1,693 models
Mixup of the Voron Trident skirting and tops for the ender 3 v2. The logo's can be hard to press in a bit of heat goes a long way to helping. Make sure to print the 4 extension feet and use your stock rubbers. I just glued on the “dummy”…
Print approx. €6.93–€8.47 excl. taxPreliminary estimate for one variant
This is a trident for Dummy 13. It's about 150x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
It would be nice if you post your make. Thank you
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Quite fast to print, took me ~13 mins with the MK3S. Printed with PETG & PLA for comparison, works well in both variants.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
The ring was built open so that the material elasticity will keep it closed when snapped in position. It can be opened so that the animal feet is not harmed when installed. This is just for color coding of different groups of pigeon.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Scootaloo, just walking around. (My Little Pony fanart.) Based on the drawing by xbi: https://www.deviantart.com/xbi/art/Everfree-Forest-Cmc-Scootaloo-Sweetie-Belle-Apple-828884645 Print instructions The model comes in two variants: one…
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant
NW Präsident byl prvním továrně vyráběným sériovým automobilem na území Česka , resp. tehdejšího Rakouska-Uherska a jedním z prvních automobilů na světě vůbec. Automobil vyráběla továrna Nesselsdorfer Wagenbau-Fabriks-Gesselschaft A. G.…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
These holders hang from the XL's side extrusions to store your extra Nextruder nozzles. When the nozzle is in an extruder, the holder becomes a label that clips on to the extruder to remind you which nozzle is currently in use. The .3mf…
Print approx. €3.74–€4.58 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Today I have a Stand for 12 Resident Evil games for you. It is suitable for all types of Resident Evil game packaging. Playstation 1,2,3,4,5, Xbox one and Xbox 360. I haven't tried it on more games. The games fit perfectly and can…
Print approx. €11.76–€14.38 excl. taxPreliminary estimate for one variant
NW Präsident byl prvním továrně vyráběným sériovým automobilem na území Česka , resp. tehdejšího Rakouska-Uherska a jedním z prvních automobilů na světě vůbec. Automobil vyráběla továrna Nesselsdorfer Wagenbau-Fabriks-Gesselschaft A. G.…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Bronze Cast of President Lincoln's Right Hand The Library of Congress has a bronze cast of Abraham Lincoln's right hand, made by Leonard Wells Volk in 1860. The cast depicts Lincoln's hand holding the sawed-off handle of a broomstick,…
Print approx. €11.08–€13.54 excl. taxPreliminary estimate for one variant
Coin with the Ukrainian "tryzub" engraved in it. Uses art from PublicDomainVectors.org .
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Easy to print holder for towel. Use PETG so it is stronger, but PLA is also possible to use. Brim is not necessary but if its not holding on the plate then use brim. Use 0.20 layer hight with 25% infil and 2 perimeterrs. Here is video on…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
In love with the Capcom video game saga, I couldn't help but create the right cover for this new competition. I've included all the classic references from the Resident Evil 4 remake
Print approx. €3.88–€4.75 excl. taxPreliminary estimate for one variant
Printed with PLA 0.30mm. Size of one trident is 26.7 x 44.45 x 5.45. 3mf file have 6 pieces on the bed. Gcode for one piece is 6 min. printed. For 6 pieces is time print 51 min.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
These food identification sticks are designed to help guests with allergies or dietary restrictions easily identify dishes at gatherings. Simply insert the sticks into the plates to clearly label the food. This eliminates the need for…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
I use this to identify what filament I have in my printer when I finish a print I normally just cut the filament and bag it and store it away I place marker there to remind me the next time I go on what filament I have to eject from the…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Debido a su diseño puede ser utilizado con cables de diferentes anchos debido a que se coloca con amarres.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
I have multiple sets of keys that look the same, and sometimes I grab the wrong one. This design is intended for use in marking different sets of keys for easy identification. Print them in different colors to designate different sets of…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This is president snows rose from the hunger games movies, Its perfect for the premier of The Hunger games ballad of songbirds and snakes No suports requierd but maybe a skirt Printed on: Prusa i3 mk3 +
Print approx. €3.85–€4.71 excl. taxPreliminary estimate for one variant
The president of TECDIA, Mr. Koyama announced and called for the works for the 3rd TECDIA shacho challenge ( President award) . This model is the remix of Mr. Koyama's statue. I tried to design earing with these original models. The heart…
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for one variant
These educational plates are designed to help students easily distinguish between hard Y and soft I in spelling exercises. They serve as a simple yet effective learning tool for recognizing the correct usage of each letter, making them…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant
The clasp or latch on my offspring's lunch kit (a Presidents Choice Bento Box from Superstore) broke and I couldn't find a suitable replacement online. So I designed and printed this one. It works well. I printed it in PETG which…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
The Incident - 2010 But after a while, You realize time flies, And the best thing that you can do, Is take whatever comes to you, Cause time flies I love Steven Wilson and Porcupine Tree's music, so I created a set of 3D printable…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
The final word in squad organization and identification. Description Included: A 1-color variant dial cover A 2-color variant dial cover 2 target lock tokens (open) 2 target lock tokens (filled) 1 small base ship identification ring with…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…
To celebrate our new president's election, we created a bust of Petr Pavel. There are two versions available. A casual in a flannel shirt and a formal one in a suit.
Leon S.Kennedy orignal pistol from the video game Resident Evil 4. This pistol is based on a real one the HK USP. I have used the dimension of this real pistol to make the model. If you want to 3d print it, I advise you to choose the…
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
Find bolt thread pitches without threading them into internal thread checkers! Standard thread checkers where you thread the bolt into some internal threads can be problematic. When it's a close fit, it's hard to tell if a bolt is the…
I upgraded my Voron V2.4 with a CAN-toolboard. To fully replace the x and y drag chains, it is necessary to relocate the X and Y endstops. For X, there is a mount at the back of the toolhead carriage. For Y, it's common to move the…
This modified version uses M3x12 bolts instead of M5s, as M3s have by far enough strength to hold the weight of the printer. Also, I did not have M5 blots and nuts laying around. BOM (per handle): 2x M3x12 bolts of any type 2x 2020…
Canopy for the Voron 2.4. Will need to be printed with supports, corner for fan will need to be mirrored for one side. Will work with 250, 300, & 350. Will use the standard acrylic top panel. Spots for 60mm fans with spacing for charcoal…
The announcement of the Resident Evil 4 remake by Capcom made me want to model Krauser's famous knife. I was inspired by several illustrations and shots of the knife during the knife duel sequence between Krauser and Leon. The blade is…
Resident Evil Inspired Phone Holder. Print Settings: Infill: 10% Layer Height: 0.20 Supports: Yes Use supports for the back of the round part of the Stars logo and underneath the left and right overhangs of the top part of the Stars logo.…
Stronger Snap Latch with M3 Screw Because any voron builder has tons of spare M3 screws! This repo is based in the amazing works from: Original Snap Latch:…
THERE IS NO STEP FILE BECAUSE IT WAS MADE IN TINKERCAD. EDIT: Added more sizes for different thickness of acrylic and foam gaskets. I have not tested these other sizes. I wanted a full front door without the extra visual weight of a frame…
Detailed 3D model of the iconic hero from the latest Resident Evil installment. This figure features Leon in full tactical gear on a thematic base with a defeated mutant. If you enjoy my models, I would be very grateful for your support!…
Trident PTFE Guides Printing: Default voron settings, correct orientation, no supports needed! Bom: Only printed parts. Description: Made to guide the PTFE tube uniformly into the extruder, and avoid rubbing against the top panel. One 90°…
Simple replacement cable cover for the A drive of a Voron Trident to accept a PG7 cable gland for a CAN umbilical. Its a little wider and has screw-in threads for the common PG7 cable glands which are big enough to allow a genuine Molex…
This is still an untested WIP, but I am uploading in case people like the idea enough to modify to fit other printers. I intend for the handles to be useable. A ½" square profile steel pipe is to be tapped and inserted into the top…
UPDATE 05.05.2024: Die CAD Dateien wurden auf den aktuellen Stand gebracht. Die seitlichen Fan Cover, sowie der entsprechenden Fan Mount wurden minimal angepasst, da es hin und wieder Probleme mit den Lochabständen gab. Der Displaymount…
BE SURE TO SET CORRECT Z HEIGHT IF USING SEPERATE ENDSTOP. I RECOMMEND JUST USING THE TAP AS THE Z ENDSTOP TO PREVENT INCORRECT Z HEIGHT SETTINGS.…
It includes 2 versions; 25mm Base miniature, 100mm Base collectible
All Resident Evil 2 key locations: Where to find the Blue Spade Key, Red Diamond Key, and Green Club key. There are Resident Evil 2 keys to find throughout the game - the Blue Spade key, Red Diamond key or Green Club key are some of the…
A remix of a mounting arm I found in the Voron Discord. Unfortunately I don't know who created this. I made this one from scratch and also added the step. You need 2xM3x12, 2x extrusion nuts and 2 heat inserts. You can find some example…
King Tritons Trident I designed a replacement trident for my godchilds Disney King Triton (30,5cm) from Disneys Little Mermaid And by the way… look at this awesome guy printing my design for his halloween costume…
About This adds a 120mm auxiliary cooling fan to Voron Trident 3D printers. This is heavily inspired by the VzBots RSCS cooling fans. The cooling is mainly targeted at the center of the bed (around 150-200mm wide air stream). No…
This beauty is a 3d printable model of the Tron Ares Master Control Programm Identity Disc or M.C.P. Disc for short. Fully printable with FDM printers and only possible thanks to plentiful_props_3d To power this model you will need a…
…Please be sure to hit like & post a make, I'd love to see your prints! For use with model: https://www.printables.com/model/594894-voron-24-trident-canopy-top-hat-remix-split-model- These clips will keep your top panel sealed & secure in…
Voron 2.4 / trident 9mm belt gantry u'll need to think 8-10mm longer on every bolt. been using this on my 8 machines for a year now…time to share you need 12 695 bearings and if you dont use f695 as idlers in XY joints closest to print…
Not so much a remix as it was inspired by PushingPixels ' PG7 Cable Cover as the CAD is my own, but the credit definitely goes to PushingPixels for the concept. This is an adapter for a CAN umbilical to mount to the gantry using PG7cable…
Trident PTFE support Since it's little space above the gantry in a Trident the bowden tube gets tangled up at times (esp in a 350mm). This helps guide the tube out and around the chamber as the gantry moves around. Bom: 1x M3x8 Bolt and…
It requires 4, m2.5x10 button head or socket head cap screws. The screws pass through the Pi and Mount, and thread directly into the plastic of the DIN clips.
Uses a M3x25 instead of the default pin. You'll also need a M5x16 + nut and 2xM5x10 + 2x extrusion nuts Mounted in the rear right corner for the highest distance possible
The main goal for this mod is that I can clean the nozzle after I pause and resume the print, which is usually make small leakage of nozzle. You need 2 heat insert for the brush holder, to fixed the holder on the frame mount. Another 2…
Modified the original M9 models to resemble the Samurai Edge pistols from the Resident Evil games
Big thanks to FunFunBoy to his simple and easy Nozzle Scrubber Bucket . I want this bucket to fit my trident and i made this arm extension to mount it on the bed . Printed with ABS 0.2 /50% infil /4 walls / 5 Top -Bottom BOM 2 ( M3 heat…
A tamper evident, one-time use lock. Once locked, it has to be destroyed, which is evidently visible. I remixed this model so the overhangs print better and tweaked some tolerances.
I just modded the XY Joiner for the Gantry to fit MGN12H Rails instead of MGN9C. WHY? Cause i don't have 9C Linear Rails in stock :) Just the lower part has to be changed, upper joiners still stock. Print Settings Supports: No Resolution:…
For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG both work well; PLA is often easier for beginners.…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Standard Residential Propane Tanks Available Scales: N (1:160), HO (1:87) and O (1:48) Overview: Elevate the realism of your model layouts and dioramas with our Standard Residential Propane Tanks. These tanks come in 150-gallon,…
Previously to everything else, if you would need an adpated Version, like different Panel Size etc., just DM me and i might adapt and add it. (TBD) Modded back pieces for Umbilical Passthrough (06.09.2024) Screwable Retainer Lid for the…
Relive the atmosphere of the iconic Resident Evil movie with a detailed model of a vial containing the T-virus! Perfect for collectors, fans of the franchise and fans of sci-fi entourage. The model is intended exclusively for interior…
I printed it on the A1 mini using PLA+ with a 0.1 mm layer height . It is printed with AMS . It does not require support.
Mammoth-3D CPAP Muffler: Reducing Noise by 13 dB with 100% Airflow for 3D Printing Part Cooling The Mammoth-3D CPAP Muffler is specifically designed to reduce the noise generated by the cooling fan ( 24V Brushless Centrifugal Air Blower…
This is a project for a 124cm so almost life size Minecraft trident. There are holes where metal rods can be placed: three holes for 8cm long 5mm diameter rods in the head of the trident and a hole through the whole thing for a 1m long…
Jan. 23, 2023 Update: Added sheet holder for Voron 0. The slots are 1.5 mm wide and 128 mm in length Added the 350 mm size holder without logo as STP for customization.…
A simple trident model, 102mm long. As the model is chamfered on both sides, printing with a brim is recommended to prevent lifting or warping. (Just peel it off after =D ) Notes: Print with a Large Brim to prevent lifting. =D
The character of the Resident Evil game series is Ada Wong
Leon's Hatchet from Resident Evil 9 Requiem
Just remodeled the Voron Trident Z Carriages to fit MGN12H Rails, as i'm reusing some old parts for my build. Please NOTE THAT, Positions are all the same, nothing changes. As MGN12H Carriages are wider than your extrusion, you should use…
Prefab Voron Skirt's for custom made infill patern's on bootom layer as you can see in the preview. This is just .STEP files This work only for Prusa Slicer 2.5.0, in this version support a STEP files import Super Slicer don't support…
I broke my display that came with my LDO Voron Trident kit as a result of a series of bad decisions. Decided to run it headless for now and I didn't find a design I liked so I remixed the rear center skirt into something that would fit…
Description This is a complete skirt mod for Voron Trident. The stock skirts on Vorons feature very big hexagons which allow for fingers to pass through and are also aestehtically too “busy” for my taste. The aim here is on one side to…
A residential building remix for a generic Modern or SciFi settings, at 6mm scale. This is a substantial remix from the original. This set is intended to be compatible with the other 6mm SciFi terrain sets I have released. Search my other…
This model is an attempt to design an A-Drive mount for PUG (Parametric Umbilical Gland) See PUG https://www.printables.com/fr/model/378567-pug-parametric-umbilical-gland-for-cw2 For Voron 2.4 A drive mount see…
Tell them you love them with this simple keyring charm. Great way to consume last meters of filament. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my…
US President Donald J. Trump HQ 3D print model you can find here: https://www.cgtrader.com/3d-print-models/art/sculptures/president-donald-j-trump Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Category: Art
This is a modular kit of a scale model of a fictional multi unit house. It is a HO 1:87 scale model. This is my first kit in my new collection of miniature multi unit houses in HO scale. It requires assembly and glue. The walls and…
Para poder identificar los vasos y evitar tomar del vaso de otra persona
Background After switching my Trident over to using a CAN toolhead and removing the X/Y cable chains, the one thing that I wasn't satisfied with was umbilical wire management. Unlike on the Voron 2.4, piano wire isn't very practical since…
Color Ring to mark XLR cables, Neutrik xlr compatible. Print instructions Print 100%, snug fit.
Dimensions: 35x35x3 mm Print time is more or less around 24m at 0.16 layer heigh (0.4 mm nozzle). Print time is more or less around 32m at 0.12 layer heigh (0.4 mm nozzle). Print parameters: Layer height - 0.16 mm or 0.12 mm Perimeters -…
I originally made these doors for the Resident Evil 2 board game to integrate with the modular walls that I created, but then I got to thinking that someone might like to use the doors without the walls... so I made these! It's a real…
A neat trident for Dummy 13. He (or she) can spear their enemies at close range or 360 no-scope them from a distance.
This model is compatible with the lego system.
This bookmark commemorates the time Dorothy brought down the house. Printing Prints flat with no supports. Switch out filament to create striped socks and ruby slippers. Options Short - Faster print Long - Stronger hold Can I sell copies…
THERE IS A NEW VARIANT AVAILABLE https://www.printables.com/model/1028469-voron-trident-110mm-y-alignment-guide-jig-v2 A 110mm alignment guide for the VORON Trident. Print 2 pieces. Material doesnt mater as long as its not TPU Step File…
Second knife of the resident evil series i really wanted to make (i may just go ahead and make a bunch more) This time around i used some different tools from fusion 360 to make the bevels of the blade to keep the shape as authentic to…
modelo do game resident evil 4.
I designed this simple mod to hold and protect the umbilical cable I run to my Voron Trident toolhead. This guides the wires down through the slot in the A-Drive so that they can be safely routed to the electronic bay at the bottom. The…
(16.02.2024) Outsourcing the 66mm Version to it's Original repository (01.02.2024) Added CAD Files and made the 66mm Version to be screwed down (35mm TBD) → There were to much reports of the TopHat not sitting tight enough against the…
its a trident from undertale for dummy13. You have to turn the piece upside down. for make it easier to print.
This model snaps in to the color cap area on the bottom of a Shure BLX2 mic. Allows you to print your own color caps in whatever color you want to identify your mics easily. Under the battery cover at the bottom of the mic is a small…
An apartment building remix for a generic modern or SciFi settings, at 6mm scale. I've added extra detail and scaled this specifically for 6mm scale Mecha Fights. This set is intended to be compatible with the other 6mm SciFi terrain sets…
This PLA filament tag is a small, practical accessory designed to help you easily identify and organize your filament samples. The tag features a rounded square shape with a hole for attaching it to keychains, hooks, or sample prints. It…
