Counting matching models…
These are posts designed to hold up a cat hammock. I didn't want to spend the money on a commercial solution when I have a thing maker in my home, and I wasn't satisfied with the solution(s) currently on Printables. Therefore, I designed…
Print approx. €13.05–€15.95 excl. taxPreliminary estimate for one variant
Background The PLAb System We all love our friends at ThorLabs, but sometimes you just need a quick part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. The solution, 3D printable…
I am not a great pinball player but I love it. For my games I have at home I like to set them up to be easier for myself but also for friends that come over and are totally new to pinball. Some games are pretty hard for novices and it's…
These are printable replacements for the body mount posts on the Nikko Evolution and Nikko Super Evolution, the 1:14 and 1:10 scale vehicles respectively in the Evolution lineup. There are two lengths of post I'm aware of, usually with…
Post Cap for 6[in] SQ. Desk Post. The Cap is 5.75[in] Inside Square to give clearance for any deformation in the posts… i.e. bent, twisted, leaning, etc. I printed them with the top on the build plate (i.e. upside down) so no supports…
Bei der Besichtigung des Wagens 905-153 hatten wir den eingebauten Arbeitsplatz vermessen. Bei der Überarbeitung des Modells (Links: H0 , TT ) habe ich den Arbeitsplatz nachgebaut, auch wenn man ihn kaum sehen kann. Zum leichteren…
I am not a great pinball player but I love it. For my games I have at home I like to set them up to be easier for myself but also for friends that come over and are totally new to pinball. Some games are pretty hard for novices and it's…
These are posts designed to hold up a cat hammock. I didn't want to spend the money on a commercial solution when I have a thing maker in my home, and I wasn't satisfied with the solution(s) currently on Printables. Therefore, I designed…
Print approx. €13.05–€15.95 excl. taxPreliminary estimate for one variant
I've printed so many Lego heads and helmets that I need a stand to hold them while I paint them. The posts are undersized on purpose. The neck posts are more snug than the helmets posts. They work for me. Just thought I'd share if anyone…
Support block for scratching posts 1PZ - Diameter 67 mm x 122 mm 1PZ - Diameter 67 mm x 160 mm
This is an electrical fence insulator that can be used on existing fences using T35 poles. The insulator slides on the T35 profile, and can be fixed with a wire using the groove. It should be printed in any material that will support…
Terminal plat to accommodate bigger Ø7mm binding post
Bei der Besichtigung des Wagens 905-153 hatten wir den eingebauten Arbeitsplatz vermessen. Bei der Überarbeitung des Modells (Links: H0 , TT ) habe ich den Arbeitsplatz nachgebaut, auch wenn man ihn kaum sehen kann. Zum leichteren…
Shout out to @TimAngus whom I believe is the maker of this Garmin mount. When slicing you need to separete the individual parts and possition them on the print bed. If you will not do this, it will not work (I correct the stl file later).…
Replacement speaker grill posts for realistic minimus 7W speakers. These are a little wider to avoid rattles.
Needed something to store two vehicules in one Kallax/Expedit shelve. Hardware required : 12x12x1 (mm) metal tubing cut to fit (235mm was ok for the XV01 and V100 but a bit narrow for the BBX and Scorpion) 4 m3 screw Print one master…
Basic body post and loop/magnet body post. Designed for my Vaterra V100 but should work with Losi's ... Category: R/C Vehicles
Made this model to support a ESP version I am sure is the new ESP8266.
I purchased some genuine Axial SCX6 body mounts to go with my Pro-Line Racing Cliffhanger body. The body mounts turned out to be a bag of junk, so I decided to design and print my own mounts instead. I designed these for use with the…
a clip to mount a baseboard to you kitchen furniture posts.
Optical post holder for 12 mm or 1/2 inch diameter optical posts. Thread holes are modeled, compatible with metric M6 threads and bolts. Print with 0.10 mm layer heights for at least where the threads are for best thread hole quality.…
A small ball leveler which can be mounted on a flat surface to accept 20mm diam. posts from this other Printable: Stackable Rods by 3DMason | Download free STL model | Printables.com Includes a locking thumb screw to prevent the pole from…
Das Modell ist unten geschlossen für einen stabileren Aufbau The model is closed at the bottom for a more stable structure Printed on K1C with support standing Gedruckt auf K1C mit Support stehend
I Kept Snapping Rear Body Posts When Racing My Kamtec Mini racer. And Figured They Are something That Could Easily Be Replaced With 3D Printing. The Original Screws Are Used For Securing The Posts I Have Tested The Body Posts On The Rear…
Fixed base compatible with the following 20mm diameter posts: Stackable Rods by 3DMason | Download free STL model | Printables.com
Furniture and post pad. Version 1. Screw-mounted. Podkładka do mebli, słupków. Wersja 1. Przykręcana na wkręt.
Furniture and post pad. Version 2. Screw-mounted. Podkładka do mebli, słupków. Wersja 2. Przykręcana na wkręt.
Furniture and post pad. Version 3. Screw-mounted. Podkładka do mebli, słupków. Wersja 3. Przykręcana na wkręt.
Mailbox Post Cap for US sized posts A very simple and elegant shaped, easy-to-print mailbox post cap to protect the top of wooden mailbox posts from weather. Two screw holes are provided for affixing the model to a post. By default the…
Grab Version #3 - fully printed and shipped straight to your door - from the Dickson Antiques eBay shop! Ships in 1 day, with a generous helping of strawberry bon-bons in every order. Version #3 requires no support structures and features…
DR Yarn Storage Bobbin Posts: Designed to be printed lying down, don't need glue, excessive -Z offset, and prayer
This model is simply 2 different models assembled in Orca Studio. I wanted stackable sanding disc holders, but I always wanted some guiding posts so I could press the sander down onto the discs and end up with aligned vents. For this…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker The capsule is large enough for a couple of house keys and…
This is a custom body post designed for the K989 RC car. The front and rear body posts are slightly different to accommodate the front shocks. They are designed to be used with a neodymium magnet with a diameter of 10mm and a height of…
This model allows increased stering angle, like the previous model, but has sturdier geometry. It includes new steering post stays which use 19808016 steering posts, which reduce play in the steering system. The steering arms are now 1mm…
These use 1/4"X1.5" Carrage Bolts. Run the carriage bolt through a couple times to get the threads cut. Mount onto a 20"X24" screen the following way side-reg-postsside-reg-posts - 3" in from outside edge Center-reg-postCenter-reg-post -…
ZD Racing Pirates 3 body posts (mounts) for 1/8 Pro-Line BullDog Body No support. TPU 95A, 60D
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This model is a replacement part for the Arrma Vorteks Body posts, includes Fusion 360 models and sliced gcode for CoreOne and Mk3S. AR320357
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Added 'want_post' parameter to generate holder separated from alignment posts, and increase height to 130mm to suit my printer's need. Measure your printer's X carriage height after homing and add about 10mm for clearance. You won't need…
When hauling camping gear in my Overmont wagon, I found some bulky items won't fit and want to roll out. The answer is to extend the corners of the wagon like a logging truck's fence spikes , or add tie-down points . The wagon's fabric…
I was am not using HSW, but I do have a wooden workbench and some woodscrews. I upped the hole size and added an additional one so I could stop it from spinning.
You can build your own customizable robot maze with these corner posts. These small posts can connect foam core board walls into different configurations to create a robot maze for your robot to navigate.
This rotational hook aims to bring new functionality to otherwise often unused parts of our homes and workshops. As stairs typically have vertical posts and are often located near an entrance, I see an opportunity to improve the…
The post needs to be printed 4 times and attached to the base plate and the droid's base. This part holds the mast in position.
Eine Abdeckung/Abdeckkappe für Zaunpfosten 67x67mm (Innenmaß)
I created these sleeves for Vevor cable railing posts. The posts didn't come with any metal sleeves, the holes (0.31"/7.8mm) are not standard size and the posts are an unusual dimension of 1 by 2 inches (the standard seems to be 2 by 2),…
I printed in PETG green marble, .45mm nozzle 0.2mm layer heights .42 layer width 8% infill and 3 layers thick Works like a dream! Though I wouldn't recommend putting them out on the ash tray.
This is a remix of the awesome phone tripod by LoboCNC. I have added two variations of longer tripod posts. - The 148mm post is 40mm longer than the original. - The 198mm post is 90mm longer than the original (intended for holding the…
A unique 3D printable creation — this Ho Scale Whistle Warning Posts, W Posts, Set Of 8, Trackside Markers, Ho 1-87 Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
Love this design, but my studs had much bigger bases. Increased the hole sizes to 6mm, but forgot my tolerances. This does mean if you have 6mm studs that it'll be a tight fit, but I used a pair of pliers to force them in. Although a bit…
Simple and easy to print toy miniature fence models. Long and short variants of the fence and a semi-circular gateway are available. A connector ring model is also provided for extra stability for adjacent pieces. The rings can be…
Simple, easy‑to‑print miniature fence pieces designed for toys and tabletop builds. Each section features circular vertical posts that allow smooth rotation. The set includes long, short, and very short fence variants, along with two gate…
I've printed so many Lego heads and helmets that I need a stand to hold them while I paint them. The posts are undersized on purpose. The neck posts are more snug than the helmets posts. They work for me. Just thought I'd share if anyone…
Insert the vinyl fence rails or pre-assembled panels into the installed posts. Secure each rail connection using the 3D printed Rail Tie/Lock designed for 5-inch posts. Slide the square plate over the end of the rail, align the central…
I made this for the GF's fairy garden. Originally to cover a well she made from clay, but it's handy for all sorts of things. It can be stretched along the long axis, scaled, etc.for a variety of uses. The top edges are chamfered at 45…
This part slots into the lower member of the rear triangle (as seen in the picture) and is held in place by a cable tie. The cable tie is non-load bearing. Should fit all 16“ Bromptons, allthough ive only tried it on my brompton from the…
This upgraded SC7 body post design is built to be virtually indestructible. By reinforcing the post with a through-bolt and replacing traditional body clips with a robust screw-on nut, it can handle the hardest tumbles without snapping or…
Body Post adapter for Xray #301323 body post to fit Tamiya TT-02 Type S Shock Tower. Should fit neatly into the Type S Shock Tower. The hexagonal recess allows the #301323 body post to fit snugly to enable rearward facing body posts for…
Modelled at full scale - ready for you to scale to the needs of your layout. Image credits: Infrabel Print Settings Printer Brand: Creality Printer: LD-001 Rafts: Doesn't Matter Supports: Yes Resolution: 0.02 Filament: Anycubic Standard…
I remixed Bmays AirBlade Assault 130 shield with angled micro camera mount (original shield by airbladeuav). All I did was removing most of the shield leaving only front plate with posts. If You use this mount, You'll need one 25mm spacer…
I didn't want to have to think as much about alignment when putting the model together so I added some registration posts/holes. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill:…
Replacement front and rear body posts for the FTX Bugsta RC Buggy. I know the Carnage has the same part but I am not sure that the holes are in the same place, looks the same chassis but I do not have one to test, perhaps someone could…
The little posts on the covered doorway just didn't print well for me: they kept being knocked over. So, I cut them out and replaced them with angled supports instead.
This is the 3rd iteration of this cord wrapping widget for use with my kid's skadis technology ‘drop zone’ My goal was to make something that was easy and fun enough for them to use without my help. we will see how that goes… Print…
Looks like there's many different revisions of the C64 breadbin rear snaps/hinges. I wanted a version of banman's design that fit between the vertical supports of my machine, as I'd prefer to limit grinding and modifications to the case.…
Body posts for Tamiya DT-03 Neo Fighter / Racing Fighter I added the original length and a shortened version that fits perfectly for the Neo/Racing Fighter. --- Karrosseriehalter für Tamiya DT-03 Neo Fighter / Racing Fighter Ich habe die…
Traffic posts: To print a 750mm high traffic post you require: Qty. 1 Cap Qty. 2 Joiners Qty. 2 Posts Qty 1. Base post twistable Qty. 1 Base You will also need some glue and 50mm reflective tape. Recess in the posts for the reflective tape.
This base is to fit on miniature scale lamp posts commonly ordered from China. Includes channels for wires in the bottom
Screw in post for keeping my wooden framed windows open/closed. Two types are just different screw hole locations.
RC10 Gold Pan Servo Mounts These are very simple but necessary. They replace Associated part Number 6366. NOTE: The originals required the use of 2 washers under the rear servo mount. See the attached picture from the RC10 Manual. To…
Standard R/C Server Mount Posts These are simple Standard size Servo Mounts for custom applications. Useful for Pan Cars, Crawlers, Robots, or whatever. I made them for my RC10, and have used them on a Crawler as well. They have a hole in…
Most laptops manufactured today use a brass grommet that is pressed into a plastic post to mount the screen hinges. Eventually this plastic will get brittle and break. Most of the time this involves replacing the palm rest. However, the…
This sleeve was designed for a 2011 BMC RM01 seatpost, but fits most D-shaped BMC seatposts of that era. The main purpose of the sleeve is to prevent the bike from twisting in the clamp of a workstand due to the D-shape of the seatpost.…
Designed this to fit a 15.5mm OD pneumatic die grinder onto a CXA tool post on our Trak lathe. Holes are sized to fit 10-32 heat set inserts.
I designed these to easily find the CG of my Flite Test Legacy V2. The Legacy V2 has two holes in the wing to support the plane to find the CG. Designed in three parts, print two of each then glue together. The clearances are a little…
A collection of screw posts / pegs for M3 screws. If you need a quick way to make mounting points in your own designs. These come in Round, Half-Round, & Square options, in *20, *16, *12, *8, *6, & *4 length. If you would like different…
Replacement body posts for Kyosho Mad Crusher VE. The front and rear versions are thicker and have no holes up to where the cross brace installs. The full version has a full set of 8 holes like the originals. I printed mine in nylon for…
Body post for Robak 2 RC, also played around with post you can add a magnet to hold the body with but I have not tested it yet. Will need two M3x8 and washers to mount the post.
I'm sick of buying terminal blocks for $2.5 each. It's time to make my own. You will need: 6x M2 bolts (around 8mm) 6x M2 nuts (they will slide into the square cutouts and be used to tension the bolts against the wire) The holes are 2mm…
Short body posts to fit wider range of bodies. STEP file included. Needed shorter body posts but didn't want to cut the original ones. Best printed lying down with supports, 0.12mm layer height preferred. Should fit with minimal post…
Link to modified Onshape model Link to original model by mothdotmonster I only modified the 4 posts to be smaller to fit my board. They appear to be 2.5mm and my board was able to fit.
Here is my Boba Fresh/Re Armoured/Post Sarlacc Helmet. It's designed on the Side show helmet with the smaller turn signals. It is sized quite small at 100% so i'd suggest going to 103-105 for a normal sized head and 108 for larger sized…
I've remixed the existing solution for Spool hanger to use it with cheap wood posts. wood used is: 60 x 30 mm, Length: 2000 mm (2m). my setup is to use 3 hanger (one each side and one in the middle) Printed for extra strengths: PETG n0,4…
I really loved this hotrod body Open RC truggy HOT ROD body (for testing!) by mochr | Download free STL model | Printables.com Made by @mochr And i wanted it for my cramer truggy, so i made som body posts for it. I made them out of TPU so…
Optic post holder for the use with 14 mm posts. The hole on the bottom is made for a M6 heat insert. The hole on the side is made for a short M6 heat insert.
Optic post holder for the use with 14 mm posts. The holes at the bottom are made for 5 mm diameter magnets The hole on the side is made for a short M6 heat insert.
If you've ever gone to replace your lane guide plastics or the metal guides under them (check out Cliffy's replacements if you haven't yet: www.passionforpinball.com), then you've probably fought to remove the riveted-in supports so you…
Models Two models are included, one with cylindrical prongs and one without. If your post does not have appropriate holes to mate with the four prongs on the under side, choose the “No prongs” model. The post extrusion profile that works…
I had some issues with the posts warping when adding the inserts and then shearing off when screwing in the screws. I remixed the top case to make the posts thicker 7mm → 10mm and added a slight chamfer for easier insertion.
I just needed one of the middle panels to be longer this one is 210mm in length from 160mm, height still 110mm // original: Cat Fence 160x110 - 8mm
This is a pair of replacement hinge posts (upper and lower) for a glass bath screen, complete with a fully parametric OpenSCAD script so that it can be tailored in case the design suits other models. The lower hinge post broke when the…
Needed something to store two vehicules in one Kallax/Expedit shelve. Hardware required : 12x12x1 (mm) metal tubing cut to fit (235mm was ok for the XV01 and V100 but a bit narrow for the BBX and Scorpion) 4 m3 screw Print one master…
These a very specific pieces for SciFi Terrain Building I needed posts that hold 3mm thick acrylic glass and i wanted these acrylglas pieces to be 2cm high so i created some in FreeCAD. If you also have a very specific need for such…
Tractor Supply sells lots of fence posting for creating welded-wire fences (for around animal enclosures). So we needed to make a new fence for our goats. One of whom keeps going over the fence, so we needed to add an electric fence to…
