Counting matching models…
Bolt 3 metric, star, thor, torx, nut, plain Bolt 3 metric, star, thor, torx, nut, plain. Lenght: 15mm Diameter: 3mm
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This model prints without supports, does not need a lot of infill (I think I used 10-15%) and works with the screws that come with the printer. You can use the extra M3x6mm Socket Head Screws that come with your 3d printer. (It is enough…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
Collection of screws (ISO 4762 / DIN 912) including : M3x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Collection of screws (ISO 4017 / DIN 933) including : M3x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: outer_diameter = 14 thread_step = .5…
Print Settings Layer Height: 0.2 Flat Top vs. Angled Top The flat top version has nicer lettering and is more neat, but one might prefer an angled top to avoid damaging wallpaper.
PCB standoffs. For best results use .05mm layer height for threads. this will give you 10 layers per thread and should result in good performance. Please let me know if you find them useful. 12 mm standoffs with M3x0.5 threads. 3-10-19 -…
Collection of screws (ISO 10642 / DIN 7991) including : M3x 5, 6, 8, 10, 12, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
Screw M3x25, thread pitch 0,5. Screw head - Allen. Printing without supports.
Bolt and nut M3 x 10mm Lenght: 10mm Diameter: 3mm
a M3X10 hex screw, you should print it with a 90% infill.
Its a fix for my K1, after it had extrusion issues. This simple fix solved the issues with extruder for me, hopefully helps you aswell. The extruder gears (the ones that pushes the filament) in K1 is attached to the chrome plated base…
This saves you a trip to a hardware store and few cents on the M3x25 screw ;) I really liked the design of the filament cutter, but it required two M3x25 screws which I did not have. These screws were also unavailable in the nearest…
M3x10 screw, needed for a model!! BE careful WHILE turning, or it will break!! warning!!!
I didnt find a good model of these inserts that I can use for reference when modeling, so I made my own. Since I am a VFX artist, I also included a .blend file with procedual shaders, in case you need it for photorealistic renderings.…
M3x25mm bolt hex very fine detail. would rather buy this size. M4 prints well
This is a remix of the filament cutter body published by Pomi. The design allows for the use of M3x20 screws. They due to being a bit shorter, it's a bit difficult putting it together. Make sure to check out the original for the cutter…
STEP file Remix from the original step file from respected @Henlor and his mod https://www.printables.com/model/615689-creality-k1-xy-belt-tensioners-upgrade. As mentioned in another remix - 20mm are more common.
This is a remix of the Bambu Lab X1C Clog Pusher Remix with PTFE tube. I reduzed the holes for the brass inserts to 4 mm to make them fit for the Ruthex M3x4 brass inserts I have laying around. I enlarged also the length of the hole to 5…
m3x42 screw, bolt m3, bolt m3.5 (print them with 0.2 nozzles, I only have 0.4 and it didn't come out very precise)
Customized version of https://www.thingiverse.com/thing:193647 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: type = bolt head_type = hex drive_type =…
The original screws were too tight, so I made a sleeve and hex cover to fit M3x25 screws. You will have to screw the bolts into the sleeve adapters. It shouldn't be difficult to do. The sleeves are then used in the original joint holes…
I needed an M3x16 Spacer for my Raspberry Pi PoE Shield. It's not much, but it mine :) Printed it in PCTG with a 0.4 nozzle and 0.2 layer height.
Printed with PETG filament, 0.4mm nozzle, 20% Grid Infill, 2 perimeters, 0.2mm layer height. Requires qty two (2) M3x10 flathead screws, qty two (2) 3030 M3 T-slot nuts, qty one (1) brass bristle ¼ inch pen wire brush with 1/8 inch shank.…
EBB36/NH36 mount with strain relief
60mm fan mount for Voron Switchwire with M3x5x4 Heatset inserts
Updated to use the Vorn spec 3/5/4 heatserts. 2.9mm plastic below to allow nyloc like anti vibration movement. Does have the 3d printed stepping for screw overhang as well. Added second model with holes to push the magnets, should you…
This works great with trutheframe's spool roller https://www.printables.com/model/278580-bambu-lab-spool-roller and guppyk's bearings Thingiverse: https://www.thingiverse.com/thing:4821342 If you want to use the Bambu Lab spool holder in…
A quick remix to use the nice adapter design for the Ender 5 Y axis linear rails, to mount it with M3x8 socket head hex.
Custom roll holder for using M3x10 screws and nuts. The screws and nuts are completely countersunk.
This is a remix, the original design can be found here . I have modified the model according to my wishes and additionally created a version which is printed in two parts and connected with two M3x25 screws, as well as a version which…
Easily mount your solid state drive or hard drive disk in your hard drive bay. These spacers work with any 2.5 or 3.5" hard drive. For use with M3x6mm Cap head screws. The spacers will work great if you print them with a .2mm layer…
Check original for print settings, assembly instructions and remaining parts.
A super quick print that allows you to put a M3x16 bolt into ¼" pegboard. It's great for mounting things that already have mounting keyholes on to pegboard. This thing is way stronger than it looks. The secret to this model is that as you…
Optional part for the Prusa Mini Fan Shroud . I sketched a sleeve for the M3x25 screw to acheive a better fit in the mounting hole of the fan. STL made with Onshape.
In the slicer it might tell you that the part is too small and it will ask you if you want to change it to mm or inches. If it does click yes. This will be the same for a lot of my 3D models.
Found that the Remix from @ReneDifferenz_299585 are a little bit to low for M3x6 screws and the head of the shcs arent deep enough into the Holder. So i remixed it.
If you want to make a sixth spool holder with the spare parts from the kit, you will need a different base. I have on my spare parts from the XL kit only one M3nEs nut over. And who the hell has an M5x85 screw at home? So I did an remix,…
This is a dual-deck version of the Playing Card Box by Markus_p, which is itself based on the Rugged Box (Parametric) by Whity. All credit for the original design goes to them. WHAT'S DIFFERENT - The outer box now fits two decks side by…
Simple spacer for M3 screw Height: 3mm Outside diameter: 5mm
Remix of a High Capacity disk adapter but using the normal voron inserts.
Remixed X idler tensioner for MK3 / MK3S X idler with tensioner so you can use a M3x12 hex socket cap head screw instead of the 16mm shaft.
voron 0.2 MiniSB_Motor_Plate with M3 Brass heatstake inserts - short M3x5x4
What is this I have used Chris_Hill s modified tension pulley for months now, there is nothing wrong with them but spotted a tiny potential for improvement. With a few small changes it could print better in another print orientation that…
It's version for M3x25mm screws. Additionally, you can upgrade the spool holder - the Spool Roller and the Self Centering Roller to it.
I've printed @Many24 's Swiss Key Holder 2.0 , however the smallest M3 brass insert I had, being the M3x4x5, was too large and I couldn't insert it properly. So I edited the model to fit this insert. I've only made a small modification,…
I used an M3 locknut in the middle instead of the designer's flanged nut. I made the side cutouts deeper. This lets you use M3x12mm on the sides instead of M3x14mm which is uncommon. I added M8 threads to the spacer. It fits very well. I
A very small (5mm diameter) washer cushion for an M3x10mm Hexagon socket head screw. I couldn't find one so I made it in TinkerCad. I need these washer cushions for my Creality Ender 3 XE-Axis Assembly. There are two versions: 5mm outer…
This remix uses M3x20 screws
This is a modification to the part "Parametric Lightweight MasterSpool" so it supports M3 bolts. The source works fine with M4 bolts but creates thin walls for M3 bolts. The M3x30mm STL files will work with M3x30 and M3x35mm bolts The nut…
Neu gezeichnet nur für M3x30 mit Innensechskant und M3 Einschmelzmutter für einen höhere Festigkeit.
This is a 2mm thick case that I designed, I printed it with PLA with tree supports on the Bambu P1S, but you may have to adjust the scale a little bit for tolerance. I have included the scale that I have used for my print. Glass Screen…
I made a large cutout to comply with the gap from the rail to the extrusion, suggested from the Voron 2.4 manual. I also made a recess to sit a m3x6 BHCS screw into it, so more thread is exposed under the cover. I tried to make a pull…
Modified for M3x8 socket head cap screws and M3x4 heatset inserts.
Similar to my "split radial ball bearing 4-40 x 3/8" but with metric screws, this ball bearing is designed in 4 sections so it could be printed with the raceway of each section facing up for a smooth surface. The ball bearings are…
Small variation on one of the parts of great PEEVES' model.
Asociated screw model https://www.mcmaster.com/92125A128 Tested print conditions: 0.40 mm nozzle 0.10 mm layer height ABS material Attached files png screenshot, 3mf, step, f3d The main purpose of this simple file is to test the…
I had difficulty with the original model (the M6 bolt broke while installing), so I ended up creating adapters to make it work. After using it for some time, I decided to make a proper remix and make a few other adjustments to print from…
2mm spacer to fit a M3x6 screw
This is a replacement spacer for the aluminium one. Just print it and drill it, then use a "metal sheet screw" to fasten it. Print Settings Printer: prusa i3 rework 1.5 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: spectrum…
This can be used in CAD as a tool body to cut out a pocket hole for an M3x30 socket head cap screw and M3 nut. Place the model so that the thin shaft crosses the cut you want to fasten, the vertical shaft gives access to drop in the nut,…
deeper holes for the standard m3x16 screw from the original Leg's
I needed some m3x30 smooth dowels for a project and couldn't find any that i liked so i made my own. It's crude but it works with the rugged mtg boxes on here.
These are feet to raise the printer, they are fixed to the bottom with two M3x20 screws and two T-Nuts per foot. M3 T-Nuts or just normal M3 nuts with a printed adapter can be used.
Hi, This is motor mount for Mini Talon FPV Plane. M3 nuts are placed inside the print, maximum thickness of nut is 3mm. I used 2,3mm thick nuts, which worked fine on this project. You can use 10mm dummy on opposite corner of printing area…
This is an enclosure for cheap tracking devices commonly sold as "LocaTag" with a 36 mm circular design. The enclosure mounts to rear lights on bicycle racks that have a 50 mm bolt spacing with 5 mm bolts. The cap is secured with a M3 x…
Angepasst an die Firewall / Router von Watchguard - XTM3x und XTM2x Drucke es auch gerne aus ... einfacher unter https://www.3dhubs.com/service/182243 ordern Category: Computer
Print solid with no supports. I used a soldering iron to press the M3 nuts into the retaining holes. Screw size is M3x6mm. Print is for left (driver's) side. Mirror along y axis to for other side.
Remixed to better fit m3x6 screws that I had on hand (mounting this to the extruder). Also changed the nut holes to be press fit. I don't use this with a BL Touch, but it works great even without it. The fan is mounted to this plate with…
This is a remix of the popular BentoBox v2.0 carbon filter system.
This is a remix of the excellent Wallie - Advanced Lever Action Wallet by SMACKMAX Changes made: • M3 heat-set inserts (OD 4.2 mm × 3 mm) used on every screw except the top tension screw • The top tension screw uses the same M3×8 — push…
A simple heatbed knob for M3 wingnuts. It is 40mm in diameter. The wingnut knobs for heatbeds I have found are pretty small, so I made a bigger one.
While doing some maintenance on my Ender, I somehow lost the extruder head cover. And the fans. Luckily I had a spare fan, but none of the prescribed hardware for the original. Changed the main bracket to take a M3x8 bolt instead of M3x6,…
Custom roll holder for using M3x10 screws and nuts. The screws and nuts are completely countersunk.
A simple heatbed knob for M3 wingnuts. It is 40mm in diameter. The wingnut knobs for heatbeds I have found are pretty small, so I made a bigger one.
Original Description: Introducing my latest 3D printing enhancement—a custom-designed direct drive mount for my 3D printer! This meticulously crafted mount seamlessly integrates into my setup, bringing unparalleled precision and…
What is this I have used Chris_Hill s modified tension pulley for months now, there is nothing wrong with them but spotted a tiny potential for improvement. With a few small changes it could print better in another print orientation that…
deeper holes for the standard m3x16 screw from the original Leg's
Collection of screws (ISO 10642 / DIN 7991) including : M3x 5, 6, 8, 10, 12, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
A compact and durable bolt with M3x0.5, M4x0,7 metric thread, available in lengths from 5 to 30 mm (6 to 40). Features an internal hex socket (Hex Key) for secure installation using a standard 2.5 (3mm) mm hex key. Ideal for precise…
Original Description: Introducing my latest 3D printing enhancement—a custom-designed direct drive mount for my 3D printer! This meticulously crafted mount seamlessly integrates into my setup, bringing unparalleled precision and…
