Counting matching models…
Please check your roll size before printing. My roll diameter is about 10.6 cm. If this is to small you can rescale the model in the slicer program I recommend to set supports just under the free arms (use support-blocker at other parts)…
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
1/100 Scale MG Gunpla Model Base. No Assembly Needed.
NPT Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for BSPP Pipe Plugs? You can find them HERE! Product Description: These NPT pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Did you know that this outdoor camera can't be installed on direct sun ? Funny, for outdoor cam.. anyway, there are 3 variants - with bird spikes and rain drop, with rain drop only and without any of those. I recommend printing it…
This is my original design. It is similar to a circle template. The circles match the outside diameter of galvanized or black pipe made to imperial NPT standard gage. This was a tool of necessity. I was insulating pipes under my house. At…
A delightful jigsaw puzzle featuring 499 pieces, with the intriguing addition of a unique top-piece, making it a total of 500 pieces of impossibly fun challenges! Get ready to embark on an entertaining journey of puzzling and discover the…
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
The 3mf file has the seams distributed a little bit to check their impact. My mini has severe under-extrusions in rounded corners after a long straight. Short straights are ok. Just print it and see if yours look nice. I added pauses to…
About Tock The Ultimate 3D-Printable Board Game for Family Fun Are you searching for a unique, engaging, and genuinely useful 3D printing project? This is a complete, 3D-printable Tock board game that provides hours of fun for the whole…
Credit: Thanks to Lorenzo (@laurent.polese) from MakerWorld for sharing the original design. Modifications made to the original: Printed using a 0.25 mm nozzle for higher detail Buttons scaled to 92% on X and Y axes Buttons scaled to…
A compact, custom-designed toothpaste tube squeezer in a bunny shape, made especially for Easter. It helps squeeze toothpaste and similar tubes more evenly and makes it easier to use every last bit. Practical, decorative, and a fun 3D…
Simple cover for outdoor installation of Anker eufyCam 2 Pro / nonPro. It's compatible only with outdoor installation / screw mount holder. Simply print as showed, support required and then install. “Compatible” also with rain / sun cover…
The Fysetc usb c input shaper devices work amazingly and are super cheap; just plug and play with no fussy wiring. I wanted a way to mount these solidly to the SV06 for measurements without using too much plastic. Came up with these…
Dieses 3D-druckbare Kombigehäuse macht aus einem 16x2 I2C LCD Display / LCD1602 und einem 3x4 Matrix-Keypad ein kompaktes Bedienpanel für Mikrocontroller-Projekte. Ideal für: Zahlenschlösser, Zugangskontrollen, Passwortabfragen,…
Fugenbreite = 2mm Tellerdicke = 2mm Tellerdurchmesser = Ø70mm
Following on the awesome HG gunpla base found here: https://www.printables.com/model/232216-high-grade-gunpla-stand I started tinkering with my own design. This fits into the poly cap under the crotch of most modern HG kits. Improved…
Kryt vytvořený podle reálných rozměrů pin pointeru, tato verze č.1 hladká bez břitu je pouze zkušební a už se pracuje na vylepšené zesílené verzi s břitem, tiskl jsem to z PLA materiálu a myslím, že PETG nebo jiné pevnější materiály budou…
An adapted version of the originally sold KP Framing Block / KP Rahmenpressen-set from Bessey. I needed a version that I could fix to my MFT table
This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…
English see below Wer sich das Prusa LACK Enclosure V2 gebaut hat und eine MMU2 besitzt, hat vermutlich die Spulenhalter für 5 Filament Spulen gedruckt auf den LACK Deckel gebaut. Nachteil dieses Spulenhalters: Die großen Filamentspulen…
————————————————Deutsch———————————————–– Universeller OpenPrintTag Halter mit selbstzentrierender Dreibacken-Mechanik (OpenPrintTag Remix) Dieses Modell ist ein Remix "Reusable OpenPrintTag Holder" und erweitert diesen um eine…
It snuggly fits to the feet of a Hercules Inpulse 500, even when you lift the deck, the feet stay on. You have to push them on at a slight angle, kind of counter-intuitive, but I promise they hold fine afterwards. Print it with any…
Wir lagern die feuchten Brillenputztücher in einem Schrank im Badezimmer. Damit dies etwas ordentlicher geschieht, gibt es nun diese Box. Die genauen Abmessungen können der Skizze entnommen werden. Translation: DeepL We store the damp…
3/4-14 NPS (National Pipe Straight threads) Funnel. Made for most steel drums with these threads. Will take coffee filter is so desired to filter the oil. (I use it to check for contaminants.) https://a.co/d/caqnBdN Added coffee filter…
This model of a simple balancing scale was created to be used as a teaching aid in an “unplugged” activity regarding sorting algorithms. The material might be used in computer science or maths classes to give students the opportunity to…
Daumen-Buchseitenhalter 17–22 mm mit Messschablone Praktischer Daumen-Buchseitenhalter für entspanntes einhändiges Lesen. Einfach über den Daumen schieben und die Buchseiten bleiben zuverlässig offen – perfekt zum Lesen mit einer Hand.…
Zum andrücken der neuen Bremsscheibe, damit der Planschlag zuverlässig gemessen werden kann. Geeignet für Radnaben mit nicht durchgängigen Gewindebohrungen
Da für diese Heißluftlötstation keine richtigen Füße mitgeliefert wurden und das Ding etwas wackelig steht, und, weil die Düsenvorsätze lose dabeiliegen, habe ich diese Basis konstruiert. Die Seitlichen Laschen krallen sich an den…
This is a carry case for the essential gunpla tools. There are 4 slots for Sakura Micron pens to cover most colors needed for panel lining, 1 slot for tweezers for placing stickers, and one slot for nippers for removing the plastic from…
my long year working cheese greater from Migros (https://www.migros.ch/en/product/708104700000) had the handle get loose and fall off, since the attachement was made of Aluminium and did not survive hunderds of dishwasher runs. i took the…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Updates Have a look at the new slim version! Description This is a set of snap-in spool adapters designed for the OpenPrintTag . Some filament brands have oversized inner spool diameters, which makes the OpenPrintTag unable to stick in…
I designed this impressive Gundam hangar, which consists of several standout features. Let me provide you with a detailed description: The hangar is a spacious interior space. It is surrounded by seven walls, which rise up and provide…
Random NPCs for your tabletop game! Print them with supports and a raft. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon…
Deutsche Beschreibung weiter unten. V2: EN: VERSION 2 IS HERE! FINALLY! I apologize for taking so long. I really don't know why I avoided it so much… Anyway, thank you for your patience and the numerous downloads :) V2 replaces the hole…
Made this remix for a friend who wanted a small resin printed helmet.
My PrintInPlace Peterbilt 359 is not suitable for the tight streets of Europe, so here is its short and agile European counterpart! The wheels spin and the engine compartment opens. This model prints all in one go and requires zero…
New NPCs! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access…
New junction box with 4 inputs. The old models had only three and two openings. Two openings are located on one side (see the pictures). This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features four inputs…
This is my first printinplace model for the Honeycomb Wall. I want a drillholder that is tilts forward so that I can see and grip the drills better. The drillholder is for drills from 1mm - 13mm with steps of 0.5mm. On top is a labeling…
This trailer can be connected to my lorry truck as well as the tractor-trailer (downloaded separately) and is compatible with all my existing and upcoming truck modules. That means you can turn it into a dumper trailer, boxed goods…
Remix of the great runner shelf by jay, remixed it to have the gunpla logo on the back.
I wanted to recreate one of the toys from my childhood but designed it as a print-in-place model. I made two 3d printable versions where one is completely print-in-place and a version where you can snap-fit some colors onto it. -no…
Fit runner size of 2.0, 2.5, and 3.0 mm.
Miscellaneous NPCs and PCs for your TTRPG games
These are simple variations on the Sony NP-FW50 battery holder by RodLaird to hold different numbers of batteries. I was impressed with the simple but very secure design but had no need for 4 batteries. Anything from 1 to 6 is now covered…
I strongly recommend printing the model horizontally to give the snap lock more stability and durability. Feel free to support my work and leave a tip.
Hanuman is a symbol of strength, loyalty, devotion and dedication. He was the son of Vayu, the god of the wind, and Anjana, a celestial nymph. In this comic inspired original concept, Hanuman is depicted carrying the his iconic mace, 'the…
After stubbornly refusing to make the attempt, I finally succeeded in modeling ¾ inch NPT threads. This model can server as a plug for a ¾ inch PVC threaded female adapter. But it is generally useless on its own. What it does represent,…
It is a decoration designed to decorate a cake. It's very simple. It is 14 cm high, 20 cm wide and 0,4 cm thick. Please refer to the printing instructions before printing. The model can be proportionally scaled up or down, but you need to…
Created by SD3D_KONG and originally posted on Thingiverse (https://www.thingiverse.com/thing:2791853). It's an awesome print so I'm sharing it here so more people can discover it, but please take the time to check out the original post…
Anpassbares deutsches Nummernschild, die Buchstaben und Nummern sind zum aufkleben oder im Slicer hinzuzufügen.
The original Kobra 3 duct did not properly cool the front and rear of the models, causing failures when we have overhangs or very pronounced angles in these parts. This is my first iteration of the original duct. A front outlet was added,…
Simple NPT M-M 1/2inch adapter that I use to extend a standard shower hose. 12mm ID, thread length of 10/15mm for use with/without a rubber washer. Disclaimer: threads are not tapered so not true NPT. Works well enough though from my…
Note: Picture shows one size, but all 3 sizes from the original post have been adapted for countersunk holes and are included in the 3MF/STEP files. I love the strong and clever design of these hinges that @ESoderberg came up with,…
Kitbashed ¼ NTP male to male ½ hose barb.
**Update 2-Mar-2023:** Added 1" barrel NP5K Files. **Update 12-Jan-2023:** Added Gryphon 1.3 compatible files for solenoid and manual, which should be easier to assemble. Also added select-fire wiring diagram. This will likely be the…
Holds 4 Sony Batteries, simple push-in / push-out. I tried to make this super fast release, since we all know these batteries don't last long. UPDATE: Added a 6 battery version. NOTE: Works with Sony A7,A7II and other Sony products that…
Gundam Plamo Time! Organize your work in progress by printing this simple doodad. You can prop up the sprues by alphabetical order. Get that desk looking super pretty! Send pictures if you make one, or a tip for my own plamo addiction if…
Sony NP-FZ100 battery case would be nice if you could post some photos after printing
#### Update → STL-files #### Print parameters: Printer = Bambu Lab P1P Filament = Elegoo blue PLA 1,75 layer hight = 0.2mm Print temp = 210°C Wall loops = 2 Support = optional for the mountings
FLSUN V400 FYSETC Portable Input Shaper Mount A longer screw is needed to fix it.
Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…
This is a 3d model I created and printed of Pomu Rainpuff from Nijisanji EN. The assembled model comes out to be about 20cm tall. https://twitter.com/Coal/status/1558974996688429056 The model has been split up into 30 different STLs,…
My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
A generic lid for Jars (in this case a pickle jar) with a opening of 77mm and twist like closure Print both parts and glue them together. print with: PLA, layer 0.2, Nozzle 0.4mm
A lot of thought went into this redesign. Thank you akmiller01 for the original model. What's different? Out of the way: Narrower at the top so your trigger/bumper fingers have room to rest on the controller. Slim curve along the back so…
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Fairly simple Gunpla Tool Holder I made to keep on my desk behind my keyboard. Edges are rounded a bit to keep from chewing your fingers up when reaching for things. 2x Slots for Tamiya Panel Liners (40ml) or Small parts trays. 1x Large…
This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4. I tuned this for use with PETG, since that is mostly what I print in. But, I have tested it with some of the PLA filaments I have…
Adapter 1/4" NPT female to 1/4" NPT female
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
1-1/2 Inch Female NPT Pipe Thread to 1-1/2 Inch Male Barbed End 1 : 1.5 Inch FEMALE NPT Pipe Thread One model has a 6 sided hexagon for crescent / pipe wrenching End 2 : 1.5 Inch MALE Barbed (3 Inch) Additional model - TPU Washer – TPU…
This model was originally designed by gaaZolee on Thingiverse. Here is a link to his original model with more information: https://www.thingiverse.com/thing:2729076
This is a WORK IN PROGRESS, I dont think this can be printed yet. WARNING! Update 1, separated the bow, pickaxe, arrow and radio. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of…
These are dual-purpose adapter sleeves that: Allow you to use third-party filament spools in your Prusa USS Drybox without them dragging on their rim Provide a reusable carrier for mounting Prusa's OpenPrintTag NFC tags on third-party…
A slim, functional, openSCAD raspberry pi 4 case. I would recommend also printing a fan cover for any attached fans or just for style as there is a hole by default for the fan. This can of course be disabled by commenting out its…
1 1/2" npt to garden hose adapter with a cone shape inside for extra strength. I used it to connect a temporary sump pump to a garden hose. Category: Household
I removed the tongue to better reach the teeth with the brush. I cropped the model to save weight and printing time. I rotated the model to do a quick color change at layer 33. Printing time 1:10 hours with X1C 20g 0.2 layer height 25%…
I am using this in my RV to adapt the exterior shower hose to a garden hose so that I can hook up an outdoor Fillet Table that has a sink and faucet. Cost: $0.48 Print Settings Printer Brand: RepRap Printer: Prusa i3 Supports: Yes…
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
This is a PrintInPlace way smaller modification of this model: https://www.prusaprinters.org/de/prints/49007-birth-machine-hr-giger Thx for sharing this in the first place to the David Warboss. I just wanted so have this in one piece in…
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
Looking for an efficient rain water diverter on a pretty busy 100mm (DN100) downpipe at my house I found that the few models that came close to my expectations were in the price range of 80 to 180 Euros. So I decided to make my own. Due…
Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS. This is a second version of this one , I added caps & humidity sensor support. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less…
This removes the trouble of having to swap the hubs to use either the standing alone spool or the ace pro. It is oriented for kobra 3 max. In order to use it with kobra 3 or S1 Combo, you need to mirror it before printing.
No supports Layer 0,2 is good enough (finer will look nicer) If needed, size up in your slicer according to your needs
A custom designed Gunpla stand for models with fin funnel attachments or flying accessories. The body arm is directional. I based this on the stand included with the HGBD:R TRY AGE Magnum, I designed the funnel arms and cubes to fit the…
Samurais mask made using blender, inspired by playing ghost of Tsushima, mask does not appear in the game and is custom design when printing this will be tiny in cura or any slicer really, scale accordingly: measure distance from bridge…
New junction box with 3 inputs. The first model has only two. This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features three inputs and can be securely attached to a surface using up to four screws. Seals…
Made an adapter for my sprayer pump. 3/8npt to Garden hose. Print Settings Printer: Anet a8 Rafts: Yes Supports: No Resolution: 0.2 Infill: 100% Notes: Printed in petg with a full brim. Does not need supports. Printed at 235c with no fan.…
Klipper Gold Standard Model for testing INPUT SHAPER, including resonance compensation, ringing, ghosting, printer quality and general calibration. ::::PRINT SETTINGS:::: Suggested layer height: 0.2 mm. Infill: 0%. Top layers: 0. Use 1-2…
Note: I wanted to create some modern-ish shoulder armor for cosplay and started with some Helldivers armor as base. As i progressed with prototyping i felt like it wasnt quite to my liking in how it looks, but still wanted to publish it…
Recently had a bathroom fitting break in the wall because it was under too much tension. Needed an adaptor to relieve that strain and could not find any. So I imported both male and female garden hose fittings and cut and stitched to give…
![Bulky Shoulder Armor + Clip for Attachments [Unpolished]](https://media.printables.com/media/prints/894836/images/6928491_7c419462-5c7c-43cf-91ee-5a081637d2c3_3d6ae363-f47c-4261-a85d-413b03bba5c4/armorcutup.png)