Counting matching models…
Test "cubes" that feature the numbers from 90 up to 110 that you can use to slice your own extrusion multiplier calibration models for both visual and precise methods Dimensions & print time Visual: 20x20x5mm, 10 min to print Precise:…
This is just a basic insert to protect a cheap replacement sheath for the Gerber Multiplier 600 . I have been using this tool for years and never leave home without it. The holders seem to wear out before the tool does and I have not…
Update: After some testing, I've managed to create a version 2 that prints in less time and uses less material, ~10m ~30m. This multi-level calibration test print is designed to help you fine-tune your extrusion multiplier settings for…
This remix of the Extrusion Multiplier Test Tower allows for more flexible calibration. Each level is labelled 1-10, enabling you to experiment with a wider range of extrusion multiplier settings. Fine-tune your printer's performance with…
This is a modular air multiplier that you can print out and make to any length I have not yet tested this print, as I am waiting on some parts to arrive to make it, primarily the VEVOR Inline Duct Fan, 102mm 129.7 CFM Quiet EC-motor…
Cubes from .2 to 1.0mm nozzles. each size is named based on your nozzle size, the wall thickness will be 2x the nozzle. As my research and experience show this to give accurate flow calibration for overall printing. See the Help guide pdf…
This is a Flow Rate Calibration Test specifically designed for PrusaSlicer , as it does not support per-object settings. These models are optimized to use as little filament as possible while still providing accurate results. There are…
I made this air multiplier attachement for the milwaukee leaf blower model #3017-20. This was made on OnShape and available to copy or remix for free. I just ask that if you choose to print these to make money although there is no…
I have designed a Multiplier Token which is double sided - x2 & x5 on the same coin. I allowed for a 0.001mm recess in order to paint white on each side from the slicer. Ideally, I would like to have the two colors separated into parts so…
Coat Hook Multiplier – Turn 1 Hook into 3! Description: Say goodbye to crowded coat hooks! This smart little hook multiplier turns a single hook into three – just snap it onto your existing coat hook. No drilling, no screws, no hassle.…
This is just a basic insert to protect a cheap replacement sheath for the Gerber Multiplier 600 . I have been using this tool for years and never leave home without it. The holders seem to wear out before the tool does and I have not…
I made this because I needed to calibrate my extrusion multiplier and required a calibration cube with straight edges. I do this for each variant of filament (e.g. brand and colour) and for each layer height I need. I do this after I have…
Dreame T30 Vacuum Attachment Adapter (Multiplier) This adapter expands the functionality of your Dreame T30 by allowing multiple vacuum attachments to be connected to the same interface. The model was designed for a precise fit with the…
I like to use miniatures in my games of Dungeons & Dragons, and admittedly, I have quite a few of them. Even so, when it comes time to hunt down the player characters with an entire gnoll war band, it can be hard to come up with six…
Create more space in your closet — by connecting clothes hangers. Small and large version. Not my idea. Wife saw something like this on Facebook and described it to me. Fusion 360 did the rest. Easy print. Designed to be printed with 3…
My Ender 3 requires 4-5 knob inputs to change nozzle temperature. Some printer knobs provide very course inputs, where setting a value is difficult because of over/undershooting desired set point. To provide a gadget that addresses both…
I designed , sliced and combined gcodes from 90% to 110% of extrusion multiplier in 5% steps. And also I designed tags for recording the experimental result with the conditions of date, filament maker, temperature and filament name. Small…
I created this test object to calibrate my flow rate/extrusion multiplier. I'm too lazy and impatient to print a bunch of cubes to figure it out. All you do is load the gcode into Pronterface (or similar program) and print. As the tower…
These are calibration model designed to be use with the Print Tuning Guide by Andrew Ellis . Specifically, for the part of tuning extrusion multiplier . This is designed for PrusaSlicer since at this time PrusaSlicer doesn't support…
TL;DR A faster and handy way to calculate the extrusion multiplier. Collection tools, 3D printing Motivation While working with several layer heights between 0.10 and 0.48 mm combined with extrusion widths between 0.2 and 1.6 mm we…
I have designed these models and manually customised the G Code to print these tests with desired test parameters. Single wall models for speed, each model taking about 20 minutes to print. Stl files are included if you desire to…
Designed to test multiple EM / Flow rate scenarios in a single quick print that doesn't use any unnecessary filament. I have been working on transitioning over to PS as my primary slicer and therefore have been retuning all of my many…
I made some 14mm bowl multiplier, because I saw a glass one and I wanted it! So I made it. In testing of the quad/dual I found that the bowl multipliers can be too close to your face because of the height they add to your down stem. To…
There is not much to say. If you need more than 1 XT60 at a time and dont wanna diasychain your cables. Then this is for you. The V2 Deckel (lid) has stronger bridges. In the pictures you see screws, securing each XT60 connector. You ONLY…
There is not much to say. If you need more than 1 banana connector at a time and dont wanna diasychain your cables. Then this is for you. As screws for the Box itself, I use M4x10: https://amzn.to/42LiaKG Happy printing Sandor - DM4DS if…
I created a DIN mount for Fabreeko's Fan Port multiplier pcb https://www.fabreeko.com/products/fan-port-multiplier-pcb. It uses the Voron DIN clip used for controller / Raspberry Pi mounts.
Foaming - Expansion test These cubes are for the determination of the flow rate of POLYLIGHT 1.0 - LW-PLA at different temperatures. Based on POLYLIGHT 1.0 Technical Data Sheet , these six cubes are printed from 1 to 0.5 extrusion…
For those using Ellis' Print Tuning Guide to tune their flow, this could be very helpful (for me it's the best way so far) who does not know it you have 6 blocks on the printing bed, take them down to check them and suddenly you no longer…
Remixed from another model where he did all the hard work, I just modified it to fit my personal preference, I wanted a belt clip that fit horizontal instead of vertical so I reoriented the clip and opened the bottom side and reinforced…
I print at least one vase mode 40mm cube for every filament roll that shows up. I have lots. I thought I'd make them useful by making a lid that would turn them into desiccant holders for both my storage boxes and my print boxes. Should…
I used PrusaSlicer 2.6.1 with the latest configuration updates aligned with the recently released 5.0.0 Firmware for Original Prusa MK4 & MK3.9 . Print Settings Preset: 0.20mm SPEED Filament Preset : Generic PLA Printer Preset: Original…
Here we have version 2. This time the numbering is on the bottom These blocks are perfect for setting the optimal extrusion if you follow the instructions from Ellis Tuning Guide ← Here it is also explained how you have to set up your…
Description If you value good prints, you are probably familiar with Prusa's guide for extrusion multiplier calibration and you might have tossed lots of little vase-mode cubes into the trash. Well, that's what I did, and being a person…
Maturity: Good 9 prototypes. In use since 2022/11. I designed this model to better understand the bias of calibrating the extruder multiplier by measuring its wall thickness. You will surely find inconsistencies. Despite that, it is still…
Air multiplier design is definitely not stolen from a major British technology company (ta very much Jimbo) Uses long M5 bolts (4x) and matching heat inserts
EDITEDIT: 4" AC fan is weak AF, a ducted BLDC fan is being designed to fit this model EDIT: V2 has slightly thicker and easier to print walls on the outer shroud piece. Another Dyson fan imitation, this one for a 100mm (4") ducted fan.…
UPDATED V2 has thicker outer shell walls and included is a version with a small cutout at the body mating to allow wires to exit based on the airflow direction. Fill the hole with hot glue after routing wires. A small desktop bladeless…
Replacement cup / mounting ring for the Offset Mult pot on Tektronix 576 curve tracers. flip it over and print with supports on build plate
EDIT: V2 has a backpack for housing a motor controller board with dimensions 76x44x26mm Another fan multiplier shroud with legs, this time built around a 545 DC motor, printed fan blades and housing Outer shroud and ducted housing are…
A Dyson/Hitachi style air multiplier shroud for a small ducted BLDC fan (listed below) https://www.aliexpress.com/item/1005006532726309.html?spm=a2g0o.order_list.order_list_main.32.3b561802ML3iPh Glue or silicone the slip joint.
