Counting matching models…
SpaceX landing pad. Printable with single extrusion printers. Print instructions The gcode contains M600 commands for filament change at Z3.0 (change to yellow) and at Z3.4 (change to white). Dimensions: 127x127x3.6 mm
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
I couldn't find this exact model here so I brought it over. https://www.thingiverse.com/thing:919475 Photos are Prusament Galaxy Silver PLA.
Print approx. €13.20–€16.13 excl. taxPreliminary estimate for one variant
SpaceX landing pad from the drone ships "Just Read the Instructions", "Of Course I Still Love You", and the newest one “A Shortfall of Gravitas”. Print one or all three. Print instructions Start with a base color of Charcoal Grey or…
Print approx. €4.47–€5.47 excl. taxPreliminary estimate for one variant
On July 20th, 1969, the world felt just a little bit larger as Neil Armstrong and Buzz Aldrin set foot upon the lunar surface – the first humans to ever do so (only after leaving their friend Michael Collins alone in orbit about the…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET
When I crashed my M4 Max, I broke the original landing skid which - again - wasn't on stock at my local supplier. Fortunately I found this https://www.printables.com/model/1345426-omphobby-m4-m4-max-landing-skid-updated-version to keep it…
Subscribe Now! Time-lapse print video : https://youtu.be/F1pj7ACaZ70 Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…
Supports needed in the connector areas, everything else is self supporting. Nice small little ramp for inline jumps but is speed sensitive.
Drone landing pad 300 x 300 mm designed for my DJI Mini 2. Printed without top and bottom layers (black part), for a better effect. Print 2x Part 1 and 2x Part 2. Print instructions : Layer height : 0.2 mm. Infill : Honeycomb 20 %. 2…
It works with 9gr micro servo. A single servo or two separate servos can be used. Material: PLA Print setting: 3 walls and full filling 2.5mm steel rod can be used for struts. 4 pieces of M2.2 or 2.3 (Length 6-9mm) screws are required.…
String art featuring an Icelandic horse. Print at 0.3mm layer height without supports. If you are using Prusaslicer check the 'detect thin walls' box and make sure the 'wipe while retracting' is unchecked in your printer settings.…
I use a landing pad for landing my DJI drone where the terrain is unsuitable. For example, higher grass or twigs. The landing pad consists of four identical parts that are connected with locks with neodymium magnets sized 6 x 3 mm. Every…
Landing gear frame for rc planes. Wheels are not included. Print with low infill percentage to contain weight, no supports needed.
Yet more DJI Mini/Mini 2 Landing Gear Extensions. These are light, about 5.5 g for all four. They add about an inch (25mm) to the height. I used PETg, but they should be fine with other materials. I used .20mm layers. Could have used .15,…
Currently not printed yet. Once a print comes out, I’ll update the recommendation. STONE ONLY: https://www.printables.com/model/366726-rammstein-rubble-3d-logo
Inspired by https://www.printables.com/model/88-spacex-landing-pad by https://www.printables.com/@Cipis Printing instructions Final perforated look is created only by slicing settings. Inner part is without bottom and top solid layers and…
I downloaded the Free version of Eclipsons Model A. but there is the fuselage with the Landinggear not included. So i designed one to glue on the free version. it takes D3mm steelrods, wich are bended in shape. 15mm then 90° angle, then…
Print Settings Rim Materials: PLA - quick and easy, but could break from UV radiation PETG - should be a bit tougher and less prone to failure Print Settings: Walls: 3 Infill: does not matter (should be solid at all parts anyways)…
This landing gear will improve the landing capabilities of your drone and protect it from the ground, especially on uneven terrain. One pair of legs is closer to the previous triangle design and the other is more rectangular, probably…
See below for important print settings. Inspired by the basalt stone columns located in southern Iceland, this planter features a stone-like texture that captures the natural beauty of Reynisfjara beach. This planter also features a…
This is a design I came up with to solve a problem on my 7 inch Long Range Drone build. I had to stick the high powered VTX on the bottom of the frame, so I needed to lift up the quad in order to give the VTX clearance. I call it the…
by wichiman I made some changes. I found the clamp was too narrow so it was hard to clip on. I cut the opening a little bit. Also I made the feet thinner, from 5 to 3 mm, but without the clamp. It is still 5mm thick. I recommend PETG for…
Landing gear Potensic ATOM/SE New design and model Atom Can record video without seeing the ski legs (wide angle legs) May be seen slightly when adjusting the camera angle down to the ground 90 degrees (only when turning and stopping…
This is a 5 gram skid for use on a DJI Mini4K or Mini 2 lightweight drone. The skids weigh 5 grams and print easily; I used ASA but PETG or PLA should work too. The skids keep the props from mowing the grass when taking off and landing.…
Yeah that small drone is flimsy. I do understand, betafpv shaved every gram to keep that thing as light weight a possible. But I really didnt like the fact, that this small beast will tumble all over the floor the moment you up it on the…
Functional nose retract. Retractable landing gear for RC airplanes. Can be used for models with a flight weight of approximately 700-900g. All parts were printed with PLA filament. No special settings are required. Standard settings are…
S'imprime en deux pièces qui s'emboite. no support 20% infill
This is a pattern cutting tool for cutting patterns into traditional icelandic leaf bread/snowflake bread . Leaf bread is a very thin deep fried bread or cakes prepared as part of christmas preparation in Iceland. They are decorated with…
The best things about 3D printing is getting to print things you loved as a kid, the Battlestar Viper is one of mine. I searched and found many versions. I wanted one with landing gear so it would sit better as a display. So, I started…
These extensions for the landing gear of the dji mavic mini and dji mini 2 raise the drone by 35mm. They are ultra light
Marston mat was a landing material used in ww2 by Allied forces. The one in the file is 1:35 you can simply adjust the scale by multiplying the lenght by 35 and then divide it by your scale in Tinkercad or different
I wanted to print JonW's very nice four-part drone landing pad with my new MMU2s upgrade. I reworked the original into separate components and then assigned them out in PrusaSilcer. Also used Prusa Silcer to set fill pattern on the base…
İki tekerlek ekledim ancak birini silebilirsiniz.
CHECK PROGRESS DESIGN UPDATES FOR ANY CURRENT ISSUES WITH THIS PROTOTYPE This is a custom made Drone Landing / Launching pad . The landing pad comes in 9 parts, making it easy to carry it on the go. and because you can disassemble it, it…
Landing stairs
This is a simple, light weight stand or landing gear for the Pavo20 series with 3s cells. It helps to stabilize the copter for a controlled take off as it will not roll over the lipo pack one or the other side. The idea is not from me but…
This is an improved version of Roboprint3d's Landing gear. I modified the mounting clips, so that they fit better on the Mini 2 and removed the arrow, beause this was a weak point. Verbesserte Version von Roboprint3d's Landefüßen. Die…
Hi, It is my idea for shock-absorbing landing gear for quadcopter with F450 frame. 2 legs on opposite sides should be connected some kind of elastic cord, spring or maybe strong rubber band. It should absorb some of impact of hard…
Tinkercad link: https://www.tinkercad.com/things/0kRpBS4Cg1W?sharecode=6kN3a2g34ayUWGJo7YCtOi2dTgR2xReh_tc8fQjRNHo Noncomercial use only. Feel free to remix/adjust as needed.
Servo powered retract with locking mechanism for rc planes
🦅 Low Poly Eagle – Abstract Minimal Animal This low-poly eagle captures the powerful moment of landing, with its wings spread wide and talons touching a geometric rock base. Designed in a clean, faceted style, the model focuses on strong…
landing flaps hinge for RC models
landing flaps hinge for RC models
Inspired by Game of Thrones / A Song of Ice and Fire, and House of the Dragon , here's our rendition of King's Landing ! King's Landing is the capital city of the Seven Kingdoms of Westeros, in the fantasy world created by George R. R.…
Extended legs for the DJI Mini 2 for taking off/landing on long grass, etc. Remixed from the lightweight skid design at https://www.thingiverse.com/thing:4750938 Printed with PTEG 10% infill to reduce weight
created a little landing pad for my DJI mavic mini drone. Printed the “H” at first and after that immeadiatly the body upside down without moving the printers bed have fun with it
Two colour simple design, 120mm diameter, printed using 0.15mm layer height, Prusament Galaxy Black PETG and eSun Yellow PETG. Apply the colour change at layer 14. Enjoy!
I made it of ABS with 3 perimeters and 20% infil, it is solid for the joytrainer mini, and has good elasticity, the weight of the plane is around 650 grams, if it needs to be more resistant you can add a wire in the center you will find a…
Space 1999 Eagle 1 landing platform for Space 1999 Eagle 1 by Al Mon: https://www.printables.com/model/21219-space-1999-eagle-1/comments/2052312
Supports required. Will fit on an Ender 3 Pro standard print bed if angled. Not sure about other printer beds. Works with standard Hot Wheels track pieces. See photos.
This is my version the MCRN Landing Skiff from the show Expanse. The model is in scale with my other MCRN ships and comes with retractable PDC, Retractable engines, openable main hatch and “posable” guns. It is a kit and does not require…
K-9 Landing Leg system is an open source landing leg system designed to soften impact at landing, and keep your vehicle upright. I have gotten numerous requests for these files, and after a lot of testing and redesign, it is finally out!…
The sjrc f11 pro drone has a very low rear propeller, therefore it has problems with landing on grass and rocky terrain. Mounting the landing gear solves this problem (If you do not have a landing pad), because it raises the drone…
The landing gear prints as a single part then is folded to fit onto the DJI Mini2 drone. No assembly or additional parts required. The weight is about 7 grams.
This is a landing protector I made for the Drone Pro. its a non expensive quad copter. I printed it with a 0.4 nozel, after printing make the two stems warm enough that they can bend and then bend it into shape using an other protector as…
Originally remixed to make it easier to fit on a smaller print bed, but the added flexibility of positioning the ramp and landing anywhere makes it fun for building more “extreme” track layouts. Try to see how many benchies you can clear.
I used the landing coordinates from the Chandrayaan-3 Wikipedia and Moon Trek to generate a 3D print of the moon surface. The print shows +/- 1 degree of latitude/longitude from the landing site with the exact landing coordinates being…
The video below contains assembly scenes for the Landing Gear.
Landing Gear Grip
C-9979 Landing Craft for Star Wars Armada. Come in two scale (small ship and flotilla). Designed for resin 3D printers, for best result print at 0.05mm with AA2 or 0.02mm no AA. If you like my work and want to support me you can visit my…
These TPU landing feet are custom-designed to mount under each motor on the Rekon 10 Pro frame, providing durable skids for smoother landings and protecting the frame during takeoff and landing. Each foot/skid has 4 mounting holes to…
Remixed from Greasetattoo original design. Sweeping the other direction and without spikes. Fits my HobbyKing Q450 frame/arms Category: R/C Vehicles
The stock landing gear skirts are very fragile and one rough landing and the tabs will break off. These are direct replacements for the stock design, but use small zip ties to attached the skirts to the landing gear assembly and will…
Nice little 3D print to add little and light landing feet to the BetaFPV Cetus pro tinywhoop drone! Made to press-fit between the 3 protruding edges and print with the pointed part up. Gives around 4.5mm extra ground clearance. Depending…
Thank Flywoo for the Arm protector model - you can download that for free from their website. Without these Skidpads / motor protectors / Standoffs (whatever we call them), the Explorer LR4 wobbles and lands on its Beeper. These make sure…
DJI Avata landing feets I need more space between ground and the avata, so i created this landing feets. i printed it wit PETG https://amzn.to/3TztjKk If u want a more special one u can take a look here…
A landing gears i designed for my RC airplane. I still didn't print it but if you did please reply on the comments and rate my design, your feedback is very important. The dimensions are the following: The base plate: 60x30x11 mm Whole…
My friend let me borrow his DJI Mavic Pro for a while, warning me that the previous borrower had crashed it. That crash mean the front left landing leg was snapped off, leaving the antenna exposed. This piece is as close to the original…
Printed on Mk4 from PETG
Print with 0.2 mm layer height Hardware parts: M3 heatset inserts M3 screws 10mm diameter tube a compression spring (100mm long) a tension spring (20 mm long) LM8UU linear bearing LM8UU linear rod (60mm)
Parts for this drone seem scarce, so I designed a replacement leg for the Evo 2 Pro. Depending on which side is missing, you will need to mirror the STL file. The leg is larger in width than the original to compensate for the fragility of…
Preferred printing at 0.1mm steps using any colour ABS or PLA. Print at 100% infill given its a relatively small component and the strength that a 100% infill provides, is required. The knob attaches via a 3.4mm hole that needs to be…
Hey Pilots, this is a crazy little design. Why this? I Don't know. It adds about 2 grams on the weight and It Is useless but why not? I want to have legs of my Cinelog35 as brand new. Bumpers are suitable for Cinelog35 V1 or Cinelog35 V2!…
About The price of original retract (1-01759) seemed rather high for a pack of screws and plate of milled plastic, so I decided to design my own based on photos available on the internet. I had to alter some dimensions (mostly main body…
A detailed 1:144 scale model of Blue Origin's New Glenn Heavy Lift Rocket Powered by 7 BE-4 methalox engines and 2 BE-3U hydrolox The centre engine can be pushed upwards to deploy the 6 landing legs Includes Blue Moon MKII as a payload…
Fpv Landefuss Dies ist ein Drohnenzubehör um die Motorschrauben beim Landen zu schützen. zudem kann man mit diesem Zubehör auf glatten Oberflächen skaten. Druckeinstellungen Infill: 100% Filament: Abs / PetG / Pla / usw. Stützstruckturen:…
I recommend %100 infill for the struts and %5+ for the skid pipes. If you choose to print the skid nuts, I recommend printing them with TPU.
Bring realism to your flight simulator with this A320 landing gear lever replica. Built using just two limit switches, a few screws, a spring, and an Arduino (Mega, Mega Pro Mini, Pro Micro, Uno, or Nano), it’s simple and effective. Fully…
Little Gadged for the DJI Avata. If u need unique landing feets… ;-) i used orange PETG for printing https://amzn.to/3TztjKk If u want a more unobtrusive Landing Gear take a look at this one:…
My friend had some of these in metal and asked if I could remake in plastic. I did, and tried PLA, FLEX, PC, and PETG. The PC he said worked the best by far. I guess that's no surprise. The design he sent in metal had no reinforcement…
Nothing terribly difficult about assembly. Need to print two .30 Cal MGs.
In schwarz drucken sonst spinnt die Hinderniserkennung!! Einfach mit einem 10mm Klettband befestigen, alternativ Isolierband oder Kabelbinder etc. Den Schlitten mit Sekundenkleber in die Aussparungen kleben. Print in black else the…
Never drag your payload again! This set of 3D models are a direct fit for the original landing gear that come with the SK450 from Hobbyking (or elsewhere). They use the same mounting system as the originals, so they require the use of the…
File - "Landing Gear V2.3" is best to print with resin printers. File - "Landing Gear V2.4" is best to print upside-down with FDM printers. Layer Height - 0.2mm Infill - Min. 20% Recommended Material - PETG, Resin
Landing gear lever used for flight sim. The hardware used is: Arduino nano 2 - A3144 Hall Effect Sensor 5 - 7mm x 1.5mm magnets
Remix of the v1.1 skid for the Mavic pro, the original doesn't remove once it's on so I made it removable but still won't cover the sensors underneath. Approx 30mm or 1.2inch lift. May get an update that fits a little nicer underneath,…
For those who, like me, tend to crash their RC helicopter just when the spare parts are out of stock. I modelled a replacement landing gear for my favourite helicopter, thinking that I'm going to need a few more in the future. Besides,…
Does what it says on the tin. Fast wireless charging (Max 10W). Can print with or without MMU. No electrical knowledge or soldering needed. Screwless design, just glue in the PCB and coil, the 2 halves snap fit together. Works on any Qi…
This is a battery tray and landing gear plate that fits on a 10mm by 10mm stick – like that on the GWS Slow Stick. Carbon Fiber Landing Gear: https://amzn.to/3Qfskvm
Minimalistic easy to print and assemble folding feet for laptop rear side elevation and better air flow - heavy duty version with many new features. It's an evolved V2 version of initial model of Minimalistic Laptop folding feet . New…
Llavero de Coco, mascota del album Felicilandia de Alvaro Diaz.
I adapted the base because I wanted to use a reed switch to turn the LEDs on and off. The unexploded bomb (based on https://www.thingiverse.com/thing:2821562 ) hides the magnet that is used to activate the reed switch. Depending on the…
Landing skids for the Source One V5, recommended to print in tough PLA, optional TPU plug to keep dirt out and be able to access the screw underneath to change the bell without removing.
This is a remix of the landing leg struts for the Falcon 9 Model by AntsinAfrica https://www.thingiverse.com/thing:2914233 . I found that the original ones were a bit weak and the clip didn't work that well for me. My version made the…
Whether you need to get above an obstacle or want to take your takeoff / landing skills to the next level. Built to take advantage of a Prusa spool, print the parts, snap into place and let you imagination take flight. Print instructions…
A platform designed to float in a dish of water so bees can land and take a safe sip! I made several versions, each is 7-8" in diameter but you can adjust the diameter to fit your water container. Have fun helping the pollinators!…
made for smaller drones print base part (1-2) in 5% infill for eficiency. now including 5mm holes! (for pins and 5mm LED diodes, also can use it to screw it or smth) pins can stabilize pad on uneven ground fusion 360 model here update 1:…
Note: Print in ASA or other UV resistant material if this is going to be out in the sun for extended periods. No Supports needed 1 model per plate (Fits in Bambu X1C/P1P - anything with 256mm Cubed) Note: On Bambu X1C don't print the…
Drone Parrot Bebop 2 landing gear replacement. Printed with Nebula PLA filament 15% infill.
Landing Gear for Dji Mavic Mini, which clips under the drone. Fit with the dji case; no need to uninstall it before park
![print-in-place Landing skids for DJI Mini 2, Mini 4K drone [UPDATED]](https://media.printables.com/media/prints/cd1d2ea4-b05a-4c9f-8e33-aff682509338/images/11605224_92836e97-9b8d-472c-b412-5a83f33ecc83_6bcc2588-1b8c-432d-9f8b-a7dc1c174f7e/merge_088_107.png)
![FPV Drone Landing Feet [19x19mm] (eg: for the Rekon 10 Pro)](https://media.printables.com/media/prints/1082369/images/8183131_8ecd968c-6b23-464b-bf70-d2fc79b6c8d3_73b21e60-60d6-45c5-a53f-c65c20a96fbe/photo2.jpg)
