Counting matching models…
Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could…
V2- PTFE bowden tube guide and CANBUS wire support **** 7NOV24 -Removed a zip tie hole on the long arm's that was a weak point **** I've made some adjustment after some feedback from the community. Changes made over V1: Added a option to…
K1 cable chain clip to allow placement of the bowden tube on top of the cable chain. If your have extrusion issues this may help with the addition of a lid riser. Updated: As requested I have created a side mounted clip. Please don't…
Made this clip for the K1 Max, from my original clip for the K1, it now is more compact, with rounded corners on top and tighter tolerances to fit snug. Have also included a newer slim model. I found that the original bowden tube clips,…
This connector needs no extra hardware parts and is used to connect your bowden tubes together. Due to its mechanism, one is able to connect/disconnect the tube by simply twisting the screw cap a little. If you have to modify it to your…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…
Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…
Print with ABS or PETG with brim and support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. After printing, remove the support by pushing filament through one of the opposite entries.…
Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…
A print in place rotating clip for the K1 series bowden tube, easy to print, easy to use.
Replace the toolhead cable clip with one with M10/M6 thread to fit a reverse bowden system. M10 racor is highly recomended! M6 racor is not recomended because it ads too much drag on the system so the filament do not run smooth. PTFE tube…
I needed a three way connector for my X1C when using the AMS, an external spoolholder and a Filament drybox. This is the design I came up with. For external parts you need 4x PC4m10 bowden tube connector. Make sure you have the connectors…
TriangleLab Bowden Tube Clip, 1.5mm thickness. Edit: Added another version 1.6 mm thickness. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 10 Filament: SUNLU PLA+ White Category: 3D…
This model was provided to me by Creality support to fix the broken pneumatic connector on top of the extruder of the Creality K2 plus . You can also print this to prevent your pneumatic connector from being damaged over time on the top…
I liked a lot the original print but I wanted the tube at the same height of the hole in the back of the lid riser (in my case the Nu-K that has it placed ~20mm higher than the chain). I suppose that it should fit on the K1 Max cablechain…
A filament guide that replaces the spool holder and enables the attachment of a bowden coupler/connector and the filament runout sensor. You can use the original screws for the attachment. Use PETG, ASA or ABS if you plan to have your…
V0 Upper-Rear Bowden Inlet (URBI) A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with an optional filament sensor. There are 6 Variants: URBI - The basic, just a hole to pass the bowden tube through. URBI-PC4 - with a…
Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…
its that thing p.s. to prevent people from being upset - i've no idea if it fits e3d v6 or not. naturally the printed version is not as good as the real thing, but works as a temp solution while you are waiting for a pack of 50 of them…
Wanted to free the reverse Bowden PTFE tube on my Creality K1 printer.
Hi, I have developed new PTFE clips for the K2 Plus and have also modified my K1 bowden clips to be compatible with the K2 Plus. Currently, there are two designs available: one replicates the original factory K2 Plus clips, while the…
Height: 1.5 mm. It is possible to print in resin or FDM
hi, this is my desing of a creality ender 3 cooling&mount for an e3d v6 hotend you will need: 1x 50x50 fan 1x 40x40 fan 11x m3 bolts 3x m3 nuts The hotend can have additional coupler on the top, there is enough space to fit everything you…
Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…
Improves the silicone rubber bushings that ship with the Space Pi Dryer and Space Pi (Plus). Designed to hold the end of the PTFE tubing in place, and prevent it from slipping inside the dryer. Does NOT work with the Space Pi X4. Internal…
Hello, we would like to introduce you to our stealthburner conversion mod. With this mod, the standard printhead from the vyper is exchanged for a stealthburner printhead (thanks to the Voron community). compatibility list: - anycubic…
Thank you Marko Borsic for the original design. It fits great, and prints well. I've noticed that the stiff 6mm PTFE tube coming from my Polydryer filament box tugs on the adapter, and pulls up the side that the tube goes into. I've added…
This is a quick and easy printable clip designed to hold the bowden tube of your Ultimaker in place. After inserting the tube into the fitting, pull it up and put the printed clip underneath the collet to secure the tube in place.
Please Like and Download my design so I have a chance to get Prusameter bonus, thanks ! A small and easy to print clip, to hold the Bowden tube and the cables together. Fits Ender 3, 3Pro, 3v2, CR-10 Voxelab Aquila, and in fact any…
4-in-1 Bowden (PTFE) Tube Clips Tidy up your AD5X' PTFE tubes with these clips. 5mm and 10mm versions. Prints in about 3 and 5 minutes respectively. Good project for left-over filaments.
Technically not a remix, but the concept is similar enough to VoltexRB's work that I've nominated it as such. Basically works the same as their version, but has a slightly better fit and deeper grooves to make it harder to come loose.
Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…
Ender 3 v2 Bowden clips. I used the MIKA3D Silk Copper because I was at the end of the spool and didn't feel like changing out. In the future, I would probably use Hatchbox Black. I would also probably change the quality from 0.2 to 0.16…
These brackets allow you to use a reverse Bowden tube to stop the filament from pulling on the extruder and giving inconsistent extrusion. This increased print quality significantly for me. Designed to be used with either my Neptune 4…
Bowden tube and CANbus cable support clips. Oftentimes switching from conventional setup of gazillion wires into cable chains is a bit tough as there are certain challenges with this. Small things can make big difference. Challenge this…
This is a remix of the Voron 2.4 Bowden retainer that features an M10 thread at the back for a fitting that retains your PTFE tube . It's designed so that the fitting can be screwed into the back, and the tube pushed all the way through…
holder for a reverse-bowden fitting for the creality sprite extruder. with this holder the filament roll can be placed sideways or in a dryer. petg → 250/70 celsius → 0.12mm layer
I just got the Creality K1 and I wasn't happy how they plugged the Bowden tube, there is too much force/stress on the plug on top of the extruder while it moves, So I designed this simple part to be fixed by the Drag Chain screw. Just…
The tip is modified to house a 30mm PTFE Bowden tube to help apply the solder close to the components.
Always liked those quick release bowden fittings, but unfortunately the regular sizes (M6/M10) don't fit on Prusa MINI. So I decided to make an adapter. UPDATE 24.07.2020: Stretched the hex-nut a bit, so that the transition between thread…
This is a narrower bowden tube clip to hold the PTFE tube on top of the cable chain so that it doesn't touch the glass. The original factory K2 Plus clips tend to release and slip off the chain after a while, and misplacing them limits…
Ender 3 V3 SE - Z axis reverse Bowden mount used in combination with https://www.printables.com/model/602032-ender-3-v3-se-ender-3-se-reverse-bowden-adapter and a spool holder to move the spool from the top of the printer to the right…
This model is designed to mount on a 3mm panel and comes in three angles relative to the panel 0°, 30°, and 45°. The mounting pattern is an equilateral triangle with sides of 26mm. You will need to drill three 3mm (or 1/8") holes and one…
This is a bowden pass through for the bowedentube on Voron printers. I have a 350mm sized voron and It bugged me that the spool is so far in the back. putting a hole in the side panel to pass throug the bowden was no potion because this…
This an alternative version. Adapted from another contributor.
This print allows the use of a Bowden tube direct to the extruder when printing hygroscopic filaments. The top is threaded to accept a PC4 M10 fitting (which is actually a 1/8 BSP thread). This fitting has a larger hole inside, so it…
An insert for the Creality filament dryer to securily attach a 4mm bowden/PTFE tube. It should be a perfect fit for the dry box hole and a tight fit for the bowden tube. If not, the fit can be tuned with a 4mm drill bit and glue The…
A beefed up chain with stronger parts which will not break easily. Tested over hundreds of hours, printed with Sunlu ABS. No supports needed, print orientation as provided (opening for cables face down). Chain link with bowden tube…
Print at lowest layer height you can.
Sunlu wedge/filament guide/bowden adapter for the S2 drier. Keeps filament at a natural unspooling angle for less resistance and in a better location than the factory hole. Threaded for 10mm fitting. Wedge allows humidity to escape.…
Easy, quick printed way to help your Bowden couplers stay tight and strong. Print without supports, as oriented, using your slicer's finest “super quality” setting. Three (3) varied thicknesses of clips are provided: 1.00mm, 1.25mm, and…
I created a handy 4-way Bowden splitter that's perfect for my MMU project. It works well with different kinds of printer setups too. This gadget simplifies handling several filaments at once, making your printing smoother. You can quickly…
Add a Bowden tube to your Sunlu FilaDryer S2 using this improvement wedge and a M10 Pneumatic Fitting. This remix of RENOxDECEPTION's "Sunlu FilaDryer S2 Improvement Wedge W/M10 Thread + PTFE Tube" simply adds a few fillets to soften the…
I've designed a solution for my Qidi Box and Qidi Plus 4, integrated with a Sunlu dryer. Y-splitter allows all components to work, and eliminates the need for frequent reconnections. Please look for pc4-m6 “through” type, for reference…
https://github.com/DeBau/VoronMods/blob/main/Top%20Bowden%20Guide/Pics/TopView.jpg BOM 2-3 x heatset inserts M3x5x4 2-3 x M3x8 - 16 SHCS for Bowden Coupler Version BSP 1/8 Bowden Coupler for Glue Version 3M VHB Tape Required parts Version…
tl;dr This is a modified side handle for the CORE One, designed to integrate a PC4-M10 fitting. This allows you to quickly connect PTFE Bowden tubes, e.g. for connecting an external drybox or spool holder. Using the mod To connect a PTFE…
Simple bowden tube mount for M6 bowden coupler. Requiered Hardware: 2x M3*8 countersunk 1x M6 bowden coupler
This is a bowden/PTFE tube coupler that fits an ECAS04 on each end. I've printed mine with PETG, but it should also work fine with other filaments like PLA, ABS or even TPU. I'd recommend cutting a chamfer inside each bowden/PTFE tubes…
Print with ABS or PETG. Use auto rotation, no support. Don't use too much force when screwing in the PC4-M6's. Screw the small part to the printer (see picture), remove existing screw first. Remove the coupler from the printer. Screw in…
German: #Beschreibung Der Bowden Clip für den Snapmaker U1. Ideal zum Ersetzen bei Defekt oder um die vorhanden Clips zu erhöhen. Druckeinstellungen Druckmaterial: PETG (für offenen Drucker) - (ASA für Geschlossen) Layerhöhe: 0,2mm…
This is a drop in replacement of original K1 MAX bowden tube clip. Print it on the side with a brim. No supports are needed. I printed it with 0.2mm layer height, 3 wall loops and 4 bottom and top layers and it works great.
v2.0: Updated to be more like the design I did for the Polydryer. The updated design includes a 3d printed nut for stronger attachment. I noticed after a while the 1.0 version in PLA would get loose when heating ABS and ASA. It's…
Remix to improve a bowden tube guide from Rileyprints3d on Creality Cloud. Meant to be used with a riser.
I made this modification to be able to easily remove the PTFE tube for filament change and cleaning (cold pull). Important note: PTFE tube should be snug fitted in the hole, yet easy to remove. Models have a 4,3 mm diamater hole which is…
This a drop-in replacement part for the K1 extruder cover. It's compatible with all versions of the extruder (V1, V2, V3). I have made this cover because I wanted to be able to upgrade the extruder V1 and V2 with the most interesting…
Help with tube and cable management, by making the tubes a tight bundle you are able to get a better gradual sweep to help with filament feed, the longer on goes but the 4 n 1 adapter this keeps a slight sweeping of the tube for…
I recently added a Micro Swiss NG to my Ender 3 V2. I am going a reverse bowden route, with the eventual goal of printing some more hydroscopic filaments. So i purchased a Sunlu S2 filament dryer and used my long Capricorn tube to feed…
Printed in PETG 0.2 layer height 4 walls 30% infill Supports - on build plate only
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…
Inspired by " Core One modified bowden-bend with wider radius " by @Petehagoras. RELEASE 27/07/2025 New slightly lower version (-1mm).
As the name. You need 5 JP4-01 or PC4-M10 to use this. The JP4-01 has shallow cut so it's preferred to minimize the filaments getting stuck.
The Prusa MK4's extruder filament inlet has a threaded M5 hole for which Prusa provides a Festo QSM-M5 fitting to use with MMU3. This model replaces the QSM-M5 in a reverse bowden system for the MK4. The adapter is designed to take a…
Habe hinten 3 Aussparungen für Magnete 6x3mm hinzugefügt. Ausserdem die Bowden-Eingänge mit “AMS” und "EXT" beschriftet. Das ganze ist MMU und AMS tauglich. Kann also als Multimaterial-STL gedruckt werden. Remix von…
Allgemeines: Das Modell sichert die Bowden Tube in dem Fitting und sorgt somit, dass die Bowdentube nicht ausersehen rausrutscht. Ich habe das modell an PC-M4 und PC-M10 ausprobiert. Der Unterschied zu anderen Modellen dieser Art ist,…
Simplistic reverse Bowden with an integrated cleaner (sponge) space on top of the extruder. Print instructions Category: 3D Printer Parts Print Settings Printer: Prusa MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15%…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás další díl na mojí oblíbenou Kobru 3 Combo. Jedná se o vedení bowdenu, pokud mate tiskárnu pod ACE. A tim pádem ACE pro je nad tiskárnou. Díky mému vedení vám už…
I am not the original designer, I just changed the thread from M10 to BSP 1/8" (the correct thread for P4 M10 connectors
Update 13.04.2023 -Added left side version with correct thread. Reverse bowden set for Prusa i3 MK3S(+). Includes modified OEM Prusa i3 MK3S+ top right z-mount and fs-cover with additional mounting points for PC4-M10 quick fitting…
When cleaning out a clog I accidentally broke the coupler that attaches the bowden tube to the extruder on the Ender 3 Max, so I modelled a new one. After 3–4 iterations it came out pretty good. Insert the coupler into the extruder and…
Does not catch on the modified (raised) lid Не чіпляється за кришку як інші тримачі трубки Nezachytává se o víko jako ostatní držáky
Thank you Marko Borsic for the original design and Boris Cvjetkovic for the remix with the clip. It worked great for me but sometimes the 6mm Bowden tube could pull out with little pressure when slightly moving my polymaker filament box.…
It's a very simple spool wall mount. Insert a PTFE tube into the hole on the front and push it to the very end, then cut off the excess. Spools glide really good and self-center. The optional guide is printed in one piece. You need to…
This upgrades the Creality Sprite Pro extruder to a reverse bowden setup. I have only tested this on an Ender 3 V2, so please feel free to remix according to your setup. Note that one of the parts listed is an M10-0.75 x 5mm heat set…
Magnetic twist-lock connection for PTFE/bowden tubes. Parts 2 x 6x3mm magnets 2 x ECAS Connectors 2 x Printed parts (ecas magnetic coupler) Assembly All items are press fit, but might require tuning Magnets should be inserted in opposite…
Finally made a PC4-M10 adapter for push-through bowden fittings. I use it on the extruder drive, so I don't need that extra small piece of bowden tube.
I created a coupler in Open SCAD that uses a PC4-M10 fitting with a seat at the end of the coupler for a reverse bowden tube to rest on to prevent the tube from moving further in. The design is threaded for a matching nut that is also…
The Bambu Lab X1 & X1 Carbon use a PTFE bowden tube to guide filament to the print head. There is a little bit of wiggle, which causes the tube coupler to dig into the tube over time. I was never very happy with the amount of play allowed…
Bownden tube adapter for creality Space Pi.
Makes use of a voron style spool holder (Which are super awesome) and attaches to 2020 extrusion. Has an integrated opening for a reverse bowden tube that sits close to the spool, so no overt unwinding. It works really well. The spool…
This is just a quick part I designed to guide the Bowden tube better when you are using the side spool holder. It does require (2) M3x6mm flat head machine screws, as the stock screws are not long enough. I just printed it in PLA.
Updated August 11th, 2024: Modified mount for use with Creality K1C. Thank you to @Willem_337986 for printing the modified version to test compatibility. This is a variant of my other side mount that incorporates the spool holder directly…
This is a quick remix of the original Prusa part, it adds a friction-fit adapter for a standard bowden tube. Allowing you to feed filament from a drybox near the printer.
it reduces shaking of the spool while printing fast infill mounts to the top horizontal extrusion i recommend printing it using 3 walls as it may creep over time requires: 1x m3x10 screw 1x m3 tnut 1x appropriate length bowden tube (for…
Multiple different PTFE bowden adapter styles. One that uses a PC4-M6 connector, a PC4-M10 connector, a PC4-M5x0.8 connector and one that accepts the 4mm tube directly. Print instructions Use standard settings recommended by PRUSA for…
This project is an elegant geared-drive, bowden feed extruder, based on tempo502's B'struder. It combines the idler arm from there for PC4-M6 pneumatic/bowden fittings, with your basic Wade gears. With a suitably-modified idler arm, it…
Wanted to make an adapter to work with the included parts, this can be installed on your already assembled INDX. This thing attaches to your filament sensor assembly and allows you to connect PC4-M10 passthrough fittings, or another model…
This is a Remix of the awesome "Bowden Speed Loader" by MrFlippant with a guide for the filament to hold it in place.
![[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip](https://media.printables.com/media/prints/1135017/images/8564847_4f16d96d-bbb0-4e30-b512-e6cbef000ca4_6b610305-5426-469c-81a4-ef02564ed108/2025-01-04-img_9970-ad5m-bowden-ptfe-coupler-c-clip-cropped-w-labels-printables-thumbnail.jpg)
![[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE](https://media.printables.com/media/prints/1137278/images/8582109_08a5091e-d6fd-4b16-aede-06f1f3f273cc_a863e0eb-efc0-4315-8953-1c3240258fd2/2025-01-06-ad5m-bowden-ptfe-coupler-c-clip-option-2-of-3-printables-thumbnail.jpg)
