Counting matching models…
A koozie for your seltzer. Keep it secret. Keep it cold. Now with more sizes. Soda/beer koozie now available. I have tested the 12oz koozie with selters and Red Bull. Both have fit perfectly for me. Version 3 has an air hole and some…
Print approx. €4.81–€5.87 excl. taxPreliminary estimate for one variant
Das mit dem Wasserhahn mitgelieferte Werkzeug ist meistens verschwunden wenn man es doch einmal benötigt. Mit diesem einfachen und schnellen Druck muss nicht teuer ein Spezialwerkzeug gekauft werden, wenn man die Düse des Wasserhahnes zur…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
FPV stick Simulator PS5/4 FPV stick for PS5/PS4 controller. Inspired by Taranis QX7 stick I advise to print with supports on the plate
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Platonic solids, a classic. It includes an exhibitor with their names. You can print it in Catalan (Base_40_cat), Spanish (Base_40_es) or English (base_40_en). Combine your favorite colors. New: Also see this new version with a circular…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Gas cylinder spanner for camping or barbecue gas cylinders with spanner for gas pressure reducer, 30mm, 18mm and 17mm. Dimensions: Width 168.17 mm Height 8.00 mm Depth 56.20 mm Print: PETG Filling: 100% Filling pattern: straight No…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for PETGSource material: PET
Use 3 walls + 25% infill. The Perlator / Aerator Key is a simple practical tool designed for removing and installing aerators on sink and faucet taps. The set includes 3 double-sided tools , with each side designed for a different…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Gas regulator key for gas bottles (5 kg, 11 kg ect.). Nut diameter: 26 mm. Suitable for small bottle connections with butterfly nut.
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Scalp Massager – Stimulator and Stress Reliever Product Description: Introducing the Scalp Massager, a simple yet highly effective tool designed to stimulate your scalp and relieve tension. Instead of traditional steel wires, this…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
This is a wearable, printable replica of the iconic Squid Hairclip from Splatoon. It's the headgear piece you can get from the Inkling Girl amiibo. To make this, all you need is Black, White and Green PLA, a (large) hairclip, and…
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for one variant
Created this minus the cube to help learn with Fusion 360. My daughter is learning about Platonic solids in school at the moment. She asked if I could print her a set for each classmate. So this is the end result. Feel free to use however…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
This is simple adding machine. Main design of idea and some mechanical principles are taken from Canadian woodworker https://woodgears.ca/ I first saw his marble ball counting machine made out of wood about 10 years ago. Now I decided to…
Print approx. €15.70–€19.18 excl. taxPreliminary estimate for one variant
Hang your Regulator to ensure everything is dry before putting it away. This hook screws onto your first stage and allows easy and fast mounting. I recoment printing with at least 20% infill as, depending on your diving layout, the forces…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Ein Schlüssel, für die Größen 18, 22 und 24, um den Perlator von einem Wasserhahn zu lösen oder wieder anzuziehen. Die üblichen Werkzeuge sind sperrig und nie zur Hand. Leicht verstaubar lässt sich damit schnell ein Sprudlerkopf vom Hahn…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
Roll it to do close-range chip damage, throw it for a long range homing blast: the torpedo! About the size of a marshmallow, this is either a large keychain or a nice desk ornament. Everything should snap together with press-fit…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
These are cases for the VGA or HDMI version of the ZX Murmulator ZX Spectrum emulator PCB. I made it from a generic case design imported into TinkerCad and very extensively modified by scaleing and adding components and cutouts to fit the…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant
Inner part for Aearator M24.
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
A simple key for the Grohe Start Single-lever sink mix (Nr. 30307001) aerator / perlator. This one has a inner radius of 11 mm and 4 nooks. Can be easily customised with FreeCAD use the Dimensions spreadsheet if you need more nooks or…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
It would appear that I've been making a lot of diving-related hangers recently. So here's another one. This one is intended for my regulators, although you could hang other stuff from it. Judging by the shape of its lower part, maybe it…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET
Four separate .stl files of platonic solids. In order to size them to be typical beads for stringing, ~10 mm, scale them as follows. Cube 40% Octahedron 50% Icosahedron 30% Dodecahadron 20% A .3mf file and a .gcode file for the Mini/Mini+…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This model is based on the band Depeche Mode - Violator. Some edits were made at certain points to make editing easier. A PLA printed earring. I recommend reducing the printing speed to 80% either from the machine or the program you are…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
2 piece model. Printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
22 mm perlator/aerator tool
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
Patients with COVID-19 in serious or critical condition often require assisted breathing via ventilator. As the number of patients in need of ventilators grows (exponentially in many densely populated regions), there are not adequate…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
Linked dipole links. Use your preferred method to connect the wires (I use alligator clips). These can also be used as end insulators by passing the rope through the hole in the center. I printed in PETG at .3 Draft settings, and they…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Something designed, hopefully never to be used. Having tried out a few methods to split ventilation from one ventilator to multiple test lungs, this is my latest solution. It is designed to be simple and fast to print. The splitter has…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
Apart from the basic functions that you can expect from a quarter circle protractor: Measure angles Draw straight lines and right angles Find the center of small circles You can do most of the functions of a scientific calculator with…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
The cover holding the window regulator switches in the front door of a Peugeot 205 (1983-1998), originally designed for a 1991 build. The originals are often heavily erroded from sunlight. No extra support needed, comes with integrated…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant
Dust caps/plugs for the high and low pressure ports of scuba regulators. These are for regulator storage/transport only, there's no provision for any O-rings and don't expect these to withstand actual cylinder pressure! The thread part…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Did you know that you can multiply two numbers using a parabola and a ruler? This template let you easily draw a piece of a parabola. But don't be fooled, it's much more than a simple drawing template… You can draw a parabola , its focus…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Turbine
Print approx. €6.94–€8.48 excl. taxPreliminary estimate for one variant
I was inspired by Matt Parker's recent video ( https://youtu.be/oTWeuyDMgwo ) on compound platonic solid, and wanted to print a 5-cube compound platonic solid myself. I unfortunately could not find a good-quality 3d model of it, and…
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant
This spacer lets you use a 12oz can in a 16oz YETI Colster Can Insulator, as well as other can insulators, as it just takes up the difference in height between two different can sizes. But is has an additional feature, which is to hold a…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to 3D print the five (5) Platonic solids for my granddaughter, but could not find on this site. Decided to create and share. Learned a ton by doing it this way. I encourage you to follow this (or similiar) vidoes. I sped up the…
Print approx. €13.58–€16.60 excl. taxPreliminary estimate for one variant
Always had issues with removing the perlators from the tap to clean them. In the past just used a wrench, but always damaged and scratched them. So I finally decided to design a tool for it and print it. Hope you find it usefull. Print…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
For my Living Room Ventillation from Envervent the Pulley for the Heatexchange broke. I printed it with PETG 0.4 Nozzle 0.2 Layer 30% Infill 4 Perimeters on my Mk3s+
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Little Green Army Women : Mortar Platoon Commander : The Witch or Vidma of Bahkmut.
Print approx. €5.16–€6.30 excl. taxPreliminary estimate for one variant
An end insulator for attaching the wire end of wire antennas at the ends opposite to the feed point. PETG is recommended for strength and resistance to sunlight This 3D‑printed design is provided for personal use and educational purposes…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
This is a project I worked on last year but never got around to finishing in time. We were going to do a project run on theRPF but it took so long to get the 3d printed parts ready for casting that it was clear that this just wasn't going…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Isolator on hamradio HF wire antenne. Izolátor pro drátové anténa na KV
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Needed a solution to isolate my speakers from their stands. I bought some squash balls from Amazon and designed this bracket to hold them in place.
Print approx. €5.17–€6.31 excl. taxPreliminary estimate for PETGSource material: PET
The bayonet adaptor on my inflator broke so the bayonet would no longer attach. So I designed this replacement. It also fits into the deflation port. I have the CIT1800G inflator and it fits perfectly, but it looks like the P747 has a…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
This splitter design is the modified version of "3D Printed Circuit Splitter and Flow Restriction Devices for Multiple Patient Lung Ventilation" by "Alexander Clarke". In the original design, corner and sharp edge is present which in…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Lo imprimí en PLA.
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Printed this 510-Connector Insulator as a Replacement.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
ENG: I designed a cordless phone holder (60x60mm) and a glass holder (80mm diameter) for a walker so that the hands are steady on the walker and free from objects. You need 4 cylindrical head socket screws (5x20mm) and 4 nuts for each…
Print approx. €13.75–€16.81 excl. taxPreliminary estimate for PETGSource material: PET
Slided with UltiMaker Cura 5.6 Printed with Original Prusa by Josef Prusa Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA PLA Notes: Simple Model works…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Tentaku Mechanical Calculator Case Background: I had a lot of fun building my Tentaku DIY Mechanical Calculator kit , but the included case was a somewhat flimsy acrylic sheet. I wanted something a bit more bulky to protect and hold my…
Print approx. €5.02–€6.13 excl. taxPreliminary estimate for PETGSource material: PET
Overview Lightweight and durable dipole link insulator designed specifically for Wago 221-412 connectors. Ideal for portable amateur radio setups (SOTA, POTA, field days) to quickly connect or disconnect wire segments and change bands on…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
Prusa Mini + Z axis horizontal top handle in combination with vertical handle, generate the two-points leverage support for ergonomics as a system to relieve tension on the ZY Axis structure frames, and provide balance support to the…
Print approx. €8.48–€10.36 excl. taxPreliminary estimate for PETGSource material: PET
Gas regulator for lawn mower AL-KO Comfort 52 BR
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Project info Motor in original model is connected in a way that allows it to spin in both directions. We can use that to connect LEDs parallel to it, and thanks to their property of passing current in only one direction we can connect two…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
these paper roll holders fit into the original recesses of the Canon P39-D calculator on the back. They probably fit other models as well. To print them you will have to use supports. I added the g-codes including supports as well
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
Das Bauteil Achse_Huelse_6mm muss 2 mal gedruckt werden.
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Kryt rozšiřujícího modulu pro kalkulátory HP-41c . Může sloužit jako náhradní kryt portu nebo jako krabička pro vlastní ROM, RAM, nebo test modul.
Print approx. €0.27–€0.32 excl. taxPreliminary estimate for one variant
Print with text up. use supports on build plate only.
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Spare parts for the 1€ calculator watch found at Aliexpress and similar shopping sites
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
A holder for my calculator/numpad combo: https://www.pollin.de/p/funk-nummernblock-mit-solar-rechner-red4power-r4-t010b-712119 https://www.tinkercad.com/things/0t3L0AZmTxx-taschenrechner-halter
Print approx. €3.44–€4.20 excl. taxPreliminary estimate for one variant
Remix of @Oswald 's squash ball feet V5 (slimmer one). This design changes the look to be hex and more chonky. Used parts 4x PERFLY two yellow dot squash balls from Decathlon (one for each leg) My print settings PETG 0.4 nozzle 0.2 layer…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
These are handcraftet original made Caña from a real spanisch craftmen and Family of Flamenco dancers. This instrument is meant to reprudice the human clap, and be able to have a higher repetition. This is a very special southern…
Print approx. €22.73–€27.78 excl. taxPreliminary estimate for one variant
This is a prototype enclosure for lumbar puncture simulator. It uses 3D printed lumber spine anatomical model from ALiEM. It is designed as an alternative simulator enclosure when the silicon for molding is not available. Manufacturing…
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for one variant
Many amateur radio operators use doublet antennas that are optimally fed by ladder line. Ladder line, unlike coax, must be kept clear of conducting objects. These standoffs allow the ladder line to be routed in such a way that it is kept…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for PETGSource material: PET
Feel free to Print them in different colors, like in the game If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to enjoy. If you don't…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
Vyrobil som krytku na ventilator NOCTUA 40x40 použitého na chladič motora extrudera.
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant
Attwood 4000 Ventilatorhalterung mit Winkelverstellung - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich eine Halterung für einen Attwood 4000 Ventilator entworfen. Der Ventilator ist eigentlich weiß. Habe diesen zerlegt…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
I recently bought a SDisk2 floppy emulator from myretrostore and it didn't come with a case, so I ended up designing one.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This is a 12V buck boost regulator which can be mounted directly to a battery. Because it is a buck-boost converter it will always output 12V (or any voltage set by the user) even if the battery voltage is lower than 12V. It can even…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
I noticed my calculator took up a lot of space on my desk. Therefore, I designed a calculator stand to store it up-right. As you can see in the last picture, this can also be used as a ending piece for my modular bookstands, and it even…
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
Teaching Aid for Platonic Solids Cube Geometry Print with or without infill your choice. Remix as desired.
Print approx. €3.84–€4.69 excl. taxPreliminary estimate for PETGSource material: PET
I found the Core Puncturing knob on top of the KegLand Mini 360 Core Regulator to be quite hard to turn with low grip when the system had pressure so I made this. I printed it in PLA and it works fine, PETG should be fine too. I haven't…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
After I installed a saddlebag on my bike there was little room left for my light to affix to the seatpost, and still maintain good visibility in the rear (as the bag obstructs view of light). I made this print to attach to a loop on the…
Print approx. €2.54–€3.10 excl. taxPreliminary estimate for one variant
Prints top/bottom down, side by side in about 18 min on MK4 in PLA+. Top is keyed to bottom so the 5V/12V always line up correctly. Two small press mounts for the PCB. Notch on one side to easily pop open with screwdriver. Vents in top…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
100x160mm sign, with atom art. The recipe for the cocktail version of the atomic discombobulator involves lab ethanol and a spritz of superheavy water. Given that tritium and derivatives are expensive and often subject to radioactive…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
I printed with PETG at 0.15mm layer height. I used 100% infill and turned on “bobstro's supports," which are saved in the .3mf file. The tall end of the axle attaches to the large plastic gear with a screw. The other shorter end rests…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Case for Casio FX CP400 calculator with space for felt padding. Simple design with closure, you can open the box by lightly pressing the bottom part and pulling the two parts apart. After the 3mm thick felt is glued in, the calculator can…
Print approx. €15.41–€18.83 excl. taxPreliminary estimate for PETGSource material: PET
I keep an inflator chuck near my bikes in my workshop so I can quickly top off the tire pressure before starting a ride. I used to tuck it behind a piece of Romex wire on the wall (LIKE A CAVE MAN) but now that I have an MK3S+ and I know…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
DIN-35 mount for Pololu D24V150F5 . It has two internal M2 nuts in the print. Due to this, you must remember to make a pause in the G-code to place these. The tolerance of the nuts is small, so I used a heat gun to melt the nuts in place.
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
The Rokit Up is a fairly compact inflator, but the hose is easy to lose if you don't want it poking out of the top all the time. This clip sticks to the back (it's 24mm wide, the same as a roll of 3M tape), and keeps the hose safe.
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
“ Official Digital Calculator of the Zlotnian Space Program ” The Zlotnian Calculator is a joke calculator toy produced in 1976 by the Fingerbrain Company of Seattle, WA (USA). Pocket calculators were very much in vogue at the time.…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
A Valentine's spin on a desk organizer.
Print approx. €11.86–€14.50 excl. taxPreliminary estimate for one variant
This gracefully holds laminated 3x5 Kanban cards. Why? For situations where you need to accumulate X number of cards before taking action. One card per slot. I have included versions with two to ten slots. It works great with this…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
To replace a broken impellerto replace a broken impeller. Gaps of ≈ 1mm. the size has been changed, the outer diameter, the inner part has been removed.
Print approx. €6.14–€7.51 excl. taxPreliminary estimate for one variant
Made few for my friends, decided to share it.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Insuration for Akizuki-denshi size-B PCB.
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant
Insuration for Akizuki-denshi size-C PCB.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
oslona wentylatora 5015
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
The mount-plate works with a variety of switch-regulators (many of the boards share the same pcb size and mount holes, not guaranteed though). The images displays a LM2596 with a Noctua 40x40 fan mounted inside a mainboard cover for a…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
A pen holder with a slot for a graphing calculator. I embellished it with a pumpkin and a Pi letter on the front (Pumpkin Pi). Print in orange for a Halloween-themed desk organizer!
Print approx. €11.86–€14.50 excl. taxPreliminary estimate for one variant
The eau-rdinateur (water-computer in French) is a binary addition calculator that works using water. It uses taped siphons to implement the AND and XOR logic of a half adder. This was heavily inspired by this video:…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
This is a sprinkler range regulator 3D model This cylindrical component is usually made of durable plastic and incorporates an adjustable mechanism. It plays a pivotal role in managing the sprinkler system's range and coverage area. Ideal…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
potreboval jsem zakryt ventilator chlazeni a vse co jsem nasel nepasovalo.
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
adafruits voltage regulator/filter PCB enclosure with 4 pin Connector fitted Header, Vertical, 4 Way - Jst (japan Solderless Terminals) | CPC Connector Housing, 4 Way - Jst (japan Solderless Terminals) | CPC Crimp Terminal, XH, 28-22AWG -…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
This Gridfinity box is designed to hold the Texas Instruments TI-34 calculator horizontally so that it can fit in a drawer. It has a finger scoop to be able to easily remove the calculator from the box and is able to stack when empty.
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
Mateo touch kitchen faucet handle insulator. The insulator slides over the handle and prevents the touch function from working when the red handle is touched. I find it annoying to adjust the temperature or flow as the faucet often turns…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
This is a simple appliance that you stick on a standard broomstick (it fits the conical screw head of most European brooms). It allows you to manipulate theater lights and specifically barn doors attached to flood lights. I would…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for PETGSource material: PET
Adding the missing piece to this useful mobility kit. At your destination not only will you have a seat, but also a place for your cup, mug, or can, or bottle. This design will likely evolve with feedback and use. (image above from front…
Print approx. €5.63–€6.88 excl. taxPreliminary estimate for PETGSource material: PET
zwykły sam zrobiony
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Remix design for iCUE LINK ventilator. Added text and design elements.
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
dostal jsem filamenty zdarma díky Printables průšametrům. děkuju mockrát. tak byla snaha z toho něco vytisknout ** I got free filaments thanks to Printables. So I tried to print something out of it. Thank you very much
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
