Counting matching models…
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips OneBlade? Print yours now. Trim and style your beard, just the way you like it. About Philips Fixables Fixables is a collection of 3D printable spare…
PHILIPS OneBlade - Compact travel case 🔑 Key Features: Easy to Use - No Assembly, No Supports, just print and use. New and Original Locking system – Custom designed locking mechanism keeps the case secure, in addition the printed…
Combs are in the original "click" system. Randomly tested sizes: 1mm, 2.5mm, 4mm, 5.5mm, 7mm, and 8mm – each one fit my razor. I don't recommend printing multiple at once. Print one first and check if it fits. Printed on a problematic…
The (imo) Ultimate OneBlade Wall Mount (for Philips OneBlade Face & Body ). Precisely modeled for tight tolerances for friction fitting multiple accessories onto a space-saving wall mount (pressure fit/interference fit). No supports…
A stand for the Philips OneBlade and its accessories. OneBlade Holder 1 Blade slots 4 Guard Slots (1,3,5mm) 2 Slots fo
Introduction Compact Case 1 is the first model of the compact case series. This model is designed for home storage and daily use. It provides a permanent, organized countertop space for your OneBlade handle, standard attachments, and…
stand for the razor and accessories feel free to remix it for other one blade versions
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
KCD2 Wooden Chest for Philips OneBlade 360 Store your treasure! We present to you a wooden storage chest , designed specifically for the Philips OneBlade Kingdom Come II Limited Edition . The chest features a Wood-imitation body with…
BOM: Printed with ROSA3D Starter PLA Black Keep your grooming kit perfectly organized with this custom-designed stand for the original Philips OneBlade shaver. Instead of leaving your shaver and its delicate attachments scattered on the…
Prints best at 0.1 mm resolution to minimize steps on the slope. The design includes through holes for better cleaning with water.
This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
Coffee container extension (Philips 2200 Series)
A stand for the Philips OneBlade and its standard accessories. -OneBlade Holder 2 Blade slots 4 Guard Slots (1,2,3,5mm) 2 Slots for Face and Body guards Printed in PLA at 0.3 using Ender 5 Plus with 30% Cura Lightning Infill Lower infill…
This is a holder for a Philips Norelco shaver / groomer. It comes with a lot of attachments, but just a bag that holds them all, so you have to dig through and find the one you need. The larger guards & blade are across the back, with the…
Fits Gift cards and more! Prints with NO SUPPORTS! High capacity secret stash or gift box. Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Want to sell this? → Grab a commercial license on my Club! Only $20/month cancel…
this is a remix of the OneBlade travel case made by Andres. i just modified the magnet space to fit 4x3 or 4x4 magnets.
At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…
Upon seeing the OralB charger holder with Schuko plug, I wanted to make one for my Sonicare toothbrush. I took inspiration from the OralB charger holders and took some “design advice” from the schuko adapter linked as remixes. V1 was the…
This is a case based on the parametric Rugged Box by Whity, I created an insert that can be slid inside the box. It can carry every blade and comb that came in the original box, the charger has its slot too. There are some additional…
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
A cluttered sink, a dangling charger, a trimmer awkwardly balanced on the edge… sound familiar? This is exactly the kind of daily hassle that inspired me to design this socket-mounted Philips OneBlade holder. Thanks to real-world use and…
The Philips Multigroom 7000 comes with a bunch of heads and guards, which is great. It also comes with a mediocre black pouch to store them in, which is not great. I've designed a number of accessory trays to suit a variety of needs.…
An aesthetically pleasant organiser that fits the (MG7715/65) Trimmer and all its accessories Designed to print super easy, just make sure the bottom is oriented to the print plate.
Have you ever had an issue with RGB strips falling off the back of your TV? Well, so have I. I was also very unhappy with how it bounced off the back of the wall and the lack of even glow around the TV. So, rather than spend an extra…
A box for Philips 7000 series 16 in 1 shaver (MG7736/15), that fits all pieces that come with the shaver. Features: Lid of the box stays upright when open - does not flop down to either side. This can be modified by removing the stops on…
This is a smaller version of the original design that uses less plastic. It features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
A simple and modern stand for your Philips OneBlade. Put it on the sink or on the cabinet in the bathroom. Works great and looks good.
UPDATE : @JesseSchauer_545466 designed an adapter for newer 4100 models - https://www.printables.com/model/924901-sonicare-4100-case-adapter . Give it a try if you have one of those toothbrushes. It's a case for Philips Sonicare electric…
Replacement for the Philips OneBlade Comb in different heights. The original combs tend to break easily and the original replacements from Philips are expensive. I uploaded the stl files for one and two mm height. I've also uploaded the…
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips Hair Clipper? Print yours now. Simply click it on & clip your hair with precision. About Philips Fixables Fixables is a collection of 3D printable…
Customized version of https://www.thingiverse.com/thing:193647 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647 Customizer Parameters type = bolt head_type = countersunk drive_type = phillips…
A holder for the Phillips One Blade Pro and its accessories
3D printable wall mount for Philips Hue Motion sensor , give a little bit wider rotation angles, and allows easy battery changes while keeping the mount aligned to the correct direction. Check out all the mount options . The mount is…
Toothbrush Stand： Electric_toothbrush_holder_single.stl Electric_toothbrush_holder_double.stl Toothbrush wall mount： toothbrush wall mount x1.stl toothbrush wall mount x2.stl Drill two holes on the back of the mount and mounted on the…
Lost the orginial hair clipper guard so i made some in 3D Print with supports in PLA, 0.2 height
PHILIPS One Blade Razor - Minimalistic Travel Case Reason for Model - The reason for the model was for a simple OneBlade case that only carries what I need a OneBlade with a guard for traveling. Features Cap Holder - For keeping your…
My wife asked to design and print this thing for her, so I did. Printed with ABS to be heat resistant. Layer height - 0.2, infill - 5%, 2 walls. Add massive inside and outside brim. No supports needed. Print test ring first to test if it…
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips Hair Clipper? Print yours now. Simply click it on & clip your hair with precision. About Philips Fixables Fixables is a collection of 3D printable…
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips OneBlade? Print yours now. Trim and style your beard, just the way you like it. We listened to your feedback and developed a 5mm version. About…
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
Philips Hue Lightstrips make good TV backlights, but I had trouble mounting them facing directly towards the wall and bending them downwards near the edge of the TV. This simple part helps to hold them in place and keep them flat, while…
I was looking for some proper stand for my new OneBlade. Originally I was inspired by this thing by xenotrim: https://www.thingiverse.com/thing:2986584 Thank you xenotrim! https://www.thingiverse.com/xenotrim/about It was not exactly tha…
KCD2 Helmet Wall Mount for Philips OneBlade 360 Armor up 🪖 We present to you a helmet wall mount , designed specifically for the Philips OneBlade Kingdom Come: Deliverance II Limited Edition . The helmet features a functional holder that…
Clip for Philips Hue LED Lightstrips with hole for countersunk screw.
This is a charging stand for Philips 5000 series (specifically S5582/20) electric shavers. The design uses a sleeve to clamp the cable. Please check that your charger plug is the same as that shown in the image. If it is different, then…
Resolution: 0.1 mm (cca 46 min) or 0.15 mm (cca 26 min)
A 10-inch rack mount for the Philips Hue Bridge. This mount has two versions. One with keystone slots and another without them. I've also included a .3mf file. This model is part of a series of 10-inch rack mounts I've designed. You can…
Since i like to keep everything in place, i made this box for Philips Multigroom 7000 version. It is for 13 peace guard and head version. Shaver itself fits in place perfectly!
This remix will hold a majority of the Philips Multigroom MG7750 accessories. I wanted a tray that would hold both the smaller beard guards as well as the larger hair guards. This was created using @Scatterthought's modular files. I used…
Overview This Philips Sonicare toothbrush holder is designed to allow toothbrush insertion from the top or side. This holder allows toothbrushes to be more easily stored higher on walls, far out of reach from splashing sink water, etc.…
Simple, slim and practical toothbrush holder for Philips Sonicare brush heads. Available with 2,4 or 6 slots to keep your bathroom tidy.
Print, add a piece of waterproof double sided tape, enjoy!
Dies for Philips Pasta Maker Viva HR2333 I have created dies for making different pasta shapes: pappardelle, spaghetti alla chitarra, spirali, tagliatelle, vermicelli. I put the source in CadQuery in case you want to make your own…
For the fixing of the comb and the device itself, we need 5 screws m3x8mm. For attaching the guard holder we need m3x20 or we can use glue. The current files are slightly different from the ones in the picture, I had to do some…
Here are four different mounts for Philips Hue Gradient Ambience Lightstrip. First one is a loose fit and the second one is a much more tighter fit. The other two mounts are the loose fit, but with an 30 or 45 degree angle. These mounts…
OneBlade Stand This stand for the original Philips OneBlade features a place to put the main unit, two additional shaving heads and two attachments. The underside has four cutouts to add rubber feet with a diameter of 6mm and a thickness…
I designed this replacement gear to fix an old Philips D6340 cassette tape recorder, but in the process I've learned that this is a common issue also in some more famous products as Magnavox D8443 or Philips D8444. Probably also other…
Minimalist Philips OneBlade Storage Box A compact and functional storage solution designed to hold one OneBlade handle, two combs, and two blades. Features a simple press-fit closure system for easy access. Printed on my brother’s Prusa…
Philipoemen - Greek General Fixed 1/31/2024 - removed old files. Philopoemen /ˌfɪləˈpiːmən/ ( Greek : Φιλοποίμην Philopoímēn ; 253 BC, Megalopolis – 183 BC, Messene ) was a skilled Greek general and statesman, who was Achaean strategos on…
General: This stand fits 3 replacement blades, and 2 combs. The body pocket is based on my 3d scan of the oneblade, then offset .5mm so it fits perfectly. There is a hole at the bottom of the pocket for charging. Why I designed this: I…
Make of bean holder for Philips printables does not allow non-commercial license org model thing:5401987
Note there is several models mixed into one here also this model https://www.printables.com/model/209006-philips-oneblade I printed mine in PETG 0.4 nozzle 0.3 layerhight with 3 walls and 25% cubic infill Enjoy !
My first design I've put together. I don't have any particular input on printing this, although I did print with supports. Had issues with zig zag supports, switched to lines (~1.5 - 2mm gaps), running horizontal to the front face of the…
0.15 layer height with ironing on every top surface. My print came out as a very close fit for the blade and the upper and lower parts of the container. You may want to play around with the scale of the parts to refine the fit according…
Shaver stand for Philips 3000 series shaver (mine is a model 3333). Print instructions Prints without supports. Optional STL for feet included to raise the stand and allow water to drain underneath it.
As easy as it gets! 3 parts only. 3D-printed parts only. No clipping parts that will eventually break. Large and rounded parts in order to prevent swallowing or injuries. No support needed. The camera can stand on a flat surface, while…
This Shaver Organizer Tray is designed to fit my Philips OneBlade, Braun S9 Pro, Brio Beardscape, Safety Razor, Shaving Brush, Alum Block, etc. You can customize it to fit your shavers and other grooming tools by editing the included easy…
I would recommend raft so it has something to stick to the build plate. Supports: Yes Resolution: 0.1
A stand for the Philips OneBlade and its standard accessories. -OneBlade Holder 2 Blade slots 4 Guard Slots (1,2,3,5mm)
I used countersunk 3x16 Spax screws, but similar sizes should work well, too. Check your light strip version, this one has 14mm width!
This lamp shell is made for LED lamps like Philips Hue that typically works well with frosted glass lamps. It's a work in progress as I would like to make a more stable mount for the lamp socket but as a test it works well. The filament…
I added 4 little bumps to keep the guard secured to the trimmer better, because there is nothing worse than loosing the guard when working in sensible areas.
KCD2 Sword Hilt Stand for Philips OneBlade 360 Blades at the ready ⚔ We present to you a sword-hilt–inspired stand , designed specifically for the Philips OneBlade Kingdom Come: Deliverance II Limited Edition . The model features a…
General description: The oneblade fits into one end and is held in place securely by the cap which snaps into place. A button in the cap allows power button access, and every is printable in a <200mm^3 print volume. I used a 3D scan of…
I design this disk for philips pastamatic, i try with PLA but bad result, the pressure is too high. you can try with nylon or ABS or you can use this model to make a mold. NOW you can customize easily with the original draw fusion 360 file!
Since the PHILIPS Pastamaker is a great food extruder, I wanted to make my cookies with it. Sadly there was no original cookie disc in my area available, so I decided to design my own. It's printed in PET-G, so at least the material is…
Had success printing it in ABS, PETG was to weak and snapped.
NOW AVAILABLE NEW VERSION FOR OneBlade QP45xx/46xx NOVĚ K DISPOZICI VERZE PRO OneBlade QP45xx/46xx EN: PHILIPS OneBlade stand The model was designed with an emphasis on simple and fast printing while ensuring sufficient weight and…
The Philips Hue dimmer switch V2 holder is attached using double-sided adhesive tape Pay attention to the polarity of the magnet, because there are two magnets on the original controller, each of which is turned in the opposite direction.…
Simple tray for Philips Multigroom 7940 that you can change intro travel box or case. You can print whole thing without supports - the only think you can add them is the edge of the snap lock on top cover (support will make dimensions…
I advise you to cut the comb into two parts and print it separately, as in the image below: After printing, you can glue it instantly with super glue. I test it using ABS and PLA to print (just 2 walls, 4 top/bottom and 15% infill). Why…
Philips Sonicare toothbrushes (and the cheap third-party look-alikes) come with only a limited set of four colors for their marker rings. So if you're a family of >4 members, you have to invent other means to discern each family members…
stand for Philips One Blade electric razor with compartments for inserting the three combs of three different sizes plus a compartment for inserting the charger. I printed it at a layer height of 0.28, enabling supports to hold the…
[EN] Replacement filter cap for a Philips vacuum cleaner. Since you can not buy this part extra I reverse engineered it. It works for the dust container ( CP1057 ). The part is suited for: SpeedPro Max XC8043 XC8045 XC8047 XC8049 XC8147…
5mm comb for Philips One Blade. Fits to these models: MG9530, MG9540, MG9552, MG9553, MG9555, MG9710, MG9720, QP1324, QP1924, QP2510, QP2511, QP2520, QP2521, QP2522, QP2530, QP2531, QP2620, QP2630. 3mf file was printed on Bambulab P1S.…
A battery cover for Philips remote. Not sure of the remote name but seems to be BRC0884402/01 Replace Remote Control -VINABTY BRC0884402 01 TV. I use the remote with my philips 50pus6704/12 tv. The design can be improved in multiple…
Travel case Philips - All-in-one trimmer Travel case designed specifically for the Philips Multigroom series, featuring an integrated locking system and optimized storage geometry. Compatibility Philips Multigroom Series 5000/7000 MG59XX,…
Replacement door/lid for the ground coffee hole for the Philips LateGo 1200/2200/3200 series coffee machine. Philips/Saeco part number 421944084601. Recommended print it in ASA/ABS/PETG because of temperature of hot air escaping through…
Philips Hue Outdoor Sensor White Cover Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.15 mm Filament: - - white Custom Section Category: Other
5mm thingamabob for philips one blade
A stand for the Philips OneBlade and its standard accessories. Based on the original model, there are slots for: 2 Blades 4 Guards (1, 2, 3, 5 mm) Face and Body guards Changes Lower height (the skirt provides a safe stand for the shaver)…
This holder is designed with practicality in mind, tailored specifically for the Philips ONE BLADE PRO 360. It keeps your trimmer secure and accessible while adding a clean, organized touch to your grooming space. The holder features a…
A simple travel case for the Philips Sonicare 2100 electric toothbrush. Uses eight 10x3mm magnets.
The 3mf-file has two segments. If printed unaltered it will produce the wall mount in one piece, but by just moving one of the segments a dovetail joint will become visible and the wall mount will be printed as two separate pieces.
Philips Sonicare Toothbrush Holder Toothbrush head holder for two heads made as a charger fixture. Fits Philips Sonicare charger. Simply slide over the top of the charger. Knobs for the toothbrush heads might have to be glued or the stems…
A simple knob replacement for the Philips HD9200 Airfryer. Designed to fit the timer knob, but I think it would also fit the temperature knob. I used a sharpie to put marks at the 10-minute intervals. With the knob installed, the 0-minute…
Holder for Philips Hue Bridge v2 to the SKÅDIS pinwall. Model is very fine and flexible (only 1mm walls). There is no weight to support. I didn't add the locking pins - it's held down by the cabling. Needs supports to print. The supports…
This is a small stand for the Philips OneBlade. I added 3 boxes to the original, to store 3 attachments. The back boxes for the 2 small body attachments (I also inserted 2 replacement blades into them, to save space) The front box is…
