, I think he is a much loved character, for his fantastic TV series. I wanted to try the technique for creating nice puzzles, which I had read on the Prusa blog a long time ago. I…
Print approx. €12.01–€14.67 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x100mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Picture: Generated with Stable Diffusion XL (metadata available in PNG file) Transparency via the extension: ‘stable-diffusion-webui-rembg’ Filaments: Prusament Galaxy Purple, Azure Blue, Ms. Pink Blend, Vanilla White HueForge Project…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
My first HueForge project for the game Alien Isolation; I'm very happy with how it came out. This print uses 6 unique filaments. For this project I use a defunct brand of filament, so make sure you use a comparable filament for color and…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
Print Option: layer height: 0,10 Swap Instructions: Start with Black At layer #7 (0.80mm) swap to Dark Gray At layer #8 (0.90mm) swap to Dark Purple At layer #9 (1.00mm) swap to Dark Brown At layer #10 (1.10mm) swap to Dark Beige At layer…
Print approx. €3.82–€4.66 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 58.38x169mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.08mm and the Actual…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.38x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant
Print Option: layer height: 0,10 Swap Instructions: Start with Black At layer #7 (0.80mm) swap to Dark Blue At layer #8 (0.90mm) swap to Red or other color (background) At layer #9 (1.00mm) swap to Gray At layer #10 (1.10mm) swap to Light…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap Instructions: Start with Black At layer #8 (0.76mm) swap to Orange At layer #11 (1mm) swap to Beige At layer #18 (1.56mm) swap to White for the rest.
UPDATED 2023-07-25: Added a guide on how to use this test, plus other additional info. If you're interested just in using the test, don't read it whole; just read the “What is the Blending Distance (BD)?” section and do the steps of…
There are several ways to make Ornaments + Hueforges, the easiest way was to just add a hole in Bambu studio, so I decided to bring an ornament designed from Fusion 360, and combine both. This model was not generated using AI,the photos…
This is the official TD(Transmission Distance) step test developed by the creator of HueForge(listed here with his permission). This test can be used to test the TD of your filament TDs. This is the LEDs I used for the light box…
Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions : Start with Black At layer #8 (0.66mm) swap to Jade White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: PLA Smartfil Reciclado Negro Transmission Distance: 0.2 PLA 3DFils Galactic Red Transmission Distance: 5.8 PLA 3DFils Galactic Gray Transmission…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA JAYO Gray Transmission Distance: 2.5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA…
I created this minimalist floating Frame for my HueForge Filament Paintings. Included are the Fusion360 file and a .step file In Fusion 360 just change the user parameters “objectwidth” & “objectheight” to match your painting dimensions…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Pro Black PLA PolyLite Steel Grey PLA PolyLite…
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm. Also, use a brim to prevent lifting in corners. Filaments Used(Try to use similar colors to match my print): Black - Hatchbox PLA Dark silk blue - Generic PLA…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #6 at 0.56mm Red until layer #19 at 1.6mm Pure Yellow until layer #23 at 1.92mm White for the rest.
100% infill first layer height .16 layer height .08 colors and swaps black layers 1-4 red layers 5-7 grey/silver layer 8 white layers 9+ few other settings I like to use are inner/ outer wall 150mm/s infill overlap 25% hilbert curve top…
Hueforged T-rex 2 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade…
HueForge Butterfly I created for the Polymaker Blue Start Pack of Filaments. Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Blue Starter Pack :…
The size is 133x200. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #5 at 0.48mms Purple until layer #9 at 0.8mms Green until layer #15 at 1.28mms White until layer #26…
Owl generated on Midjourney and STL generated with HueForge. No MMU or AMS required. Small enough to print on the Prusa Mini, but I included the HueForge project if you'd like to mix things up a bit. Print at 100% infill with a layer…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ eSun Black PLA+ Sunlu Red PLA+ Sunlu Yellow PLA+ Sunlu White Swap Instructions: Start with Black At layer #8 (0.72mm) swap to red At layer…
I liked the model from Houston713Texan , but I found another image with the same characters placed in a different order and with more details. I’m really happy with the result. I used Hueforge to create this 240 x 167 piece. Print at 100%…
Original art created by us, then we used Hueforge to create this 200x200 piece Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab…
hueforge delorean blueprint
A baby elephant image generated by Midjourney - https://midjourney.com and painted with HueForge software. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sliceworx Onyx Black…
Darth Vader loves watching sunrises (and sunsets). Hates long walks on the beach, however. In the early morning hours, before the galaxy awoke, Vader would venture to a secluded spot on a remote planet, far from the prying eyes of the…
I hope you like it Please put a like it's always a pleasure and follow me Shelf Skadis Hueforge: https://makerworld.com/en/models/453432#profileId-360747 HUEFORGE Cats : . https://makerworld.com/en/models/446601#profileId-353110 .…
Hueforge Optical Illusions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab…
Dragon Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade…
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #13 (1.12mm) swap to…
Can it do the Kessel Run in 12 parsecs? Who knows?! This is a fairly simple print in place Hueforge Hybrid print-in-place piece that combines filament painting methods and traditional 3D printing methods in one singular print. It utilises…
IMPORTANT: This is the 3 slot version. The single slot version is available here . Update 23/02/2024 Added a new box of size W 160mm x H 240mm Update 11/01/2024 Added a new box of size W 200mm x H 200mm Update 22/11/23 Added 2 smaller…
I generated a 4 color STL of the Dragon decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made…
Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #8 (0.66mm) swap to White At layer #14 (1.14mm) swap to Black At layer #19 (1.54mm) swap to rojo At…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to rojo At layer #21…
By request added another STL. of a Charizard card without the Pikachu logo, it may be a bit darker than the original print (see photo of Hueforge model) For the 90's kid nostalgia, check out my profile for more Hueforge projects ✌ Print…
You need for display Your HueForge picture like this https://www.printables.com/cs/@DonMatis Verry fast and easy print I recommend using PETG, due to the flexibility of the joint
If you have no idea what Hueforge is look here You need something like black, then brown, then yellow, then white for this. I used a sort of dark red as the 2nd colour, worked ok. I used bambu studio and an X1C/AMS but you can use…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 100% infill Start with Black At layer #12 (1.04mm) swap to Blue At layer #16 (1.36mm) swap to Yellow At layer #24 (2.08mm) swap to Jade White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 156.8x235.2mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm…
Grogu, the adorable and enigmatic Force-sensitive creature, known to many as "The Child" or "Baby Yoda," had a curious habit that both amused and perplexed those around him. Whenever he had the chance, Grogu would eagerly engage in the…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3 PLA PolyTerra Lavender Purple…
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!*** Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: JAYO Black Transmission Distance:…
A seamless tile that can be used in multiple copies to create something in large scale. The dimensions are a bit odd [196x245], but was trying to create a cover for my laptop. Print at 100% infill with a layer height of 0.08mm with a base…
Hueforge Dreaming Cleopatra Illusion You have to options: With AMS or No AMS (pause at height). It doesnt require the following brands. You only need black, white, dark grey and light grey. The frame you can get here . Print at 100%…
To print this model you will either need a multi color printer, or to manually do some color swaps. There are some great tutorials on youtube for manually swapping colors. I printed this on an X1c BambuLabs printer with an AMS. If using…
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #10 (0.88mm) swap to…
A pre-made 3MF for Bambu Studio that has a swatch card and a modifier already set up.
Simple, print-in-place stand for Hueforge prints or other small 2d art.
This model has been carefully designed to look great with 4 colors. This is an easy to print 4 color Filament painting to add to your other Halloween decor. Only filament swaps! No AMS necessary. This does not need an AMS to print, but it…
Print the cartridges at whatever setting you like. The ones pictured were printed at .16mm layer height for improved curves. A Mouse-ear brim in the corners may be necessary to prevent the corners from warping. For the HueForge prints: I…
The source marked this model as adult content.
Darth Vader HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Protopasta Black Transmission Distance: 0.5 PLA Kexcelled Red Transmission Distance: 4.5 PLA Protopasta White…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission…
In Hueforge one important function is the Transmission Distance of your filament.THis test grid will help you determine the TD for each of your filaments. Be sure to use a layer height of 0.08mm and 100% infill. Start with white filament…
Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm This model was created with this Wolverine png. I used Elegoo Black PLA, Hatchbox Blue PLA, and…
I generated a 4 color STL of the snake decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made…
Put a beautifull racoon in your life ! (Because racoon is the best animal xD) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Model size is 220 x 220 (You can reduce or enlarge the size BUT ! Not change the…
Few Different Sizes to Pick From Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with Black At layer #6 (0.56mm) swap to Red At layer #16 (1.36mm) swap to White for the rest
_______________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models, future and past , become a member of my Patreon for a…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 186.67x250mm in size You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual…
Hello Printables makers, this is my first model . I am a new designer with an ever growing model base. I am now trying to gain a foothold in printables, I would like to offer my models here as well. I hope you like them ! Happy Printing !…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Please post you prints Filaments Used: PLA PolyTerra Charcoal Black PLA+ Esun…
4 color image Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Pitch Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Pure Yellow At layer #15 (1.28mm) swap…
Optical illusion processed in HueForge. My first HueForge attempt. 200 x 200 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA…
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm with a .2mm nozzle for best results. for .4mm nozzle try a layer height of 0.06mm with a base layer of 0.14mm. Filaments Used: PLA PolyTerra Charcoal Black…
Image of an orchid under the moon. Image was generated in Midjourney and painted in Hueforge The prompt used was: “orchid, high contrast colors, moonlight, cartoon, cel-shaded art style” I am still learning how to measure transmission…
![Technology Themed [seamless tile] - Hueforge](https://media.printables.com/media/prints/522390/images/4225725_854f5b47-2750-48fd-b1ad-49b37f32fcba/photo_2023-07-07_22-53-49.jpg)
