Counting matching models…
A lockable contour gauge to copy/measure arbitrary shapes by pushing the blades against the desired shape and locking the gauge. The shape of the gauge can then e.g. be photographed and uploaded into a 3D CAD program. I used this for…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
a simple screw-like extending pillar, with a rotation locking slider for locking the height.
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for PETGSource material: PET
These are some storage racks to help organize DrFeelgood's Interlockable Sorting Cups. https://www.prusaprinters.org/prints/57542-interlockable-sorting-cups-now-with-lids/comments I drew up & posting both a rack for the short cups, & for…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Use case This screwdriver (bit holder) is made for fine to medium duty work. It is made to fit well into the palm of your hand, while still giving you a good grip for your fingers to apply some reasonable torque. Thanks to the clamping…
Use case: Once I had completed the slim 12mm lockable ball joint, I realized how super useful this kind of design is. While the lock is quite strong on the 12mm ball already, I figured there are probably use cases that require an even…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need 6 M3x25mm socket head fasteners, 2 Stainless…
Update - Slim variant added to models Model and Scaling I made this ball joint for one of my designs and decided to make a bare version of it that you can extend and adapt to your liking. You can also just take a look at the design and…
I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…
Lock-style knitting markers. Works well when printed in PLA. I recommend printing with 0.15 mm layer height, but 0.20 mm is probably OK too.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE January 1st 2024- Added 2 styles of internal trays.…
Application This GoPro (action camera) mount is made to fit to my generic lockable ball joint eco system, which can be found here: https://www.printables.com/model/370429-generic-lockable-ball-joint As the inner thread inside the GoPro…
Read more about the process here http://flashgamer.com/arduino/comments/making-a-good-cube Instructions This thing will print nicely on Makerbot's (only I've tested). The cube is really thin, just 1.25 mm but the lid stiffens the…
Lockable hinges for prusa enclosure. Print with paint on supports mainly for hinge part. Do not add supports to the magnet slot!!!! hinge locks used from here: https://www.printables.com/model/36286-lack-locking-hinges-knobs
Lockable container for bottles or other stuff you don't want to give (easy) access to. Locks used in picture are diary locks
Inspired by the INGCO 32-piece precision screwdriver set case . I designed it in Fusion 360 with help from Claude Code. This is iteration 59. Here's the first one :D And now look at the 59th iteration: Even with AI, modelling took longer…
Lockable container for bottles or other stuff you don't want to give (easy) access to. Locks used in picture are diary locks
This version of the label holder can be glued to the side of an already printed " Unlockable Loose Filament Spool ". It takes the same labels as the version with integrated label holder (look there for label size details). Print with…
This lockable latch combines functionality with a simple design, featuring a built-in mechanism for added security. Ideal for securing doors, cabinets, and other enclosures, both indoors and outdoors. Use durable, impact-resistant…
Read more about the process here http://flashgamer.com/arduino/comments/making-a-good-cube Instructions This thing will print nicely on Makerbot's (only I've tested). The cube is really thin, just 1.25 mm but the lid stiffens the…
Possibilities of use: Event entrance evidence VIP selection Warranty seal Many others purposes Animal label Attention, when you putting it on, it can damages the skin! Be careful! Use at your own risk. It takes a bit of skill to you be…
a simple screw-like extending pillar, with a rotation locking slider for locking the height.
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for PETGSource material: PET
Perfect for childproofing - Use a cable lock or zip tie to secure your cabinets and drawers! They are also perfect for low-mobility/dexterity people that have trouble grasping. Multiple sizes included
This is a lockable accessory drawer for Rivian vehicles. For it to locking portion to work, you need a PCB, it fits in without the PCB, but it won't lock For printing, I recommend PETG as it withstands the summer heat, PLA does not. The…
The original box from Jindřich Beneš only with the option of securing it with a lock to prevent unwanted opening
This is a lockable pencilcase using a spinning disc with a peice that runs through a track in the case. Assemble needs glue and a steady hand. Assemble in 4 easy steps: Take the cover, the disc and the circle. put the disc inside the hole…
Lockable box that holds together with a click system. The box is best printed with 0.2mm or less and is 41mm x 83.5mm x 30mm in size. It only needs support on the box itself on the sliding mechanism. It consists of 2 parts and I uploaded…
After printing Arklan's remix of the Open Ball V1 vise system, as well as Arklan's lockable lazy susan to accompany it, I found myself wanting to be able to integrate Squinn's Adjustable PCB Holder Tool into the system as well. Rather…
I did not like the original plexiglass extensions, as they were not integrated into the model. Therefore, I designed extensions with better-fitting plexiglass and hinges.
Summary This is a lockable cover for pocket knife, especially Suiss Army Knifes. I have designed the cover, becaus in my contry there are more and more areas, where it is forbitten to carry a knife which is not in a locked box or cover.…
This hook assembly is for the Bostitch N89C-1 Coil Nailer. Its designed in a way similar to the hook assembly Bostitch offers. Hook is sized to fit over 1.5" material For free-rotation, Download the “Friction-Rotation” hook. you can…
A remix of "Lockable Present Ornament" by jijimath. I wanted one that did not have the tick ribbons and could be made with a MMU. Category: Containers
When printing this model, make sure you print the top and the bottom at the same size. the top is made to be lockable, you have to push it and then turn it to lock it into place. There is a funny text in the bottom part to let you know…
I was asked to create a way to repurpose some old 92mm PC case fans as air circulators for a small indoor greenhouse setup. This frame can be mounted on walls, overhead, or on a shelf and locked in place with a print-in-place ball joint.…
If you’d like, you can join my group: https://www.printables.com/group/everything-about-3d-printing-with-friendly-contest-A5XAKWR/comments Some parts need to be glued. This is the assembly guide:
Lockable bench dog pins designed for ¼" bolts, with a selection of heads for clamping workpieces, templates or jigs to your workbench, MFT or workmate. All of the models are in the correct orientation for printing, and require no…
Required Material you need 6pcs of 6mm × 2mm magnets Assembly print press the magnets into their slots done Variations: you can adjust the magnet size in the FreeCAD spreadsheet
A simple, lockable box that prints in one piece. You can scale the box to the limits of your printing area. I would be very happy for any review or observation.
I ran the key through Netfabb and cut the key in half for easier printing. Cheers! Category: Containers
The tray made by Lerslens is now lockable. I added TPU cutouts to put at the bottom of the tray.
This is a name tag bracket to help organize DrFeelgood's Interlockable Sorting Cups. https://www.prusaprinters.org/prints/57542-interlockable-sorting-cups-now-with-lids/comments
This Is a recreation of the Imperial Binders (Handcuffs) from the Star Wars franchise. The original Model closes with magnets only, which is gret for some costume fun or to give to kids to play with, however I wanted a version that…
Lockable ballot box for votes, featuring the logo of the Queensland Teachers' Union and name. This design's use of this copyrighted logo was approved by General Secretary, Kate Ruttiman. We are a democratic union, and every member's voice…
Lockable Milwaukee M12 Battery Holder – For Upside-Down Mounting & Shaky Environments Keep your Milwaukee M12 batteries secure, even in harsh or mobile environments, with this lockable battery holder designed for professional use in work…
Made some holders to hold the amazon basic spice bottles at an angle. You can see and label them nicely. They can be interlocked and you can expand to as many as you need.
I loved the original design of this tool , though i found myself nervous while using it, especially if it has been greased well, that it might loosen accidentally. I have modelled on an external locking washer to prevent this from…
Filament Sample Spool These filament spools have fold-away pins to easily load an already wound filament sample by simply pushing it on from the side, then folding up the pins to hold it in place. This remix adds a label holder to keep…
I needed a practical and compact screwdriver to keep in my backpack, one that could hold multiple bits for various scenarios, so this one allows you to store several bits inside the screwdriver, giving you multiple screwdrivers in one.…
Since the most common upper Riser available here did not allow the printer to heat up, I created my own model. The printer can heat up to 50°C without any problems. Use ASA or PETG for printing. Sliders can be with PLA
This version of the label holder can be glued to the side of an already printed " Unlockable Loose Filament Spool ". It takes the same labels as the version with integrated label holder (look there for label size details). Print with…
Use a ~m5 nut on inside of the body, and an m5 bolt in the knob. The hole the bolt locks into needs drilling. At each lock position, hold it tight, and drill a 5-6mm hole just through the top layer. The bolt will screw into this and hold…
FR Support verrouillable pour marqueur acrylique POSCA Support jumelable en longueur ou en dos à dos STL: 1- Corps 2- Glissière verrou 3- Jumeleur 4- Bouchon 8- Support mural vissable ou magnétique Pas de vis pas de colle pour assembler…
As I am a woodworker too I had a need for a lockable bench-dog. In the past I made them from 20mm wooden rods but that was a lengthy job, mainly cleaning the lathe again, and they have the problem to be pretty loose with low humidity and…
Remix and extension of "Lockable Watch Maker Trays" with empty bins allowing to store remaining watchparts like the case and strap in the same stack. provided are 3 different heights: ~10mm (standard tray height) ~20mm ~30mm
This lockable latch combines functionality with a simple design, featuring a built-in mechanism for added security. Ideal for securing doors, cabinets, and other enclosures, both indoors and outdoors. Use durable, impact-resistant…
Lockable Oukitel RT3 PRO motorcycle holder. Designed for easy printing. Fits directly to Garmin AMPS mounting holes. You need this lock: DBS8 Winterhoff 6.5.2026, made some fixes to the models. Please redownload.
Assembly Position the ring between the two halfs and ball. Align the two halfs notches with the ring notch. The threads on the halfs form an arrow that must match the direction of the rings arrow Press until snap in and turn the ring…
Go ahead and use for all your standing ball joint needs, send your love the original creators way, this was by no means much work, the original designer did 99% of the work here. My photos here were printed with eSun PETG, on a core one…
UPDATE: improved lid with separate clip-in locking hooks - those were prone to break with the first one-piece lid if printed from PLA. Now they can be printed more precisely without supports (no bridges), are more stable and you don't…
The design is intended for applications where multiple carabiners are needed and aims for material minimisation. Originally designed as a shower curtain holder, I found it useful in other applications as well. For example I used it for…
TPU seal for this box: https://www.printables.com/model/1168970-sci-fi-box-lockable
I created the gate latch to incorporate into another Design that is still in work. I went ahead and posted the Gate Latch Assembly here as a stand-alone design. The gate latch assembly is lockable. The initial was designed using Fusion…
Info: remixed original frame 2 part, so it contains holes for M3 nuts assembly result is then more robust and tough no space between 2 frame parts also added eyelet so it can be hanged other original model parts can be reused
Put your old physical media racks to use again! This fully parametric drawer generator will generate drawers with user specified dimensions and compartments. It has been programmed to maximize strength while minimizing material and…
Put your old physical media racks to use again! This fully parametric drawer generator will generate drawers with user specified dimensions and compartments. It has been programmed to maximize strength while minimizing material and…
This is the standard GoPro quick release clip with a built-in locking mechanism -single print, no assembly needed. I have used James Rogers's model from GrabCAD.com ( https://grabcad.com/library/gopro-quick-release-mount-standard ). Print…
Choose your parts: Central section interlocks with stand legs of monitor and repeats curve of monitor screen. Model is modular and for full set you need: 1 middle shelf 2 middle cabinets (1 mirrored) 2 side cabinets (1 mirrored) 2 side…
This is a cover/protection for a blue 16A/230V 1 phase wall outlet (feeder). A 1/4 turn locks the cap. Fastening eyelet for a cord present, so that you do not lose the cap.
This is a low-cost 3D printable joint to be used for mounting assistive technology. The joint allows for 1/2 inch PVC pipes to be inserted in and allow movement in all degrees of freedom. This device is intended to work with other PAMS…
I liked the original model, but it had a flap that needed to be cut, I have fixed that. I have also added holes for M4 screws that can be used to create different add-ons to it. No supports needed! Do not recommend printing this out of…
For years i've had 12 gauge shotgun ammo but no suitable container to store them in, as i've gotten into clay pigeon shooting some of that ammo has a use but again no suitable container to transport them in. So i decided to design my own.…
When reloading ammunition one thing that i find is that i have no place to store my finished rounds, i'd usually reuse the original containers that the factory ammo came in but over time the cardboard falls apart and if the insert that…
This is a small box to house the moast precise and crutial part of your 3d printer, … wait for it !The NOZZLE! without this part of the printer this machine would not be able to work. So ive designed a box to protect those unused ones…
A treasure chest that can fit 40 switch games, 6 micro sd cards, and a big area for other items like bigger sd cards, usb stick or other adapters. I can even fit two joy cons side standing up.
This is a cable holder with a filament string hinge. Space for cables 50x22mm, total dimensions 75x30mm Use 3-4 mm diameter wood screws and I recomend drilling a 2mm diameter hole to screw them in easier
Despite the mechanism proposed by Decathlon, I was looking for an idea to create a support to secure the fixation of the 70cm pull-up bar from Decathlon. Decathlon uses a rotation pression system to lock the bar up between walls inside a…
Last Christmas, my brother gave me a package of No Mo' Skidz adult wipes. LIttle did he know that 3 months later, we would be facing The Great Toilet Paper Shortage of 2020. I designed this to provide comfort to those using our throne…
Small model for your keychain, replacement for 1 PLN coin for your cart. This may be screwed into place by one turn. LAST MINUTE Entry for Keychain Tools competition, some fine tuning may be required. Use high details settings ;)
A lockable, or latch-able bolt for your outdoor shed, gates, or doors. Suggest to paint the body and the small plate or cover it with UV protectant spray if this is to be used outdoors. Note, I printed it with polycarbonate for strength,…
I really loved the twist lock present but I thought it was a little easy to solve. I'm making a dozen of them and wanted to spice it up with a few different simple lock mechanisms. The tolerances should work out well I've printed them out…
Lockable Profile Gauge Easy assembly! Lockable profile gauge to trace the contour of an object. Print it at a resolution of 0,2 or 0,16, use an infill of 40 - 60 %. Print the elements x 30 times, slide these on to the body, follow with…
For english description please scroll down Komplett over-engineered Sägeschienenadapter für Makita Akkusäge DHS680. Mir war der originale Adapter mit ca. 40 € deutlich zu teuer und zu fummelig. Was du noch brauchst sind 5 Stück…
I created this remix to add a notch at the bottom of the rail so that locks on the straps can be used to hold the straps in place firmly Category: Toy & Game Accessories
An adjustable foot for 20x20mm aluminium extrusion. It works without the TPU ring, but it provides some vibration dampening and some more grip on smooth surfaces. The threaded part in the base piece can be clamped by an M4 grub screw…
Box to store PSP games with a closing mechanism. Can store more than 20 games. The hinge uses two pieces of filament 1.75mm and are inserted during the assembly.
Completely 3D-Printable Phone-Holder. Parts are designed in a way that you can vary the length and multiple Aspects of the construction. Some of the parts need to be printed multiple times. I recommend to use at least 45% Infill. This is…
Application This GoPro mount fits to my eco system of lockable ball joints, which can be found here: https://www.printables.com/model/370429-generic-lockable-ball-joint Take the ball pan and the union nut from the 18mm eco system folder,…
After I had completed optimizing my generic lockable ball joint ecosystem, I figured I should do an practical application for it to show how useful it can be. So I made this tripod, which follows a design principle that I had already…
Inside dimensions: 215 mm x 114 mm x 37 mm Outside dimensions: 221 mm x 120 mm x 40 mm Print settings: up: infill 30% supports: only on the table 0.20 layer down: infill 30% supports: only on the table 0.20 layer lock: infill 90% 0.20…
This model was designed to hold gold dipped roses from I Hate Steven Singer. As my wife pointed out, there is not enough roses to fill my design but there is room for a dozen roses. This box doubles as a gift box for Valentine's Day or…
Valentine lockable box for padlock, ideal with combination of Mechanical Heart Lock by P-atix. Without text. You can add your own text for example in PrusaSlicer. Ideal for small Valentine gifts, like jewelry etc :) <3 Use supports for…
My wife wants small boxes for her rings and ear rings. She wants them stackable for storage and yet can be separated individually with lids so that she can take one or a few out easily. So I designed and made these boxes. Instruction: -I…
![Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]](https://media.printables.com/media/prints/644202/images/5085947_ae90008e-8660-4752-9160-1b9f4a3444cc_1ea70f13-8190-4920-bd57-67c307f5b7f8/dscf8816.jpg)
