Counting matching models…
Edit: added an STL model/3mf file for printing an airless basketball out of Yasin PEBA filament on 5/2/2025. These models/files are for making airless basketballs out of either the PEBA filament or the Ataraxia Art Flexible PLA (FPLA)…
32mm scale wolf miniature for tabletop gaming. Tips, donations or patronage is greatly appreciated ❤️
Anti Bounce Weight Has serration for forward assist which extends a bit back to impact buffer, slowing down the bolt. A Rubber Pad can also be installed to further reduce rearward travel impact. A separate Locking Pad is fixed in place…
Morrigan Rock Bouncer 1:8 Scale: __________________________________________________________________________________________________________________ Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non…
One part, sculpted from scratch. Suupport intensive. Category: Sculptures
It took me quite some time to find these “peaceful” wings. They belong to a guy called “hero”. Sorry that I cannot find the original source of this guy, checked Thingiverse and Printables for a couple hundred models again, but did not…
WWE announcer's table that breaks apart. I use 5mm x 3mm magnets to hold it together. The geometry of the table makes it extra tough so doing a power bomb directly on top of the table might not break it apart but jumping off the top rope…
RC Crawler Obstacle #5 - the Chevron Bounce. Designed with the Monster Truck chevron pattern in mind, and trying to really upset the suspension of the crawler. I printed with PLA and turned fuzzy skin on to help with traction. You can see…
Hello I would love to share my first creation for 3d printing. I was trying to make cartoon version of my Cat for my girfriend. Maybe someone will find it cute to share it with significat other :)
Here's V2 of the RBX24, Rock Bouncer 24th scale Chassis for the SCX24. Based on 2 versions of the IRL Revolution 2.0 chassis. https://www.wideopendesign.com/revolution-2-0-rock-crawler-chassis…
Fixed a small issue with one of the roofs. Here's V2 of the RBX24, Rock Bouncer 24th scale Chassis for the SCX24. Based on 2 versions of the IRL Revolution 2.0 chassis. https://www.wideopendesign.com/revolution-2-0-rock-crawler-chassis…
I went through many iterations of trying to automate the bouncing action of our baby bouncer from using a cordless drill to rotisserie motor. I then stumbled upon this Reddit post which gave me a bill of materials, then I made some…
DEPRECIATED Here is version 2: https://www.printables.com/model/279013-rbx24-scx24-rock-bouncer Here is version 1 of my RBX24, Rock Bouncer chassis for the scx24. It's based on the IRL Revolution 2.0 chassis.…
There are a lot of Yeti handle models out there. I like the two-ring ones that support the tumbler at the top and below the beltline. This one prints easily with minimal supports. It screws together with a printed-in-place screw and it…
3D Print of the bounce crate from Crash Bandicoot, separated into parts for ease of printing. According to my Blender simulation results, it should hold about 23 wumpa fruit; your results may vary. Adjustments to your printer settings are…
DIY Motor für Federwiegen - einfach - sicher (entkoppelt) - günstig - OpenSource - Firmwareupdate geplant (Timer-Funktion, SilentMode, etc) - Servo-Version geplant Print instructions 1. Druckteile Motorhalter: Prusament PLA, 0.2mm, 20%…
Description This toy is built around a flat spiral spring that flexes and rebounds when your cat swats it, creating a bouncy, wiggly motion that’s fun to poke and hard to ignore. One good tap sends the spiral wobbling and twisting before…
Someone bought my new little girl a BabyBjorn bouncer , which is great. However it needed a toy bar. The company sells some pre-made ones with fixed toys for $60, but that seemed like a lot… and it didn't let me hang whatever I wanted…
BOM M3X8X2 screws 623 ball bearing X 2 ( ID=3 OD=10 width=4)
1 oz 0.5 oz 0.2 oz 0.1 oz
In order to protect our wilderness, human waste should be deposited in catholes dug 6-8 inches deep at least 200 feet from water, camp, and trails. This is difficult to do with sticks or hands, so I recommend this trowel. Due to it's…
This model uses the following parts: Parts 100 RPM motor 12V AC Adapter 12V Panel Mount Barrel Jack Speed Controller Canopy Ties Heatset Inserts 11 3x5x4 Heat-set Inserts (4 for base, 4 for front cover, 1 for cam, 2 for bouncer clamp) 1…
My son loves all wrestling and wanted a table cover that wasn't specific to WWE. I tried my hand at 3d model editing to remove the logo.
This is a handle that I designed for my 64oz (1.89 liter) water bottle to make it a bit easier to hold. I measured this for the official hydro flask specs so if you have something that looks like that it might not fit right off since some…
This is a flash modifier for the Sony RX100M7 camera that allows you to hold the pop-up flash upright for bouncing the light for photography. It works wonderfully for softening harsh shadows while illuminating the subject with an…
Meet Lucky Boi — half guardian lion, half fashion icon, and 100% bad luck repellent. Trained in 5 styles of kung fu and 3 types of feng shui, Lucky doesn’t just sit pretty—he stares evil straight in the face (and accessorizes while doing…
My wife loves her YETI Rambler 10oz but it didn't fit the Lexus 350 cup holder so I made this little adapter that provides a 3 1/2 inch shelf that supports the little thermos. The base is open so you can put normal cups their when the…
Original did not fit a 12 ounce can - this does. See photo. Category: Food & Drink
Holder for a 19mm wooden rod for the BabyBjörn bouncer.
A Few Toys for the BabyBjörn Bouncer. The Hole-Diameter ist 20mm. You can print it in one color, or you can use the color change function like I do. I use a Remix of this Rod Holder.…
This a beaker that holds 7.7 Floz (Fluid ounces). Happy Printing!
Based on this piece https://www.thingiverse.com/thing:713599 I designed a bounceplate, which holds the flash up, but also diffuses the light from the flash in the direction. Print in with transluscent material to get the best results. The…
I upgraded this Interactive steering wheel toy with levers (for toddlers) by Peter M and prepared two steering wheels your kid will love. Your child can now become not only a race driver but also a ship captain, or a B-29 Superfortress…
A bull’s head, a six-pack, and zero patience. This pint-sized minotaur guards your desk like it’s the real Labyrinth. He growls at rogue paperclips, intimidates cookie crumbs, and charges any d20 that rolls a 1. Pro tip: calms down with…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
The pointed end is placed downward and a skirt needs to be added. 0.4 /Floor height 0.2
The hook attaching the adjustable rod to the upper part of the bouncer broke on my Stokke "Steps Bouncer" This is a replacement for this part Had to cut the rivet and replace it with an M3 screw and bolt EDIT: Uploaded a beefier version,…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Add a touch of modern holiday charm to your Christmas tree with this beautifully designed 3D-printable ornament. The clean spherical shape includes a built-in hanging loop, making it easy to attach with a string or hook — no extra parts…
I wanted to get the fabric sheet box off the shelf, so I made a box that would mount on the wall and hold the Bounce fabric sheets. You can put the whole box in or you could put just the fabric sheets from the box directly into it. I have…
Quick and sloppy cut and choppy! Some shock mount relocation bits as well as a battery mount and esc mount to be used on the SCX24 ROCK BOUNCER CHASSIS! by shanekpostma that you can find here…
Set the perfect mood at home with this sleek 3D printable flamingo model, designed to glow like a neon sign when wrapped with LEDs. This compact design is easy to print and can be mounted on the wall using adhesive or a nail. Simple and…
Great for outdoors or where you can't bounce flash off the ceiling. Aim flash upward in bounce mode and it effectively enlarges your flash. Use white TPU for best results, if you print with a rigid filament, it will not slip over the…
This is a cupholder insert for a couch factory cupholder to hold wide containers such as a Yeti Rambler 20oz thermos without tilting. It is snug in the factory cupholder by design yet still pops in and out easily and flattens the bottom…
Should print fine with the drain holes down on the print bed (that should have the best surface finish on the top). Any PLA or PETG should work fine.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
The announcer dude from bfdi, bfdia, bfdie
Design for a baby bouncer toy bar. Modelled after the Baby Bjorn version. A little more involved than just printing but worth it in the end. Materials needed 20in or 500mm of 0.1875in or 5mm steel round bar Two printed end caps Two…
Ich habe diesen Hammer konstruiert und die Teile gedruckt. Im Griff habe ich einen Metallstab Ø6 x 120 mm eingelegt um bei größerer Kraftaufwendung diesen Bereich zu verstärken. Alle Teile habe ich mit einem dauerelastischen Kleber…
Ridged bounce card/box for the Nikon SB-400 so it can be used in more places
Introducing the Bouncy Heart Fidget Toy —a delightful 3D-printed gadget that combines love and laughter. Press its top, and watch it spring to life, offering a playful way to express affection and relieve stress. Key Features: Interactive…
I liked the adapter but expanded it to cover the whole flash. I don't know that it makes a huge difference, but I like the result. Instructions I printed with 15% infill with no problems. Category: Camera
This is a modified version of the mount that replaces the Morrigan seats with GM3 mount and at drivers eye view. The VTX mount continues to support the 40mm fan but has been modified slightly to fit the CADDX VTX v2. Its pretty rough…
This little piece slides into the flash socket on the Sony A6000 or A6500 cameras to hold the flash so it points up as shown in the photo. This allows the flash to bounce off the ceiling instead of hitting the subject directly. A bounced…
This cam has room for a 608 bearing (standard skateboard bearing). This allows the axle to spin freely within the cam, which results in much smoother motion and makes the cam less prone to failure. I took advantage of the fact that akak's…
Introducing the Fuzzy Friend! If you have a humidifier or purifier with a rotating air outlet, you can even make them bounce merrily ~ Captivate young children for ten minutes or more :D A plush surface has been specifically used to…
If you also bought a used Nikon SB700 and didn't get any accessories with it I recommend these. I modeled it so it's not perfect but it fits pretty well, doesn't fall off. I used transparent PLA for the diffuser and white for the bounce…
This model uses the following parts: Parts 100 RPM motor 12V AC Adapter 12V Panel Mount Barrel Jack Speed Controller Canopy Ties Heatset Inserts 11 3x5x4 Heat-set Inserts (4 for base, 4 for front cover, 1 for cam, 2 for bouncer clamp) 1…
This is a modern approach to the old baby food jar method of storing small parts. This holds a small 5.5 ounce snack cup for easy access. Just lift the cup up slightly and slide it out. There are ramps built inside so that when the cup is…
Adapts a metal FJ-30 dust blower intake to a 4" dust collection hose. Requires disassembly to through-bolt the adapter to the sheet metal. Requires four small screws and locking nuts (M3, if I remember correctly) to install.
smd feeder 8x5 12x5 24x5 debounce m2x5 screw x2 m2 nut x2
My original buttons were destroyed in dryer. I printed these and they work just fine, they survived washing machine, I just will not risk the dryer again…
This print holds a paper infont of the builtin flash for Nikon DSLRs. This effectively diffuses and bounces the light, wich reduces the harsh shadows and reflections often seen in imares taken with a flash.
Hammer made for OSAT project at Michigan Tech Use a 3/4" x 3.5" bolt Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Notes: Category: Hand Tools
🐉 Scorch – Punk Club Dragon Bouncer Meet Scorch , the last thing you see before you’re told “not tonight.” This punk-styled dragon serves as the bouncer for the loudest, rowdiest club in the realm — arms crossed, wings folded, and…
Needed something for the fridge door to bounce. Printed in PETG the springy part. With wall thickness and infill the strength of the spring can be adjusted. The Second part I printed in TPU without infill to get a bouncy air pillow.
This water bottle is prone to denting and breaking, especially at the bottom, so I designed this. Amazon
Replacement for a Lattoflex Bouncer from arround the 1960 Printed in TPU 95
I’m using the LED light for negative scanning, but the individual LEDs were too distinct and appeared in the images. To solve this, I designed a diffuser that blends the separate LEDs into a single, more uniform light surface. A frosted…
This is a remix of Zee Blank by MakerBot. For the bounce back dummy to stay upright you will need to put something heavy in the base, I've used some coins and a bit of card to stop them moving around. Print Settings Printer Brand:…
Originální odražeč - ideální pro stolní hokej nebo jiné užití. bouncer ideal construction for hockey or other
Welcome to the Bounce Revolution! We were tired of traditional geeky camera bags and wanted something minimal, compact, light, and something that would protect our gear against even the roughest days of use. This case system is called the…
It's a bigger remix of https://www.printables.com/model/289558-dragonwood-card-holders-and-small-dice-tower tower model
Sleeve for debounce latch of Razor A5 Lux scooter Print Settings Printer: FBG4S Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: Best Fillament PetG Blue Category: Sport & Outdoors
He is a bouncer made from simple shapes
Printing Information: Use tree support to support the voronoi structure (25° angle threshold works well). While it may leave minuscule marks, I recommend allowing supports onto the model itself to avoid some really angled supports.
Tired of your Soda being stolen from the company fridge? Then hide your favorite beverages under your desk away from your nosey colleagues by using this stealth C-Clamp mount to hold a 12 ounce soda can beverage under your desk! Print two…
We needed a high Foot for our Hauck Baby Bouncer. Use at your own risk, the bouncer is not as stable as before. It can and most likely will tip over. You need two screws and nuts.
Customized version of https://www.thingiverse.com/thing:3560006 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3560006 Instructions Using the following options: text = get out font_name =…
Just print 2 or 3 copies with 10% fill and plug them in the holes on the bottom.
This is the Planetary Bean Bouncer, an open-source DIY coffee roaster based around a stainless-steel flour sifter drum, driven by a single motor using a wobble disc and planetary gear system. The wobble disc converts motor rotation into a…
My personal take on the battlebot Dead Cat Bounce by makermuse yt channel. happy printing!
My son loves his Tiny Love Take Along Bouncer. Unfortunately, I managed to break to by incorrectly folding it causing the joint to crack. Not wanting to spend another $100 on a new one, I pulled the hinge out, model it and 3D printed it.…
Hook attaching the adjustable rod to the upper part of Stokke "Steps Bouncer". Remixed with threaded insert. BOM: 1x M3 threaded insert 1x M3x27,5 (Minimum lenght) Before first use, thread the screw in from the insert side to form threads…
I had the game but was missing the bottom piece that made it tilt and rock while you play (whole point of this version of the game). I couldn't find any models online or any definitive measurements or pictures with measurements so this is…
This modern Christmas ornament features a clean spherical shape divided into elegant horizontal sections : alternating Fuzzy Skin for a warm, textured look and smooth surfaces for a striking visual contrast. A precisely designed top…
Da bei unserem gebrauchtem Hauck Neugeborenenaufsatz & Wippe 2in1 für Alpha Hochstuhl / Bouncer ein Silikonfuß fehlte habe ich diesen hier nachdesingt und in TPU gedruckt. Passt evtl auch bei anderen Modellen, die einzelnen Stangen der…
English Version Bounce4Nap is this great project by edelsteff of an open source spring cradle. These things help a lot with your little ones. Unfortunately, these things cost a lot. Bounce4Nap tries to solve this by building an affordable…
This is the Bouncer, a fully remixable and fun model I made in blender. Stuff you will need 4 10-inch springs 2 1-inch springs Attachment stuff of your choice (I used wire, but you can use hot glue or a 3d pen) Printing Instructions Use…
A bull’s head, a six-pack, and zero patience. This pint-sized minotaur guards your desk like it’s the real Labyrinth. He growls at rogue paperclips, intimidates cookie crumbs, and charges any d20 that rolls a 1. Pro tip: calms down with…
It's a bigger remix of https://www.printables.com/model/289558-dragonwood-card-holders-and-small-dice-tower tower model
This is the Planetary Bean Bouncer, an open-source DIY coffee roaster based around a stainless-steel flour sifter drum, driven by a single motor using a wobble disc and planetary gear system. The wobble disc converts motor rotation into a…
🐉 Scorch – Punk Club Dragon Bouncer Meet Scorch , the last thing you see before you’re told “not tonight.” This punk-styled dragon serves as the bouncer for the loudest, rowdiest club in the realm — arms crossed, wings folded, and…
This little piece slides into the flash socket on the Sony A6000 or A6500 cameras to hold the flash so it points up as shown in the photo. This allows the flash to bounce off the ceiling instead of hitting the subject directly. A bounced…
This cam has room for a 608 bearing (standard skateboard bearing). This allows the axle to spin freely within the cam, which results in much smoother motion and makes the cam less prone to failure. I took advantage of the fact that akak's…
Morrigan Rock Bouncer 1:8 Scale: __________________________________________________________________________________________________________________ Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non…
I went through many iterations of trying to automate the bouncing action of our baby bouncer from using a cordless drill to rotisserie motor. I then stumbled upon this Reddit post which gave me a bill of materials, then I made some…
