P
Printablesdummy 13 guy
wilcox mount for nvg
this can help a litle (i added wilcox mount holder because the one what is in first file is bad so it cannot be moved up and down but can
- Downloads
- 681
- Likes
- 48
- Rating
- 0
Search results: ilco
Counting matching models…
P
PrintablesCapt_Napalm
MLOK Railcover - 2Slot w/ Diamond Grip Texture
Slim fitting 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
- Downloads
- 409
- Likes
- 51
- Rating
- 5
P
PrintablesCapt_Napalm
MLOK Railcover - 2Slot w/ Hex Grip Texture
Slim fitting 2-slot wide MLOK rail cover with a hexagonal textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
- Downloads
- 303
- Likes
- 34
- Rating
- 0
P
PrintablesItsOwl
Dovetail to Wilcox Night Vision Adapter
You need an m5 bolt and nut
- Downloads
- 208
- Likes
- 22
- Rating
- 5
P
Printablesveng1
RailCore Bed and Texture(Overlay) for PrusaSlicer
The stl is used for the bed model in PrusaSlicer.and is installed int the Printer Settings tab, Bed Shape Model dialog. Load the stl .file Normally the stls are in the PrusaSlicer\resources\models. The Overlay or what Prusa calls Texture…
- Downloads
- 167
- Likes
- 4
- Rating
- 0
P
PrintablesAuamarto
Spuhr compatible Wilcox Raptar adapter
Model require two screws M4x16 or M4tx16 to mount to Spuhr optics mount. supports required
- Downloads
- 135
- Likes
- 2
- Rating
- 5
P
PrintablesCapt_Napalm
Wider MLOK Railcover - 2 Slot w/ Diamond Grip Texture
Contoured 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
- Downloads
- 133
- Likes
- 22
- Rating
- 5
P
PrintablesECF
Core XY 3D Printer (Railcore II derived) - Fusion 360
This Core XY design is based on the Open Source RailCore II project ( https://RailCore.org ) with a number of modifications, including: 2020 Extrusions (1515 is standard) Aluminum Bottom Plate Billet corner bracing Billet X Carriages…
- Downloads
- 118
- Likes
- 14
- Rating
- 0
P
Printables4sStylZ
Husqvarna 701 key cover for ILCO TMC1 blank key
Don't want to pay for a 70$ HVA key ? Print the cover and use it on a blank key. — I retro-enginered the 701 key from Husqvarna because I destroy a key into my motorcycle. This model isn't 100% close to the original key because some curve…
- Downloads
- 112
- Likes
- 3
- Rating
- 0
P
PrintablesTycho Ordo
Pimax Wilcox NVG Mount
Had the Idea to mount a VR headset using an NVG mount for years and finally got around to implementing it. While the end result is functional, the massively increased weight makes it rather impractical as it is quite front heavy, even…
- Downloads
- 106
- Likes
- 15
- Rating
- 0
P
Printableskotana
VORON trident nozzel brush (bambu a1 silcon brush)
My printer is small and needs to be attached on the left side, so I reduced the spacing and adjusted the size.
- Downloads
- 105
- Likes
- 8
- Rating
- 5
P
PrintablesJura Švébiš
Silco - League of Legends Wall Decor
Silco - League of Legends Wall Decor
- Downloads
- 103
- Likes
- 17
- Rating
- 0
P
Printablesjpfranca
Philco Gourmet Black Air Fryer - Handle and Knob
Replacement handle and knob for Philco Black Gourmet Air Fryer - Model PFR15 . This is my first model, not perfect but fit por purpose. Feel free to modify and improve it as you please.
- Downloads
- 94
- Likes
- 7
- Rating
- 0
P
PrintablesPedro Gibran Fonseca
Ceiling fan (Philco / Britania) remote control support
Support for the remote control from the Britania / Philco ceiling fan.
- Downloads
- 87
- Likes
- 6
- Rating
- 0
P
PrintablesThehead
Railcore LGX Mount using mosquito
Update 21Sep2023: I've updated the model with V3, after about a year or so I had a failure. V3 is vastly strengthened and should work for much longer. This is a mount for the Bondtech LGX with a mosquito attached for the Railcore. It is…
- Downloads
- 84
- Likes
- 10
- Rating
- 0
P
PrintablesMechatronist
Eureka Spaceship Roger Wilco’s Ship From Space Quest 5
A model of the Eureka from Space Quest 5. The Eureka was a Hoover Class Garbage Scow captained by the player character Roger Wilco. Follow me if you would like to stay notified about all my future designs. Find more of my designs at Cults…
- Downloads
- 84
- Likes
- 8
- Rating
- 0
P
Printablesdereksrose
The EvilCorp Coaster Collection
I made a collection of coasters of malevolent corporation logos from my favorite shows and movies. Or at least the ones I that would work in 2 colors on a round disc. Each coaster is 100mm in diameter. Color change is via filament swap.…
- Downloads
- 83
- Likes
- 18
- Rating
- 0
P
PrintablesFractalengineer
Railcore II ZL X LDO Smart Orbiter V3 X Euclid probe mount
I've included a STEP file of the whole assembly for your reference For more info go to Smart Orbiter V3 Extruder: https://www.orbiterprojects.com/so3/ Euclid Probe: https://euclidprobe.github.io/ Cheers and happy printing! __Yves
- Downloads
- 81
- Likes
- 12
- Rating
- 0
P
PrintablesCatMan167
Wilcox G24 Mount for PNV-57 (NVG)
Adapter for mounting the PNV-57 NVGs to the Wilcox G24 helmet mount. It was designed in Inventor and should be easily modifiable. Made to be used for playing airsoft. Uploaded simplified version if you have printing problems or want the…
- Downloads
- 74
- Likes
- 8
- Rating
- 0
P
PrintablesRT3D
Railcore II Squash Ball Foot
I designed a squash ball foot mod for the RailCore II 300ZL based on the original files. Note: Squash ball will feel a little tight when putting them into the feet, just squeeze and rotate. Amazon: 4 x Squash Balls used -…
- Downloads
- 73
- Likes
- 5
- Rating
- 5
P
PrintablesWummeke
T4 California Railcover "The toe-saver"
I sold my 2003 VW T4 California Freestyle and I am cleaning up the designs I made over the years. This cover fits in the rails of the living area, to prevent hurting your toes when there is no carpet there. Unfortunately I don't have any…
- Downloads
- 67
- Likes
- 5
- Rating
- 5
P
PrintablesKoueKoffie
Smart car phone Holder for HUAWEI mate 20 pro with Silcon case (Single and Multicolor))
A phone holder for the Smart car specifically for the Huawei Mate 20 fitted with the official Silicone cover Print instructions Category: Automotive
- Downloads
- 60
- Likes
- 3
- Rating
- 0
P
Printablesjslaker
Railcore II Locking Door Hinge
This is a door hinge for Railcore printers meant to prevent the door from swinging open or shut on its own. It uses a simple pin in track mechanism to lock the door open at 0, 90, and 180 degrees. To move the door between positions,…
- Downloads
- 58
- Likes
- 12
- Rating
- 5
P
PrintablesHanno
Mobilcool FR40 MCF40 Luftkanal
Luftkanal zur Geräuschdämmung und Ansaugung in Bodennähe. Wird einfach in die Löcher gesteckt. Ggf. Pattafix zur fixierung nutzen. Ggf. Filz oder Schaumstoff einkleben. Gedruckt aus ABS, kopfüber, mit Support
- Downloads
- 58
- Likes
- 5
- Rating
- 0
P
PrintablesSrThink
Suporte de controle ar condicionado Philco
SUPORDE DE PAREDE E DE MESA PARA CONTROLE DO AR CONDICIONADO PHILCO
- Downloads
- 54
- Likes
- 1
- Rating
- 0
P
PrintablesRailCoreLabs
RailCore® II 300 ZL/ZLT
RailCore® II 300 ZL/ZLT Railcore is a family of Core-XY based Reprap 3D printers designed by J. Steve White, Tony Akens, and Ben Withem. Build of Materials A BOM is provided with links to where you can source the parts and available…
- Downloads
- 54
- Likes
- 19
- Rating
- 0
P
PrintablesJon Ares
Philco Model 511 Speaker Vintage Radio
My own version of the Philco model 511 vintage radio speaker. These were wired to the main radio, and are very hard to find. I needed one for a show, so I built a wooden version of the main radio (the originals are metal, painted to look…
- Downloads
- 54
- Likes
- 14
- Rating
- 0
P
PrintablesTimmy Turner
Full Size Filco Majestouch 2 Keyboard Case
This is a model of the top portion of the full sized Filco Majestouch 2 case. I was inspired to make this case, as I often see custom TKL cases for sale, but almost never any full sized. Due to the size of the case I needed to split it…
- Downloads
- 53
- Likes
- 6
- Rating
- 0
P
PrintablesGouldshaw
Wilcox L3 G10 NVG GoPro Adapter
Adapter to mount a Gopro or similar device to a Wilcox L3 G10 NVG shroud. Will require a separate backplate that can be found from airsoft shops for around $7.00 USD. Search for “Warrior Wilcox Adapter for L3 Series Mount Plate (Black)”…
- Downloads
- 51
- Likes
- 2
- Rating
- 0
P
PrintablesCaitlin
PanelDue 7i Case for the Railcore II
This is my simple PanelDue 7i case for the Railcore II. The screen will be 0.5 mm recessed from the front but other then that everything should be flush with everything. The used M3x18 screws but any 3mmx18mm screws and hex bolts should…
- Downloads
- 49
- Likes
- 1
- Rating
- 0
P
PrintablesMikeF
Philco Pushbutton knob for vintage radios
The is for the Philco radios Circa 1940's that use the short push button. The knob measures 0.485x0.477x0.65 I designed the slot slightly larger than the shaft and added a ridge inside the slot to hold it firmly on the shaft. This works…
- Downloads
- 44
- Likes
- 2
- Rating
- 0
P
Printablesjslaker
Railcore 1515 Segmented LED Light Strip Diffuser
LED diffuser assembly designed to attach to the 1515 extrusion of the Railcore II. The assembly is designed for 10mm wide LED light strips that can be cut in 100mm segments. Each assembly dovetails into another so that the diffuser…
- Downloads
- 43
- Likes
- 7
- Rating
- 0
P
Printablesmachinekoder
Silcone (Mini) Kitchen Spatula Mold
Since most filaments aren't really food safe, I remixed the original to create a mold for (hopefully food-safe) pouring silicone. I printed everything in PETG, 0.15mm layer height. Increase infill to make the handle stiffer.
- Downloads
- 43
- Likes
- 8
- Rating
- 0
P
Printablesjpilar
Philco Ciclone Force - Front and rear wheels
Rodinhas para aspirador de pó Philco Ciclone Force. As rodas traseiras e dianteiras possuem tamanhos diferentes, bem como seus bastonetes. Temperaturas: 238ºC - 100ºC (ABS)
- Downloads
- 41
- Likes
- 1
- Rating
- 0
P
PrintablesRoni Gomes
Trava para Aspirador Philco PH1100
Trava do compartimento de resíduos para Aspirador Philco PH1100
- Downloads
- 40
- Likes
- 0
- Rating
- 0
P
PrintablesEvan
Angled Y Rail Backer & X Carriages for Railcore
This is my current take on supporting the Railcore Y rail with a backer to reinforce the axis and reduce ghosting. Holes can and should be tapped for M3 hardware, simplifying installation and (theoretically) improving performance (a bit).…
- Downloads
- 38
- Likes
- 5
- Rating
- 0
P
PrintablesFanatical Detail Maniac
generative z slider for railcore mini with lm10uu (2 versions)
There are two versions available a 19.00 mm and a 19.05mm bore. Try the 19.00mm bore first and if you're able to press the bearings in (they will be tight as this is likely an interference with how printers work) go with that if it is…
- Downloads
- 38
- Likes
- 7
- Rating
- 0
P
PrintablesDORLOCK
Spojka struhadla / Grater coupling Philco PHSM 9000 11,5 mm
Coupler for the Philco PHSM 9000 grater shaft. 11.5 mm is the inner diameter of the star-shaped hole where this coupler is inserted. There is some clearance for inserting the shaft, but please adjust it according to how accurately your 3D…
- Downloads
- 34
- Likes
- 1
- Rating
- 5
P
PrintablesGaloreous
Silcone sock mold for V6/dragon meltzone extender
This is a mold for a sock if you are using a meltzone extender. It fits V6 blocks and similar ones like the dragon. I use the female portion of the mold as my mix pot. I load in 7 grams of part A and then mix in the appropriate amount of…
- Downloads
- 33
- Likes
- 16
- Rating
- 0
P
PrintablesJohnOCFII
Railcore Narrow BLTouch Mount
This remix of the RailCore BLTouch mount allows the BLTouch Y offset to be 36mm instead of 42mm from the nozzle of an E3D-v6. This will allow for a larger print volume in the Y direction. Print Settings Printer: Railcore 300ZL Rafts: No…
- Downloads
- 33
- Likes
- 4
- Rating
- 5
P
Printablesrevere521
TheDroppelganger - A Filco Compatible 87 Key Mechanical Keyboard
I love my Drop CTRL - and if i was a very rich man, i would own all the variants...but i'm not...so I did the next best thing and designed a Filco - compatible keyboard case that emulates the shape of the Drop CTRL high profile. My…
- Downloads
- 31
- Likes
- 11
- Rating
- 0
P
Printablesalvarorg
Stamp and Platform resized to fit a 15mm space left on C-Clamp (Designed by Wilco)
Just a reupload of a resized Stamp and Platform to fit the 15mm space between the C-Clamp and a wood panel. Original model: https://www.printables.com/model/9182-c-clamp-g-clamp-01-04-smart-infill-better-clearanc By: Wilko
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
PrintablesCapt_Napalm
MLOK Railcover - 3Slot w/ Diamond Grip Texture
Slim fitting 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
- Downloads
- 30
- Likes
- 7
- Rating
- 0
P
PrintablesFreakzeug
Aimpoint mount a'la wilcox
Hardware you need: screw M5x30mm + M5 nut 4x screws M3x10mm
- Downloads
- 29
- Likes
- 0
- Rating
- 0
P
PrintablesV-Labs
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
PrintablesJoeMikeMakes
Railcore II 300 w/Bondtech Palette 2 (Pro) mount
This is a remix of thing: https://www.thingiverse.com/thing:2700231 I found that the original did not leave enough clearance for the inset ptfe fitting that this covers on the top, as well as blocked the idler from fully closing. Please…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
Printablesdick doc
Silcock Handle (for 16 point splined stem)
Had a gate valve handle crumble into pieces and other spare parts didnt fit the splined stem so I tried buying one from local hardware shop for a couple buck but still, that did not fit due to the number of teeth … So i just deceided to…
- Downloads
- 28
- Likes
- 0
- Rating
- 0
P
PrintablesRailCoreLabs
RailCore® Mini
RailCore® Mini Railcore is a family of Core-XY based Reprap 3D printers designed by J. Steve White, Tony Akens, and Ben Withem. Build of Materials A BOM is provided with links to where you can source the parts and available aluminum…
- Downloads
- 28
- Likes
- 17
- Rating
- 0
P
Printablesibash
Railcore Side Mounted X Endstop
My railcore has a halo with magnums on the top, and misumi corner brackets on the bottom. So mounting the x endstop on the top or bottom of the extrusion is a pain. This x endstop mounts on the same side as the linear rail. Hardware: Two…
- Downloads
- 27
- Likes
- 6
- Rating
- 5
P
PrintablesMatt W
Railcore II Voron "Sexbolt" Endstop Mount
This is a remix of the Voron mount from Hartk123: https://github.com/hartk1213/MISC/tree/main/Voron%20Mods/Voron%202-Trident/2.4/Voron2.4_SexBolt_ZEndstop I used the hardware kit from KB3D:…
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
PrintablesThehead
Railcore Mosquito Orbiter V2 mount
See LGX page for hardware details as it is the same. BL-Touch offsets are: dY = 23.39 dX = -7.13
- Downloads
- 27
- Likes
- 4
- Rating
- 0
P
PrintablesAldehyde Designs
Daedalus 2024 Update Project (RailCore II)
Video Series Link: This is my entire Daedalus Upgrade project that I've been working on for the past 4-5 months. I've uploaded all of my files here for you to embark on this journey if you'd like or take parts of my build and make it into…
- Downloads
- 26
- Likes
- 8
- Rating
- 0
P
PrintablesEmpiricus
Railcore II Y carriage for Dual extrusion
Railcore II Y carriage for Dual extrusion using the Bondtech BMG-X2 EXTRUDER and E3D Chimera. 2x GDStime Technology 24V 0.1A 40mm blowers for cooling. I use a Omron E2B-M12KN08-WP-C1 2M inductive probe with this. Slight updates and all is…
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
Printablesjslaker
Railcore Orbiter v1.5 Mount
Mount for the LDO Orbiter v1.5 on the Railcore. Tested with the MRW native Mosquito mount. Two versions: Mount for the Orbiter only Mount for Orbiter with additional hardpoint for the 5015 Mosquito Duct Two M3 heated inserts required for…
- Downloads
- 25
- Likes
- 0
- Rating
- 0
P
Printablesrevere521
TheFilclone - A Filco Compatible 87 Key Mechanical Keyboard
Since I designed a designed a Filco - compatible keyboard case that emulates the shape of the Drop CTRL, it was logical to also just design one that was similar to the majestouch...so i give you TheFilclone! My intention again was to…
- Downloads
- 25
- Likes
- 12
- Rating
- 0
P
PrintablesJohnOCFII
RailCore II Logo
Simple logo test print for the RailCore 300ZL. Print instructions Printer: RailCore II 300ZL Rafts: No Supports: No Resolution: 0.20mm Infill: 20% Filament: Inland PLA Gray
- Downloads
- 25
- Likes
- 0
- Rating
- 0
P
PrintablesJames
Railcore dragon burner toolhead bracket
I am using this cowl, https://www.printables.com/model/851245-dragon-burner-bltouch3dtouch-cat-cowl-remix
- Downloads
- 24
- Likes
- 0
- Rating
- 5
P
Printableswarpster
Railcore II Cable management, Toolboard Enclosure for Hemera.
These are additions I made to my Railcore II printer. Included is a cable management system, a Hemera toolboard.BLTouch mount and Duet Filamant Monitor mount. These are made to mount to the Mandela Rose Works Hemera Mount and Idlers. I…
- Downloads
- 23
- Likes
- 6
- Rating
- 0
P
Printableswuetr
ProverXL V2 4030 - Y-Railcover
Part to connect HGR15 Dustcovers to the ProverXL 4030 V2 Based on my Upgrade “PROVerXL 4030 V2 - Ultimate Linear Rail Upgrade” which can be found on wntr3d.etsy.com
- Downloads
- 22
- Likes
- 5
- Rating
- 0
P
Printablestoninr
ilco X151 TR39 Key cover plates
The ilco X151 TR39 is a key model used mainly by old cars of the Toyota brand. They generally don’t come with a cover plate which make them look quite ugly in my opinion. You will need to print the two halves (which are identical) and…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesPrintedSolid
RailCore Goodies
Here is everything I created for my Railcore build. There is the laser cut doors for both 300ZL and 300ZLT with a mount for the Duet PanelDue 5i. The side panels for 300ZL and 300ZLT with the cutouts for an Ultimaker Spool holder. Here is…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
Printablesjslaker
Railcore XRAT 2.0: Absolute Overkill Edition (X Rail Alignment Tool)
This is a major redesign of the XRAT (X Rail Alignment Tool) for the Railcore II. The basic principle is the same and the same operating instructions apply, but there are a number of improvements based on feedback from the community:…
- Downloads
- 21
- Likes
- 7
- Rating
- 0
P
Printablesjslaker
Railcore II Adjustable Foot
This is a remix of the standard Railcore II foot edited to add height adjustability to compensate for uneven or bowed work surfaces. Use three standard Railcore II feet with this assembly in one corner, then set the height of the adjuster…
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
PrintablesCynical Owl
Railcore II BMG + Precision Piezo Orion - Printed Y-Carriage
Railcore Bondtech BMG & Precision Piezo Orion Mount(s) This is a lengthy ReadMe that includes printing suggestions and required additional hardware. Additional components are listed at end, including required Piezo Mount. Update March 2…
- Downloads
- 20
- Likes
- 5
- Rating
- 0
P
Printablesplc268
Railcore linear rail alignment jig for halo top
Just a jig to align the rails in the center of the extrusion. This is redone to accomodate the extra thickness of the optional aluminum halo top. I recommend printing it in PLA, just because it's stiffer than PETG. Print Settings…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesJohnOCFII
Bento Box Base for RailCore
The BentoBox is a fine air cleaner using both carbon and HEPA filters with fan-powered air movement. The RailCore printers (and perhaps others) use 1515 extrusion as framing material, and I wanted the BentoBox stack to fit more tightly…
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesCynical Owl
Railcore II Aluminum Y Carriage Belt Retainer
Railcore II Aluminum Y Carriage Belt Retainer Rebuild/Remix of the Aluminum Y-Carriage Belt Retainer for the Railcore II. Changes include: Includes a Support Blocker stl - supports are not required inside the tension bolt tube and I found…
- Downloads
- 18
- Likes
- 2
- Rating
- 5
P
PrintablesCynical Owl
Railcore II E3D v6 Threaded Heatsink Precision Piezo Mount
Railcore II E3D v6 Threaded Heatsink Precision Piezo Bottom Mount Bottom mount for the Precision Piezo Orion z-probe and E3D v6 with the Threaded Heat Sink. Part of the Emma Puggle Railcore II component set. Part of the Emma Puggle…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesCynical Owl
Railcore II Drag Chain Solution
Railcore II Drag Chain Utilizes 20mmx10mm drag chain to clean up cabling. Uses approximately 25 chain links. The Motor Side attaches to rear of your extruder motor. I added some thin (2mm) cork between the motor and part to give a bit of…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
Printablesibash
Euclid Corner Mount for Railcore with Misumi Brackets
Based on the euclid railcore corner mount . This removes a bit of material from the corner mount so that the mount can be pushed higher. You probably don't want the exact model here, instead duplicate the onshape file and change the value…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesThehead
LGX Mosquito Euclid probe mount for Railcore
Here is a early design for the Railcore using the LGX extruder with the Mosquito hotend and Euclid probe. The .step file has been uploaded, so feel free to modify it as needed. My guess is that the euclid probe mount area will need to be…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesCynical Owl
Railcore II BMG + Precision Piezo Orion - Aluminum Y-Carriage
Railcore II Bondtech BMG & Precision Piezo Orion Mount Mount to allow use of the Precision Piezo Orion z-probe and BMG Extruder on the Railcore II with the ultralight Aluminum Y-Carriage. For a printed parts only version see my thing at…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
Printableswouldstain
PanelDue 7i Railcore cover friendly mount
This is a remix of the Lumberjack Engineering design found here . Same issue apply re: clones / off-brands. I have the MRW cover and related cover interface components installed on my 300ZLT which pretty much renders all of the 1515 rail…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesPat T
Railcore 300ZL Z Tools
Here is a simple set of Z axis calibration tools. Use the step(or gauge block) to set either 25 or 30mm base resting height of the Z axis rails when loose. Center the rails to the extrusion with the block and tighten. Attach the yokes to…
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
Printablesferrou5
Mosquito Hotend Hardmount for Railcore II
Wanting to make use of the Mosquito Hotend's ability to do single-hand nozzle changes, I decided to print a hard mount to adapt my railcore from the groovemount adapter that comes with the kits. I originally chose the SE-designed adapter,…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printablesveng1
RailCore SlipFit Electronics Box
When I decided to reprint the RailCore Electronic Box corners in a different color, I figured in true RailCore spirit, I'd just redesign everything. The corners do not require screws to hold in the sides as they just slide in and include…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesSaitara
Maxiwatt silcone sock with thermistor at bottom MOLD
sock mold with the heater and thermistor on the bottom. the shell is a two part design that needs 4 m3 bolts with nuts. after assembly of the shell follow the instructions of the original designer. After the silicone cured and "hardened"…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesMatt W
Railcore Halo Mount for Articulating Raspberry Pi Mount
I like the Prusa articulated camera mount but none of the options mounted very well to the 1515 profile and Halo on my railcore. Print Settings Printer: Railcore 300ZL Rafts: No Supports: No Resolution: 0.32mm Infill: 20% Filament: Atomic…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
Printablesplc268
Door knobs for Printed Solid's Railcore doors
I don't have these doors, but a user on the Railcore discord noted that the Printed Solid doors have a 19mm opening to use as a finger pull. These knobs are designed to go through the finger hole and thread on with the printed nut. Print…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesThehead
Railcore mount with LGX Mosquito using Super PINDA probe
This is a prototype, fyi. I've printed it but have not tested it yet. The Pinda probe install into the mount is very tight but is manageable. The use of a heat set insert in the pinda probe mount with an M3 screw will secure the probe…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesSteveDallas
RailCore Ebox mount for Lumberjack Engineering PanelDue case
This is a mount to attach the Lumberjack Engineering PanelDue (5i or 7i) case to the top front corner of the RailCore II series electronics box. Link to the case model: https://www.thingiverse.com/thing:2799628
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesAlex
Silco Cosplay front clasp
Model of the front clasp for Silco cosplay, for resin printing printed on a Anycubic Photon 4K
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
Printablessatre
RailCore Y-Rail Alignment Tool Y-RAT
Railcore Y-Rail Alignment Tool (Y-RAT). Will work with or without halo. Use these tools together with clamps while tensioning your belts to make sure your Y-rail stays parallel to your right 1515 extrusion. There are tabs at the bottom of…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
Printablessatre
Railcore II 300 ZL Electronics Box Corner Wago and Heatserts
This is the https://www.thingiverse.com/thing:3542340 modified for heatset inserts. It's for WAGO 222s (old style). If you have the new style WAGOs (221s) print this one: https://www.thingiverse.com/thing:3914814 Initeq (Amazon) inserts…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesRiC0_MD
RailCore II Cable Clip - Side Mount
I wanted to retain the functional of the Filastruder Railcore cable clip, but I was putting interfaces for the enclosure on the top of the printer so I wanted a clip that side mounted. Print Settings Printer: Railcore II ZL 300 Rafts: No…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesFanatical Detail Maniac
Alternative feet for Railcore Mini
This is a more rigid two part foot that ties a long m3 machine screw into the extrusion end as well as interfacing with the 1515 extrusion on both sides. This requires ultrasert II heat set inserts, I get mine from Filastruder. Others may…
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesRobert
Magnetic Door Latch for Railcore II
This is a Door Handle for a Railcore II 300ZLT using a large single door. I wanted a simple magnet/latch solution for the door. Using the parts I had laying around I came up with this solution. Parts needed: 3 - M3x12mm Socket cap screws,…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesEduardo Gabriel
Philco Pas40000 Vacuum Cleaner holder
This is a spare part for the Philco pas4000 vaccum cleaner holder. I basically got a image of the real one, get the reference of the real dimension and sketch over it. This is not a copy its only something that follow the original idea,…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
Printablesjslaker
Flex Plate Hanger for Railcore Side Panels
A simple hanger designed to store flex plates on the side of the printer when not in use. There are two variants: one with through holes sized for the 5.3x51.mm BOM heated inserts and another for McMaster P/N: 94459A130 4.7x4.3mm inserts.…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
Printablesjslaker
Railcore XRAT (X Rail Alignment Tool)
NOTE: This thing has been semi-superseded by the XRAT 2.0 . The old design still works fine, but if you're working on a new build, I would suggest considering the 2.0. That said, it is a slightly harder print and does require additional…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
Printablessatre
Railcore Emergency Stop
You will need: Any 19mm diameter emergency stop latching button. The one pictured works great and can be found here: https://smile.amazon.com/gp/product/B07FRYD9WK/ SPDT power relay: https://smile.amazon.com/gp/product/B07587NZTC small…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesFractalengineer
Flex3Drive Railcore II Custom for Mosquito Hotend
This pack contains my customized Flex3D mount for Railcore II. It contains: -G5 base with integrated mounting bracket Allows lightening up the gantry, lower the filament path to an absolute minimum, and gain over 10mm in Z travel. Also…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
Printablesjotafabric
Philco Cooktop Knob
This is a replacement model for a Philco cooktop knob.
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesEmpiricus
Another Hemera mount for Railcore
More compact E3D Hemera mount for the Railcore. EBM-PAPST RLF35-8/14N 5cm blower and Omron E2B-M12KN08-WP-C1 2M probe. You have to turn around the Y-Rail to get 30x30 cm xy Support only around the opening for the blower. New blower shroud…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesAtr6x
Snailcone
Story: From the sprinkle-coated trails of the Sundae Garden comes Snailcone , the slowest scoop in the dessert world. With a creamy swirl shell perched on a waffle cone base and a cherry riding shotgun, Snailcone isn’t in a rush—good…
- Downloads
- 12
- Likes
- 5
- Rating
- 0
P
Printablesveng1
Railcore ZLT Flipped Yoke Alignment Tool
This is a taller Z alignment tool for the Railcore ZLT when the yokes are turned over although it will work with the standard ZLT. Because the ZL does not have bearing holders, it is not required. The model is intended to print large side…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesEvan
Railcore II NEMA23 Stepper Mount Rear Riser
When attaching NEMA23 stepper motors with damper to my Railcore® II ZLT, I found that the shaft of the rear stepper just barely fit into the pulley. I created this riser to fit between the top extrusion and stepper mount, raising the…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesNodsch
Prestige 2PK Pro_ Tailcover
ein Einfaches Druckteil um die Heckanlenkung der Prestige zu schützen
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesPat T
Railcore 300ZL single acrylic door mag latch and door pull set
Print at least two latches and one door pull. Set latches at desired location, mark, and drill with 3mm drill bit. Superglue magnets to door pull. Once dried, attach second magnet(s) to each mag latch, apply superglue, and press into frame.
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesKj_temmes
Tailcover Ultima2
Tailcover for F5J glider Ultima2 Protects the tail while transporting. Here is link if you wanna mix my design.... https://cad.onshape.com/documents/2a96c057ee259285fd601eab/w/7a59d90345ec40e738353b7d/e/ae0c921d179c08a741a73417 Print…
- Downloads
- 12
- Likes
- 0
- Rating
- 0