Counting matching models…
I purchased this model to make as a gift for my niece. The dragon and flames are beautiful and printed without any issues. The stand prints fine with a brim, but was a bit weak for my tastes. It obviously needs weight on the stand to…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
An organizer for the Pinecil soldering iron from Pine64, and its tips and cable. Inspired by Zef 's print of Zokol's Pinecil organizer. Thanks for including the STEP file! I modified the design to remove the solder and screwdriver slots,…
Print approx. €6.05–€7.39 excl. taxPreliminary estimate for one variant
Edit: THIS MODEL HAS BEEN MOVED FROM THIS SITE It can no only be found here: mmf.io/o/138678 --------------- This couch shaped puzzle box is a 10 piece puzzle box. It's a fairly easy print with only a few supports needed. Assembly doc and…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
EASY FilamentSamples (only 20min print)
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
left part, right part and center clips needs to put the joiner bars (wood or something) on front and back outside without keyboard foots, bluetooth, and easy switching Win-Mac I gave up the battery space for bluetooth.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Create your own OTF (Out-The-Front) fidget knife with just three 3D printed parts! This compact design is perfect for restless hands, providing smooth OTF action for endless fidgeting fun. Watch my YouTube video for assembly instructions…
Let's Retract! Spider-Man Web Only. Print at least 150mm height. 3 perimeters. To show support please like my designs. :P Time-lapse print video : https://youtu.be/SaA_DnNp9xM Category: Sculptures If you want to customize your guitar,…
If you like my model, you can reward me by purchasing it on Cults3D at the link below: https://cults3d.com/en/3d-model/game/balancing-hat-only-40-minutes-print
Hello guys!! I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated…
Thanks to @XT4V for the printed pictures used above! I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Print this out as you would most other things. Remixed this…
This model is a folding wing glider, tilt the wings down and backward and it will fly like a dart, once it hits its apex the rubber band will be able to overcome air resistance and will flip the wings into glide configuration. With…
Wanna get the commercial license? Have a look at my printables club. I didn't like the original cupholder for my e-class so I made my own. The original holds just the cups, but I wanted it to be also my phone holder. I also had a little…
A design I started to create custom compartmented boxes. Easy to change the size via Change Parameters (fx on the toolbar) inside Fusion360. Make changes to the “Insert” sketch to make custom, removable inserts or just modify the “Shell”…
A remix of the Every iPhone STL & Adjustable f3d File | ScottYu-Jan & OVERWERK model by @Marlfox_1264389 , but this time with only the phone charger portion. Also adjusted the tolerance of the magsafe portion to be a tight interference…
I need mine to be loaded from the top as spools are on top. I also added "washers" to properly center the 5 wheels, it prevents from touching the other parts while rotating and they press properly the bearing axis. Make sure to assemble…
3D diorama rendition of the Rammstein Logo
New version for the top hinge to make it easier to print. Printed with PLA at 0.2mm and organic supports enabled. After printing I used a sharp blade (gently, see photo) to detach both sides of the hinge. Just apply some force until it…
This stops your printer from shitting everywhere and ruining your life. I used decently longer screws going into the back of the Bambu to support the weight of all the parts. The poop chute has at least 25mm of length and can take a…
Does the x-gantry belt angle bother anyone else? Constantly variable belt tension. CVBT. Fixed. Theoretically, with a 3mm belt vertical offset, printing on the left of the bed vs middle only makes 0.0023% difference in the movement per…
Official Skeletor MK7 Side Mounted Cartographer Support: https://www.printables.com/model/1362668-skeletor-mk7-side-mounted-cartographer-integration PSA 7/14/25 * If you're here to download the Right Angle Mount for your K1 Max please…
A fabric paint stamp and crest badge for those looking to upgrade their cosplays! Sciel and Gustave have this printed on their jackets. Verso's is a physical badge and has space for a flat-back pin to be glued.
DUMMY 13 Weapons Storage Rack (Holds 26 Weapons) A compact storage rack designed specifically for Dummy 13 weapons, holding up to 26 pieces while only using around 32g of filament. Perfect for keeping your growing Dummy 13 arsenal…
Made these to help my son learn multiplication. Throw the dice and multiply. I didn't come across any die that I liked, so I made my own. Goals: Easy to print Color Options for printing Fun Two options to print. This model is made to…
A smaller guide for only one 608 bearing since the original by B&B TECH needs two.
!!! PLEASE NOTE - THIS MOD IS ONLY FOR THE 7-FIN, HEAT INSERT MODEL !!! Great mod by @themacboy - appreciated and thx for sharing, and ofc not possible without the whole EVA thing going on before that. After the initial install (of std…
Made perimeters thinner for the right balance of Function x Material used 1.35mm thick wall Saves less material
Button Guard for the Xtool D1 Pro V2 20W Laser Action Button (V2 Only)
I quite often need to quickly draw something with round edges. I find out it helps me to start with these using the “use” directive like "use <round_cube.scad>.
P1P-P1S only, this hepa holder is a bit taller than the regular one, risking potential collisions with the micro lidar on X1 models. not tested though, just a hunch. Since the bento box is meant to suck air in from the top and expell from…
The most basic Arduino case we could design in Tinkercad It only takes two screws to lock the board in place but the case is snug enough and you likely won't have to.This is the first of a series of educational projects and will be the…
This is an adapter for this Logitech shifting Knob (https://www.printables.com/model/897352-logitech-gear-shifter-knob-adapter-sim-racing), because there not fit together I recommend to put a screw in it from the bottom hole to make it…
This is a simple rc plane with only 2 motors that work for all the controll surfacess! No servos needed all you need is a small battery,two mini engines,motherboard,controler and its all! Please print this model with no infill and use…
I thought the materials list for the wireless bento box was excessive so I modified the box to only use 4mm magnets Changes: Brass inserts on fan duct → removed and replaced by holes for 4mm magnets 6mm magnets on wireless transmitter →…
Ducati parking only ich habe eine Pause ins Druckprofil eingfügt um das Filament manuell zu wechseln.
Liked the original “OpenSourceEV Ultimate MagSafe Charging Pad for Rivian” model for the Rivian center console charging pad, but I live in a “house divided”. I - the primary driver of our Rivian - use Android, but my wife uses an iPhone.…
Sailfin extruder adapter for voron 2.4, and berd-air cooling mod.
The Ring doorbell wedge that is paired with the original doorbell camera was too steep of an angle for my liking. Decided to model my own version with less of an aggressive angle. THIS MODEL WILL ONLY WORK FOR (Pro & Pro2 Models WIRED…
It's a sign! Based loosely on the Australian road sign standards. Model dimensions are 300mm x 450mm, scale down to your print bed while setting the desired thickness. Multicolour Print from Multicolour files White, green and blue parts…
BMW parking only ich habe eine Pause ins Druckprofil eingfügt um das Filament manuell zu wechseln.
I had no idea that individuals that were low vision or blind would play word board games…Humbling moment. I decided to create a tile set featuring 3D printable braille that would have more uses than a board game. These tiles work with…
I am sharing the robotic arm that I built as a school project. Disclaimer: Please note that I will not be publishing detailed assembly instructions, complete parts lists, or detailed documentation for this specific build. Goal: The…
This is a cover for a security key (magnet) of a treadmill i've bought this weekend. It houses the magnet and has a small hole for tying a strap. It was tailor made for the one i've bought, but it might help you out as well.
Just a quick mockup, hoping someone'll remix it at some point before I get around to it!
The Tennis Player version of the stencil insert comes with extensions that fit into the grooves of the golf ball stencil holder. Explore other stencil designs Usage Using the Golf Ball Holder V2a,b or Golf Ball Holder (V3) model it is…
A Carbon-only replacement filter for the Prusa Advanced Filtration system. This is V1, I plan to make some improvements to add some internal support for the carbon and make some versions that use less carbon. I may also incorporate a HEPA…
Hockey Player version of the stencil insert comes with extensions that fit into the grooves of the golf ball holder. Explore other stencil designs Usage Used with Golf Ball Spray Paint Holder Jig and either regular spray paint or airbrush…
This is a Modular Bottom Plate as well as increased Optic for the Magpul PMAG 10 AK Gen2 that visually increases the 10 round Mag into a longer looking Magazine (for style points). Assembly: Insert 2 M3 Heat set inserts into the modular…
For LED and battery info. Look at Lazer eyes.
Cable Organizer For 8mm Cables Easy to print cable organizer !ONLY 12 MINUTES! Settings 0,25mm %10 120 mm/s Thanks for dowland! Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Doesn't Matter Supports: No Resolution: 0,25…
The original post had models with storage for the USB and Saturn receivers, and the Saturn receiver solo, but not an option for the USB receiver alone. I leave the RF receiver plugged into the console so this saves me some space.
PHANTOM - your name, made only of strings There are no letters in this print. Only hundreds of thin printed strings stretched between hidden fins and a curved back wall. From almost every angle it looks like an abstract web. Put your eye…
Standard fits easier but may have bigger tire gap, the tight edit will have minimal tire gap (<5mm) and looks better IMO - but fair warning, may not fit immediately! I would start with the standard edit and print the tight ones if you are…
Beware: this insert has couple of limitations, I mostly made it for myself, but I thought someone else might find it useful as well. All the available inserts either ditch the game board in favour of the playmat or were designed for the…
A model of the hyoid bone that I sculpted in Blender over an afternoon. Due to the variability in hyoid morpholog, it is highly likely that this model is not representative of all subsets out there. I tried to be as accurate as i could to…
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
!! This is only an axle part. because I remixed two projects that have incompatible licenses I can't publish them in one model. Get the axle here To make your drybox convertible to use 2kg spools take a look at my other model: Here you…
hand attachment for my sprunki models .ONLY MY MODEL
RepKord's incredible RepRack is a great solution for filament hanging - but the Clamps that hold the Rods to Hangers require non-standard Hardware. Here in Germany, we like things standardized and in accordance to norms. So this thing…
We are excited to announce our first collaboration with Out of Dart! The 3D printed STL files for Fenrir 717 and Greedy Wolf 727 are now available at a 30% discount starting today This special offer runs until March 31st. Features: 1.…
We are excited to announce our first collaboration with Out of Dart! The 3D printed STL files for Fenrir 717 and Greedy Wolf 727 are now available at a 30% discount starting today This special offer runs until March 31st. Design Feature…
This is a remix of DavisSgt's zerømouse mod for the Logitech G102/203, which was initially inspired by optimumtech . DavisSgt's model will not fit if your G102/203 is the 2ⁿᵈ generation LIGHTSYNC version. You can verify by checking the…
Update 12/20/2025: Revised geometry to fit both Tesla Mobile Charger and Tesla Wall Connector (US market chargers only). Added test pieces on Plate 4 of the print profile to verify it fits your handle and cable. I designed my own version…
Top Bar Punk Bracelets : For Common 1 Inch Top Bars Yea the only way to get these around the bar would be to use flex + Look at it can you imagine landing on that spiked one. Soft Flex only. Resize as needed.
Tighten up your shifter even more than what you can get from just the shifter base bushings alone. Not many have dabbed into shifter cable bushings for this car. For other manual cars, many performance shops do this as soon as the new car…
Since the Extruder cable bundle is sagging pretty far after an MMU upgrade (some people even pinched the cable between left rear motor) i made an cheap but very effective solution. It involves even the removal of original PTFE tube (store…
Here you have number three of my tiny (scary) heroes, the crazy articulated dead snowman. It is designed with the connection type i use for my ultra articulated snakes, dragons and lizards. That enabled to get the size down to 25mm in…
its the grappler from parkour reborn easy to color in any slicer that supports coloring by faces
Behold the ultimate 2025 holiday tech flex – a Christmas tree for certified nerds only! It looks like a cute little festive ornament at first glance, but oh boy, someone gave it a serious circuit board makeover. Instead of traditional…
Description This belt holder is a simple and practical solution for organizing belts on the inside of a closet or wardrobe door. It is designed to be mounted using double-sided adhesive tape , so no drilling or tools are required. Once…
It's a sign! Based loosely on the Australian road sign standards. Model dimensions are 300mm x 450mm, scale down to your print bed while setting the desired thickness. Multicolour Print from Multicolour files White, green and blue parts…
This is just the frame of the Core One without any attachments. I adapted it for my CAD ( Alibre )
Einfach zu Drucken und "explizit für TPU Konstruiert"! Jayo TPU Silk ist am besten!!! Ihr müsst das material auf Maßhaltigkeit Kalibrieren siehe auch meine Kalibrierungs-Test!!! 0,4mm Düse 0,2mm Layerhöhe 4 Wände 25% Gyroid infill…
Summary Here you will find a slim, elegant, and ergonomic stand / riser for your Apple Magic Keyboard & Trackpad. The slight elevation at the back ensures fatigue-free typing during use. Optimized for fast print, less material consumption…
Summary A simple but efficient and quick-print clip for connecting H0 tracks. Made especially for Fleischmann, but it should also fit other manufacturers — please let me know in the comments! Print Material: Due to the creep of PLA, I…
I looked up the design from the Bambu community. But since Riser did not find a similar design for the K2 PRO, he made the model himself. There is only support in two places where the dovetail connection is used. (Unfortunately, I did not…
I was bothered by the limited options for organizers for spirit island that are only built for the base game. Most expect you to have expansions or they are just poorly laid out so I made this one to optimze setup time, and to make sure…
This is how you print with multicolor without a ams. Pause the print at around the middle Switch out the filament keep printing
This is a sample project for the printing_only_supports.py script. The script modifies G-code files by stripping out the object-related lines while preserving the support structures. This allows you to print only the support material. A…
This ultra strong hook is designed for doors, shower walls and shower cabins up to 10 mm thick . Despite its compact size, it easily holds wet towels, bathrobes or heavy blankets – tested in daily use. The model is filament-saving , using…
This is a refinement of the previous version of my Riser Corrections: - increased ventilation area by 50%. - the design of some facets has been slightly tweaked to closely resemble the design of the K2 Pro. - the connection tolerance has…
octopus with trumpet Let me now if something is wrong so I can fix it. Supports required.
This model focuses on an anime-style girl character’s face and head only, featuring clean contours, simplified hair shapes, and minimal facial details for reliable 3D printing. Designed as a flexible base model, it works well for busts,…
Hi! Im coming to you with my cool (imo) way to hang our vinyl records ! This hanger wont let your vinyl fall, it has screw and and nut. thanks to this you can take off vinyl record whenever you want! I hope you guys will like my project!…
Tired of tangled cables? Keep them organized with this 1-gram solution! Say goodbye to the mess of cables in your drawer, bag, or on your desk. This compact cable clip is the perfect solution for keeping your USB-C and other cables neatly…
Small mixing tray for glues/epoxies. I prefer to use a giant box of popsicle sticks as the mixer, so I removed the mixing stick from the extremely useful model ( https://www.printables.com/model/1548537-disposable-mini-mixing-pad ) made…
Turn your favorite empty bottles into stylish home decor with this minimalist 3D-printed taper candle adapter. Whether it’s a vintage gin bottle or a classic wine bottle, this holder provides a perfect fit for a modern, textured look. Key…
This is a 2U Right-Stepped Slash & IntlRo Keycap. Only left side of the key switch activates even if you press the right side of the keycap. This keycap uses OEM profile. I made this keycap because key rollovering with IntlRo didn't work…
Small locking push-push latch container - easy to print with no bridges or steep overhangs, so no supports required. Just print and snap the two parts together. Print the "Inset" part in PETG (other plastics may not work well). For the…
Clip is easily fixed at the straps's loop around the lock. Fits all standard 2,5/3m x 25mm cargo straps. 22.2.26: Added versions for shorter (1.5-2m) and longer (4-5m) straps. Strap can be rolled directly "into" the clip, release it by…
DUMMY 13 Weapons Storage Rack (Holds 26 Weapons) A compact storage rack designed specifically for Dummy 13 weapons, holding up to 26 pieces while only using around 32g of filament. Perfect for keeping your growing Dummy 13 arsenal…
Print of eight of each piece. And yes you will need glue, I did try to use 3D printed pins but that failed. I will name the objects by number so you know which piece fits which. example: Tentacle 1 - Wedge 1 will fit with: Wedge 1. And,…
I needed a slim wall mount for my boards and I wanted a horseshoe style that wouldn't really be seen. This design can use M5 heat set inserts or M5 nuts instead.
Model of a plane wing, please comment in the comments on how I can improve!
![Jumbo Integrated Rewinder for 2kg Spools for (un)original Drybox [Drum Only]](https://media.printables.com/media/prints/1128144/images/8513432_593bb1d6-475e-4ace-b06c-6081c0e5e862_75880e9b-7293-4a97-97bb-4398e19ca6ce/img_1127.png)
