20,116 models
Remodelled version of Filament Dust Filter by sneakypoo . Almost identical to the original, but remodelled from scratch in Fusion 360 making it parametric so it's easy to tweak and sharing the F3D file so anyone can easily customize it.…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
iPad Halter in einem geschwungenen Design. Auf den Bildern ist der Halter mit einem 12.9 Zoll iPad Pro zu sehen. In der Mitte habe ich den Halter ausgenommen, damit mit dem Finger der Bildschirm nach oben gestreift werden kann. Der Halter…
Print approx. €9.23–€11.28 excl. taxPreliminary estimate for one variant
Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required
Print approx. €10.85–€13.26 excl. taxPreliminary estimate for PETGSource material: PET
Hier haben wir eine Wandhalterung für 18V Makita Akkus in der angewinkelten Version. Durch die angewinkelte Halterung lassen sich die Akkus angenehmer einlegen und entnehmen als bei den normalen geraden Versionen. Es sind Versionen für…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter. From the outside,…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
Set of keys to enable filters for camera lenses. 44mm - 52mm 55mm - 62mm 58mm - 67mm 62mm - 77mm 72mm - 82mm 77mm - 86mm 82mm - 95mm Print instructions STL: https://www.myminifactory.com/object/3d-print-lens-filter-wrench-set-52771
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
ein Moosstab der wie ein Mittelalter Turm aussieht
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…
Print approx. €3.51–€4.28 excl. taxPreliminary estimate for one variant
Easy to print, no support cave with window, for shrimps and small fish with window
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
drain pan to avoid the oil from filter messing up the engine front. the new version with an enlarged hose fitting an better coverage under filter's housing
Print approx. €9.15–€11.18 excl. taxPreliminary estimate for PETGSource material: PET
Threads into the filter for a secure seal so the filter can be removed from the tight space without spilling oil. Suits: 2013-2019 Dodge Ram Cummins Chrysler Part 5083285AA Oil Filter
Print approx. €2.55–€3.11 excl. taxPreliminary estimate for PETGSource material: PET
Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant
You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for PETGSource material: PET
Fensterhalterung für einen Mini Herrnhuter-Stern
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Verlängern Sie die Lebensdauer Ihres Dyson Filters mit Leichtigkeit! Unser speziell entworfenes Teil passt perfekt zu Ihrem Dyson und ermöglicht es Ihnen, den Filter mit Leichtigkeit und Effizienz zu reinigen. Einfach den Filter…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for one variant
Die drei Teile drucken und anschließend ineinanderclipsen. Dabei auf die richtige Ausrichtung (entsprechend der Fotos) achten. Bei Verwendung der 3.mf-Datei hat der Halter zusammengeklapppt Visitenkarten-Größe. Handy kann waagerecht oder…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Dieser Halter ist für eine Motorsäge, Heckenschere oder auch andere Geräte gedacht die hängend gelagert werden. Für eine gute Haltbarkeit sollte die Füllung mindestens 80% betragen. Viel Spaß beim drucken. Bitte geben Sie mir noch ein…
Print approx. €11.33–€13.85 excl. taxPreliminary estimate for one variant
ENGLISH Cigarette holder with activated carbon filter If you like it, leave a like please Length: 80.5mm Diameter: 13.6mm Version 1: Suitable for cigarettes with a diameter of 7.6mm to 8.5mm (v1) Version 2: holder cigarette v2 6,6-8,4mm…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Das Modell benötigt knappe 60g Material, präsentiert ihr Tablet in verschiedenen Winkeln und lässt sich mühlelos ohne (no) Supports drucken. Als infill habe ich 20% gewählt und mit einer 0,4 Nozzle auf 0,2er Schichtdicke gedruck.…
Print approx. €3.81–€4.66 excl. taxPreliminary estimate for one variant
V2 is now available. Stackable tea bag holder Dimensions: 6.8 cm wide, 8 cm deep, 10 cm high +++++++++++++++++++++++++++++++++ Stapelbarer Teebeutelhalter Maße: 6,8 cm breit, 8 tief cm, 10 cm hoch
Print approx. €2.37–€2.89 excl. taxPreliminary estimate for one variant
Update 12/18/23: I have found that using a square of shelf gripper, liner, foam under the cutter prevents the base from rotating. See third photo. Press firmly on the spindle with one hand while rotating the blades with the other. Cut two…
Print approx. €4.38–€5.35 excl. taxPreliminary estimate for PETGSource material: PET
Portafilter Funnel for espresso machines, comes in multiple sizes. Features: Tamp through Prevents waste (Spill over) Sits properly no magnets needed! Works well in combination with WDT tool Easy to clean Beautiful Print instructions…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Schichthöhe 0,2 mm Infill 10% Stützstruktur Organic Material PLA
Print approx. €8.83–€10.79 excl. taxPreliminary estimate for one variant
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for PETGSource material: PET
Ich habe für meinen BOSCH Accu-Staugsauger GAS 18V-1 nach einer Wandhalterung gesucht, aber leider nichts passendes gefunden. Somit mal schnell diese Entwurf gezeichnet. Ich wünsche euch viel Spaß beim Nachdruck und freue mich sehr über…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for PETGSource material: PET
I needed dustcovers for a noctua 140mm fan for the Lack enclosure for my ender 3 v2, so i made them the easy way. It has the standard hole size and spacing as per 140mm fan standard. The filter itself is made by infil, so set top and…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for PETGSource material: PET
Print Tested with PLA. Print instructions I recommend 15% to set the fill. Supports need to be generated on the printer bed.
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Prusa MK3S+ Druckblechhalterung, Prusa MK3S+ Steel plate holder
Print approx. €4.93–€6.02 excl. taxPreliminary estimate for one variant
DIN Rail Switch A small case with a switch that can be plugged on a DIN rail. The hole for the switch has a size of 18.7 mm x 12.4 mm. Two M3 Cylinder Head Screws with a length of 6-8 mm are required to connect the two parts (case and…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Bird fat balls are sold without net (yeah not rubish) - but you need a cage to offer them to the birds. I started to use the thingiverse model below, but had problems to print. So I constructed a new version - easier to land and print ;-)…
Print approx. €5.48–€6.69 excl. taxPreliminary estimate for one variant
Co-author: @JakubJoziewic_498185 VOCs (Volatile Organic Compounds) generated from 3D printing (especially ABS) are known to cause severe health issues. This model is an updated version of Nevermore Micro V4 Filter created for 3D printer…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for PETGSource material: PET
A print-in-place filament filter that hinges open/closed and has a slide locking mechanism. No supports 0.2mm layer height 0.4mm nozzle 15% infill PLA Designed for two 7mm thick foam pads that are cut to 15mm wide by 25mm long.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Halterung für handelsübliche Tuben wie z.b. Tomatenmark, Senf, Remoulade usw. zur platzsparenden/ sicheren Aufbewahrung im Kühlschrank oder Vorratsschrank Passend für 8 Tuben. Holder for standard tubes such as tomato paste, mustard,…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
Am besten ist es den Halter aus PETG zu drucken da dieses Filament die nötige Festigkeit hat und auch flexibel genug ist die Vibrationen zu verarbeiten.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Die montage an der rechten seite der X-Achse führt zu einem guten blick auf die Düse. Mounting on the right side of the X-axis results in a good view on the nozzle.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
The holder can be printed on the side very easily. I have printed it with support in the openings, but this certainly works without. In this case, printed with 15% infill. The stability is very good. Enjoy your next ice cream with friends…
Print approx. €6.30–€7.70 excl. taxPreliminary estimate for PETGSource material: PET
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
This basket replace the stock filter in chamber 2 of the fluval evo 13.5 reef aquarium. With the new rooting, the filtration si more efficent. Edit : Revison 2 to include thiker wall for printing easier
Print approx. €9.40–€11.49 excl. taxPreliminary estimate for PETGSource material: PET
A basic functional holder for #4 size conical coffee filters, such as those used by the Clever Dripper but should also be compatible with Melitta and other brands. This simple design is ideal for stashing in a cupboard and adds barely any…
Print approx. €7.53–€9.20 excl. taxPreliminary estimate for one variant
Aufbewahrungs Kontainer mit Wandhalterung, Stapelbar. Organisiere dein Alltag und bringe ordnung in dein Leben. Es werden zum Beispiel solche Schrauben benötigt: https://amzn.to/41Z0I4K --------------- ENGLISH -------------- Storage…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for PETGSource material: PET
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Print approx. €3.42–€4.19 excl. taxPreliminary estimate for one variant
Since I only have hozes with the "Gardena" couplers, I remixed the original design and added the coupler. I advise to print it with the 5 nozzles facing downwards and add a large (10-20mm) brim around it so it is kept fixated to the bed.…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for one variant
Schlauchhalter für Kaffevollautomat Jura E8
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Remix of the Hazard Triangle Holder for BMW I3 Trunk. https://www.thingiverse.com/thing:4671592 Things Changed: Optimized Screw Holes for longer Threads to fasten it Added a Hinge and a flap to secure the Hazard Triangle in the Holder…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
Tired of the smelly solder fumes floating around? This is the answer. A solder fume extractor with a powerful 140 mm fan. This solder fume extractor is designed to carry a big 140x140x25 mm fan. I used the powerful Noctua NF-A14 with 3000…
Print approx. €3.61–€4.42 excl. taxPreliminary estimate for PETGSource material: PET
Bithalter für die Akkuschrauber der Professional Serie für 4 Bits. Entworfen habe ich den Halter für meinen 18V-Schrauber des Typs “GSR 18-2-Li”. Sollte aber auch für andere Modelle und Marken passen wenn sie eine Aufnahme für…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Das ist eine Halterung für alle Swissphone s.QUAD Melder für den Nachttisch damit der Melder nicht herumliegt oder dauerhaft in der Ladestation steckt. This is a holder for all Swissphone s.QUAD pagers for the bedside table so that the…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant
Unterlegkeil mit Halter Halter kann mit M2-Senkkopfschrauben verschraubt werden.
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
UPDATE 2025-08-21 Based on some reviews and comments, I've revised the models and this time separated the models for the 7590 and 7590AX. I've moved the mount for the 7590 slightly. I removed the covers from my cabinet and my neighbor's…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant
Mount any 67mm camera lens filter to your iPhone. It's precisely measured to fit an iPhone 12 (Pro), without a case. I'm using it with a ND2-ND400 (9 Stops) Filter from K&F for filming. Advantages over commercial products I found: All…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Passt für Stangen mit 12mm
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
I felt that the chlorine pucks I put into the skimmer maybe disrupted the water flow so I designed this to be able to put the pucks on the side and still ensure a good flow. Should fit most standard skimmers, the measurements are: Height…
Print approx. €18.32–€22.39 excl. taxPreliminary estimate for PETGSource material: PET
The adapter installs into the main body of a Dyson™ Motorhead v7 vacuum cleaner and allows you to attach the HEPA final filter (instead of the standard motor cover). print in the orientation shown in the model files, with supports…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for PETGSource material: PET
Milchschlauchhalter für die Jura E8 holder for the milk tube of the Jura E8
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Sodastream Halter für Glasflaschen zum austrocknen. stabil / Standfestigkeit hoch / schlichtes Design Sodastream holder for glass bottles to dry out. stable / Stability high / simple design Print instructions Printer brand: Prusa Printer:…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
My mom recently gave me my Grandfather's 1950's Melitta 102 porcelain 3 hole coffee filter. I thought it would be a good test for my Revopoint POP 3D scanner. I was able to make an autosurface solid model from the point cloud, but I…
Print approx. €13.20–€16.14 excl. taxPreliminary estimate for PETGSource material: PET
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Ergänzung 11.01.2024 Habe eine Ausführung mit Aussparungen für den TAE und USB-Anschluss hinzugefügt. Diese habe ich nicht getestet. Bitte um Feedback, wenn es nicht passt!!!
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
Shadez are slide on filters that change the color of your lightbulb. Simply print Shadez in your favorite color of filament and insert it onto a standard A19 lightbulb. Shadez turns your light source to the color of your filament! Note:…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Wandhalterung Remote Fire TV Sprachfernbedienung Pro. Sie unterscheidet sich leider von der Form zur “normalen” Fernbedienung. Wert wurde auf abgerundete Kanten und tief sitzende Schrauben gelegt um ein verkratzen der Fernbedienung zu…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Version : 1.2. The connection holes on both parts are now increased from DIA 1.8 mm to 1.95 mm. It is reported several times as the holes were too tight. Version : 1.1. The connection holes on both parts are now hidden, when the lid is…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Sewing machine spool and bobbin clip V2 L with thread clip - Nähmaschinenspule und Spulenhalter V2 L mit Fadenhalter
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Ein einfacher Nimbus Sechskantschlüssel Halter für die Skadis wand
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
Ein Model zum Aufhängen der Stihl Motorsäge an der Wand Material: PLA Füllung: 15% (Gyroid) Schichtdicke: 0,2mm Getestet bei der Stihl MS 171, MS 241, MS 661
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
V2 - jetzt Online Wenn Sie auf der Suche nach einer modernen und praktischen Wandhalterung für Ihr Specialized Ladegerät SBC-C07 sind, dann ist die Halterung die perfekte Lösung für Sie. Die Wandhalterung bietet eine sichere und stabile…
Print approx. €24.11–€29.47 excl. taxPreliminary estimate for PETGSource material: PET
A simple box for Hario V60 paper coffee filters. The non-labeled STL is for the 02 size (bigger ones), the other one, as the filename suggests, is for the smaller 01s. Fits the whole 100 pcs pack plus some extra so that you can refill…
Print approx. €14.93–€18.24 excl. taxPreliminary estimate for one variant
Hallo, habe mir Daten auf meine Bedürfnisse angepasst, da meine Spülenrandbreite nicht dem eigentlichen Modell entspricht. Original auf Thingiverse gefunden: https://www.thingiverse.com/thing:1747492
Print approx. €3.52–€4.31 excl. taxPreliminary estimate for PETGSource material: PET
Pen Gyroid + Cubic with Holder Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini (with and without colorchange) Printfiles (G-Code) for MK3S and Mini (with and without colorchange) Simply insert the…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Das Problem Der Pumpenfilter deiner Hisense Waschmaschine sammelt regelmäßig Flusen, Münzen und Verschmutzungen. Beim Ablassen des Filters läuft das Wasser häufig unkontrolliert über den Boden – eine lästige und zeitaufwändige…
Print approx. €6.52–€7.97 excl. taxPreliminary estimate for one variant
Es wird ein Magnet benötigt, wie im Link oder ähnlich.…
Print approx. €2.11–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
Hier biete ich einen Wandhalter für Kabelbinder an. Die passenden Maße sind auf die jeweiligen Fächer geprägt. Außenmaße sind 250x166x44,2mm
Print approx. €19.12–€23.36 excl. taxPreliminary estimate for one variant
Macbook Halterung Die Macbook Halterung ist ein Nachbau der Twelve South Curve Ständer für MacBook. Diese habe ich angepasst, das sie auf einen Original Prusa 3D Drucker gedruckt werden kann.
Print approx. €10.91–€13.33 excl. taxPreliminary estimate for one variant
This honeycomb filter drops inside a spotlight to make the light more directional. The model has been designed for the Ikea NYMÅNE Ceiling Spotlight. Measure the size needed and scale the model to fit. The biggest tip I can give you is,…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Armoured Shelter This is a model I cut out the parts for around 10 years ago but never assembled. Then I got thinking, hey, why not build it in TinkerCad? Yeah! So that's what I did. Attached are two models. The main difference is one has…
Print approx. €10.65–€13.01 excl. taxPreliminary estimate for one variant
Wandhalterung für Verlängerungskabel oder Schlauch. Kurze und Lange Version. Wird ohne Support stehend gedruckt. Befestigungslöcher haben 6mm.
Print approx. €5.75–€7.03 excl. taxPreliminary estimate for PETGSource material: PET
Nähfuss-Halterung für BERNINA und SKADIS. Drei Versionen: - normal - grössere Füsse - normal mit extra Halter für den Fuss 3A. → Siehe Bilder *** Sewingmachine foot holder for BERNINA and SKADIS. Three versions: - normal - bigger feets -…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Der Halter passt optimal auf einen Kobra 2 max und man kann alles filmen TP-Link Tapo c210
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
As the fan I wanted to use with this wonderful HEPA + Carbon Filter originally designed by PrinterBox [ https://www.printer-box.com/hepa-carbon-filter ] does not fit fine, I've modified and enhanced this filter box. Tested with AVC…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for PETGSource material: PET
Filamet spoolholder X2 The filament spool holder X2 for Prusa MK3 can hold any 1kg standard spool (also the 2kg Prusament PLA Recycled) as well as with the 2 different extensions spools up to 4kg or a maximum spool diameter of 350mm. The…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Elegoo Air Purifier replacement filter box + stand for use with activated carbon Elegoo Air Purifier Austausch-Filterbox + Standfüße zur Verwendung mit Aktivkohle
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
The stock battery mount on the Happymodel Mobula 8 likes to break after some not-so-soft landings and snaps where the two crossbars connect to the side of the battery holder. This model replaces the crossbars and hooks into the sides of…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Mountainbiker, deren Bike mit versenkbarer Sattelstütze ausgerüstet ist, kennen das Problem, wohin mit dem Rücklicht? Viele Rücklichter sind dafür ausgelegt, am Sattelrohr befestigt zu werden, das schränkt natürlich die Handhabung der…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Drucke zuerst die Datei Advent_Test (1).gcode um zu sehen, ob die Kerze passt. Einstellungen: 0.4 Nozzle 10% Füllung (Gyroid) Keine Stützen notwendig
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
This Model is designed to be mounted on different surfaces with M4-screws. It also has a self-locking-mechanism.
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
You can use 3M 5911 P1R or better 3M P3 particle filters with the SUBEA snorkel mask found in Decathlon. It has a big valve to prevent moisturizing from breath the filters and bacteria deposition. The Air always flows in one direction,…
Print approx. €7.01–€8.57 excl. taxPreliminary estimate for one variant
Eine Halterung für das Verschrauben von Schildern oder anderen Dingen an einem Doppelstabmattenzaun.
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET
stapelbare Visitenkartenhalterung Ich hoffe ihr kommt bis zur 10. Etage und könnt mir dann über die Stabilität berichten. :) Die Füße können ebenfalls immer weiter gestapelt werden, jedoch würde ich empfehlen die Teile miteinander zu…
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant
Das Modell besteht aus zwei Teilen: Schlauch-Adapter , um einen 32mm Schlauch an den Wasserabfluss des Whirlpools zu hängen. Ablauf-Stutzen , der im Pool in den Ablauf gesteckt wird, damit der Pfropfen den Ablauf nicht verschließt und das…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
Design Description: Sink Drain Filter This design is a specially crafted sink drain filter aimed at enhancing the cleanliness and functionality of sink drains. Compared to traditional sink drains, it is more efficient and user-friendly.…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Ich wollte für meinen Kona Electric einen Einsatz für den oberen Becherhalter. Platz finden sollte der Schlüssel, Einkaufswagenchip, Ladekarte und Kleinkram In dieser Version passen bis zu 8 Standardkarten rein. In der “Blauen Version”…
Print approx. €5.75–€7.02 excl. taxPreliminary estimate for one variant
Here is an adapter for mounting the very popular miniature vice “Nano Vise 2.0” as well as the “Nano Chuck” by PRima (remix of mdkendalls “2.5 Inch Three Jaw Chuck” ) on the Revopoint Dual-Axis Turntable. The holder can be attached to the…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Dieser Halter wird an einer beliebigen Tasse eingehängt und kann neben einem Teebeutel auch Zucker, Kekse oder andere Dinge für das Servieren aufnehmen. Oder dann den benutzten Teebeutel aufnehmen. Der Halter steht auch stabil neben der…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Für meine LED Streifen habe ich eine Fernbedienung. Damit diese nicht irgendwo herum liegen habe ich mir eine Halterung konstruiert, inkl diversen Befestigungsmöglichkeiten. Die Halterung kann mit den beiden oberen Bohrungen direkt…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
Zum sicheren halten von Gläsern, Flaschen, Dosen etc. an Geländern. Für Geländer aus Quadratrohr mit 40x40mm. Mit Bohrungen im Boden, sodass sich kein Wasser, Dreck, Regen etc. sammeln kann. PETG mit 25% Infill sind ganz gut
Print approx. €15.77–€19.27 excl. taxPreliminary estimate for PETGSource material: PET
A filter shaping tool made specifically for your xBloom specialty coffee machine reusable dripper. Perfectly shape KWF-155 filters and precisely apply just enough water to make filters hold their new shape. Filters can be formed directly…
Print approx. €7.56–€9.24 excl. taxPreliminary estimate for one variant
![[Prusa] Box HEPA Filter Enhanced](https://media.printables.com/media/prints/59802/images/627044_4410bf3b-ba8a-4c22-96b9-6f6d801b440b/fusion360_qly6cpgcl1.png)
