77,447 models
This is my improved version of the classic Flexi Rex. Somehow this version became the most popular one, maybe just because it doesn't break easily when handled by kids (and adults of course). I uploaded this model to Printables for…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
A small, strong case with a collection of optional inserts for different uses. Case Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad Don't you hate misplacing your individual SD cards? Now…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
This adapter allows you to use Meta Quest 2 head straps on the Quest 3. Instructions: Download under ‘model files’ and print with supports. Enjoy Haydn Bao Design notes: From v4 to v5, the geometry updates are minor. There's just a few…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
A smart can opener that also works as a protective cover! Use 3 walls, 5 bottom layers + 6 top layers, 0.15 mm layer, 25% infill, no supports required. ✅ Opens drink cans easily – no more broken nails or sore fingers ✅ Doubles as a cover…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
This is a fully parametric, lidless box that I made as an exercise to learn how to use OpenSCAD. Parameters that can be changed include: box dimensions, wall thickness, corner roundedness, hex radius, and which walls of the box have the…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
Print approx. €4.26–€5.21 excl. taxPreliminary estimate for one variant
Completely print in place. No breaking it loose, no supports. Added a tree with a star and an ornament tree Nozzle: 0.4mm Layer: 0.2-0.28 (Recommended) Scale it as you like :) Legs from the famous Zou Ghost model by Tower of Creation!…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Print approx. €11.13–€13.60 excl. taxPreliminary estimate for one variant
Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
I had problems with the original Blade not locking correctly, so i made the locking parts of the blade stronger.
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
Print approx. €3.02–€3.70 excl. taxPreliminary estimate for one variant
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Print approx. €7.18–€8.77 excl. taxPreliminary estimate for one variant
A Pendulum Wave. Beautiful to watch. See it in action in the attached video. It comes with three sets of Pendula and a pusher which slots into the base. To assemble put an end cap onto the post and then all the pendula with spacers…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Print: I printed with PETG with 0.3mm and variable layer height (because of thread). A brim is recommended. Food safety: at own risk. Depending filament and print. Please let me know your experience. 2024.5.06: version without air…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Box with a rounded bottom, for easier grip on small things, such as nuts or beads. Lid with a simple locking mechanism. Includes stand 3x3 and 3x4. Double size here.
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. When building my filament…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
A structure that uses opposing tensioned strings to remain stable. A neat toy/display stand/demonstration piece/conversation starter that is a kind of optical illusion. UPDATE: I have changed the model's version to 2.0. I made some simple…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Pill organizer / vitamin reminder with a labeled slot for each day of the week. To use, loosen the screw 1 turn and twist the lid to the current day. The lid & screw are fully removable to refill the container at the end of the week. To…
Print approx. €5.39–€6.59 excl. taxPreliminary estimate for one variant
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
Print approx. €3.93–€4.81 excl. taxPreliminary estimate for one variant
Easy to make a cute Cat with Coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Cobbled together in PrusaSlicer Jupiter with the socket, printed fine from my side and looks great. Will print fine in PLA, I used Eono White PLA in 0.2mm layer height. For the light use for best fitment a E14 bulb or a small E27, the…
Print approx. €35.06–€42.86 excl. taxPreliminary estimate for one variant
Description: I loved the cat ghost that ncsandor made, so remixed it with a hollow body that should be big enough for a tealight. I also created a channel on the side to fit the wires for other lights. Printing: I printed my example with…
Print approx. €0.63–€0.76 excl. taxPreliminary estimate for one variant
This is a remix of @silviutoderita's Milk Crate - No Supports https://www.printables.com/model/732947-milk-crate-no-supports I've uploaded the Flexi Leg as a separate project so you can add Flexi Legs to anything you like: milk crates,…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…
Print approx. €3.56–€4.36 excl. taxPreliminary estimate for one variant
Introducing the Chess Rook with a fascinating passthrough illusion! This model appears to defy the laws of physics as the "male" part of the thread passes through the slightly larger "female" part. This effect is not only visually…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
This model flies really well and looks really cool! Please let the print cool down fully before carefully removing the glider as to not unevenly bend the wings. For better gliding bend the wings and tail wings slightly so there is about a…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
Update #1: I updated the models to work better with the new method, and add new stand model. I tried to make the description and the solution in such a way that it could be done easily, without special program, and knowledge. Color…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
About This Remix: This is a remix of the Sith Acolyte Mask (Star Wars) by Killonious . Killonious did a wonderful job designing the mask as a prop display mask. They also have an etsy shop . I made this remix because the mask was…
Print approx. €15.07–€18.42 excl. taxPreliminary estimate for one variant
14 Infill Samples with a case. Everything can be printed on a Prusa MINI . Simply download the 3MF file to PrusaSlicer and change the printer type. I had great success printing them in batches of 2 at a time (split left and right) and I…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Object Description: It comes too late for the prusa design contest end of 2021, but here's my version of a bag clip. Advantages: - Stable hinges - Wobble-free hinge design - Easy to close - It clamps reliably even thin bags - Marble…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Blood Type Keychain with NFC Tag (v2) This is a remix of my blood type keychain (see here ). The design has been completely reworked and is now in the shape of a blood drop . The keychain has a size of about 30 mm x 42 mm x 3.6 mm. The…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
This is my improved version of the Articulated mouse. This version doesn't break easily in the middle when handled by my cats. Printing recommendation: Infil: 0% perimeters: 3 layer height: 0.2 mm filament: PLA (It is said that PLA and…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Starting from the original model → https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit/comments published by Ruben Martins I wanted to add a spoon to the kit I designed it using Fusion 360 and printed it in white…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Drill Bit Sharpener for Dremel with true Relief Angle. This jig is using a Dremel Cutting Disk for Sharpening. The 2 Parts are held together with a M3 Screw and Nut.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
YubiKey 5C NFC Case/Keychain (USB C only) I needed something to protect my YubiKey from random bumps and scratches in my pocket. Printing in different colors to differentiate them. It is intended to use case cap as main holder of the key…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
UPDATED → 20.02. 2022 Removed bottom text due to customer comment UPDATED → 13.04. 2021 Changes: Updated STL, 3MF and G-codes Thicker bottom Reduced overhang at the handle at the bottom Thicker walls due to waterproofness. Added version…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for PETGSource material: PET
Simple Vase Mode Christmas decoration with traditional mounting hole. Take the mounting wire and cap of an old or broken Christmas ball and insert it in the cylinder. Available for 8mm, 10mm, 12mm and 16mm mounting cylinder. I used 8mm.…
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for one variant
I remixed SchuMaker's Smartphone Holder Design with honeycomb on the bottom part. Just filled the hole on the bottom with fusion360 and added a modifier to remove top and bottom layers.
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for PETGSource material: PET
Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
This project is inspired by “Honeycomb storage wall” project by RostaP, but NOT COMPATIBLE with it. My honeycomb plate has different dimensions and its walls are thicker and more solid. This project is not finished. New components can…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
I made this filament tag which tells you a lot about your filament. Features: The idea for the thin walls test actually came from Mildly_Admirable and his Filament Swatch . There is a key ring hole included but it can also be glued to…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Dremel 3000 table saw. 2 main parts, the base where the Dremel is fixed in by means of a quick tension bracket and the table saw with accessories. In the design I have deliberately opted for an easy-to-stop bracket in which the Dremel is…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
simple model of a dragon skull for decoration. The skull can be placed on the stand or hung. (See pictures). If you don't need the stand, simply leave it out. scale: I have uploaded 2 sample sizes. Only the skull can be scaled smaller…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
Print approx. €16.63–€20.33 excl. taxPreliminary estimate for one variant
Use 0.24mm layer height, 3 walls. A compact miter box designed for cutting small round rods, square strips, beams, dowels, and similar materials. The tool includes saw guide slots for: • 90° • 45° • 30° • 22.5° The 45°, 30°, and 22.5°…
Print approx. €11.28–€13.78 excl. taxPreliminary estimate for one variant
Need a custom adapter for your cyclone separator? Comment the required inlet and outlet dimensions and I’ll make and upload it for you. This 3D-printable cyclone separator efficiently removes dust and debris from your vacuum system —…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
Due to the need to print as many of these as possible, as quickly as possible, this is a version of RC3 that prints faster (and uses less filament). It still retains a measure of comfort because part of the band that sits on the forehead…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge. The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
A complete Easter decoration set — knitted-texture eggs paired with a matching woven basket, both designed from scratch in Blender. The eggs feature a realistic crochet-style knit pattern across the entire surface. The basket uses a…
Hello fellow makers, I assembled the Lego model of the dune ornithopter as soon as it arrived, and realized quickly that it is too big to stand on top of my IKEA Kallax shelf with the landing gear down. Although a beautiful pose, I wanted…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Handy ruler with extras 📏⚡ • Holes for measuring wire & component diameters 🧰 • Connector size templates 🔌 • Basic electrical symbols ⚙ • Centimeter scale for precise measurements 📐 Perfect tool for makers and electricians! 🛠✨
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
[ Update 2: I redesigned the cups to make them stackable. You can find version 2 here . Version 1 will stay online in case anybody wants to keep using them.] [ Update 1: Added a snap lid and cups in two more sizes. See below for details.]…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
Print approx. €4.39–€5.37 excl. taxPreliminary estimate for one variant
Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
***Updated 11-7-2022 | Now Compatible With 15mm & 22mm Tent Poles | *** Added 22mm ID versions of all clamps to add compatibility with grow tents that utilize 22mm OD support poles. If you need a version of these clamps with a different…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
Thanks a lot to @Noname_Engineer for that great GoPro tripod model. I was too lazy to go out to a hardware store and buy thread parts. And I also needed a trippod mount very quickly (stores were closed). Because of that I just added the…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Ich musste meine losen Sechskantschraubenbits organisieren. Deshalb entwickelte ich eine Box zum Sortieren von allen Schrauberbits. Diese Schraubendreher-Bit-Box kann im Deckel 100 kurze Bits aufnehmen. Im hinteren Bereich nochmals 40…
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
A simple and fast print to help clean earbuds and phone charging ports. It features a textured side to help with grip, and the tools on each side are the perfect size for cleaning an earbud or getting dust out of a phone's charging port.…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Summary Do you love Benchys but are frustrated because they don't float in water? Do you want to print your child a cool Benchy for the bathtub? Here is the stable floating Benchy with cargo containers, smoke and flag in a multicolor…
Print approx. €1.66–€2.02 excl. taxPreliminary estimate for PETGSource material: PET
Disclaimer: this is provided as-is to tweak your own profile, use at your own risk. Rename the file to .curaprofile to import. You will need to adjust this depending on your filament. This profile is based on Elgoo Rapid PLA+ and a stock…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Multiple options for storing your Ryobi USB Lithium batteries or Inkzall Large Chisel Tip Jobsite Markers… On your workbench On a wall On a Ryobi Link rail Under a shelf …screw mount to any surface, use with a link rail cleat, or screw…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for PETGSource material: PET
The container lid closes very tightly and locks well in place, due to a tiny thread-like design at the end of the bayonet mechanism. This gives the outside of the container a very smooth appearance without any visible gap, while at the…
Print approx. €0.99–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the Moon Lithophane to 150mm, with a base designed in OpenSCAD to fit an Ikea Stråla lamp cord. There's a hexagon pattern on the base. You'll need a suitable LED lamp, ideally a P45 (45mm pear-shape) bulb or something…
Print approx. €4.21–€5.14 excl. taxPreliminary estimate for one variant
In case you print several filament swatches , you might need a storage solution. This is an improved one, where each swatch has its own slot-in holder which includes a hinge, in order to browse through all the colors/materials quickly.…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.3-0.6mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Print approx. €15.69–€19.17 excl. taxPreliminary estimate for one variant
Vase designed originally for the Flower Bouquet #10280. The added studs fit perfectly to normal lego bricks. The hole on the downside is for put in weight, it is made for 7x M10 Nuts. Settings: 4 Wall Lines 4 Bottom/Top Lines Infill: 20%…
Print approx. €12.05–€14.73 excl. taxPreliminary estimate for one variant
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
I wanted to draw something after the bathtub boat which floats but still looks good on the desk. The idea of an old paddle-wheel steamer was buzzing in my head. You can see what came out of it. It took a few approaches but I am satisfied…
Print approx. €5.17–€6.31 excl. taxPreliminary estimate for one variant
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
No supports needed, print it in 0.20mm in PLA, available in 3 sizes tiny medium big You can scale it to make it bigger (photo shows medium and big) A regular version is available for the box/carton, but you can also print the version with…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
Added stem to help keep tip of tube clear upon cap removal
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
3D-printed wall-mounted holder with a two-part design. The holder consists of a U-shaped base that is attached to the wall and a insertable component with two holes for screws or bolts. The insert pieces are made to slide into the base…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Decided to remix my remix and make the original gravity broom holder but with through-holes for screws vertically aligned to anchor into a wood wall stud (or whatever vertically aligned anchoring medium you want!) Made the countersinks…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
Double Helix AAA Battery Holder - with optional extra compartment This is a fun little print that not only looks neat but holds up your AAA batterys. There are two different versions, one has some extra storage for batterys inside the…
Print approx. €6.95–€8.49 excl. taxPreliminary estimate for one variant
