13,911 models
Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489. The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl. We painted it in…
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for one variant
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Author: Cipis https://www.prusaprinters.org/social/18/prints 2-color Remix for multi-material printers. Print takes roughly 2 hours and 40 minutes at 200 µm layer height with 2 materials (Ext. 1 – Blue, Ext. 2 – Silver) . Original model:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
A small, strong case with a collection of optional inserts for different uses. Case Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
The multi-material Prusa MMU3 test objects are useful to quickly test the reliability of the material changes during printing. These simple objects can be printed using different materials and colors, allowing users to test how well the…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Articulated limbs Multicolor support Added coloring on the nostrils and mouth, giving it a bit of a smile
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
The Benchbin is as a 3D Printing torture test designed to benchmark the quality, speed and waste of various multi-color 3D printing systems. It can be printed completely without any supports or brim, with the lid and the wheels being a…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Print approx. €7.95–€9.71 excl. taxPreliminary estimate for PETGSource material: PET
This is my take on my own award winning Flexi Sloth design as a multi material print. There is a pre-painted .3mf file and an .stl file. I also made a pre sliced print file for MK3S+ with an MMU. I will add a file of only the face so you…
Print approx. €2.69–€3.28 excl. taxPreliminary estimate for one variant
🆕 17.08.2025 A stronger clamp has been added to the Basic set. 🆕 28.02.2025 new parts ⬇ All parts can be rotated by 22.5°. Arm The arms are available in 5 lengths: 50, 75, 100, 150 and 200 mm . Each arm has a connection with a hole on one…
Print approx. €9.42–€11.52 excl. taxPreliminary estimate for one variant
Author: Cipis https://www.prusaprinters.org/social/18/prints 3-color remix Remix for multi-material printers. Print takes roughly 3 hours and 40 minutes at 200 µm layer height with 3 materials (Ext. 1 – Green, Ext. 2 – Blue, Ext. 3 –…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant
Update 19/11/23 - Added an extra large version. :D Multi-sort. A sorting tray I designed to quickly sort small parts - nuts, screws, bolts, electronic parts, lego, etc. Most sorting trays are designed to let you pick out a handful of…
Print approx. €4.64–€5.68 excl. taxPreliminary estimate for one variant
This is an anatomically correct human heart. It is created as a multi material version: The heart's Ateries, Atrium, Valve, Ventricle, Papillary and Veins are a seperate file, so you can print a fancy multicolor heart ;) The Ventricle has…
Print approx. €13.84–€16.92 excl. taxPreliminary estimate for one variant
This Multi-Size Hex Handle Scrapper Set is a practical and versatile tool designed for various scraping needs. Featuring three sizes—Wide, Normal, and Narrow—this set is ideal for tasks ranging from cleaning 3D printer beds to general…
Print approx. €5.51–€6.73 excl. taxPreliminary estimate for one variant
My kids wanted mini Minecraft tools. The easy answer would be to print the fantastic models by GSAMakerspace on Thingiverse (10 years ago!), but ~~I have an XL and I wanted them in color~~ my kids demanded diamond variants. My next…
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Hi! This collection of Root 3D buildings and tokens was put together by myself in order to have a nice print-at-home alternative to the popular MeepleSource Root pieces . Almost very single piece in this collection is set to be able to be…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…
Print approx. €5.87–€7.18 excl. taxPreliminary estimate for one variant
Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Very beautiful Deadpool from Eastman. Got his permission to release this MMU remix version. Sliced with PrusaSlicer and timelapsed.…
Print approx. €59.66–€72.91 excl. taxPreliminary estimate for one variant
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
The ideal third arm for your workshop or office. Much more than just a tool. This is the multifunction and electrified tool holder. Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant
After printing both the amazingly designed Cascade card wallet (Print-in-place) from Hugo and the remix for multiple parts (Assemble after Print - Cascade Card Wallet Remix) by 815 Design , I wanted to join in by creating a design for 8…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
A nice simple test for the MMU2 (or MMU2s) which uses all five filaments. Gcode included for MMU2s and MK3s Print instructions I printed these at 0.2. Gcode included.
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Scaled to 300%. Easy assembly. If you want, you can add glue to the eyes.
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
4 handle sizes, perfect for your DIY projects
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
You can print this model, which consists of multiple parts, with any 3D printer. It is necessary to change the color by changing the filament in only 1 piece. All you need are filaments of suitable colors(red, black, yellow, green, and…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
More information in this article .
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
This model is a remix of popular model of battery storage from CAD-Guy . Thanks to this modification you can use each of the beer crate for combination of AA, AAA, 9V and CR2032 batteries (not specifically 1 crate for only 1 type of…
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
Author: Dominik Cisar https://www.prusaprinters.org/social/7/prints The Man. The myth. The legend. Little Josef Prusa Character, designed at the occasion of the Original Prusa MULTI MATERIAL UPGRADE 2.0 release. The model consists of…
Print approx. €11.48–€14.03 excl. taxPreliminary estimate for one variant
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant
We had mice show up in our house for the first time and my wife wasn't a fan of killing them. I first saw this 140+ year old mousetrap design on YouTube and then a make someone had done as a 3D print on that other site. I came up with my…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Change the plastic after a pause or with the help of a plug-in in the slicer.
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
Scale Sized Bowling Pin Printing Instructions You can achieve the same print without a MM printer by using PrusaSlicer and adding filament changes on the Single model. See screenshot. Versions v2: Added unified stripe STL Reduced print…
Print approx. €2.80–€3.43 excl. taxPreliminary estimate for one variant
This is the V2 version of my ergonomic multi size bottle opener, a stronger, more robust redesign made for users who prefer extra durability and stability. Compared to the previous version, this model is reinforced, making it less…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
This bowl has a leaf design covering its surface, inside and out. You can pick up to three different colors for the leaves and another solid color for the spaces in between. Have fun with this print using your favorite filament colors!…
Print approx. €53.42–€65.30 excl. taxPreliminary estimate for one variant
Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…
Print approx. €12.16–€14.86 excl. taxPreliminary estimate for one variant
Let's do multicolour now. Spider-Man 5 colours with MMU2S. Print at least 150mm height. Gcode spidermanps4advancedsuit-mc-basered_icz_02mm_pla_mk3smmu2s_2d7h43m.gcode provided by Ceji3D https://www.instagram.com/ceji3d/ Gcode for 2x…
Print approx. €47.06–€57.52 excl. taxPreliminary estimate for one variant
Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Dremel 3000 table saw. 2 main parts, the base where the Dremel is fixed in by means of a quick tension bracket and the table saw with accessories. In the design I have deliberately opted for an easy-to-stop bracket in which the Dremel is…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
🛠 Universal Add-On Drawer for Desks or Shelves – Multiple Variants Expand your storage space with style and practicality! This 3D-printable drawer is designed to mount under a desk or shelf, making it a perfect addition to offices,…
Print approx. €2.30–€2.82 excl. taxPreliminary estimate for one variant
A compact and reliable filament rewinder based on a linear counterweight mechanism that can be produced in a single 11 hour print. Provides a complete filament management solution eliminating the need for the space wasting and difficult…
Print approx. €10.88–€13.30 excl. taxPreliminary estimate for one variant
this baby yoda vomit toothpaste cap is a remix frrom https://cults3d.com/es/modelo-3d/artilugios/baby-yoda-pasta-dientes-thootpaste#_=_ but painted and laminated in prusaslicer and MMU2 Ready. The Gcode and the 3mf are uploaded.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
*April 23, 2025 update: - added ‘case-front-cutout-thin.3mf’. It's the same as 'case-front-cutout' but has a thinner face, so the numbers can be easily seen from a steeper angle. I wanted a counter that went higher than 9, so I made this…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
YAPH?! (yet another phone holder?!) I needed a phone holder in my car to better read traffic information. This is what I came up with. Mostly as a design challenge since I just started printing, but works pretty well if I may say so. Why…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
11 in 1 - Workshop Multipurpose Tool Features : Scale - 55mm Screw / Bolt Length Gauge M series - Bolt Size Gauge - 1 / 2 / 2.5 / 3 / 4 / 5 Screwdriver + Bit Holder (BIG) Screwdriver + Bit Holder (small) Allen Key Size Gauge + handle…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Simple Rummikub tiles you can print yourself! Even without a MMU! Any friends which color vision deficiency? Take a picture of all your filament colors and let them choose 4 colors they can distinguish! Now you can all play together :D…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number. Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Multi-color remix of feketeimre's Flexi Cat. https://www.thingiverse.com/thing:3576952 Print instructions Use the open -> Project menu to open the file. Modify the filament profiles to match your filament. Select the extruder / color for…
Print approx. €7.46–€9.12 excl. taxPreliminary estimate for one variant
➡️ Check out also mega long millipede Info: for those who likes it long in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant
I used the following Filaments -SuperFilament PLA PRO Graualuminum -SuperFilament PLA Verkehrsweiß -Sunlu PLA Blue -SuperFilament PLA PRO Türkisblau -polymaker PolyTerra PLA Army Beige -SuperFilament PLA PRO Mahagonibraun
Print approx. €17.50–€21.39 excl. taxPreliminary estimate for one variant
This is a Flow Rate Calibration Test specifically designed for PrusaSlicer , as it does not support per-object settings. These models are optimized to use as little filament as possible while still providing accurate results. There are…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Summary Do you love Benchys but are frustrated because they don't float in water? Do you want to print your child a cool Benchy for the bathtub? Here is the stable floating Benchy with cargo containers, smoke and flag in a multicolor…
Print approx. €1.66–€2.02 excl. taxPreliminary estimate for PETGSource material: PET
The model where I stacked the layers on top of each other. It is thus possible to print each layer in one color and to print the entire model more simply. Remixed from:…
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
Simple / minimal multiboard tool holders in various sizes. Width 10 - 75 mm Depth 10 - 25 mm Use the parametric Autodesk Fusion fusion model for other sizes. Requires one of the Multiboard Snaps to click into. Recommended print settings…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
180° Tablet Holder Hinge for the Multifunction Arm Mounting System (Small Arm System) What you need Printed parts Multifunction Arm mounting system (Small Arm System) Multifunction Arm mounting system Spinning Adapter Big Clamp For Small…
Print approx. €3.00–€3.66 excl. taxPreliminary estimate for one variant
.3mf file plus gcode for printing charizard with your MK3S+ with MMU2S This model needs to be printed with supports. Please be VERY careful and patient when removing the supports, because it can be quite tricky. Color layout for the…
Print approx. €22.12–€27.04 excl. taxPreliminary estimate for one variant
Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
2d multimaterial rainbow u can paint it or print multimaterial
Print approx. €3.98–€4.86 excl. taxPreliminary estimate for one variant
Valentines day coming soon! If you forgot a flower buy, you have the last chance to save your problem so you don't have an angry girlfriend / Wife. The red rose is multicolored. — >The rose is 29 cm high and 3 mm thick.< ----- 1. Color is…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Plumbus separated into several pieces to allow for multi-color printing without the MMU. The parts simply fit each other without glue. The g-codes also include stand for the Plumbus, which I didn't design, but I re-scaled it for my…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
This ergonomic bottle opener is designed to easily twist off caps of various sizes. With four different diameter slots to choose from, it adapts to a wide range of bottles and small jars. Ideal for people with reduced hand strength, such…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
I used PrusaSlicer to split/merge models from https://www.thingiverse.com/thing:4635654 to make embedded text.
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
In only 9 minutes you can have a Keychain multitool, with 9 tools. Printed 0.2 layer 60% infill, im used Petg Carbon. -Supermarket Trolley 1€Coin -Big hex bit -Small hex bit -Screwdriver -3mm Tyre recommended change -30mm Ruler -Bottle…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Don't forget to like this model. Pre-sliced gcode by ryanL You can check his made in the comment session. Multicolour pose. Category: Sculptures
Print approx. €40.81–€49.88 excl. taxPreliminary estimate for one variant
In the images, there are great results with tri-color filament and putting gold layers as the two layers on the outside section. The layers are explained in the table below. Reference the picture for the 180 twist for the middle layer. It…
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Remix for multi-material printers. Walls are slightly thicker for better scalability (inner diameter is smaller). Original model by Cemal Cetinkaya: https://www.myminifactory.com/object/3d-print-dragon-wine-glass-house-of-targaryen-6674…
Print approx. €39.00–€47.67 excl. taxPreliminary estimate for one variant
You'll need some 6mm BB gun ammo. (The ones I used had a real diameter of 5.9mm, measured with calipers.) If you want to check that your BBs will work with this print, you can print the top and bottom sections from the “Test prints”…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
MultiMaterial Print instructions E1 Blue E2 Black E3 Gold E4 Orange
Print approx. €11.59–€14.16 excl. taxPreliminary estimate for one variant
Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
5-6 color print of the Earth with stand and x-section cut away Based off this Thing - Multi-Color World with Stand Space in the base to glue in this style magnet Print instructions Based off this Thing - Multi-Color World with Stand…
Print approx. €14.97–€18.29 excl. taxPreliminary estimate for one variant
Yet another head for soozafone's fantastic LUCKY 13 model! This is just some modifications/improvements to BaGooN's also-great rabbit ears head. (Personally, I think it looks like a robot, but maybe that's just because I like robots.) I…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Zootopia badge for a Halloween costume Made by yours truly and I've included the SolidWorks model if you want to change it up :) Print at 0.1mm and do a layer change at 0.60mm and 2.10mm Start with a blue filament then gold
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
This is a 3mf file created in PrusaSlicer to add multiple colors to the front of the mini Y plate. There is an option of 2 different colors for the text. This was printed on my MMU2s unit. Please make sure to lower the speed of the first…
Print approx. €6.08–€7.43 excl. taxPreliminary estimate for PETGSource material: PET
This little beast is completely functional and complete overkill for a Ukulele! The extended scale length for the lower strings makes for improved tuning stability even at lower tunings without the need for heavier strings, meaning this…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Multi socket wall holders with different mounting angles, holder clips and a top cap for the straight mount version. Filament used is Prusament PLA Vanilla white. The multi sockets/power strips that fit these holders are sold by Biltema…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
A simple remix into a “coin” shape of Ceji3D 's Demon Slayer visualizer model. The model has been scaled up in size from the original, and the text/elements rearranged within so that they stack on top of the "coin" to allow multicolor…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Haku's articulated dragon in Spirited Away
Print approx. €7.67–€9.38 excl. taxPreliminary estimate for one variant
Updated version of the table coaster for MMU2S or any other mutlicolor printer Layerhigh: 0.15mm Support: no need Material: PLA wood or what's in your shelter 😊
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
Prusa MK2S/MK2.5/MK2.5S/MK3/MK3S LCD surround in multicolor. As you can see I printed it in Prusa Orange and Black PETG. The LCD-Cover-Original-Mk3.stl is the original file from…
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for PETGSource material: PET
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
The Prusa mini K Factor / Linear Advance is well calibrated for stock. If you have changed your extruder / hotend you might need to calibrate the Linear Advance. This fixes issues where it is blobbing like over extrusion on edges yet when…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print captain america shield, no support, keyhole on the back for wall mounting There are a MMU version and several non MMU versions (200 to 400mm diameter) with 0.1mm clearance, just print and assemble.
Print approx. €29.88–€36.52 excl. taxPreliminary estimate for one variant
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
![Multi-Layer Rotating Rings [Single Extruder, No MMU]](https://media.printables.com/media/prints/1116868/images/8436648_57e3eb31-5416-4c62-96d5-8f7b6a244d45_fbec544c-3120-415d-a502-4816ae87c15d/rotatingmulticolorrings.png)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
