Counting matching models…
A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…
Phillips One Blade Holder with space for accesories
A wall mount for the bathroom cabinet, for example. It fits 2 razor blades and all 4 razor attachment sizes (1mm, 2mm, 3mm, 5mm) v2: -now really wallmountable! with screws -also larger tolerances -2 colour
Here is the Phillips Hue play bar mount that I made for my Hardware needed (per arm) - 2 x M8 Bolts & 2 M8 Tnuts - to bolt to your profile M8 x 40mm bolts and a nut of your choice, I chose wing nuts to be able to adjust them easily if…
a screw driver phillips head. remixed to be more durable
Comb for Phillips QC5115 hair clipper
Long-reach handle for the OneBlade that makes it easy to groom hard-to-reach places! I've wanted something like this for a long time, the current Phillips design challenge was a good inspiration. Fun project, particularly designing the…
You can use 12mm VHB to hold all materials directly to the wall. Custom drawer to snugly fit all OneBlade accessories
Are you tired of having a machine dangling while charging it? or sliding into the sink when you are doing your daily business? Fear no more! This charger mount slides directly on your chargersocket and holds your oneblade secure you can…
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start with Red, then Black. Before you ask, the 66 is supposed to be crooked. Quick Guide…
I recommend adding a bit of foam tape to the shaver department to prevent scratching and rattling. Lid holds (well) with two 4x4 cylindrical magnets. Fusion file is included so you can adjust it to the magnets you have at hand. Btw, I…
I'm heading out of town and wanted to keep all my shaving and trimming gear together. Enjoy!
Custom mount for seamlessly integrating the Philips Hue Play Light Bar into your space as a stylish wall spotlight, effortlessly tethered to the wooden struts in the ceiling. Required Materials: 2x Screws: M3 10mm (DIN 965) 1x Screw for…
Ein Halter für den Phillips One Blade und dessen Zubehör
This is a holder for the Philips All-in-One Trimmer 9000 series. It is designed to work with the Gridfinity system. It has storage built in for one clipper guard and the nose hair attachment. The changer can be used when the trimmer is in…
I have a Phillips Norelco Multigroom 9000 that I purchased from Costco. Unfortunately it didn't come with a nice way of storing the guards for the trimmer and I found they were always scattered all over the place. I built this to store…
This accent light fixture is printed in two parts – a base and a top section. They do not require supports. This accent light fixture is designed specifically to fit a Phillips Hue GU10 LED Smart Bulb. It should also work with other (and…
Screw cap / cover (phillips or flat) press on
Original model fit well with the Hue LED strip, however as I'm using VHB tape did not need the tab for countersunk screw
Modified original, making sides symmetrical. The original has different dimensions on each side. Optimized for Inmotion V10(F) - shorter and narrower. You can freely stretch the width of the model to fit your EUC. You can not stretch the…
No supports are needed. I applied small rubber pads to the bottom of the stand to prevent it from sliding around and prevent it from sitting in potential water on the vanity.
Replacement screw cap for bathroom loo fitting. You may need to trim the tip, depending on how crusty the screws are. Printing parameters : 0.10mm layers for smooth cap print cap upwards per model default orientation supports can be…
From original broken part I modeled spare part of OneBlade attachment
A stylish dock for your Oneblade QP2724 with snap in charging feature - keeps your OneBlade ready for action anytime!
I created this case because I wanted a better looking way to store more trimmer and its accessories. The case has recesses for each accessory and the trimmer as well as a standing feature on the top to hold things in place if the case is…
Just wanted to organize my setup a bit so i took some time to design this.
This model is based on the fantastic Gridfinity Bin with Printable Label by Pred . This has quickly become my go-to bin for organizing my hardware. The labels provided by Pred in the original model are a single object. You can print them…
The internal plastic spring breaks on the Phillips DreamStation BiPAP which causes the door latch for the water chamber to not stay latched. A few screws allows access to the old spring that can be completely removed and replaced with…
Two part holder for dual Phillips Sonicare electric toothbrushes. The two part setup makes it easy to clean and the drainage holes allow any water to drip from the toothbrush into the tray. The one in the pictures was printed in draft…
A phillips 7000 series shaver stand. One day i'll make one with a usb magnetic charger. Till that day this will stand. This seems to be the first of its kind for this “7000 series” shaver. prior generations were “series 7000” so a little…
Updated version here: The design is inspired by the PBSwiss holder, but I didn't like how big it was and I also don't need the giant screwdrivers often so they went in a drawer. The holders have a space for a 3x6mm magnet - It's not…
I used this to build the Digital Sundial http://www.thingiverse.com/thing:1068443 Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Print…
Socket holder gridfinity bin for phillips head no1 to no4, 1/4" drive ratchet. The socket holder uses a gridfinity 1x2 bin. It's made for phillips screw drive no1, no2, no3 and no4. Print it with 10% gyroid infill, no support. You can…
-- English version below -- Vielen Dank Phillip Avery (mein Namensvetter) für dein tolles Design! Ich habe die Steine mit 75% ihrer Originalgröße gedruckt, damit sie einzeln, aber am Stück auf das Druckbett passen. Gedruckt habe ich sie…
Just a simple holder I made to keep the razor guards neat and tidy in my cabinet. There are a few other pockets for a spare blade, Victorinox tweezers and a cleaning brush.
editted version, Phillips Hue are slightly different in shape then normal GU10.
I printed with one plate on a1 mini by just cutting in half then printing. Worked well. 3mf print profile and photo included.
Simple toothbrush stand for Phillips One by Sonicare.
Streamline your tool organization with this tailor-made Philips Bahco screwdriver holder, designed exclusively for the IKEA Skadis pegboard system. This 3D model is engineered for a precise fit, catering to the Bahco screwdriver series…
New toothbrush, new mount needed. Counterbore is for #8 size tapping screw, but I'm sure many will fit.
Remixed to have thicker combs ( + 0.5 mm) .
What; I recently started resin 3D printing and did some research on the harmfulness of 3D printing in general. While some filaments/brands are better than others, it appeared that melting 3D printing in your bedroom might not be such a…
Clip to hold a Phillips Hue Lightstrip Plus. The clip is open at one end and the lightstrip is held in place by a small lip, so that it can be removed or replaced without neding to unscrew the clip.
Clip to hold a Philips Hue Lightstrip Outdoor.
Arrange your toothbrush heads and Phillips Sonicare in a stylish organizer.
La boite de l'article n'était pas protique du tout, j'ai repris un rangement existant mais qui ne permettant pas de mettre tous les sabots et accessoires, je l'ai donc modifié pour ;)
Phillips one blade stand with accessory holders. included f3d files so you can change what ever you want. I'm still learning 3d design software so excuse the mess.
This is a simple enclosure for holding your excess Phillips Respironics Dream Station CPAP Air Filters. This case uses the flexure of the plastic to lock it closed in place with small Detent style bump outs on the internal base. The lid…
Travel box for Phillips Sonicare plus two Curaprox inter-dental brushes and TePe flosser. Box is held together by a set of magnets 9x4.5x1.6mm glued in place. Joints are locked by two stainless steel pins 30mm x diameter 3mm (real…
Bring one of gaming's most notorious characters to life with this incredibly detailed 3D printable figurine that captures every weathered detail and menacing presence. This STL model showcases Trevor in his iconic casual outfit, perfect…
This model is based on the fantastic Gridfinity Bin with Printable Label by Pred . This has quickly become my go-to bin for organizing my hardware. The labels provided by Pred in the original model are a single object. You can print them…
Scanned my Phillips oneblade using my miraco plus. Hopefully this helps someone to design their ideal stand or accessory.
These are redesigned versions of my old holders. I wanted something that was more uniform and looked better being printed. And I wanted them to be easily removed and put back. My old design required me to lift them up before pulling them…
I believe that the part number is 421944040481 ☺️
This fits the Phillips Norelco 9000 Multigroom series wide T-Head trimmer but it may fit others. I've been looking for one for awhile so I decided to modify a regular head and I needed to widen some and remove other combs/fins to make it…
Couldn't find anything close either here or on Thingiverse, This is a stand I designed in Fusion 360 to hold my electric razor with a hole for the charging plug. Hole is designed to be a tight fit so it stays in place. This was designed…
Beard Trimmer Organizer for Philips Multigroom 7000, compatible with other models like the Multigroom 3000 and 5000 that use the same trimming guards. Features snap-in stands to securely hold the guards in place. Printed with a 0.2mm…
Fits over top of a decora switch with some double sided tape and allows a phillips hue dimmer switch to fit over top. There is space for magnets harvested from the stock plate, however it seems to work just as well with a pressure fit.…
Immerse yourself in the thrilling world of MotoGP with my exclusive Wall Art that represents the circuits of the 2024 MotoGP season. This collection features detailed representations of the most iconic circuits from the MotoGP calendar,…
We got a set of Phillips Hue Signe lights and noticed the base was a little wobbly on carpet so I designed a quick little base that you can set the light stand into. It's nice and wide, and has a slot in the back to allow for the cord.
Howard Phillips Lovecraft – Bust This bust represents Howard Phillips Lovecraft , one of the most influential figures in twentieth-century literature and the founder of modern cosmic horror. An American writer born in 1890, Lovecraft…
Upper cover - Grinded beans - Phillips 5400 Coffee machine
LED lamp inspired by the Phillips Hue Gradient Sign, based on the ESP 8266 for connecting to WiFi and Alexa Lampe Led s'inspirant le la lampe Phillips Hue Gradient Signe. À base d'ESP 8266, pour connecter au wifi et à Alexa Matériel…
ENG: A slightly flatter holder for HUE Lightbars. The hole is sized for an M3 Allen screw. To attach just add a few strips of double-sided tape. Printet in PETG ----- GER: Ein etwas flacherer Halter für HUE Lightbars. Das Loch ist für…
Dangly wires and bathroom clutter are a thing of the past with the Modular Outlet Shelf! Instructions Remove the screws from your existing outlet cover, leave the cover in place! Place the 3d printed outlet cover OVER your existing one…
Phillips Hue Switch Cover and adaptor for the V2 dimmer switch. Stop unwanted switching off of your smart globes with this simple push on adaptor and cover. Our place has multiple style/ages of AU switches so check my other makes for one…
Shelf for Philips Sonicare Charger for the Old Model there is a insert
Basic holder for the phillips HUE dimming switch. Designed to fit quite snugly so that my kids cannot lose the remote but you can still access the battery when needed. print standing up for best results, no support needed. you may whish…
Surface mounting brackets for the Phillips Smartbright LED T8 series battens (~26mm wide body). Use PETG or similar for making the brackets flexible enough for the batten to snap-in No supports needed Increase perimeter count until no…
Terrance and Phillip cruising in their Gas Man Mobile.
Received a One Blade shaver for Christmas and was disappointed to see they dont include any sort of holder/case. Quickly made this up the following day to help keep it organized in the medicine cabinet. Pictures above it is printed in…
I have a Phillips shaver and wanted to have a spot to plug it in easily, so I could charge it when I needed to. I made this in Blender before I knew how to use CAD modelling software, but I think I did a pretty good job at getting the…
Phillip Island Circuit, Victoria, Australia, on a stand with it's name. Looks best when separate parts printed in different color filament. If you appreciate my work please consider donating me on Ko-fi . If you have some requests for new…
I modified Paul Fallon's BTR5 case to friction fit on the left side of the Phillips SHP9500 headphones. I made the mount with tight tolerances to snugly hold on to the headphones. When you put it on, you may have to spread the “curls”…
Simple wall mount designed to hold your Phillips Hue Light Bar to the wall. Designed for #10 screws. The tab on top of the slide is added to assist with sliding out the light bar when needed.
Phillips Hue Outdoor Lightstrip Side Mount rather than back mount. This allows you to mount the lightstrip side ways to point the light downwards or upwards. Version 1 allows is open to allow more light and version 2 is a full mount that…
Got tired of my headphones falling down when i tilt my head forward, so i designed this small-ish fix for it. Basically, it reduces the radius of the headband a bit which allows for higher side pressure. With this fix you can look down…
Another version of "Electric toothbrush holder" from Josef Adamcik, improved to be detachable from the wall. Models available for one Phillips Sonicare and one happybrush toothbrush, or both of each. The detachable backplate "prints in…
This adapter allows your Phillips Hue Dimmer switch (2nd generation model with Power / Hue buttons) to fit on top of a Decora light switch. Model for the first gen dimmer can be found here . This provides an ideal solution from a UX…
The floor lamp "Gradient Signe" by Philips Hue stands on a base with a diameter of 11.1cm at a height of 145cm. Even if there are no children in the house, this is very daring. Therefore, I have designed this base, which significantly…
Stylish holder for Phillips One Blade with a combination of a medieval anvil from the well-known game Kingdom Come: Deliverance.
Phillips LatteGo Lid Reinforce at ergo level
Phillips Hue Switch Cover and adaptor for the V1 dimmer switch. Stop unwanted switching off of your smart globes with this simple push on adaptor and cover. Our place has multiple style/ages of AU switches so check my other makes for one…
Anpassung um mit den Phillips Hue RGB/Warm White (1100-1600 lumen Varianten) verwendet werden zu können.
Remix for toothbrush stands for one classic oral B (had make it 2mm lower than the original, because it wouldn't fit otherwise) one oral B iO one phillips sonicare Each one of the holders is a separate part, so in the slice you can easily…
Basic Phillips Head Screw Driver
An adapter to attach a Phillips Hue Play Bar to the back of a Dell P2715Q Monitor. Since the monitor stand already occupies the VESA mount, this slides on top of the stand post. The design uses a dovetail system so you can easily slide…
Richard Phillips Feynman Buste 🇫🇷 Description (Français) Ce buste de Richard Phillips Feynman est inspiré de la photographie la plus populaire du physicien, celle où son regard vif et son expression légèrement espiègle traduisent une…
Toothbrush stand / holder for 1 Phillips Sonicare Recommended to print from PETG (doesn't hate water that much..) Used default slicer settings, no need to modify anything. It can lay flat, or you can add generic silicone feet (from any…
Electric toothbrush holder for one Phillips Sonicare and one happybrush toothbrush. You may need to use custom support ("on buildplate only") because the happybrush opening has a quite long bridge. Leave your comments if it works without…
Affiliate Link (Hue Gu10) : https://link.amazon/B03H3JSlP Printed with PETG and TPU Try out the printed parts if they fit together before mounting Mount the Bracket first put the Buffer Ring onto the bulb corpus put the Bulb with the…
This is a holder for a Phillips Multigroom 7000 series, let met know if youd like another model of PHILLIPS holder or add a make, thanks a lot.
The block surrounding Toronto's City Hall buildings and the NPS Skating Rink. Pulled from Toronto's 3D massing archive use tree supports and feel free to manipulate the model as you wish for a successful print. I tried my best to simplify…
Brackets for Denon soundbar mounting under hanged Phillips TV
Gridfinity holder for Wera 008710 PH #1 x 80mm Kraftform Plus Phillips Screwdriver STEP file available upon request
remixed a model so it can be mounted on the plug of the razor with m3x12 countersunk screws
This is a design to allow the Phillips Hue Lightswitch remote to cover an existing light switch. This prevents people from accidentally turning off smart lights and puts the remote in a spot where it would be expected. The magnets that…
Spare part for water tank Phillips LateGo. Not same as original but fit well. My first model :)
I have made the design a bit stronger and a bit more rounded so it can improve its efficiency.
