249 models
BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, I have been disappointed with the performance, cost, and size of cheap morse code paddles. So, I designed my own. For portable ops, or to…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
BACKGROUND: After designing a super simple iambic paddle for portable ops , I had multiple requests for a single lever version. So, here it is. I added a small snap-on cover to the design, but it's not entirely necessary. The hole in the…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, and an SKCC member, I wanted a fun little straight key to fit in the smallest possible kit. So I made one… For portable ops, or to mount it…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, and an SKCC member, I wanted a fun little straight key to fit in the smallest possible kit. So I made one… then I modified it for better…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
Morse Taper 2 (MK2/MT2) x 1 drill bit holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. The tool holder module couples with the attachment plate module, print one of each and you have what you need to hang…
Print approx. €8.02–€9.80 excl. taxPreliminary estimate for one variant
Morse Taper 3 (MK3/MT3) x 2 drill bit holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from build plate only. The tool holder module couples with…
Print approx. €3.98–€4.86 excl. taxPreliminary estimate for one variant
Morse Taper 3 (MK3/MT3) x 1 drill bit/tool holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from base plate only. The tool holder module couples…
Print approx. €7.26–€8.87 excl. taxPreliminary estimate for one variant
Beschreibung und Bauinformationen folgen in Kürze.
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Morse Taper 4 (MK4/MT4) x 1 drill bit/tool holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from base plate only. The tool holder module couples…
Print approx. €7.61–€9.30 excl. taxPreliminary estimate for one variant
This is a remix of the Iambic Paddle designed by Adam Kimmerly (K6ARK). I really liked his design an thought it would pair well with the ultra portable Elecraft KX2 HF Transceiver. I also wanted to help put out a design that lowers the…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
One of the finest portable CW paddles you can buy is from Modern Morse . Aaron has made a truly fantastic morse code tool, handmade and designed in the US. Get one, you won't regret it. Then, consider swapping out the finger pieces with…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
This is a micro-clipboard sized to a field notes book with a K6ARK paddle mount integrated on the underside. It is designed to allow you to have a firm surface to hold the field notes book while logging as well an easy method to “hold”…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for PETGSource material: PET
This is a case that houses the N6ARA Morse Code Paddle (The plug model) and the adjuster that comes with it. The clearances are so that both the key and the adjuster should hold in place with friction. You will most like need to do a…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
Destička pro zápis morseovy abecedy. Board for writing Morse alphabet.
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
This is a leg strap mount for the CWMorse Pocket Paddle: https://cwmorse.us/products/blue-yellow-pocket-double-paddle-morse-code-key CWMorse sells a leg strap mount for their Pocket Paddles, but I wanted one that would work with the…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
This is a case for the Morse Monkey which is available as a kit at https://grapevineamateurradio.com/products/morse-monkey-cw-training-kit?variant=42239757779123 I used PETG and only the switch requires supports. Enjoy!
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a way to hold down my keyer, especially since this AME key has exposed parts that make it difficult to support with the other hand. The base allows a passthrough for the cable or installation of an audio jack, and then can be…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
EN ( FR plus bas) 3 clamping jaws Small and Medium can be reinforced with M4x35 mm screws A 10x2 mm circular magnet slot is provided on all three models for storage on the workbench leg when not in use. 3 .step files available 3 .stl…
Print approx. €6.88–€8.40 excl. taxPreliminary estimate for one variant
Mors d'étau simple adaptable Dessin parametrique, dimensions modifiables. Aucune connaissance de freecad necessaire, il suffit de changer les valeurs des cases vertes dans le tableur du fichier fourni. Entrer les dimensions sous la forme…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
This is an articulated model I sculpted of the creature from The Elder Scrolls Online, Tremorscale. A duneripper boss from one of the dungeons in the game (Volenfell). Support me on Ko-Fi! https://ko-fi.com/zunasw Printed on an Ender 3…
Template for morse code letters
This is my take on an Iambic Paddle for CW (Morse Code) Operation. It takes inspiration from the CWMorse Pocket Paddles but is smaller and can be made at home! I Recommend printing this in PETG for durability, but you can print this in…
Double U-type Pipe Clamp - Morsetto per tubi a doppia U - Metric/Imperial For fast installation of RNC, flexible & rigid conduit Easy to print, optimized filament usage Sizes available: Metric Ø 7mm Ø 16mm Ø 20mm Ø 25mm Ø 32mm Ø 8/20mm…
Template for typing Morse code. Resolution: 0.16 mm Infill: any 29. 05. 2024 Added new stl model: Morse code template with slashes behind each sing Added a slash to separate individual letters of the morse code
Love your K6ARK morse code paddle, but want more mounting options? Look no further. Simply print one of these three 3d printed plates to suit your needs; the angled ones for a right or left leg strap, or the straight one for a desk mount…
The paddles I've created differ slightly from the design that I Remixed. These paddles use bearings for less friction, and the return tension is created with magnets instead of a spring. I have uploaded a PDF with step by step…
I did not found a good morse code lookup table to be printed, so I made my own as a multi color print. Morse code is a method used in telecommunication to encode text characters as standardized sequences of two different signal durations,…
Witam, do pobrania mojego pomysłu i projektu odpieniacz białek do akwarium morskiego, odpieniacz przeznaczony do pracy z pompą Jebao DC 3000 lub 4000, mogą pasować inne pompy trzeba sprawdzić. Film z Budowy: Odpieniacz na rurze plexi…
Morse Code Key created in OpenSCAD using magnets instead of the spring for the return. BOM: M3x5mm Screw M3x8mm Screw M3x10mm Screw M3x25mm Screw M3 Locknut 2xM3 Nut 3x M3 Washer 2x 623 Bearings 2x 8mmx2.75mm Magnet 3.5mm Panel Mount Jack…
Here's Morse from Party Animals. My second ever sculpture/model. Might not be 100% accurate but I did my best! You have one furry model and one smooth. You can check on my profile if you want other animals (coming) from the game. Enjoy!…
Template for morse code numbers
è suggerito l'utilizzo di feltrini adesivi per non graffiare il banco da lavoro o la scrivania. al primo assemblaggio forzare leggermente le viti nei fori e avvitare/svitare più volte per rendere lo strumento più scorrevole; fare lo…
For nozzle 0.4 resize to 175 percent minimal. Cut the file into half in Z. After print glue it. UPDATE: Corrected Q in receive side, thx to Adre_. Print instructions Category: 3D Printing Summary For nozzle 0.4 resize to 175 percent…
This is my take on a compact Morse Code sideswiper key, (also called cootie keys.) Unlike the traditional telegraph key which uses an up-and-down motion, the sideswiper makes contact on either side of a flexible arm, making for much less…
Small tool holder that's great for holding tools for a benchtop lathe, mill, or drill press. 6 holes sized for MT2, one of the most common taper sizes. Also has smaller holes between the MT2 holes for smaller tools (chuck key, tightening…
I printed this in PETG-CF, for strength and a nice texture. See the photos for recommended supports. It's printed angled to maintain strength and to keep a consistent surface finish. I can provide customized versions of this model for…
Hi made tis model of at MT2 cleaner for lathe spinels etc. printed super flawless standing on the flat end.
Printed in petg at 0.2 mm layer height, two parts are held together using m4*16 bolts and M4 nuts, the base is attached to the wall board using suitable M3 screws. Nuts are inserted in the wall bracket at 8.8mm using a filament colour…
Vee block with clamp, clamping Knob M8 Threaded Stud - Prisma Officina con Morsetto e Manopola di serraggio M8 This Precision V-Block Clamp Set is designed for checking precision machine parts, general workshop use, and holding stock when…
Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…
Great design for a 3D paddle with just a few modifications including: Added side walls to the base to prevent accidental keying Rounded the base bottom for a better feel Added screw holes to bottom to facilitate additional stuff Created a…
The first model in the "modular Arduino portable workstation" series, abbreviated as ARMORS. The distinctive features of the series are: modularity, easy assembly without the use of screws and glue, minimum tools, only a hammer,…
Mar 7 2018: Added an STL file to print two small wrenches to assist adjustment of the contacts. See photos. This is my take on a Morse Code sideswiper key, (also called cootie keys.) Unlike the traditional telegraph key which uses an…
My original post https://makerworld.com/en/models/579172#profileId-500029 First Single Lever CW Paddle Prin in place. Ultra portable, lightweight 12/14grams, and efficient design for QRP and portable CW operating! You just need 3 screws…
Use the FCStd files if you wish to change the models in FreeCAD, and use FreeCAD 1.1 or later. Use the STEP files if you wish to change the models in some other CAD. Use the STEP or STL files to print as-is. The STEP files may need to be…
I played around with Adam's original files and ended up with a solution with magnets and an ordinary hinge instead of the integrated hinge and a dove tail that allows for attaching the paddle to the housing of the (tr)uSDX. The…
This is a rework from: https://www.thingiverse.com/thing:6569884 Changed: Spring → magnets Hidden cables for aesthetic purposes Modified the inside base to facilitate weight loading to the base Added 3.5mm jack Added a magnet cover for…
This model is a handy little tool that is perfect for your Altoids Tin, your wallet, or just your pocket. At just 1 mm this model is roughly the size of a credit card. I used a color swap for layer four so that the letters stand out on…
The AME morse code paddles are meant to be mounted to a base using the three screws supplied with the unit. However, the unit is small enough that it is perfect for field use in ham radio SOTA (Summits on the Air) and POTA (Parks on the…
Wall MT2 holder Note: This was save in the inch format by mistake so scale it to mm. I can't find the drawing file I did. Cheers Kisssys Category: Machine Tools
Parts Bearing: MR117ZZ x 4 Magnet: 5x1mm Neodymium magnet x 6 Screw: M3x10mm x 20 Flat head tapping: 3x8mm x 4 Wire: 0.2mm Mag Print finger_piece x 2 spacer x 2 selece side_hole_frame or back_hole_frame x1 other x 1
I love the original Morse Code Paddle / CW Key that K6ARK made. I was trying to get the contact distances closer but had trouble with the pressure from my plastic springs not being enough. With magnetic returns I was able to get the…
This is a case for the Morserino. I have included a support wedge to prevent the paddles from moving.
Parametric Morse Taper Adapter Sleeve MT3 to MT2: MTA_AdapterSleeve_3_2.stl MT4 to MT2: MTA_AdapterSleeve_4_2.stl MT4 to MT3: MTA_AdapterSleeve_4_3.stl MT5 to MT2: MTA_AdapterSleeve_5_2.stl MT5 to MT3: MTA_AdapterSleeve_5_3.stl MT5 to…
This is a simple, minimal hardware, side swiper Morse code key. Otherwise known as a "cootie" key. NOTE: You will want to print the arm on a raft to prevent the leaf spring parts from warping off the bed. This design only needs five…
Let's see if this model is correct or not! 3d print it to have a (not working) model of the next iPhone before anyone else does! Follow me and use my other models, more coming soon! I will upload more dummy models of phones soon, so stay…
A VPP straight Morse key - the knob follows the native trajectory of the wrist. Concept Demo: Build video: https://youtu.be/miGSeoow_kU Printed parts STLs are in print orientation, except the tower: the STL stands on its tongues, the 3mf…
As we could not find a morse taper holder suitable for our needs we designed these interlocking drill racks : Morse taper 1 - 22 positions Morse taper 2 - 16 positions Morse taper 3 - 6 positions Morse taper 4 - 4 positions We printed…
This is version 2.1 of my wrist mounted paddles. Embedded magnets allow for flexible mounting options. It's a minimal hardware design, requiring just a few screws, a stereo jack, and magnets. All parts are listed with links in the…
The Morserino32 is an amazing project and the device has plenty of features. But it's too large to fit in my pocket. Hence I've created a new and smaller PCB for the new heltec v3 lora module (Morserino32 uses the v2 one which is end of…
SteadyArc is a 3D-printable putting aid designed to help golfers dealing with Essential Tremor, Parkinson's disease, or other hand tremors maintain a steadier putting stroke during recreational play. For many golfers with tremors, the…
This is a holder designed for Morse Taper 4 tooling. I use this to store tooling on my lathe's back splash shelf. It is secured using recessed 10-24 cap screws. You will need a 1-½" hole saw for the pilot hole. I print these with ABS,…
Simple morse key with inside a simple circuit based on NE555 oscillator that pop out the sound. 📖 You can find all the instructions and explenation about how it works here:…
Small protective case for your Modern Morse Nameless CW Key. Throw it in your pack without worrying about scratching the key, or anything else. Inspired by similar cases I saw for the BaMaKey TP-III. FreeCAD file is included if you want…
Adjust layers for contrast on the front panel lettering. Kit is available from https://grapevineamateurradio.com/products/morse-monkey-cw-training-kit
More details can be found at https://holdmybeer.io/2023/07/02/magnetic-cradle-for-n0sa-sp4-morse-key/
Note: I've left this model online in case anyone needs spare parts. I have redesigned these. Version 2 can be found here: https://www.printables.com/model/1525157-version-2-of-my-pico-paddles-for-morse-code-includ Micro paddles for SOTA,…
Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Подходит для Токарного станка WM210, закручивается винтом для…
Soft Jaws for Vice - Jaws Protector - Vice snap on cover - Guancetta per morsa 145mm Use mirror Tool for the Left - Funzione specchio per il sinistro Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
This project utilizes an Arduino Pro Mini to create a custom Morse code keyboard interface. The system uses a single button to generate keyboard inputs for dots ( [ ) and dashes ( ] ), allowing for Morse code input via straight key or…
I have uploaded a PDF with step by step instructions. I will create an assembly video in the future and upload it to my YouTube Channel. http://youtube.com/@w1rcp # Per Assy Short Description 2 Magnets 6mm x 2mm 4 M3x8 screw 2 M3x12 screw…
If the K6ARK paddle had enough real estate to add a hex key, it would totally be there. Oh, trust me, I tried. This remix adds a storage location in the strap base print for the 1.5mm hex key used for adjustment on the grub screws for…
My Kent Double Paddle had a habit of sliding around the desk on the existing rubber feet. Also I didn't like the give in the rubber feet. So I designed this plate so that there is a flat surface on the bottom of the key. It attaches with…
I purchased a Modern Morse Nameless key from @aaronmakeskeys on Instagram and it's a spectacular key. It came with a foam-lined metal tin case for it, but it was rather large. I like to operate CW portably, so size and weight are factors,…
I was interested in a straight key for portable ham radio operations with a magnetic return feature. The Putikeeg MCT04 fit the bill in terms of size, quality, price, and features. This key more commonly goes by the name, “Classical Morse…
Case to store the CW Morse SP4/N0SA paddle for protection and can also be used to protect the paddle from accidentally sending dits/dahs by touching the adjustment screws while sending CW. Use Velcro to hold the paddle in place in the…
UPDATE: Posted v2 models which leverage 12mmx2mm and 6mmx2mm magnets due to better availability of those sizes per a request from a user. The v1 models are the original models as discussed below. This case holds the key snugly in place,…
50 x 50 mm chip that shows a diagram that allows for easy decoding of morse signals. Made because of this reddit post I live abroad atm so i have never printed this, if anyone could test it for me I can refine the design. I also have the…
I didn't have any of the components listed in the BOM and I really just needed something to tinker with on the breadboard while developing my bluetooth controller/keyer for morse mania. I kept running into issues with the screws shearing…
The Quangsheng UV-K5 is a popular HT, mainly due to its ability to be modded. One of the popular mods done on this radio is to change the firmware so that it can do CW (morse code) on 2 meters. Popularized by Forrest (KI7QCF), you can…
Protect your key and take your adjustment hex keys with you. I printed mine using PETG to withstand the heat of the south. You can modify the STL in your favorite sliver to have your callsign embossed -1.5mm into the top.
I designed a PCB to make the vail adapter github project a bit easier to assemble and use. THIS CASE IS FOR THE OLD V1 PCB. THE CURRENT PCB ON GITHUB IS V2, CASE FOR THAT COMING SOON! If you are interested in buying pcbs, or all the parts…
Modelo de dimensiones inferiores a 256x256. 0,2 mm altura de capa Sin soportes 3 walls PLA+
The model is design for an ever so slight friction fit of the key into the case. I also added some spots to store your adjustment and disassembly wrenches, also friction fit. I did all prototyping and final printing with PLA, so your…
UPDATE 27 December 2022: Added a file with spaces for two 12 x 3mm magnets to secure the base to a radio. This is a base for a Soviet-era mini Morse code key. The base of the key has a trapezoidal plate to fit into a radio or a knee…
I cannot believe anyone else will every want this but you never know. The ceramic handle for the handle to open my wood burning stove broke so I knocked up a new one in 123D Design, I'm not convinced that orange is the right colour but…
Simple base you can bolt to a WWII Flameproof ARMY J-5-A Morse Key to keep it from tipping over. I used three 20mm long x 3mm flat head screws and three nuts to secure the key to this base. I printed mine out of black Voxel PLA+ on my…
This is an add on magnetic base for a CW Morse Series 37 Dual Paddle morse key. For the construction you will need: 4 x m3 nuts 4 x 15mm m3 screws / bolts 4 x 10mm dia x 1.5mm thick N35 Neodymium magnets. A dab of superglue or similar to…
MORSETTO SUPPORTO PER PANNELLO SOLARE LUCI. DA INSTALLATO SU PALO GAZEBO
This is a low-cost and easy-to-program device that allows users with motor disabilities to use Morse code in order to type on a computer or mobile device. The built uses the Microbit's Bluetooth capabilities to send keystrokes to the…
Holders were generated with conicity 0.05 from this SCAD: https://www.printables.com/model/1030467-parametric-holder-to-print-on-side
Wanted something robust, so I dove into FreeCAD in a serious way for the first time. Still struggling with it, but here's the result. The magnetic return is adjustable, as is the back height and the “striking” bit. I measured the return…
Supporto per Morsetti o altri accessori per parete attrezzata Honeycomb Storage Wall HWS . Questo Supporto ha una lunghezza utile di 95mm ed altezza di 15mm e consente di trattenere fino 5/6 morsetti da 60mm (altezza) Per essere applicato…
Some parts might need supports, like the travel case. The rest should not depending on bridging settings. Uses a standard 3.5mm aux female jack and mechanical keyboard switches. Feel free to message me at [email protected] if you…
After some troubleshooting with size and detail, I've devised this set (alphabet only ATM) of telegraph keycaps which have replaced the letters with international Morse code symbols. J and F keys (for QWERTY setups) do not have home…
Can be used e.g. with the touch pins of an ESP32. Use 15x1mm brass punching blanks. After soldering the wire they're pressed into the recess (works great with a bench wise). Mounting holes fit m3 screws.
"The night assists me and it’s endless here." –The Ghost Face Category: 3D Printing
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas mořskou vilu do vany. Pokud chcete dite znacne vydesit, je tenhle model idealni pro Vas :-D :-D :-D Pro kontakt pro…
![[WIP] Morse Coder](https://media.printables.com/media/prints/299a304d-82ac-4b29-ac5d-286b56b1f60e/images/12569822_44ef741c-f519-482e-b34d-1d2a0414d670_97bb1b63-5a20-4fd1-9ee0-7085749d6462/decode-unified.jpg)
