Counting matching models…
Replace the Wheel in Magic remotes from LG which are prone to break in the original. Although the model has intricate details, for me it worked better when printed on a FDM printer than with resin (I tried both). The reason is, my resin…
Search the web, and could not find a functional bearing with this dimensions. So I create one in a simple way and for fast print. The bearing has no rolls inside. The inner ring has a tap, so it could not fall out. I printed the bearing…
Replacement knob for Makita DMR106. Not sure but might fit to other similar radio models as well.
MR128, MR62 and MR52 bearings.
I'm a happy owner of the Drop BMR1 Nearfield desktop speakers (even though it is a bit of a Kickstarter-like experience and not everyone is happy - but then, it's nearly impossible to make everyone happy anyway). They did have an optional…
Took the grille insert that @mbarvo made and turned it into two parts to make it easy to change the pattern of the grille to the infill select. You'll want to go to the original…
Mount for the Netgear MR1100
This is a 45-degree offset feed neck to replace the clear plastic one that comes with the Spyder MR1 paintball gun. It's designed to use the old bolts and nuts, but if you don't have those, you can use 8-32 machine screws and nuts…
I didn't like the mounts that came with the Drop speakers, so I made my own. My monitor has a compound curve, which is why the face is tilted. Feel free to modify the scad to make your own! You can also just steal the bolt pattern for…
Side attachments for Midas MR18 and Behringer XR18 Air Mixers to protect the device body from scratches and possible liquid spills on the ground. Adds 10mm space from all sides. Print one piece for each side, which requires four M4 x 10mm…
The Netgear MR 1100 hotspot gets hot very easily, and shuts down. This Cooling case is designed to keep it cool even when under heavy load. A small 40mm noctua fan is attached to the bottom of the case and is powered by the USB A output…
I've got a few landscape spotlights that produce an annoying glare when walking by them. Searching a bit, I found the solution to the problem was to place a louver (or louvre) between the bulb and the lens of the spotlight housing. Many…
MR115 Printable Bearing. Print it slow, add a brim for stability, 0.2mm layer height after printing, you might need to loose it up if you tolerances are not superb. Give it some oil, i use WD-40, and it spins fairly ok of a printed bearing.
Most of the strength is going to come from the wall thickness rather then the infill. You can keep the part lighter by increase walls and decreasing the infill. Mine is printed in Prusament PC with 4 walls top/bottom/sides and 15% infill…
Lampenschirm für GU10 und MR16 LED Leuchtmittel Einfache und praktische Lampenschirme für die meisten GU10 und MR16 LED Leuchtmittel. ____________ Lampshade for GU10 and MR16 LED bulbs Simple and practical lamp shades for most GU10 and…
As original designer @tedder_1424 suggested [thanks!] I stole the mounting panel geometry from the original design and replaced the rest with a narrow angled strip (about 0.6 x 7.75 in). If my CAD skills were stronger I would've tried…
This is an adaptor ring which I created to mount MR16 LED lights into an luminaire which would normally use AR111 lights. I my case I wanted to fit specific tunable-white LED spots from ConstaLED into an “Ronka” luminaire from Arcchio. I…
A simple light enhousing which I designed in OpenSCAD for all those MR16 LED spots I had lying around from previous bike lights. I printed them in PETG with 100% Infill. Time will tell how well they will last if exposed to the element.…
It’s a remix of the SMLight SLZB-06 wall mount, redesigned for use with the Multiboard system via Multipoint . It's compatible with the SLZB-06 series (with Ethernet) and SLZB-MR1 (multi-radio) adapters. For mounting onto Multiboard, I…
About model Optimised and prolonged inner handle for Mitsubishi Delica's sliding doors. Made for a friend's offroadsafari.cz orange Delica. ASSEMBLY ! You need to put your original steel nut into plastic insert first, rounded side in.…
This is a replacement for the plastic cap that protects the Mares MR12 Scuba Regulator 1st Stage. Mine broke due to age and I didn't want to leave it exposed. I printed it first in PLA, but hope to print it soon in something with a…
Modified to fit on MR105 bearing.
Each stand consists of three parts: 1 × Top plate with oval port opening 2 × Runner-style base feet The oval opening in the top plate ensures that the down-firing bass reflex port remains acoustically unobstructed. The recessed pockets on…
Warning: Don't use halogen bulbs. They will melt it.
Modified Grill with Brand LOGO
I made this because I'm using a custom 3D-printed Nema 17 reduction (https://www.printables.com/model/265557-nema-17-geared-reduction) and I've noticed that this introduces some slop to the gear shaft. Mostly due to cheap 625zz bearings…
Special creation for an outdoor vivarium, exposing as little surface as possible for animals to hold on/climp to. Screw holes for surface mounting included, as well as some basic vent holes. Print in PETG (at least) to accomodate for…
X-Touch XR18 / MR18 - OSIMIDI Stage Overlay for use with OSIMidi Stage. I didnt want to use the stickers that you print off with the software, so edited the blank version of the original. This is set up so you can use your X touch via…
MR115 Bearing reference model Step file
Printed this for Netgear MR1100 LTE router. Wall mount cradle. Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 60% Filament: Octave PLA Black Notes: I slowed…
la bombilla queda encapsulada, creo que queda mas elegante
Description: Lost or damaged the original knob of your Makita DMR115 job site radio? Get it back to full working order with this perfectly fitting replacement part! I designed this knob from scratch in Fusion 360 to ensure an optimal fit…
This is a tool to tighten/loosen the fore-end cap on a Benelli MR1.
Drop BMR1 stand 40 Degrees. No supports needed. All pieces should just friction fit together, but you could dab some super glue if you're worried. Make sure it's fully dried before you attach it to the speaker, or the glue may spread and…
Ich ersetze meine vorhandenen Rauchmelder durch die X-Sense XS0B-MR121. Um nicht neue Löcher in die Decken bohren zu müssen habe ich Adapterplatten entworfen. Die Befestigung nutzt zwei Löcher (89mm, 67mm und 57mm Abstand). Für die…
I designed these LED Mounts for my AM8-Mod. As LEDs I used these:…
The clamps use 2 M3x16mm bolt and nuts each as well as the original bolt from the BMR1 stand to mount the speaker to the arm. There are attempts at cable management on the backside of the arm but are a bit of a pain to print and cleanup…
I made this case to mount a presence detector to the ceiling of my workshop. I made the case a bit higher so the sensor can “see” below the other things hanging from the ceiling. Printing Print the case and three of the clips, with the…
Dieses Teil ersetzt die Gummikappen am Aux- und Netzanschluss. Passt auf mein BMR100. Ob es auch für andere Radios von Makita passt kann ich nicht sagen. Gedruckt wurde mit TPU.
These diffuser and shader caps are designed to reduce and direct light from ceiling mounted MR16, GU5.3 LED bulbs - perfect if your bulbs are too bright or scatter too much light. A great solution for balancing light levels without…
Mr Fox decided it was time to get rid of all his power hungry halogen ceiling spotlights and replace them with something more "umweltfreundliches". This retaining clip did the trick. It is a snug fit for the Osram MR16 GU5.3 LED bulbs.…
Special creation for an outdoor vivarium, exposing as little surface as possible for animals to hold on/climp to. Screw holes for surface mounting included, as well as some basic vent holes. Print in PETG (at least) to accomodate for…
These diffuser and shader caps are designed to reduce and direct light from ceiling mounted MR16, GU5.3 LED bulbs - perfect if your bulbs are too bright or scatter too much light. A great solution for balancing light levels without…
Mr Fox decided it was time to get rid of all his power hungry halogen ceiling spotlights and replace them with something more "umweltfreundliches". This retaining clip did the trick. It is a snug fit for the Osram MR16 GU5.3 LED bulbs.…
Dieses Teil ersetzt die Gummikappen am Aux- und Netzanschluss. Passt auf mein BMR100. Ob es auch für andere Radios von Makita passt kann ich nicht sagen. Gedruckt wurde mit TPU.
A simple easy mount that uses the existing holes in the MR1 electronics enclosure. Note: This does not fit with the power supply mounted in the original orientation. The power supply has to be mounted on its side. I have included the STEP…
These small insert boxes are designed to fit perfectly inside the Perel OMR18 storage boxes, helping you divide the space into smaller, more organized sections. Ideal for sorting screws, electronics, or other small items. Just print, snap…
I wanted to get some desk space back by putting the DROP BMR1 speakers on top of my 45'' LG OLED monitor. I was initially inspired by https://www.printables.com/model/563788-drop-bmr1-speaker-monitor-mount/ but ultimately used nothing…
Wall support for TP-Link MR-100. Need to secure this router to a wall, so i made this design. Is not slim fit, have no need for that. Uses a M4 screw on the top, no need extra force. Printed with this settings: - Layer heigth: 020mm-…
This is a simple 3D printable bearing press insert designed specifically for MR18307 (18×30×7 mm) bearings, commonly used in bicycle hubs. It is intended for use with a DIY bearing press setup (threaded rod + washers + nuts), allowing you…
Should easily snap onto the thicker sides of an IKEA KALLAX, if not just use a dab of glue. The model is modeled to mount on the left side, if you want to mount on the right side just mirror the model in your slicer. .f3d and .step files…
A tool I made for extracting stubborn MR16 LED bulbs out of their housing, which often have very little clearing between bulb and housing. Version 1 is very delicate, but requires just a 1-2mm clearing. Version 2 is recommended when you…
