Search results: indo

Sort order

Counting matching models…

P
PrintablesJohn Doe

Simple Indoor Glider V2

This was printed on the Bambu P1P and printed in 23 minutes(17 minutes of actual printing) with white PLA basic. It used just under 10 grams of filament. Check out the Makerworld profile…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
27,282
Likes
5,133
Rating
4.78
P
PrintablesAinon3Dtisk

Door stop, window stop

Hello, Today I have a Door stop for you. It works well and holds doors or windows really well. Ideal when it is drafty. I used PLA/PETG Basic as the material No need to use supports If you are interested in my work, the links are here:…

Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant

Downloads
6,794
Likes
1,055
Rating
4.84
P
PrintablesManeria

Window Stop

This is my version of a Window Stop. It works very well :) Second Version is thicker: 7mm thick arms each side and rounded corner :) Print instructions I print it with 15% infill, PETG

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,966
Likes
410
Rating
4.71
P
Printablesözcan inan

Window Stopper (Stoppy)

Inspired from existing "Stoppy Stoppy" stopper available in the market.

Print approx. €2.80–€3.43 excl. taxPreliminary estimate for one variant

Downloads
1,436
Likes
102
Rating
4.92
P
Printablesprodigy8

Cat & mouse door/window corner

Cat & mouse door/window corner

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant

Downloads
801
Likes
137
Rating
4.75
P
PrintablesBuhler

Easter window hanging

Make your wife happy and print this out for her. Update: Increase size of "Happy Easter" so not so fragile.

Print approx. €4.66–€5.69 excl. taxPreliminary estimate for one variant

Downloads
637
Likes
81
Rating
5

Smartphone mount for indoor rowing machine (Concept2 Rower PM5 monitor)

You want to use your smartphone on a Concept2 indoor rowing machine, and not ruin your posture while doing so? Now you can! As a rowing coach I did not like it when my rowers put their smartphone on the handlemount, because it makes them…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
501
Likes
49
Rating
5
P
PrintablesGlennovitS 3D

MimimICE (scraper for your car-window or printer-bed)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant

Downloads
404
Likes
80
Rating
4.86
P
Printablesclausb007

Halloween door, window, or wall decoration / Halloween Tür-, Fenster- oder Wanddeko

The Halloween decoration can be printed in a single color or, as in my example, in two colors. To achieve this, I paused the print before the final layers (the “Happy Halloween” lettering) and changed the filament color. - Die…

Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
363
Likes
88
Rating
5
P
Printables3D-decor

Window decoration snowman - 3D printed "stained glass"

Nice winter window decoration. Printed from transparent PETG, it looks like stained glass. Print instructions The decoration is printed on a standard Prusa i3 MK3S printer with one extruder and without MMU. The colors are changed…

Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
358
Likes
64
Rating
5
P
PrintablesHeuschnupfer123

VW T7 Multivan Ventilation-Grille-Window-Adapter

As we would like to go to camping and sleep in our T7 Multivan (2023), we just needed something for the ventilation… Some kind of window adapter… So this is the result of our idea and my first own design This ventilation grille is…

Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant

Downloads
266
Likes
34
Rating
4
P

Dollhouse Double-Hung Window, 3' x 4', Scale 1:12, Movable Sashes

You can print sashes that provide 1 over 1 or 4 over 1 dollhouse windows. The flat springs on the sides of the sashes keep them in place after movement. I successfully printed everything without support. Install each sash by placing one…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
259
Likes
82
Rating
0
P
PrintablesGnilema

Caravan Sprite Europe window blinds holder.

In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
204
Likes
21
Rating
5
P
PrintablesLockdonnen

DSA Keycap 1u with Light window

In prusa slicer I recommend turning on seam position to the rear (under layers and perimeters) when making a bunch of these keys. To me it looks more tidy than random seam breaks around the keys. For the top of the key turning on…

Print approx. €1.34–€1.63 excl. taxPreliminary estimate for one variant

Downloads
202
Likes
45
Rating
5
P
Printablesdgrosserhode

1979-1995 Toyota Pickup Window Crank Knob

After buying my pickup 5 years ago without a window crank knob I finally decided to fix the problem. Here is my solution to replacing a broken crank knob. Needed material: Qty:1 Window Crank Knob (3D printed) Qty:1 Washer (3D printed)…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
186
Likes
23
Rating
0
P
PrintablesMuad´Dib

Zarážka na okno (Window stop)

Model není vhodný pro jakékoli okno. Nejdříve si změřte šířku rámu okna. The model is not suitable for any window. First, measure the width of the window frame.

Print approx. €2.05–€2.50 excl. taxPreliminary estimate for one variant

Downloads
174
Likes
27
Rating
4
P
PrintablesRo3Deee

Modular insect net frame/window

Bill of materials: PETG filament 12 M3x16 (or M3x14) screws mosquito net TPU filament (optional) superglue 2 magnets : 6x3mm Assembly instructions print the parts: assembly the rectangle frame using 4 bars and 4 corners, that snap…

Print approx. €10.83–€13.24 excl. taxPreliminary estimate for one variant

Downloads
168
Likes
18
Rating
0
P
PrintablesSaberTail

Windows 95 Start Menu Button

A replica of the Windows 95 start button. The STL model is 16 cm in the wide dimension and about 6.4 cm in the other. The black parts of the icon are 0.4 mm higher than the colored parts. I printed most of it with gray filament, switched…

Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant

Downloads
154
Likes
62
Rating
5
P
PrintablesRshar27

Tesla Model XYS3/Cyber Charger Holder Indoor/Outdoor Heavy Duty

The Tesla Model XYS3/Cyber Charger Holder embodies a sleek and weatherproof design, crafted to withstand outdoor elements while maintaining its aesthetic appeal. Engineered for durability, it ensures long-lasting performance, seamlessly…

Print approx. €10.70–€13.08 excl. taxPreliminary estimate for one variant

Downloads
148
Likes
10
Rating
5
P
PrintablesAdam

Wall Mount Extension for Ring Indoor Cam

This wall mount extension helps position your Ring Indoor Cam when a flush mount doesn't work. It moves the camera's included mounting bracket slightly away from the wall, at a 30 degree angle. There is also a small cable management…

Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
16
Rating
0
P
Printablesmedienlampe

Bosch Cool (2000)/4000/5000 Fast & Simple Window Hose Adapter (STEP file included)

Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…

Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
140
Likes
11
Rating
0
P
PrintablesTperroneDesign

Window Bird Feeder Remix

Great original model by Whity . After printing the original version I decided to make a small modification. I moved the position of the upper suction cup mounts to allow for better viewing of the birds, and I made all the mounts a little…

Print approx. €4.55–€5.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
133
Likes
31
Rating
5
P
Printablesmomorientes

Ring Indoor Cam Privacy Cover

Simply print the shroud, put it over the top of your ring indoor cam and rotate it to block or unblock the cameras view. The shroud doesn't block the charging port, so it's really nothing more than a twist required.

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
131
Likes
7
Rating
4.5
P
Printablesab

Peugeot 205 Electrical Window Regulator Cover

The cover holding the window regulator switches in the front door of a Peugeot 205 (1983-1998), originally designed for a 1991 build. The originals are often heavily erroded from sunlight. No extra support needed, comes with integrated…

Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant

Downloads
123
Likes
9
Rating
0

Window Decoration - Snowflake

A snowflake which can be attached to a window with a suction cup.

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
118
Likes
20
Rating
0
P
PrintablesMike Groleau

Piper Aircraft Window Vent Scoop

Fresh air scoop for piper aircraft like Cherokee or similar. borrowed from thing verse.

Print approx. €18.69–€22.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
109
Likes
11
Rating
0
P
Printableskchrz

Mindok Desitka

Hrací žetony k Minok Desítka Tisknout vzůru nohama, bez podpěr. 0.10 mm Fast Detail

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
106
Likes
7
Rating
5
P
PrintablesMuad´Dib

Zarážka na okno s dírou (Window stop with a hole)

Model není vhodný pro jakékoli okno. Nejdříve si změřte šířku rámu okna. Tento model je remix mého předchozího modelu. Je zde navíc díra, která slouží na provlečení provázku. Provázkem pak můžete přivázat zarážku, aby nevypadla z okna.…

Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
11
Rating
4
P
PrintablesKaktus22

Window handle repair set

Window handle repair set

Print approx. €0.76–€0.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
14
Rating
0
P
PrintablesSanyi

Spirit island town with windows and doors (remixed)

Town token in Spirit Island board game.

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
77
Likes
12
Rating
5
P
Printablesunit

Flower box holder for plastic window - Držák truhlíku na plastové okno

Tento držák truhlíku s květinami na plastové okno vydrží i velký vichr a vaše truhlíky z okna nespadnou - tisk PETG na MK4, 0.4 tryska, vrstva 0.2 Držák se montuje zasunutím do originální spáry pod okením rámem anení tak nutné žádné…

Print approx. €4.36–€5.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
71
Likes
9
Rating
0
P
PrintablesmuJoseph

Ring Indoor Camera Suction Cup Mount

This mount interfaces with the plastic base plate included with the camera itself via three M3 screws and two nuts. The semi-circular slot on the base allows for the camera to be rotated slightly to either side of perpendicular to get a…

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
10
Rating
0
P
Printablesmocha loaf

120mm Fan Duct For narrow Windows

a simple fan duct designed for 120mm computer fans. This housing allows for ventilation through narrow slot type windows often found in high rise buildings. This is a great tool for removing smoke or fumes in a building with slot type…

Print approx. €11.29–€13.80 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
12
Rating
0
P
PrintablesZoulluk1

Window Hook / Háček na okno

[CZ] Tento praktický háček je ideální pro zavěšení vánoční výzdoby či jiných dekorací na plastová okna. Jednoduše ho nasadíte na rám okna – bez nutnosti lepení nebo šroubování. Háček je navržen tak, aby byl šetrný k povrchu oken a zároveň…

Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
12
Rating
0
P
PrintablesDrak

Easter Bunny Wall Art Window Decoration - Drak

Check out rest of my Easter decorations here --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and…

Print approx. €4.34–€5.30 excl. taxPreliminary estimate for one variant

Downloads
52
Likes
18
Rating
0
P
PrintablesMBLX

Motorhome Window Blind Repair Kit

Commonly failing plastic components in motorhome window blinds can be a persistent issue. This repair kit provides a durable, 3D printable solution to replace worn or broken parts, restoring full functionality to your blind system.…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
12
Rating
0
P
PrintablesLedeev001

Hook for jammed Velux Integra window

This is a simple hook to allow you to unhook the chain catch from a window that is jammed. Useful in emergencies! Gcode is for a Mk3 Prusa.

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
44
Likes
6
Rating
5
P
PrintablesDrak

Fox Spring Wall Art Window Decorations - Drak

Check out rest of my Spring decorations here --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and…

Print approx. €3.23–€3.94 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
21
Rating
0
P
PrintablesJPMakesStuff

HomeSeer door/window sensor spacer

The door trim makes the sensor body too far away from the actual door, so the solution is to put this spacer under the magnet which mounts to the door. Designed to match the same shape as the HomeSeer HS-DS100+ Z-Wave Door / Window Sensor…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
39
Likes
6
Rating
0
P
Printablestvor3d

window blind wand holder (5mm)

recommended printing on ASA filament, of course PLA or PETG is fine

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
7
Rating
5
P
Printablespapierclipje

Clip for in window insect screen / inbouwhor klip

I could not find a vendor selling these bits, the screens are quite old. the plastic of the clips holding the screen in place have all deteriorated. I used PLA but it's probably better to use a more weather resistant or a bit more…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
2
Rating
5
P
PrintablesTperroneDesign

Window Mount Hummingbird Feeder

This is a window mount hummingbird feeder. I thought it would be fun to see them up close in the window. I also included a picture of the suction cups I used. Note: I've been having better luck with ABS material for watertight prints.…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
38
Likes
11
Rating
0
P
Printableslual

Internorm/Roto window - lower hinge cover replacement

This is the cover for the lower hinge. You can find the matching cover for the upper hinge here . You may need to mirror it in the slicer, depending on whether the door is hinged on the left or right.

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
4
Rating
0
P
PrintablesPaul Cobbaut

Playmobil Western house window

What? The windows on the oldest Playmobil Western Houses like 3421, 3422, 3423, 3424, 3425, 3426, 3427, 3428, and 3430 sometimes break. These two piece allow for repair. 3D-print I print it with organic supports on build plate, though it…

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
4
Rating
0
P
PrintablesKakemonster

Window Regulator 6205-25-016821P

Retrofit of window regulator 6205-25-016821P, used for WV / Audi. Printed mine in PTEG with supports, although the supports can be tricky to remove inside the small gap. Clips easily onto frame and was easy to mount correct. Included the…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
2
Rating
0
P
PrintablesLukas

Window dehumidifier

Story: We have recently moved into a new apartment. It is a nice flat, but pretty old. The bedroom and living room have two rows of windows each. During the winter months a lot of humidity accumulates between those windows. In order to…

Print approx. €11.47–€14.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
9
Rating
0
P
PrintablesWil

Geometric Snowball Ornament w/ Window (2024)

A randomly generated geometric snowball ornament! The main body should be printed with support, mainly for the step at the opening and highest inside area. The window was printed in clear PETG on a small piece of glass from home-depot…

Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
12
Rating
0
P
PrintablesKillingThunder

Eufy IndoorCam P24 Prusa Enclosure Mounting

I created a simple mount for my Eufy IndoorCam that fits in a top corner of my Prusa Enclosure. It has four holes in it that needs to be filled with threaded inserts for M3 screws. I am using the normal ones from CNC Kitchen but you can…

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
9
Rating
5
P
PrintablesToník

Small paper clip with window

This is a paper clip with a rectangular hole for displaying the selection. I recommend printing the entire clip from PETG so that the clip is flexible enough, but you can also use other filaments. Size of the entire model: 17x10x1 mm (can…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
14
Rating
0
P
PrintablesVersiXP

Longer 12cm Window Hook

Its a longer Window Hook, when you have big stars to hang on your window, without laying on the window itself. I printed mine with PLA, but for stability, i would recormend printing it with ASA/ABS.…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
29
Likes
6
Rating
5
P
Printablesoliverschebesta

simple wallmount for a Netatmo Indoor Module

ideally printed in white, so it fits nicely to the design and colors of the module itself

Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant

Downloads
29
Likes
4
Rating
0
P
PrintablesAlpacaBuilds

Aqara Door & Window Sensor Trim Shim

This model is for the Aqara Door & Window Sensor (affiliate link), and helps you level the two pieces inline with any door or window trim. My door has a ½ inch trim that frames it, and makes it not possible to keep the two pieces of the…

Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
4
Rating
0
P
PrintablesSam Thomas

Window screen frame for Suncast BMS8780T garden shed

Easily add window screens to your louvered air vents to keep bugs out of your garden shed. Use PETG filament for outdoor use. No supports or brims. Print 2 frames. Apply outdoor rated 1" wide double stick tape to back side of frame. After…

Print approx. €4.63–€5.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
6
Rating
0
P
PrintablesTurbopstros

Dead Hands - Simple Halloween Window Decoration

Transform your windows into a scene from a horror movie with these eerie reaching hands! Watch as trick-or-treaters do a double-take when they spot these haunting silhouettes pressed against your glass, creating the unsettling illusion of…

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
8
Rating
0
P
PrintablesHardworkingDog

Love Window From Tomodachi Life

In the 3ds Game: “Tomodachi Life” when a Mii is in love this icon shows up in their window! I've made 2 other models so far which I've put into a collection so check that out! Also I have been using an Ender 3 Pro for this so I don't know…

Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
4
Rating
0
P
Printablesfwartner

MI Light Detection Sensor Window Holder

I printed the prototype with PETG.

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
19
Likes
0
Rating
0
P
PrintablesJPMakesStuff

Window hold-open bracket

Designed to fit Simonton Brickmould 300 double hung windows Great for listening to the rain, but not letting the rain in since the only gap is at the top. Picture shows a top-down view Must print with PETG to avoid sunlight warming and…

Print approx. €6.04–€7.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
4
Rating
0
P
Printablestom

Haken für Fensterdekorationen/ Hooks for window decorations

Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu…

Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
1
Rating
0
P
Printablestom

Noch ein Haken für Fensterdekorationen/ Another hook for window decorations

Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Die Ausladung beträgt ca. 80 mm. Die Befestigung erfolgt mit Powerstrips Large, die Fläche ist dafür 45 x 25 mm groß. Die nicht klebende…

Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
4
Rating
0
P
Printablesseekerbot

Seitz motor home / caravan window spare part

On my window the support was broken. I made a spare part to make it functional again.

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
1
Rating
0
P
PrintablesM3D

macOS Window Control Magnets

About Fridge magnets that are designed to look like the window controls inside of macOS. Includes the three different versions of the „expand“-button. Magnets The parts are designed to fit a D6x3mm magnet on the back. The magnet should…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
4
Rating
0
P
PrintablesH3dSprint

Handgrip for french window

The handgrip is printed with PETG and do not need supports. To fix the handgrip, I recommend countersunk head screws for woodworking with a diameter of 4mm (core drill hole diameter: 3,5mm).

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
3
Rating
0
P
PrintablesLolman_16

French window handgrip

I couldn't find a French window handgrip which uses screws to mount it. I use the original screws. Uses two screws with a diameter of 3 mm. Supports: Yes Printer: Creality Ender 3 Infill: 20% Filament: Aurapol PLA White

Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
0
Rating
0
P
PrintablesPapaMike

Indoor Motion Sensor Adapter/ Bewegungsmelder Adapter HOFTRONIC/ Spelsberg

Adapter for indoor motion sensor I designed this adapter for an indoor motion sensor from HOFTRONIC™. It can be mounted directly to the ceiling junction box U86 from Spelsberg. Optional two cable channels with 15mm will cover the wires to…

Print approx. €3.12–€3.82 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
0
Rating
0
P
Printablestom

Haken zur Befestigung von Fensterdekorationen/ Hooks for attaching window decorations

Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu…

Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
2
Rating
0
P
PrintablesHardworkingDog

Friend Window From Tomodachi Life

I used Tinkercad to make this and I don't know if it works with all 3d printers or whatever you're using it for. Feel free to remix it I'm not a huge creator. Hope you have fun with it! -HardworkingDog (P.S. Sorry the image quality sucks…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
1
Rating
0
P
PrintablesHardworkingDog

Problem Window From Tomodachi Life

This model is like the other one I have made but this time it's the problem icon! I've been using an Ender 3 Pro to print these (I know it's kinda old to some of you) so be cautious when you print this I'm guessing it'll work with other…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
3
Rating
4
P
Printablesdjedi

Hook for Aluminum Windows

A hook to clip in aluminum windows gutter. I put the picture of the dimension of the profile I clipped the holder on. I print with 0.2mm layer height. I add brim and support to increased the print surface on the plate.

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
0
Rating
0
P
PrintablesPavel Míka

Avia Truck Window Latch / Lock Replacement (Avia A21 / A30 / A31)

Overview A functional replacement window latch / clip designed for vintage Avia trucks (frequently used in classic European fire trucks and utility vehicles). This part attaches to the side window mechanism to keep the window securely in…

Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1
Likes
0
Rating
0
P
PrintablesMartin Rigatoni

Indoor Boomerang - aka Roomerang

This very simple boomerang is only two layers thick and uses less than 5 grams of filament. If thrown correctly, it will fly around a two meter wide circle and come back to your hands! Printing and post processing: Print it at 0.2 mm…

Downloads
15,158
Likes
2,177
Rating
4.8
P
PrintablesDaridam

Christmas gnomes - door, window, wall decor

Edit 27. 12. 2023 Now you can also print a napkin holder with these gnomes! https://www.printables.com/cs/model/695300-napnik-holder-with-gnome Edit 10. 12. 2023 Thank you so much for all the downloads! I was so happy for the first 100 in…

Downloads
8,411
Likes
1,709
Rating
4.98
P
Printablesecoiras

Joycon Grip with Front-Looking LED Windows

A Nintendo Joycon grip with front-looking windows for the LEDs. It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º…

Downloads
5,310
Likes
1,015
Rating
4.89
P
PrintablesJohn Doe

Giant Indoor Glider v4

Prints on the Bambu P1S in exactly 30 minutes with the provided 3mf file. Print in PLA with 100% infill. Be careful not to bend the wings while removing from the build plate. Once you take the glider off the build plate, flip it over(flat…

Downloads
5,152
Likes
619
Rating
4.83
P
Printables3dprints4life

Snowflake Ornament Collection - 18 Snowflakes (window or gift decoration - Christmas)

18 Snowflakes with approx. 50 x 50 x 2 mm for Christmas decoration. Put your favorite snow flakes on your window, gifts or decorate your Christmas table. 09.12.2025: Added two more snowflakes See also my original snowflake collection with…

Downloads
4,770
Likes
602
Rating
4.92
P
PrintablesNordic Creativa

Indoor Plant Pot with Drainage and Drip tray

🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…

Downloads
4,394
Likes
1,163
Rating
4.92
P
PrintablesBINGOBRICKS

Harry Potter Book Box (Gryffindor)

This is a box in the shape of a book on the theme of Harry Potter. The book cover is adorned with Harry Potter lettering and the Gryffindor coat of arms. To complete the hinge of the book cover, you need a piece of filament (1.75mm) that…

Downloads
3,750
Likes
886
Rating
4.94
P
PrintablesTimmaey

Flex-Hex-Hook - TPU Door & Window Stopper

EDIT 02.03.2026: Added an alternative version with grip grooves, which can provide improved grip in certain door and flooring combinations. The Flex-Hex-Hook is a compact, flexible door and window stopper optimized for TPU printing. The…

Downloads
3,056
Likes
742
Rating
4.81
P
PrintablesGavBro

Indoor Golf Hole

I created a golf hole inspired by a product from the putter designer, Scotty Cameron. If you miss the hole, the ball has a little track to slingshot back towards you. *The model as a very thin floating solid section but should not come…

Downloads
2,957
Likes
406
Rating
4.95
P
PrintablesMukkeNiels

Window ventilation adapter 100mm

Can be used horizontically or vertically. works with 100mm tubes.

Downloads
2,762
Likes
1,274
Rating
5
P
PrintablesMagnavis

The Sword of Gryffindor

THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ - Twitter & Instagram If you would like to show some support for my files, you can do so here:…

Downloads
2,595
Likes
540
Rating
5
P
PrintablesFilcuk

Air Duct Window Vent [r.4]

A vent to mount onto a window with a 100mm air duct adaptor. It can either be ‘hung’ from an airing window, or placed horizontally in a standard window. The vent area is ~62 cm², which is close to the adaptor/hose area of ~65 cm² (worst…

Downloads
2,576
Likes
726
Rating
5
P
PrintablesAlex W.

Modular air conditioner hose adapter for window / Modularer Klimamobil-Abluftschauchadapter für Fenster

Update: anbei der Modellink zu thinkercad . Besonders in diesem Sommer hatte ich einige Update- und Remixanfragen zum Modell. Ich will das Modell mit euch teilen, fühlt euch frei es für eure Zwecke zu optimieren. Damit lässt sich die…

Downloads
2,416
Likes
165
Rating
0
P
PrintablesMarkus

Hogwarts House Crests Gryffindor Slytherin Hufflepuff Ravenclaw

This is a Version of cncmodels4you 's hogwarts house crests found on Thingiverse https://www.thingiverse.com/thing:4541930/files I painted them in Prusaslicer with a lot of detail.

Downloads
2,404
Likes
336
Rating
5
P
PrintablesArtmonso

Indoor FlowerPot

Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor. Just glue the head with the body and enjoy it!

Downloads
2,183
Likes
586
Rating
4.85
P
Printablesteddyhatcher

Indoor Bee Hive

Instructional video below.

Downloads
2,127
Likes
255
Rating
5
P
Printableshappymaker

Adjustable Door / Window Stopper

Use it to anchor a door or window in any position. It uses a clamp-like mechanism. Screw the bolt to make a friction with a perpendicular to the door surface. A door can still be fully closed with a mounted stopper on it. Just unscrew the…

Downloads
2,058
Likes
1,055
Rating
5
P
PrintablesLuboš Novák

Air conditioner exhaust into the ventilation window

Air conditioner exhaust into the ventilation window. Výdech klimatizace do okna ventilace. Category: Household

Downloads
2,047
Likes
314
Rating
4.83
P
Printablesap.engineering

Air Scoop / Intake / Vent for Car Window

Air Scoop – Fresh Air for Cars Without A/C Stay cool on warm drives without air conditioning. This Air Scoop mounts securely to your partially open window and channels fresh outside air directly towards the driver. It uses a cap that…

Downloads
1,821
Likes
514
Rating
5
P
PrintablesSINGH DESIGN

Universal Indoor Faucet Adapter for Garden Hose v2

Indoor Tap Adapter – V2 This 3D-printable adapter is designed to connect garden hoses to standard indoor taps. Easy to install and use, it requires no support structures during printing and ensures a secure, leak-free connection.…

Downloads
1,737
Likes
1,123
Rating
4.64

indominus rex

the indominus rex is the main villain from jurassic world and it is a hybrid

Downloads
1,714
Likes
65
Rating
4.5
P
PrintablesSica

Minimalist open stop Window Keeper / Wedge – Fast Print, No Supports

Tired of the wind slamming your PVC windows shut or swinging them wide open? This 3D Printed Window Keeper is a simple, highly functional wedge designed to sit securely near the hinge mechanism, keeping your window perfectly propped at a…

Downloads
1,677
Likes
274
Rating
4.63
P
PrintablesJan

3D printer ventilation system for window fit to 100mm aluminium hose

Ventilation system for 3D printer. Easy to hook to the top of opened window and connect to 100mm aluminium hose. Works greatly with QIDI plus 4 printer. Suggestion is to remove inside filter in the chamber, connect 100mm aluminium hose to…

Downloads
1,674
Likes
755
Rating
5
P
PrintablesRick Tucker

Window Seal for 4-inch Exhaust Duct

The model uses interlocking boards and a vent. The interlock is an angled dove tail that will provide a very tight seal (more air tight than the typical window seal kit). The interlocks are modeled with no clearance. You will likely need…

Downloads
1,587
Likes
304
Rating
5
P
PrintablesKdyrja

Window defrost dash vent VW/Skoda/Audi/Seat

Window defrost dash vent VW passat b5/5.5 (golf IV), Audi B5/A4/A3 (8p1). Seat (leon/toledo),….. (only modeled, untested. Sorry) driver's side the passenger side must be mirrored Print instructions Unassociated tags: audi a3, b5.5, golf 4…

Downloads
1,584
Likes
136
Rating
5

Cat in Window

These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…

Downloads
1,548
Likes
474
Rating
5
P
PrintablesJohny5

Window blind chain holder

Spare holder of the chain. For chain balls diameter 3mm. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: No Resolution: 0.15 Filament: Filament-PM PET-G

Downloads
1,463
Likes
743
Rating
4.95
P
PrintablesAeonfly

Window stopper / Fensterstopper

Eine kleine Hilfe um Fenster bei durchzug offen zu halten. Zur Aufbewahrung einfach am Henkel befestigen oder an einem Nagel aufhängen. Gedruckt habe ich den Fensterstopper in TPU damit er elastisch ist. A little help to keep windows open…

Downloads
1,450
Likes
83
Rating
5
P
PrintablesIndy Wijata

*Updated Wide Model* Detachable Velux Tilt Window Fume/AC/Printer Exhaust | 100mm/4 Inch Duct

Update August 2026 Finally put down the time to improve on this design. I managed to increase the output surface area keeping in mind of the restrictions of my current window. The slot is the same height but now 20 cm wide. Please double…

Downloads
1,392
Likes
535
Rating
4
P
PrintablesIze

150mm Klimaanlagen Adapter für Fenster / 150mm Air Condition Adapter for Windows

DE (EN see below): Einfaches Klicksystem um 150mm Klimaschläuche an einer Durchführung im Fenster oder einer Tür zu befestigen. Funktioniert sowohl für harte PVC-Schläuche als auch weiche Soft-Schläuche (z.b. Kaltluft-Ansaugung). Das…

Downloads
1,349
Likes
166
Rating
4.44
P
PrintablesJarda

Window for dollhouse

Window for a dollhouse Print instructions Kompletní okno je tvořené z 3 částí . 2x ram-vnitrni-venkovni.3mf a 1x okno-110x60.3mf . Pokud v doménu nechcete vnitřní díl stačí vám jen 1x od každého . Je to rozdělené kvůli snaží…

Downloads
1,346
Likes
253
Rating
5