Counting matching models…
A simple design with a very characteristic feature of an inverted hexagonal pattern on its exterior Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters…
Mathematical Art: The Inverted Oloid Overview This model is a unique take on the Oloid , a three-dimensional curved geometric object discovered by Paul Schatz in 1929. Unlike a standard solid oloid, this inverted oloid features a…
Introducing the inspiring 3D model of the "Inverted Spear of Heaven," the legendary weapon wielded by the formidable warrior Toji Fushiguru. Crafted with unparalleled attention to detail, this digital masterpiece brings to life every…
This is a simple box to put a communication board of the JK-BMS inverter BMS (model JK-PB2A16S20P) that I use in my DIY solar energy storage system. Letters on the box could be filled by the nail polish or sealant to make letters stand…
You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties. Post a make :)
Housing for Interfaceboard
I made this model in Fusion 360 based of my JK-PB2A16S15P, thought it could come in handy for someone designing an enclousure or mount. Both BMS and Comms board included. Please go easy on me, I taught myself.
The cooler prints in two parts that is glued together. The three "sticks" that is printed with part 1 is used to strengthen the join. Glue them on the inside over the the join. There is a holder for the HW-585 12V fan controller You will…
A nice geometrical design using an inverted quilted pattern. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
I've been selling this on Esty for a bit now, and if you cant be bothered to buy 5 filaments for more than the sword, you can do so, but if you want to buy it for a fairly reasonable price (stand included) its about £25.…
Type: B&M Inverted Coaster Scale: 1:64 Size: ~ 27 cm x 26 cm x 34 cm Printer: Original Prusa i3 MK3S+ Settings: 0.2 mm / 30% Filament: 356 g ( Footers: 43 g, Supports: 196 g, Track: 117 g) Print Time: 44:31 h ( Footers: 3:12 h, S upports:…
Description : The Inverted Spear of Heaven is a dagger with a jitte-shaped blade. It has a «q» shaped circular hand guard that points out on the side of the longer blade. Additionally, the weapon has a black handle with a circular link at…
I love making little additions to my Giant LEGO Wreath for each holiday. I really liked this model but wanted to make it slightly easier to print. To fit in my 200% wreath I printed this model at 121% scale If you'd like to see this model…
This model is compatible with the lego system.
This model is compatible with the lego system.
I recommend either printing separately or using different print settings for each model On the bolt 30 to 40 infil (rectilinear)remove top bottom layers 17(I think) perimeters Nut print normally Recommend .16 or better but .2 does work if…
UPDATE 24 Apr 2023 : I've added a (slightly larger) version for the TP-Link Tapo C225 camera - I don't have this camera myself, but thanks go out to fellow Thingiverse user @phagosome who has printed it and confirmed that it works. The…
This model is compatible with the lego system.
This model is compatible with the lego system.
I really liked haitonno's design for this drill dust collector, but for some reason, it was "upside down" from what my Dyson would need. So, I flipped the button/lid around. Much better. I printed in 0.3 resolution, and the button broke…
TP-Link Tapo Camera Inverted Mount This is a remix / mashup of Kadows' upside-down Tapo camera stand and Cewo's Tapo base (https://www.printables.com/model/377139-tapo-base-c210). Design I printed the orignal but found that the stand was…
The parametric Autodesk Fusion file can be modified to fit your exact fan size. Excluding the air blocker plate, the model prints in four different pieces. STL files and hardware: Fit 80x80 mm and 120x120 mm fans. To mount the fans four…
I have created a support for three 92x92x38 mm fans for a Deye 6kW inverter. In summer, the heat increases the temperature, so it is used with a PWM controller that can be purchased on AliExpress, along with the fans and other components.…
This model is compatible with the lego system.
Standfuss für das Anschlusspanel des JK Inverter BMS incl. der Starttaste
Jujitsu Kaisen Inverted Spear Of Heaven. Print And Assemble Easily
Simple bracket for the JK Inverter BMS. Is required twice to attach the BMS at each end to a wall or to the battery hou
This model is compatible with the lego system.
Designed this up after rewatching Jujutsu Kaisen, takes a 1/2 in dowl through it. split for easier painting/printing. Category: Props
This model is compatible with the lego system.
Sometimes it is a bit hard to place the black cover on the bottom of the printer. With these brackets, you have an easy way to slip the cover at the right position. Even with the CNC kit mounted. Here is an example how to use it: You just…
Hello, this is a simple compliant mechanism designed to invert a linear motion. If you push (or pull) on one side the other side moves into the the opposite direction. It's still in a very early stage and the range of motion is quite…
Toji Fushiguro's Inverted Spear of Heaven for the Dummy 13 Model Scaled to a standard D13 Model (100%). Prints in two parts. No supports needed. All my other Dummy 13 models can be found here .
This model is compatible with the lego system.
All slope inverted LEGO Brick from the application LEGO Studio. 5 real Bricks LEGO (with the logo on it)
This base plate is a 1:1 re-built of the original Gridfinity “slim” plate from Zack Freedman https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 I find the magnets practical because everything stays in its…
This model is compatible with the lego system.
This model is compatible with the lego system.
A easy mod to invert your z-chains BOM: 3 x heatinserts M3x5x4 4 x M3 rollin T-nut 3 x M3 x 6 SHCS 1 x M3 x 10 BHCS 3 x M3 x 6(8) BHCS X/Y chains Printsettings: 4walls, 5 top/bottom, 40% grid infill, 0.2 layer, 0.4 width, no support.
This model is compatible with the lego system.
This piece is to support the wire channels when doing inverted electronics mod on a Voron Trident. I wanted to keep everything neat and allow an easily removable bottom panel if necessary. ABS or PETG recommended. Check sizing against…
Info: original-size casssette case with realistic tape lookalike design drawn on the case (in my previous model I have design a cassette box for storing business cards, so I have adjusted it, so real cassettes can fit in) for storing real…
Modeled myself from the offical setting informations. I found out the original design, one site of the knife should be broked, so modeled my version of this knife. Arround 40cm total lengh, revised the handle for better holding feeling.
This model is compatible with the lego system.
Jednoduché a nenáročné řešení chlazení střídače Solax X3 hybrid G4, které za pomoci tří ventilátorů a termostatu W1209 umožní vyšší průtok vzduchu přes žebra střídače. Držák rámu je upevněn za neosazené průchodky CAN1/2 a DRM/OFF. Na…
Decorate your house with this stunning inverted hex shape lampshade that you can print in Vase mode! 3mf file includes a 40mm cutout for vase mode slicing. CAUTION : Use ONLY with LED bulbs. DO NOT use old incandescent bulbs since they…
This model is compatible with the lego system.
I've remixed the Inverted Electronics & Voron Trident Lowered Z motor mounts so I can install Nema17 motor with coupler and 350 mm leadscrew as I didn't found any with an integrated leadscrew at this length for my self-sourced 300 cube…
Support to fix the inverted sander to the table. Designed for special jobs, with the power button and speed regulator free for better use. The 3D printing does NOT interfere with the removal of the battery and the dust collector.
This model is compatible with the lego system.
Use tree supports. A geometric rolling object inspired by the classic oloid shape, but inverted into a smooth continuous anti-oloid form. The model combines mathematical geometry with kinetic movement, creating an unusual rolling behavior…
Remix of Inverted Hexagonal Plant pot and Planter: non vase mode and has drainage holes.
Good for locating camera in high Z position without wall mount. Print (1) Top, (2) Bottom, (3) Pillar and assemble. tolerance is 0.2mm. for (3) Pillar, Half and Full versions are available, for your printer build volume. If you want, you…
this is my first model let me hear what you think guys
It's unlawful to waste a drop of sriracha, yet that cap makes it so hard to prop up your bottle to get every last drop. This stand allows you to invert your bottle in your fridge or countertop, assuring you still have more sauce at hand.…
3D Printed Rocket designed to fly in your local parks. The easy to see orange streamer aids in locating the rocket should it get away from you! Dimensions: Length x Body Diameter - 13 x 1 inches Fin Root Cord - 1.59 inches Assembly…
This is a 3D printed inverter mod centered around integrating a 1,000 watt pure sign wave inverter into the gen-1 Chevy Volt and does so through a custom rear hatch faceplate that adds an interface for you to remotely wire-up a hidden…
This model is compatible with the lego system.
4in Plastic Nose Cone Electronics Bay build This design is also avaliable for purchase from my webstore: https://inverted-pursuits-lab.square.site/product/4in-plastic-nose-cone-electronics-bay/20?cp=true&sa=true&sbp=false&q=false Designed…
I decided to remix my own remix :D My kit was delivered with 30mm cable ducts. They where supposed to be mounted on one panel with double-sided adhesive tape, but as I did go for the Inverted electronics mod, the cable duct should have…
A remix of BeardedJester's almost perfect painting grips that allow the inverter handle to be attached to the regular size grip. I invert models while painting too frequently to be bothered unscrewing the bottle cap and moving my model…
This model is compatible with the lego system.
This is kind of a kitbash of two different models put together. Mainly it's the Trident Inverted Electronics mod stepper mount with the cable channel from a Stevebuilds modified stepper mount. This works really well with spacers if you're…
Thanks for the “Voron Trident Inverted Electronics”-design! This is a remix of the DIN rail mounts, to be able to fit Noctua A6 fans on my Trident. Noctua A6 fans are wider than the one suggested by Voron. So I made the mount to be 6mm…
This model is compatible with the lego system.
This contraption makes it easy to get the deck panel out of a Trident with the inverted electronics mod without attaching a handle to the panel. The push-button mechanism provides enough lift to grab the panel and lift it out the rest of…
With this model you can mount your jk inverter bms on any flat surface with screws. To mount this holder to bms you need 6pcs m3 nuts, 6 pcs m3*35mm srcews.
Case for the components of a Ahoy DTU. See the Ahoy DTU Project Page on Github: https://github.com/lumapu/ahoy The Ahoy DTU allows for communicating with a bunch of Hoymiles Microinverters for small sized Solar Systems. It is even…
The Blade is smooth by default but can easily be made textured with fuzzy skin slicing. There is a hole for 6 mm wooden/metal rod for extra stability. End part has a holed version for screw eye and a ring for easy attachment of chain.…
This model is compatible with the lego system.
I made some changes on the original model making it a little big, and remade the cable guide, I also remade some other parts to fit on the printer arm. The adapter was made to invert the camera to be used upside down. The size changes…
Toji's main weapon when facing off opponents.
Spacer for mounting a Hoymiles Inverter on the wall. This was designed with the dimensions of the HMS-1600-4T model, but may fit on other models as well. There are two variants: One which resembles the slots on the inverter. One with two…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a linked dipole link which can be used with any 1.8mm OD wire. This includes the spool of DX Wire that I have here, as well as the 20 gauge silicone wire that BNTechGo sells on Amazon. I also used 2mm banana plugs to connect the…
This model is compatible with the lego system.
This model is compatible with the lego system.
Finally I decided to design a GoPro mount adapter that inverts the mounting order. Print Settings Rafts: Yes Supports: Yes Resolution: 0.4x0.2 Infill: 15% Please note this is a work in progress, you may encounter problems with some slicer.
Tested with 5080 founders edition YYMV. Uses 2 M3x4x5 mm threaded inserts .
These are a set of 5cm tall feet for the Fractal Ridge PC case. With two variants, one for VHB tape, and another for threaded inserts using the M3 screws for mounting SSDs provided in the case. This will allow the Ridge to be used in both…
Fans of the hit manga/anime “Jujutsu-Kaisen” will recognize the devastating Inverted Spear of Heaven . This was a special request for a family member who plans to use it for cosplay during the next major convention. As a one-off, I…
Turnable device for decapping honeycombs (replica of "Nassenheider Inverto"). Especially usefull for using a hot air decapping gun in one hand. Application video original: You will need: -) 1 x 2020 aluminium profile type 6 B, length =…
It is a universal ventilation system for all inverters that need additional cooling or you just want to make its life longer and lower its temperature. The individual fans can be infinitely connected together to create whatever width you…
This is a handle that you can attach to the inside bottom panel of your Voron Trident when you do the Inverted Electronics mod. Installation Use VHB tape to stick this to your panel. It's short enough that it will sit below the bed plate,…
I've lately found the aeropress to be an awesome solution for making single cup cold brew, and with the method I've landed on, it involves the AeroPress being in my refrigerator for 24 hours inverted. I developed this model to keep the…
This model is compatible with the lego system.
A set of MMS Inverters for your MMS/Picatinny use! If you need to mount male to male, or female to female, you've got options here! - MMS Short Female to Female Inverter - MMS Long Female to Female Inverter - MMS Short Male to Male…
Building a Voron Trident using the “ InvertedElectronics ” Mod, I needed to mod it to work with the Noctua A6x25. I didnt like the spacer design as it required longer screws which I didn't have. This uses only BOM hardware and doesn't…
I needed a way to mount my C200 on my Ender 5 Pro and couldn't find existing models that would work, so I modified an existing design to be suitable. I also created a new bottom part to mount on 2020 rails with M5 screws with drop in…
This is a wall mount to store an EGO power inverter. Designed for the PAD1500 but should work with any EGO battery compatible inverter. Designed to print standing vertically so the "teardrop" holes have the point at the top. Update…
This model is compatible with the lego system.
Assembly Instructions avaliable at https://inverted-pursuits-lab.square.site/ Follow the instructions for best results! Additionally needed parts - 18in Shock Cord - Spectra is reccomended - BT-20 Motor Mount Liner - can buy from Estes -…
This model is compatible with the lego system.
This is a remix of the stock Voron Trident wago_221-415_corner_mount.stl , specifically modified for builds using inverted electronics and to provide crucial clearance for the deck plate. If you're running inverted electronics on your…
Made a very nice planter hanging with different bottom for nice 2 colour prints
Spacer Plate for Hoymiles (HMS 800W-2T) to mount on flat surfaces. One model with the name “Capri-Sun” on top - because i think its funny. One model without name tag
Added some new photos of black print with added switch to turn on and off inverter Remixed dyslexicEnginers great battery mount to connect a 20 volt porter cable battery to an Everstart 70000M 12 volt power inverter. The size of the…
Some people got together to hack the communication protocol of a popular micro inverter by hoymiles so that you can see the internal values and send them on via MQTT. You can find the conversation here (in German) and the code here . I…
