Counting matching models…
Replacement battery cover for the TCL Roku RC-AL5 remote control. This model appears to be dimensionally accurate but is a very difficult print. It requires supports at any orientation. If you have a successful print and fit, please let…
Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…
This is an Mount for a GoPro Hero 8/9 suited for the Iflight XL5 Frame like the Nazgul 5 and the XL7, DC5/7. I printed it without support with a resolution of 0,2mm. You might need to drill the holes for the mounting screws to a bigger…
Tried to make this as true to the original as possible. This fits a Nazgul5 v2 perfectly. Print with no supports in the original orientation I have provided. For a full set, print two of the left and two of the right. I highly suggest…
it is a add-on upgrade for Steamdeck back buttons (extruded 4mm) it enhance the feeling press from the back but not from the side. it should be fit in the official Steamdeck carrying case. - Use double tape to tape it on L4 & L5 buttons -…
Civic Type R (FL5) Fender Vent Guards The FL5 iteration of the Civic Type R introduced open vents to the front fenders. However, these vents are large enough to allow road debris to pass through, potentially damaging the side panels.…
nazgul xl5 mount crossfire buzzer gps PS. Mogę wydrukować i wysłać na terenie Polski.
Tested on my HSKRC XL Frame (XL9 Arms), which is very close to the iFlight XL7. Standoffs in my case are 5mm (which could differ from the iFlight model), so the holes are tailored to that size. I added a TBS crossfire antenna holder to…
Update : After using this in the 40C weather and putting in a few thousand km this summer, I made a few changes, to increase the strength of the main piece. Mine never broke, but I like this update a bit more. 7/10/2023 This model/remix…
I designed this adapter since I wasn't satisfied with the online available ones. I am using a Nazgul5 V2 with its XL5 V5 frame and an ExpressLRS 2.4GHz T-Antenna by HappyModel. To get the antenna into the printed part you might have to…
Based on the feedback of the feedback received on my previous design this is slightly more bulky for strength, I have reduced the length and optionally incorporated space for a “hidden” Apple AirTag. Takes 2x m3x5x4 heat insert. Takes 2x…
Address change ;) https://learn.adafruit.com/adafruit-vl53l1x?view=all # SPDX-FileCopyrightText: 2022 wrdaigle for Adafruit Industries # SPDX-FileCopyrightText: 2022 Kattni Rembor for Adafruit Industries # # SPDX-License-Identifier: MIT…
This is a custom D style seat post (Orbea Orca 2024) mount for the Garmin Varia RTL515. I Printed it using Prusament PC-CF and Ninjatek Cheetah TPU on my Prusa XL Dual Head. I designed the mount this way so there is a TPU barrier between…
two types of antenna mounts ExpressLRS
Set of parts I created to replace the original TPU parts for the 5" iFlight Cidora SL5 V2.1. To print the right hand arm guard, just mirror the left hand one in the slicer.
A replacement Go Pro Mount base for the **new** NAZGUL XL5 ECO frame. Reinforced around the bolt where it could split! The new frame used on the nazgul eco is still called the XL5 but does not fit the old go pro mounts, meaning you have…
Garmin Varia RTL 515 holder for the D-Shape seatpost of the 2024 BMC Roadmachine Design inspired by Varia RTL515 D Seat Post Mount from @DaveK , but i created it myself from scratch in Solidworks. Printed in PETG, 0.15 STRUCTURAL with 4…
Designed with the LG 27UL550 monitor and the iPhone 14 Pro or iPhone 15 Pro Max dimensions in mind. I print this on its side (the longest side on the Z axis) so that it doesn't require supports.
Drew up a new powder measure knob for adjusting the powder charge for a Dillon RL550B reloading press. Uses an M3 screw to secure it against the flat part of the bolt head. Recommend printing using PLA with 0.08mm layer height to get the…
I remixed this to have a flat bottom. Means it won't wobble off the side table when I press buttons. Follow print advice here: https://www.printables.com/en/model/146820-tcl-roku-tv-rc-al5-remote-battery-cover
As I didn't found an enclosure that checked all the boxes, I've designed it myself. It's a an enclosure with a print in place hinge and embedded magnets. Has the space for the soldered wires that are going to stick through the back. The…
This can be used to mount the standard stepper motor drivers on standard DIN Rail. I fixed the issue of having to tap holes in similar DIN rail mounts by adding space to embed hex nuts. Works for the following STEPPERONLINE Models: DM542…
Standoff spacing is 21mm. Standoff height is 28mm if your frame is not the nazgul and you want to match it. This mount was meant to reduce vibrations caused by the antenna, so I printed mine with PETG. It is very stiff and doesn't flex,…
A surround for the Speedometer/display unit. Note: This surround / binnacle. / cowl is designed with button cut outs and from measurement of the two button digital display as fitted from model year 2020 onwards (led headlight models)…
Print orientation ~45deg as shown in image. There are multiple version with 2 variables wall (H)height and (R)diameter show as red lines in image. Default is H=5.2mm. Diameter 3.2mm for PLA and 2.8mm for TPU print Most vanilla TPU print…
PegLock system by Sy's. This is a remix to hold the Zicron L50 stud finder. This is a nice fit with a slight squeeze at the bottom to hold the tool in place. https://www.zircon.com/tools/studsensor-l50/ Print Detials: VoxelPLA .25 mm…
This is a dual antenna mount for the Walksnail Avatar HD system with two antennas. There's a version without support and a version with longer antenna sleeves which require support. Have fun! Print Settings Printer: Self built Rafts: No…
Two types of camera handles allow you to place the camera on your waist or head to maintain stability! Olympus E-PL5 gripper Added a second version for a more aesthetically pleasing appearance 两种类型的相机手柄，可让您将相机放在腰部或头顶，保持稳定性！奥林巴斯E-PL5夹持器…
This is a rear mount for both a BN220 GPS unit & a TBS crossfire immortal antenna to fit the iFlight XL5V5 frame (Drones such as the Nazgul5). Unlike others out there, this doesn't replace any of the existing parts. The rear frame bars…
This is a remix. Changed it so that it fits in front of the Nazgul V4 and V5. Fits every other 6mm standoff. Dimensions from hole to hole are 24.5mm. It also fits in the back if you squished the arms together. I found out after printing…
Barrett cal .50 rifle muzzle brake for L96 WELL MB01 airsoft guns. I recommend printing from PETG. The thread is P M24X1.5 This is only an imitation for an airsoft gun
A simple lens hood made for the Sony 55-210mm F4.5-6.3 lens. Begone lens flare! For the print I used a 0.4mm nozzle, 0.2mm layer height. I have added supports at the bottom for the bayonet mount and also a brim because this is a…
I needed an antenna and GPS mount for the AOS UL5, and thought I'd share it. This is for the O3 Antenna and the Matek M10-5883 GPS. Printed in TPU w/ 50% infill it came out under 5g This is a work in process, feedback is always welcome.
A version of the tail light mix specifically for my L508. I printed it in ABS, it needs support and it works great!
Description If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Case for ElectroCookie Mini PCB Prototype Board . This housing is designed to accommodate a VL53L0X Time-of-Flight (TOF)…
I purchased a new Radiomaster RP3 elrs rx with diversity antenna. So designed this. So one antenna will be at back and horizontal and another also at back but vertical but with a 30deg angle. I tested and am getting very good coverage…
Rejilla versionada, compatible con Dometic L500, para salida del calor de la nevera de las caravana y autocaravana. IMPRESIÓN: Material PETG Tres perímetros en la pared. Soporte para zona de enganche de la rejilla, realizado con material…
This is chassis for VL53L0X Time of Flight distance sensor for my INAV 6.1 based F450 type drone to use as range finder. Use M4 nut and screw DIN 912 type (imbus) to connect dist_bdy4_top with dist_bdy3_top. Parts dist_bdy1_bottom,…
This is a roughly 6mm shack or hovel that can be terrain for games from modern to sci-fi. This should be fine at 10mm scale, but will look clunky much larger than that. This should work fine for games such as Epic Armageddon or Battletech…
A tripod ring for your Sony 55-210mm SEL55210 (kit telephoto) lens! After struggling to find a aftermarked lens ring I decided to design my own for this kit lens. I plan on making different aesthetic versions and keep the thickness/safety…
Quick and dirty vtx mount for the awkward and hard to mount Max solo VTX. Update April 2024: Added a version that connects the two and adds A holder for a radiomaster RP1 ELRS receiver Print in TPU 100% infill with no supports
Durable contacts protector cap for Leica M10 camera BP-SCL5 battery. Helps to prevent short circuit and keeps battery contacts clean. Two caps can be used on both of BP-SCL5 battery ends for extra protection from dropping damage. Print…
Easily mount the Garmin Varia RTL510 radar on the back of your bike! This adapter is mounted on the rear metal plate of the bicycle, where the red rear light is usually mounted. You only need to add a Headset Top Cap Mount for Garmin like…
og link: https://iflightrc.freshdesk.com/support/solutions/articles/48001238224-nazgul5-v3
Dual cage for Motorola XTL5000. This has all the rear cutouts and both units slide in with ease and has a secure fit.
Don't land on your motor bolts! For some reason the Roma L5, as great as it is, doesn't come with any bottom landing solution other than erasing your motor bolts . I designed form-fitting bolt-on landing feet that are also arm protection.…
RYOBI has been adding new tools to their USB Lithium line-up. Last year I created a Lantern and USB Charger/LED light that used the USB batteries. RYOBI added two new USB LED lights. A flip light (FVL52) and a small flashlight (FVL51). I…
I'm posting it here in the odd chance it may this may be useful for somebody else… Printing instructions Printed in PETG with the default 0.2mm layer height settings. Two minor twists related to the two “hooks” on either side: They need…
Extended base plate for Lancer L5awm Magazines. This does not increase magazine capacity. Use an M4 Set screw or 22mm bolt to secure to magazine. Holes are big enough to fit paracord through.
This is a floorplate for the Lancer L5 AWM series of magazines. It was designed to securely attach a mini-glowstick for easy retrieval when playing at night. Mini glowsticks: https://www.amazon.com/dp/B00XB2V7XI?psc=1 These glow…
The Vl53l0x is what's known as a time of flight sensor. This sensor can measure a distance using a laser! However these sensor are well.. sensitive and can detect a transparent visor pretty easily. As it is usually not possible to place…
HTML5 logo keychain. Check out my other keychains ! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28mm Infill: 10% Notes: Set wall line count to 2 to avoid unfilled spaces in thin parts of…
can be print without support i used tpu you need a zip tie
This is an antenna mount for Iflight XL5 frame for walksnail V2 vtx stock antenna
An avid biker friend of mine owns a Garmin Varia RTL515. He was having issues with debris damaging the device and asked if I could come up with something to protect the device. I made a cover/sleeve to prevent debris from entering the…
English below: Es handelt sich hier um den Hebelarm für den Bruder Liebherr L574 Radlader. Ich hatte einen Infill von 40% verwendet und dies hielt wunderbar mit PLA+ von PM Filament. Ohne Stützstruktur könnte es schwierig werden. This is…
The Bose Companion 2 Series II are a great magnetically shielded speaker that can be had at a low price, making them a perfect companion for your PVM-14L5 monitor. Bob at RetroRGB has great information on the subject. These stands allow…
just a small remix of the original file provided by iflight, just made the walls a bit wider.
If you want to use the cheap VL53L0X breakout board with your Gaggiuino as a water level sensor, here is an enclosure for it. Parts needed 2 disc magnets, 5 mm dia. x 2 mm ht. (same as for Scales Mod)…
a small boxs that hold ESP32 with Time Of Flight sensor, with multi state buttons
I didn't like the look of the elastic band mount that came with my Garmin Varia RTL515 radar so I designed one that looks better (imo) and mounts the radar more securely. This may also work for other radar units or anything that uses a…
I upgraded my VTX on my Nazgul5 and the cable for the antenna was a few mm too short. So I designed a shorter mount for the antenna. I relocated the R/C antennas, too. Have fun. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts:…
I got tired of my headset hanging off the side of my computer monitor when I wasn't using it. It would also block a portion of the screen. There isn't another good place to hang the headset so I made this model as a way to hang the…
DJI Osmo Action mount for iFlight XL5 v4 . 4 different models: 10° 25° (with and without hole) 35° I don't know if this fits the older models. Let me know if it fits! Print Settings Printer Brand: Creality Printer: Ender 3 Filament:…
This is an electronics housing for the iFlight Nazgul5 v3. It helps protecting the electronics and provides a cleaner look. Also it feels better when grabbing the drone by hand and gives a more polished overall experience. The holes are…
Mount for the Zircon StudSensor L50 compatible with IKEA Skadis pegboards. Would like to do a v2 with rounded lower corners, but this is functional.
A custom 3D-printable connector that lets you mount your Decathlon SL510 clip-on bike light directly to your seat post. Designed for a standard 31.6 mm seat post, angled at approximately 75° , this adapter provides a secure fit (see note)…
Thus is Hood Release Latch for Mercedes CL500 W215. This is very hard to find online for purchase, so I modelled it. Better print it using PETG to handle better outdoor temp or even ABS. I test printed it using PLA and PETG but not ABS.
These side panels encapsulate the stack in the middle and the rear end where the VTX ist installed in the bind'n'fly Nazgul XL5 Eco without removing any preinstalled components (besides the top plate to access the central standoffs). The…
Simple Sidemount for the IFlight SL5 V2.1 Frame, all Revisions as of Upload Date. Can be used on any Frame with 20mm Standoffs. I recommend routing the Power Cables infront of the Standoff so it gets pulled inwards by the power cables.…
This adapter was created to mount the XT60 connector at 90° instead of 45°. My batteries (SMC HCL RS and Tattu v6 ST) have very short cables and would just barely reach to the connector. I included a small pocket for the balance plug. It…
So you got yourself a Prusa XL with five printheads. Now what? There's not all that many things to print which are both big and multimaterial. This collapsing sword is designed to require all five printheads, and it just barely fits on…
I converted my little E-PM2 to full spectrum and needed a way to hold the filters between the lens and sensor. The only already made solution I could find was for the newer rounder mount of Olympus cameras. So I took the opportunity to…
Print in the orientation shown in the slicer pic with tree supports. The softer the tpu the better since you will have a better time to fit gps in, as it's a tight squeeze Fits the HSKRC XL frames, as well as any frame that has a rear…
Do also check out my new AOS LR5 O3 parts page too! Don't land on your motor bolts! Don't go erasing your motor bolts ! Print these minimal landing feet / arm protection. Go long range: go GPS! Sandwiched-in super easily between the…
I love the SL5 frame and this a nice way to fit the airunit into the small frame. I remixed the design a butchered a nother antennamount and crossfire aswell. Category: 3D Printing
I wanted to mount my bike lamps to the thin bar of my bike rack, which I wasn't able to do with the original mounts. I uploaded two versions: rounded back with holes for zip-ties flat back without the zip-tie holes (for easier…
Headphone holder for a Jabra headset for my Lenovo L580 laptop. The holder is attached to the right-hand corner of the laptop. Printed with a Prusa Mini+. Support should be activated.
This is a remix. Changed the antenna placement for the Happymodel ELRS T-style antenna because the antenna comes really close to the props and chances are high that the props will suck the antenna in. I also removed some stuff that are…
Magene L508 Halter für die Satteltaschen Ich nutze sie selber an meiner Ortlieb Seat-Pack QR und Rovativ
This is a walksnail Avatar V2 Antenna mount for iFlight Titan XL5 frame. The original model seem to have an error, the mounting holes are too close to each other, it should be ~25mm. This was fixed here, by scaling up the original model…
Simple clamp mount for a Garmin Varia RTL515 quarter turn, using the original insert that comes with the light, a few M3 screws and some heat inserts. Has a 10 degree rake on the stay to suit the rear tube on a Topeak Super Tourist, as i…
Skid Guards / Armguards / Bumpers. Scanned from the Stock Guards for the IFlight SL5 V2.1 Frame. Cleaned up and Remodelled from Scratch. Can be printed either upside down with supports or at a 45° Angle without supports Print Settings…
It is endpiece for Nazgul5 V2 with XT60 plug. It will allow you to plug your battery directly to your drone without worrying about props cutting your cable. Use some form of TPU that is little bit more stiff and rigid. Other materials can…
Description: A replacement for the Sony PVM-14L5 fragile factory D board mounting bracket. FDM_0165 is a remix significantly changes the geometry for better durability and printability. This is a two piece print and requires adhesion post…
Just simple clan symbols from L5R. Category: Games
This a remix of https://www.thingiverse.com/thing:5443913 The only change is that the mount is rotated by 90º since the Magene one is like the Garmin Varia but reversed. The ring border has a glitch on one side but doesn't affect the…
Sized to fit Honda SCL500 but should fit other bikes that use same rear brake fluid reservoir. Support material required for the window. Doesn't use much and this should be a quick print. I don't think you need consider ASA. You can use…
I recently bought Lenovo L580 which is (like all nowadays laptops excluding GETAC) powered by mechanically weak USB-something port that would break if you even look at it from wrong angle. Solution is easy and strong enough. Add a frame…
A pin based on the Gerry Anderson TV series Fireball XL5
UPDATE: I added honor tokens to represent 1 honor and 5 honor amounts. I found the Kanji for "honor" and for "five honor." If anyone is fluent in Japanese and would like to confirm or correct the symbols I used, that would be appreciated.…
This is remix of two model https://www.printables.com/model/857615-garmin-varia-bontrager-blendr-saddle-mount and https://www.printables.com/model/439489-magene-light-l508-saddle-bag-mount Magene mount 90 deg rotated and do'nt work…
FPV Thrid person view mount for Insta360 GO2. Design is intended to bolt below the drone frame. Length between spacer is (25mm on the XL5 Titan Frame). Comment below if you want differents screw spacing for your specific frame) Hardware…
Frame arm for Nazgul5 drone, temporary replacement
IFlight XL5 BN-880 GPS holder An absolutely minimal mount that wraps around the GPS pcb and is being held by the two rear bolts. Print at 0.2 layers, 0.4 nozzle using PETG or TPU96+. After printing open the arms of the support and insert…
I made this small mast after finding that hard-mounting my GPS to the frame using this design ( https://www.thingiverse.com/thing:4057458 ) put it too close to the EMF of the controller/motors and threw off compass readings so iNav…
Skids to protect carbon arms from scratching and grinding, also looks cool :D Print with any material. Set many outside perimeters and high infill to make them more grind resistant.
iflight GPS and Finder Mount ( Backpack-Sandwitch) for Diatone L5 Longrange ... may also fit F4 and LR4 but not testet. also TBS M8Q GPS should fit Category: 3D Printing
