3,033 models
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Captain Jack Sparrow
Print approx. €19.15–€23.41 excl. taxPreliminary estimate for one variant
Headless Jack by https://aidinsalsabili.com/ This dude has some wicked stuff check it out. If you are using a resin printer The original from the sketchfab site should work with minor adjustments. lots more detail. before the addition of…
Print approx. €28.00–€34.22 excl. taxPreliminary estimate for one variant
Meet the Articulated Jack-O’-Lantern Buddy – a fun Halloween-themed figure with posable legs and cute little arms. Use tree supports with back seam position. ✅ 70 mm tall ✅ Articulated legs for playful posing ✅ Perfect Halloween…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Standing Applejack From My Little Pony TV Serial 11cm height Print instructions Printed from Prusament petg prusa orange 4 perimeters infill 15% brim 7mm supports distance 3mm
Print approx. €10.13–€12.38 excl. taxPreliminary estimate for PETGSource material: PET
Additional Hardware and Assembly Suction cups fit into holes with a bit of pressure and twisting. It takes a bit of elbow grease but they will squeeze in. I bought a generic multipack of suction cup hooks of different sizes for about $5…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
This is a Jack Skellinton cookie cutter. Due to the amount of small detail in the mouth, this is a big cookie! (approx. 3.5 in diameter) Easy to print, (mine was printed in draft mode) Important! The one thig I did notice is that changing…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Jacksonville Jaguars 1st layer White 2nd Gold 3rd Green 4th Black
Hi there With Halloween approaching, you will have to welcome your guests as they should. What better than personalized coasters for that !! I therefore offer you these 16 coasters with Jack’s face and its storage box inspired by the film…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
Michael Jackson. With or without base. + A pose if you would like to pose it yourself with Mixamo. (use MJ3.obj) Whats funny is while I was posing him I was like “This totally looks like he is on stage” Now Im like…"He looks like a drunk…
Print approx. €5.39–€6.59 excl. taxPreliminary estimate for one variant
This table hanger/hook is for everyone who doesn't want to put their bags on ground at bars. This small design comfortably fit in pocket and there is small hole for string to attach it as well. You can see the print file for Průša mini+.…
Plastic cover replacement for the jacking point hole in the side skirt of a Ford Fiesta MK6 ST150/XR4 2004-2008. There is one version for front right (FINIS 1354162) and one for front left (FINIS 1354166). It is not an exact replica but a…
Print approx. €12.07–€14.75 excl. taxPreliminary estimate for one variant
It is best to put supports on the teeth of the jack O' lanterns so they don't get all stringy. There are 6 different spooky faces to choose from, pick a face and start printing!
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This is a 3D scan of the Uncle Jacob statue located at Disney's Haunted Mansion in Orlando Florida. Supports required.
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
Miniature lumberjack for your diorama, architectural miniature or as a figurine. Man | Lumberjack | Architectural figurines | People The lumberjack is wearing work clothes including a cap. It is suitable for 3D models of nature or forest.…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
Jack for 3D Sets Landy 4x4 RC model 1:10 scale
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This one was tricky! I wanted to combine the upcoming holiday with the vase competition and add my twist! This spiral vase includes an integrated handle that can be easily detached to make the vase into something more. Pop the handle into…
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for one variant
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Recommended to print with 4 walls, Color change at 9.2mm…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
You can change the color order, there are 2 types (one with 1 hole for the end of the keychain and another with 2 holes to use in the middle of the keychain) I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my…
This adapts the eyelet drive on my scissor jack (meant to be used with a hooked shaft by hand) over to a ¾" or 19mm socket. My 1.5 ton scissor jack didn't have any method of driving with a drill. I had seen this on other jacks online, so…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
Из-за снега и льда потерялась шапка домкрата. Решил оперативно сделать модель, чтобы поставить ее на место.
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
PinHoist Print your own PinHoist for yourself and friends. Print the left and right Body from PLA or PETG and print 2 of the inserts using your choice of flex material. I used 10% infill on both the body and the insert. I printed both…
Print approx. €5.72–€6.99 excl. taxPreliminary estimate for PETGSource material: PET
Made this and came out pretty awesome especially with a light behind the moon.
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Jack from a Nightmare before Christmas.
Print approx. €4.49–€5.49 excl. taxPreliminary estimate for one variant
Print Jack with supports and install LEDs into the Internal cavity. Place some LEDs up in head and some in body as desired.
Print approx. €33.80–€41.31 excl. taxPreliminary estimate for one variant
A simple jacket hook.
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
This knob is designed to fit my 25-year-old 20-ton bottle jack for my press. The dimensions are different from the Harbor Freight bottle jack knobs, so I had to design my own knob. The shaft diameter is 0.35 inches The pin diameter is…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
This is a remix of the case by Lorenz Nimmervoll. Thanks to him! My changes: adjusted size for ESP32 D1 Mini snap fit case ventilation in cover fixation of the Power Jack simplyfing inside for less supports/material only one hole for cables
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET
Use either coin or highjackig tool for your next shopping ;) Category: Tools
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
My daughter was almost hit by a car last year trick or treating and the only thing that saved her was a pumpkin pale that had a flashlight in it. It was early in the night and as she collected more candy, the pale showed less light, so I…
Print approx. €18.67–€22.82 excl. taxPreliminary estimate for one variant
A simple Ethernet Jack adapter plate for Pass & Seymour / legrand Ethernet Jack.
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
This is a remix of the case by Lorenz Nimmervoll. Thanks to him! My changes: snap fit case ventilation in cover fixation of the Power Jack simplyfing inside for less supports/material only one hole for cables
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
RJ-45 Network Jack Dust Cover Plug Wanted a good one, ended up designing my own. I wanted something that emulates a RJ-45 plug and stays in place. Sample blue parts printed in Polymaker PRO PLA. Tab actual locks parts in place. Tab also…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Simple belt clip for jack 3.5mm cable intended for stage use for wired in ear monitoring. The inspiration for this print was this belt clip from thingiverse .
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Motorcycle jacket sleeve air vent. Credit Remix of Motorcycle Jacket Sleeve Vent / Airflow by @How._. : Added a grate to prevent the nasties from getting in
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
🛠 Materials & Hardware: PLA Combo Black & White -> [ https://amzn.to/4t0FgJ4 ] Bring the Pumpkin King himself to your feet with this awesome Jack Nightmare Charm ! This design, perfectly capturing Jack Skellington's iconic smiling face,…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Forget the friendly pumpkins on your porch. This dapper Jack-o'-Lantern didn’t show up to decorate—he’s here to collect souls. With a sharp suit, a killer scythe, and a pumpkin head full of bad intentions, he’s redefining Halloween…
Print approx. €3.38–€4.14 excl. taxPreliminary estimate for one variant
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Jack COMPASS does not have an integrated handle holder or any place to store the handle. This simple holder will help. It is mounted by double-sided…
Well, it is not a really a "Remix" as I had this modeled long time ago and decided to post it as alternate design of Plug Cover for 12V 2.1x5.5mm with screw terminal by hdiessner - Thingiverse
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
I recommend slicing the file yourself with your own printer settings, but it for some reason wouldn't let me proceed without a gcode. This adapter slots into the factory “jack receiver” slots located under the frame rails next to all 4…
Print approx. €6.95–€8.49 excl. taxPreliminary estimate for one variant
1.Necessity. Incompatibility due to size of TRS straight jacks that protrude too much for the required application. From a size of 50mm to 20mm. 2. Solution. Manufacture with MDF printer (Fused Deposition Modeling) an angled housing where…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
8040 extrusion cockpit mount for SimJack Control box. You can print just 1 but 2 work better.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Raspberry Pi's are notoriously finicky with their WiFi connection. It's much better to use hardwired networking, if possible. Print instructions Raspberry Pi's are notoriously finicky with their WiFi connection. It's much better to use…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
I used black and white Overture PLA Start with black and swap to white at layer 6
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
A fun garden stake with a spooky Halloween pumpkin. Play with the Z to your liking. I like to have it thick to give more substance to the look. Change filament for a color change and a spooky effect to the face. Glow in the dark filament…
Jack Black Steve : Minecraft Movie
Print approx. €3.71–€4.54 excl. taxPreliminary estimate for one variant
Union Jack as MMU coaster Diameter 90mm Height 2mm
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
OmniBox Side Plate with 4 Keystone Jacks Omnibox Project.
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant
My take on the classic Jack-and-the-Beanstalk fairytale. The beanstalk is generated using the organic support function in PrusaSlicer. It’s a two-part print (beanstalk/cloud combo then castle separately) that requires a bit of glue to fix…
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for one variant
3D print your very own 'Happy Jack' coaster for festive and spooky drinks this Halloween!
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 3. No supports are needed. Print-in-place.
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
JackJack From the Incredibles
Print approx. €8.82–€10.78 excl. taxPreliminary estimate for one variant
i Think this is from the user Chrismettal - Binary-6 , but he has not posted it on printables so i reposted it from the website. I was searching for it long time so i published it here. I work on the university and it's perfect form my…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Don't you have anywhere to hang your jacket at your workplace? The jacket holder helps you to hang up your jacket easily. I printed with on my Ender 3 Pro with PLA (25% infill). The printing time was approx. 1 h 20 min. The gap is 20 mm .…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
I designed this baby toy, which my 5-month-old daughter loves. With a total of 10 filament changes on the front part, it can be printed without an MMU or other material change system. The back part, as well as the limbs, are just a single…
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
Must be printed with PETG (or stronger material), with 100% infill for stability. PETG print must withstand compression pressure 10 MPa (i.e. 1kg/mm2; the pressure area must be at least 1500mm2 - so make sure your jack stand fits…
Print approx. €9.41–€11.50 excl. taxPreliminary estimate for PETGSource material: PET
My 25 Chip holder - https://www.printables.com/model/1422966-chip-holder Chip Tower holder for 15 chips - https://www.printables.com/model/1423032-chip-tower-holder Recommend printing as many chips, as many are in the gcodes, but it's on…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Top mount for the Sim Jack Sequential Shifter
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for one variant
Use tree supports on build plate only. The Evil Jack-o'-Lantern is a 100 mm tall Halloween decoration featuring an aggressive carved face with slanted eyes and a sharp, jagged grin. Its deeply textured surface and exaggerated facial…
Print approx. €6.12–€7.48 excl. taxPreliminary estimate for one variant
A quick Jack Skellington inspired Halloween trick or treat bucket. The design comes in three variations, with two handle designs. It can be used as a bucket, or a hanging lantern! Bucket Options Single Color Thin Wall (~170 g) - Excellent…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
Didn't find a proper adapter for this bottle so I made this one.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Maqueta de proyecto de vivienda unifamiliar. Hay varios ficheros de impresión y el modelo en CAD
Mount to stabilize the galvo-style LaserPecker 1 on a drill press Jacob's chuck. Easier to manage focal distance and avoid bumping the lightweight tripod it ships with. Optional “flex pad” model can be printed in TPU or another material…
Print approx. €2.12–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
I kept damaging my Ethernet cable by bumping it with a nearby storage basket, so I wanted to find a wall plate that would recess the jack out of the way. None of the ones I found nearby fit Decora style wall plates, so I designed my own.…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Heart Button
Jack Strange CutiKing may be small, but he’s a fearless Viking ready to guard your desk! Axe in hand, shield raised, he fights off clutter and boredom while bringing a spark of Norse adventure to your day. Step into the world of Jack…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for one variant
Puffer Jacket Catchall Bowl is a playful yet functional storage bowl inspired by the soft, quilted structure of a winter puffer jacket. The inflated, stitched look contrasts with its solid form, turning an everyday organizer into a bold…
Print approx. €5.85–€7.15 excl. taxPreliminary estimate for one variant
This is Samuel L Jacksons arm from the original 1993 Jurassic Park movie directed by Steven Spielberg. I have created the majority of these models. One of the models was created by danowall with the Hand Coat Hanger. (New Photos soon!) I…
Print approx. €3.53–€4.32 excl. taxPreliminary estimate for one variant
Stopper for shoe cabinet Measures: Inner width 8 mm Inner height 11 mm Outer width 10 mm Outer height 16 mm Total height 27 mm Printed with PLA+, without supports, 235º nozzle, 65º bed, 200mm/s speed. Fijación tope para zapatero Medidas:…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Create your own spooky pumpkin patch with this jolly jack-o-lantern! Black PETG remains fully opaque with just two layers (at .2 thickness) Scale to any size and tape/glue to any surface for an instant Halloween accentuation
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
I have designed this jacket hook to be used on my custom wooden wardrobe storage. I wanted to achieve a sleek design and took inspiration from arrow heads. The hanger stays open at about 45° and holds quite some weight. My 5kg leather…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Adapter um auf dem Wagenheber auch die Planger(R) Adapter sicher nutzen zu können.
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
I got the idea from https://www.thingiverse.com/thing:3726158 . It didn't fit my jack pads so I made a similar design using OpenSCAD. PETG or ABS is recommended since the print needs to be heat resistant. Jack Pads: I purchased from Ebay…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
We wanted a spooky, scary pumpkin earring set to show off our glow in the dark filament. These earrings utilize a filament change to create a multi-color print and a glowing effect. We used actual glow-in-the-dark filament on our favorite…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Print this using supports touching the buildplate, with 0.15 mm lines, with either PLA or PETG, and use a 0.2 mm nozzle.
This model holds six 8 mm banana jacks. The bottom cover pops in, or can be held in place with an m4 socket head cap screw. Recommended Print Settings Print Orientation: Default as modeled Material: PLA Layer Height: 0.20 mm or less…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
Simple print and can easily be scaled up or down. Printed with no supports and 15% infill.
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Print approx. €41.83–€51.12 excl. taxPreliminary estimate for one variant
Ce modèle de bouton ovale est spécialement conçu pour s'adapter à un jacuzzi. Avec une largeur de 110mm et une longueur de 70mm, il offre une prise en main confortable et esthétique. Le bouton est destiné à être inséré dans un trou de…
A four-leaf clover patterned clip for a live flower on the lapel (pocket) of a jacket to keep it in place even when you move more violently and keep it fresher for longer. The flower is placed in the inner container and the remaining…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Jacuzzi para mascotas escalabe
Print approx. €4.92–€6.02 excl. taxPreliminary estimate for one variant
Audio Jack deskholder
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Yard sign for Halloween featuring a florescence Jack O" Lantern Check out my other Models at: Halloween Fun Collection by Ray Fox | Printables.com
A halloween themed bookmark, made from those gian staples paperclips: Staples Giant Paper Clips - Gold - 10 Pack | staples.ca (These would also work: Giant Paper Clips, 40 Pcs 4 Inches Large Paper Clips -Timenu 100mm Jumbo Smooth Metal…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This model is a functional miniature of a pumpjack, often referred to as a “nodding donkey”, commonly used in oil extraction. The design focuses on clearly demonstrating the mechanical principle behind the system: converting rotational…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
to put on hoode draw strings
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Made this by free-handing some splines in OnShape after my heavy a$$ jacket started pulling my old coat hanger out of the wall. Printed a test-quality piece first so I could make sure it would fit (file attached,) then beefed it up with…
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for PETGSource material: PET
Schluß mit Platzproblemen für Sammler von Jack Daniels. Hier können 2 Flaschen Platzsparend gestellt werden. Weitere Modelle für Packkarton (Online), Blechdosen und Dosen wird noch folgen.
Print approx. €10.50–€12.84 excl. taxPreliminary estimate for one variant
This is for an old Jacuzzi pool sand filter diverter valve model 24LT3 from the mid 1970s. I don't expect much downloads but I hope it helps someone save their functional filter for another decade since parts are no longer available. The…
Print approx. €11.29–€13.80 excl. taxPreliminary estimate for PETGSource material: PET
Do you, like me have the problem where when flying, Airplane adapters break due to you standing up or sitting down? I bought some cheap adapters and dismantled them to see if I could make it even smaller and lower profile and this is the…
Just something to help keep the books from getting too beat up as you read through the stormlight archive
Print approx. €6.08–€7.43 excl. taxPreliminary estimate for one variant
Nur für Flaschen im Karton für Jack Daniels zum besseren Stellen. Jeweils für 1 Modell oder gleich 2 Modelle auf dem Druckbett
Print approx. €5.70–€6.96 excl. taxPreliminary estimate for one variant
Info k tisku: Výplň 100%, kvalita 0,10 mm FAST DETAIL. Při tisku z PLA bez límce, při tisku z PETG nutný límec.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Wall decoration of Captain Jack Sparrow.
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
This is a functional hands-free solution for hikers and students. This specially designed clip attaches to your backpack strap or handle, allowing you to securely hang your jacket or sweatshirt when you're on the move. No more stuffing…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Matches dimensions of ‘George Home Brownie Tin ( 6131085 )’. Printing parameters Heat-resistant material needed: ASA/ABS, PETG, or better Usage Layer of tin foil would be a good idea, especially if your material of choice isn't food-safe…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Spooky season is coming so I decided to make some Halloween Pumpkins. This is the fourth one I decided to put on printables, but there will be more in the near future. This pumpkin is designed to be used with leaf( for extra cuteness) but…
Universal GPU support jack for PC cases, the total height can be adjusted between 80mm and 130mm. Update 28/09/2021 - Added a longer screw option, taking the total height up to 220mm. Print the base in the orientation provided, with no…
Bring a bit of winter “street style” to your desk with this white puffer-jacket (Montclair-style) pen holder . The padded sleeves, front seam details, and chunky “pockets” make it a fun, modern desk accessory that still looks clean and…
Bring warmth and personality to your desk with this adorable Puffer Jacket Pencil Holder ! Inspired by cozy winter fashion, this fun and stylish organizer is perfect for storing your pens, pencils, brushes, or small tools while adding a…
![Bug-Safe Motorcycle Jacket Sleeve Vent [remix]](https://media.printables.com/media/prints/f48751c7-c449-44f4-a8f3-4c296a71622f/images/10361833_e9a228e4-bdac-4492-ba9f-cabea344718d_985ed9e5-4ef1-4cb1-a410-919d5915effa/a82639cc-90ea-4e8b-b47f-7488e6d98434.png)
![[REMIX] Jack in the Box (pun intended)](https://media.printables.com/media/prints/601753/images/4788605_34ec028a-958b-49d0-a966-70ab6fb0792a_dd4d79eb-be1a-4bb5-8b5f-c55a3ccb8ee1/img-1-banner.jpg)
