Counting matching models…
Custom magazine extension for magazine GL9 magpul Glock 17 + 2 extra ammo. The product is made in such a way that no screws need to be used.
Why My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping. Features Pre-modeled threads. The thread pitch on…
It's a replacement knob. You can optionally remove and use the metal knob-ring from the old knob (see pictures). Should fit nicely with a well calibrated printer. If you find it's a little loose (or tight), adjust your print extrusion…
Working bolt action and removable mag. Works with Lego figures and other minifigure hands like mega construx. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 50 Filament: PolyMaker…
Free my models 94430a8ebd924bf5
Tested on my HSKRC XL Frame (XL9 Arms), which is very close to the iFlight XL7. Standoffs in my case are 5mm (which could differ from the iFlight model), so the holes are tailored to that size. I added a TBS crossfire antenna holder to…
PMAG GL9 extension. Fits Magpul PMAG. Adds four 9mm rounds to stock mag, with stock internals. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Infill: 35% Filament: Overture PETG Black Category: Sport &…
Hello there, As i really liked my SRS i have tried my luck with Gas Sniper, a classic, WELL G96 (ARES AW338 Compatible) which have some non-standard solutions for todays airsoft standards. First model which i have designed is simple 14ccw…
The Minisforum MS-A1 is an awesome low power motherboard case combo, but the cooler is weak and kind of noisy. The cooler mount is almost but not quite AM-5 cooler compatible. I made a mount to adapt the NH-L9a to the slightly smaller…
Handgriff für eine Astschere L99 Fiskars, Ersatzteil für den Handgriff Handle for a L99 Fiskars loppers, spare part for the handle
This is a remix of https://www.thingiverse.com/thing:4057643 ( original reddit post ) I remade it with OpenSCAD to allow customization, by modifying only a couple variables. It will generate a STL with dust filter side laying down for…
The fan duct carrier frame is designed to enable the use of the NA-FD1 fan duct kit on the NH-L9x65 model CPU coolers, when used in Small Form Factor (SFF) environments where there is a gap of 5mm or more (up to 45mm) between the cooler…
this are mummy mags for in GGB airsoft pistols. in case you like to practice some dry fire skills like reloads, drawing, presenting, and actually dry firing. with out a risk of making a lot of noise, or excellently firing a BB. the Pmag…
this baseplate is modeled to look like a Pmag GL9 base plate. this is not 100% the same but it give it the look and feel of one. so you can turn your WE TECH G series mags the G19,G17 and so on. into a “Pmag GL9” just like with the…
A simple holder to house a low cost circular hygrometer module in the front corner of an air tight cereal storage box to keep 3D printing filament clean, tidy and dry. The HPL951 storage box is my go to container for storing 1Kg reels of…
Barrett cal .50 rifle muzzle brake for L96 WELL MB01 airsoft guns. I recommend printing from PETG. The thread is P M24X1.5 This is only an imitation for an airsoft gun
My Dometic RML9330 Fridge Door Lock internal connector has broken and the little return spring. The spare part was found for £113.99, I thought I had to try build a replacement part myself. Parts need to be cut in the half for printing. I…
GoPro mount for Decathlon Forclaz HL900 (suits other forclaz headlights too) headlight. Best fit together with Rockrider GoPro mount on helmet ;) https://www.thingiverse.com/thing:5443026 Due to mechanical properties, print it separated…
Keychain inspired by the renowned L96A1 precision rifle
The title, but smaller. It's a Ruger RXM Mag Sleeve for a 17rd GL-9 Magpul mag OG model by FeedingBirds4Evah
I added the option of mounting a screw.
Dobré ráno, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás TDC pro sniper Airsoft pusky s vnější hlavní 30mm průměr. Funguje naprosto skvele a montaž je jednoduchá. Je potřeba si zistit, zda mate hop up s možností montáže…
Why My Well MB01 came with a 26mm CW threaded outer barrel and, while I have already made an adapter to 14mm CCW, I have to admit "native" flash hiders just look better. So here's a flash hider that screws directly into the outer barrel.…
This is a fan shroud to help the CPU fan suck in cold air from the outside, through the side panels. It should just fit through pressure, no mounting hardware or tape needed. I made it for the "Kolink Rocket" mini-ITX pc case with the…
The Minisforum MS-A1 is an awesome low power motherboard case combo, but the cooler is weak and kind of noisy. The cooler mount is almost but not quite AM-5 cooler compatible. This design adapts the NH-L9a to the slightly smaller mounting…
CPU cooler fan duct that forces it to draw cool external air. Created for the DeskMini h470 and Noctua NH-L9i.
Set your case spine to 5.5 so the fan sits right against the side panel.
This is a slightly modified remix of the original found on thingiverse, the thread on that one was very large so it could not enter the barrel. I reduced the scale to around 80%, cut some of the outside thread as it was also too long and…
🖥 A mounting bracket to attach the Noctua NH-L9i CPU cooler to an AMD AM5 socket. ℹ Noctua provide free upgrade kits for coolers with older mounting hardware! So go and order one. But if you're in a pinch, you can use this instead. 🔩…
https://www.reddit.com/r/sffpc/comments/lqqu50/diy_avoduct_for_l9a_in_dan_a4sfx/
This is quick and simple model I whipped up to test and see if TPU would survive with fuel. This part is equivalent to Honda Part number 17631-329-003 and works with multiple vintage Honda fuel tanks. May fit others! The dimensions are…
silencer from AWP rifle for L96 MB01 I recommend printing from PETG. The thread is P M24X1.5 This is only an imitation for an airsoft gun
It's good to have some T-nuts on hand instead of waiting for an order from China that never arrives
Made to be put on top of the larger NH-L9x65 coolers, comes in 5mm and 10mm sizes but its recommended to measure the distance of the panel to the fan and resize accordingly
After purchasing a RIA/Alfa Proj. AL9.0 9mm revolver, I needed a way to easily reload without having to spend a fortune in moon clips. After checking the forums to see if folks had printed moon clips and finding minimal success in…
A simple Fan Duct for Asrock Deskmini X600 with Noctua NH-L9a-AM5
Sturdy case for the BL9000 pro, printed out of TPU. I use this case with the Armor-X mounting system on multiple bikes which works great! Don't forget to post a make and tell me what you think!
Heat insert press nutbar and holder arm for LML9B
Bipod + RIS adaptér pro pušky airsoft L96
I created this setup gauge so I could reset the final crimp die on my Dillon Precision SL900 shotshell reloader back to factory settings. Taking measurements on the tool head is very difficult. This gauge makes it easy to set the die body…
CubeFrame_6x6x6_K3_L9 - Peng Song A size 6 cubic puzzle of 3 pieces, rated at level 9 (moves to remove first piece). https://sutd-cgl.github.io/supp/Publication/projects/2022-SIGGRAPH-High-LevelPuzzle/index.html ACM Trans. Graph., Vol.…
This piece spaces the rudder further back so that you can fit a larger prop on the WLtoys 916 RC Boat. You will need to cut a longer piece of wire for the steering, but other than that, it uses all existing hardware. We didn't have to,…
An alternative holder for the z axis rod and rod Print instructions Category: 3D Printer Accessories Print Settings Printer: Mendel90 Rafts: No Supports: No Resolution: 0.2mm Infill: 20%
Originally published here: Alcatel 1X 5059A & TCL L9 case by tato_713 - Thingiverse This was originally designed for the smartphone of the Chinese brand TCL, model L9. Some time after that, I discovered that it is the same phone as the…
Designed specifically to pair a Kryptonite 002130 lock with an Inmotion S1 scooter. May fit other locks if the shackle diameters are the same. This is my first original 3D printing model/project, designed and iterated haphazardly on…
I found this and realized it would not fit my airsoft gun so I updated it and remixed another models base into it so it also supports the barrel. Barrel and threads: https://www.thingiverse.com/thing:3626085/files Main Design:…
High-detail 3D printable model with clean silhouette and great display proportions. May need support, slicing, or repositioning for your printer setup. PLA or PETG recommended. ➤ More models available on Cults3D:…
Specifically designed to mount CarryBright Turn Signals (ASIN B0B9XMZZWG) on an Inmotion S1 scooter. 3mm zipties necessary to attach the remote mount, either zipties of screws and bolts for the signa; holders. Optional plug to help secure…
To fit lead screw nuts to Mendel90 Z-axis. See photo's. Parametric .scad file, can be adjusted for other sizes. Print Settings Printer: Mendel90 Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: PETG green (does not matter)…
It happened to knock off something from my espresso machine top, so I decided that I should make an improvement. I've designed and printed this grid, with magnetic foots and modular stands to place and organize things on the top of this…
A simple drop in diffuser for the Neewer TL96RGB.
Just a little set of parts to adapt a WELL L96 airsoft chassis to a CZ457 22lr backyard popper. Instructions here: https://imgur.com/a/ja47I1v I printed these parts in nylon, but use whatever material you want. The large adapter piece…
Printed this case, dimesions are perfect but I am clumsy and needed more cushion
I wanted a protective cover for the spare batteries in my HL900 head torch from Decathlon. So that the contacts are protected, but above all the USB-C port doesn't get dirty.
I just made this model of my laptop, in my laptop, when I was bored. It's a Lenovo Yoga 7 2-in-1 14IML9. You can use the assembly files to model cases or other mods for it, or you could print it, although it may require support in the USB…
I printed a selection of fan ducts for my Mendel90. Some of them didn't fit and others just didn't work, so I designed my own. I have copied some of the best features from other designs and merged them into a model that will fit on the…
Probe finally arrived and fits perfectly fine. Needs 2 M3 nuts and 2 M3 screws. Guide the ribbon cable along the existing X-carriage cable. You may have to crimp/solder the connectors after passing it through the sidewall, it will likely…
because the original version is for the e3dv5 i have mixed them up .. i make it smaller and without support .. the bottom is open for better fit with the nut from extruder .. just printing this version .. update: printed very well and…
Modified to fit on the NH-L9a-AM4NH-L9a-AM4 cooler increasing the height of the duct to fit flush with a S300 Mini-ITX Case. The height is now 20mm Temps improved by almost 10 degrees as you can see in the photos. Machine: Ender 2 Pro…
A simple barn door design that makes it easy to modify the light flow from the amazing and inexpensive NEEWER TLC96C or TL96RGB LED lights. The more expensive models have these barn doors, but unfortunately these cheap models do not, so I…
I was looking for another magazine for a Steyr L9-A1 and was unable to find one available. I decided the available Steyr A2 MF 9mm magazine could be most likely converted to fit. I then created a spring plate and magazine cap to convert…
L9110 Motor driver model that you can use in your electronics projects. .step and .stl files included.
Bracket for mounting ML90640 thermal camera to microsoft lifecam studio webcamera. Printed in pla, no supports. 2x m2 nuts and bolts needed to mount the thermal camera. Force fit on the webcamera.
This lets you mount a myQ garage door remote (model L993M) to the wall. There are two versions. One uses separate top and bottom pieces that snap together with twelve 2x1 mm magnets on each side. The other is a single solid model meant to…
Update: Added pictures of the final revision. Working flawlessly so far, can easily run 10mm/s or more with no noise. I got really tired of the Mendel90's threaded rods.. they're slow, they take so many steps (3200 steps per mm!) and make…
This is a base/case that I designed for my 4x4x4 PL9823 RGB Cube. The cube itself is mounted on a 10cm x 15cm protoboard and this base is designed around that. This was created in Tinkercad, so if you need to make changes you can grab a…
Still in prgress. I ordered the wrong fans. They just run good at 12V, but i want a PWM 0-12V blower fan. If anybody knows a good blower fan, please comment. This is the fan i designed it for: http://bit.ly/1YWLV7y At 100% (12V) both fans…
This is a remix of @DanielBull's nice Z probe ( https://www.thingiverse.com/thing:599262 ), hand-modified to fit the "sturdy" variant of Mendel90. It additionally allows for an extra block for adjusting the distance to the X endstop - in…
Holder to mount a silhouette cutting plotter blade (drag knife) on a Mendel90 3d printer, to use the 3d printer as a cutting plotter / vinyl plotter. Might fit other printers as well. Meant for SILH-BLADE-3-3T, fits on extruder mounts…
Replacement central front suspension mount for the easily broken one on the WLtoys Wave Runner RC car. A very simplistic part that replaces the broken items pictured,not as pretty as the original but it prints very quickly and does the…
Коробка для оптического механического соединителя
Have you ever wanted a scuffed door camera instead of giving your privacy away to Bezos and his Ring cronies? Well you're in luck! Buy a dome camera with 2-way audio, like this one from Amazon which this model is based on, cover it up…
Switch Model: Sodola Website Amazon To secure this in the rack you need: 3x m3 square nut 3x m3 screws 20-24mm long
This is a 90 degree exhaust port with a locking mechanism for Carverall machines. Printing: Supports required Use a high temperature material (PETG, ASA, ...) Usage: Snap the fume extractor duct onto the port and turn it clockwise to lock…
So this is a thumb screw for the two bolts! The first times, it can be hard to put on the screw but after a few times it will fit! Instructions 100% Infill 0,2mm layer height Category: 3D Printer Accessories
This filament cleaner works with side mounted filament rolls. It will clean you filament from dust. The thing has a hinge to guide the filament without friction, also when you filament roll gets nearly empty. Please upload a photo of your…
si la machine est bancale, comme les pieds ne sont pas réglables, cette rondelle de 0,5mm permet de rehausser un pied en la glissant entre le pied et la machine. enlevez le pied, y mettre la rondelle puis remettez le pied.
Gontier_5x5x5_E1_K3_L9 - Peng Song (Gontier adaptation) A size 5 cubic puzzle of 3 pieces, rated at level 9 (moves to remove first piece). Adapted from web page:…
A LED holder for the mendel90 dibond or sturdy fan duct. Holds 2 5mm LED with a LED holder. All parts from radioshack. pn: 276-0080 & pn: 276-0017...i used a little hot glue to hold it to the fan duct. Even with the hotend at 275C it…
When I bought a new hot end from E3D-online I discovered that it wouldn't fit inside the fan duct on my Mendel90, so I redesigned it. This duct is for a 60 mm fan and has a larger central hole and a slimmer profile, which allows it to sit…
This shroud fits NumberSix's X-Carriage Fan Mod , the Greg's Wade reloaded extruder (Mirrored JHead version), RalphHiltons Part-cooling fan and the E3D v6 Hotend. The fan holes are 2.5mm to tap an M3 thread into. The hole at the top…
3D Scan of Pattfield PPL900B electric plane. Scanned on my Creality Otter.
Tank width 501mm, glass tiknes 6mm
There is a LYZRC L900 pro drone. It flies well, but the stock camera doesn't capture very well, and sometimes we want to capture our moped rides from the side and share the beauty of our nature. As a solution, we decided to use the SJCAM…
This is a remix from Nopheads mendel90 wade extruder. The extruder blok is made for E3D v6. Use the bowden tube from the E3D, and make it a tight fit at the extruder gears. Use the same vitamins from the original Nophead extruder. The…
Parametric OpenSCAD design to generate enlarger masks for Durst Bimaneg carriers. Print two to sandwich your film, or print one if you have a sheet of glass in your carrier.
revised the Y axis adjuster a bit to be more sturdy... i had it break twice with really good prints...both broke in the same spot, right at the rear hook portion...so i beefed it up a bit... worked like a charm... will post a photo as…
Smoothieboard mounting plate that adapts to the pre-drilled holes for the Melzi on the Mendel90 DiBond sheets by Nophead. The adapter was remade in OpenSCAD, please check dimensions first. I pulled the hole dimensions from the…
This shroud fits NumberSix's X-Carriage Fan Mod , the standard Mendel90 wades extruder , RalphHiltons part-cooling fan and the E3D v6 hotend. I've made another version for the Greg's Wade reloaded extruder :…
I've bought a cheap MXL990, repainted it and wanted to replace the capsule to improve the sound quality. You could go with microphone parts setup but it's pretty expensive for a test DIY project so I've ordered a Chinese RK-47 for much…
Model used for full play outside - Print in PET-G or ABS in full as you need resistance
This is a remix of https://www.thingiverse.com/thing:7103145 that is specifically adapted for the Lelit Victoria (PL91T) espresso machine. I printed this model using flexible TPU, which provides durability, dampens vibrations during…
Customized version of https://www.thingiverse.com/thing:4753880 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=4753880 Instructions Using the following options: ring_size = 20.52 ring_width = 7.9…
A quick lock mounting device for Decathlon's FL920 bike headlight Print advice Print the body vertically to limit overhangs and avoid delamination during usage. Print the lock pin on the side to avoid delamination during usage. Add enough…
## 📦 Model Summary — Enduro Phone Holder (Pixel 9) Purpose A rugged, vibration-tolerant handlebar mount designed for off-road (enduro) riding. It secures a Pixel 9 using a flexible TPU bumper plate and attaches to the handlebar via a…
Mount your Sodola SL902-SWTGW124AS switch to an Ikea Skadis board. You need two M3x8 countersunk screws to mount the parts to the bottom of the switch. You also need these T-nuts to screw the holder to the board. Update 2026-06-15: I've…
Two of these brackets mounted on the side boards will support an axle capable of holding 5kg of filament. Instructions Print with plenty of infill to make it strong enough to support the weight. Position the bracket on the board as far…
Just the first design. Does not look good from the front because of the round dibonds. Next version will be better. ;-) DONT USE THIS! I designed a new version http://www.thingiverse.com/thing:735726 Category: 3D Printer Accessories
