Counting matching models…
Hey Guys, Here are my Creality K1/ K1C/ K1 Max/ Orca Slicer , Quality, Speed, and Stealth Profiles for 0.4 Tested on K1, K1 Max, K1C Hotends. (Standard, CHT, Unicorn) If you are using the RetroGlide Gantry Mod You can find my latest…
This is my profile for the K1 Max in OrcaSlicer. It contains the printer config, 2 printing profiles and a material profile for the included HyperPLA. Also included are a model for the build plate along with the texture image, see below…
Please give it a 💖 if you like it 🥰 Edit 2024-07-28 : Flavor updated Edit 2024-07-13 : Added a “Quality Profile” Added the thumbnails to preview models on the printer 👉 Link to my Ender 3 V3 SE Profile 👉 Link to my Ender 3 V3 Profile 👉 My…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 Profile 👉 My other Slicer Profiles & Models Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 32 minutes…
This Projet is WORK IN PROGRESS If you like this project, take a moment to buy me a virtual coffee … To install the texture and printer silhoutte in PrusaSlicer, go to: Settings → Printer Settings → General → Bed shape → “Set…” Load the…
Please give it a 💖 if you like it 🥰 Edit 2024-08-29 : Import error of the Ender 3 V3 Plus for Cura solved Edit 2024-07-28 : Added a “Quality Profile” Added the Ender 3 V3 Plus 👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 SE…
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
This is a simple easy to print design to convert an Ikea Skadis into a freestanding pegboard. The feet attach to the board using the supplied Ikea hardware. I've uploaded two designs: one with space for an M4 hex nut, and another which…
Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…
Hello, I've created a low-profile bracket for this annoying 25mm fan. This is the second version of the bracket. I'm sharing the model now because I finally received new fans and was able to properly test its performance and it works as…
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
How to setup the profile: Go to File → Import → Import Config Bundle and select the .ini file. Download this program and go to Print Settings → Output options and replace “thumbnail-path-here” with the path of the program you downloaded…
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) The Low Profile Wall Mount is a compact and durable mounting system designed for quick and clean installations. The mount features a…
For the person who asked for dialed in settings for Sunlu, these are the ones I use. Hope they are useful for you all.
This printer profile is a copy of the profile from Bambu Studio (01.02.00.09), with the placeholders and variables adjusted to fit the PrusaSlicer style rather than the Bambu Studio style. The linear advance (flow calibration) is not…
These are an alternative clip for @LineArcLine's excellent Skadis T-Clip System. This version shortens the clip so that it does not protrude beyond its mounting recess and will not interfere with anything in front of it. Both painted and…
This is a keycap for the low profile Cherry MX1B-L2NA switch. It prints perfectly on a Prusa Mini with 0.15 mm layer height. The keycap is easy to put on, doesn't fall off and is still easy to take off. Created this basic keycap in…
Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…
**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…
All parts created with solidworks aand rendered with solidworks visualize. You can simply resize the parts and use it
Hi, I was struggling to get a working profile under Orca Slicer until they added a base profile for the V3 SE. However, it still did not lay down a proper initial layer and when it did it stopped extruding from layer 2 onwards. I think…
Hi everyone, since official profiles for the Anycubic Kobra 2 Pro are not available for OrcaSlicer, I created one based on the official profiles that Anycubic made for PrusaSlicer with a couple of improvements such as easier to remove…
These are T-Nuts for the common 20x20mm Aluminium Extrusion profiles many printers are made of. I designed them for my Profore Original 3D-Printer to attach things like cable clamps etc. While designing, I learnt that the profiles look…
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
Here's a basic keycap set I made for my K95, but will likely be compatible with any Cherry MX based key switch. Includes all keycap sizes as individual files - feel free to mix and match to create your own colour set. The keys feel good…
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
This is a simple battery holder for Bosch Professional 18V batteries that you screw on a wall. I tried to use as less filament as possible. It is still interlockable, meaning you can add as many holders that you need next to each other…
UPDATED profiles for OrcaSlicer 1.9 and up. ( Download the slicer here ) Sharing some 0.4 and 0.6 profiles for the Flsun V400 using OrcaSlicer. Files are for Vanilla Klipper or Flsun Klipper (only difference is the Start and End gcodes).…
Anycubic Kobra 2 Max Profile for Orca Slicer Manually copied the settings of the K2M Prusa profile into the default Orca Slicer Kobra 2 profile. Maybe something can be optimized, but it's working fine! Also added a found bed stl file.…
Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…
These feet here are designed for all printers, which are using V-Slot 4040 extrusions as frame. So if these feet are working with your printer, and your printer is not listed yet, please tell me, so I can add the printer to the list.…
This is a port of https://www.thingiverse.com/thing:2503622 , by mightynozzle. I do not claim ownership of the model . I had a hard time finding something like it on printables, so I ported it here. The following text is taken straight…
This profile is the V2 of my previous profile that offers fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic…
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
Collection of screws extruded aluminum profile including : 20x20, 40x20, 30x30, 60x30, 40x40, 40x40L, 80x40, 80x80, 80x80L L = Light Weight
Updates 03/2022: Changed two screw holes on the switch side part to slotted holes (v2.1). This allows you to tune the fit and tension during assembly. 04/2021: Added a "MIRRORED" version, which allows you to flip the PSU around and have…
Y'all know that FDM printers are not ideal for printing minis but hey, it's possible, and you can get pretty damn good prints if you tune it correctly. Main things I've noticed made a difference were : Layer Height, of course The printing…
since the original cap was way to high for me needs, i made it low profile, but this did not distribute the water well enough, and it tended to splash on one side - so i added this “knob” in the middle, that solved this issue prints with…
Here are the Orca Profiles that I setup to get quality but quick prints
This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…
This is my Orca Slicer profiles for my Anycubic Kobra 2 Neo. PLA Filament profile included (Sets the bed to 45 degrees). I took the PrusaSlicer profile and converted it to Orca Slicer. If it helps please consider leaving a review and a…
This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…
This is the profile I have made for my Anycubic Kobra 2Pro with Prusa slicer based on many experiments and 3d model testing. and I got some amazing results. Well, lately I got down the rabbit hole of tuning, tweaking, and upgrading my 3d…
Please give it a 💖 if you like it 🥰 🪧 My 8 colors Splitter for Kobra 3 👉 https://www.printables.com/model/1019258-8-colors-on-anycubic-kobra-3-combo-splitter-for-8 Please leave a comment if you have any possible improvements to make to…
Prusa Slicer Profiles for Creality K1 and K1 max The model is just there, cause I needed one to upload the Profiles. Can ignore it. There are two config files. load both Included : - PLA high flow Material Profile (Custom Gcode Added for…
What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…
This is a Remix of the knob COVER for the X / Y axis belt tensioner on your Ender 3v2 and others using the same OEM blue knob. ❤ Get your Prusameters… Post your Makes! ❤ You can find my other matching knobs here: Drawer Knob:…
01/12/23, Added Updated .3mf. Bambu Studio settings tuned for eSUN PETG with first layer height and temperatures to suit Wham Bam PEX. Also works just as well with textured plate. After loading the .3mf there is setting changes in all 3…
Don't forget to hit the like button if this helps you :) The included prints are simple validations to run after applying these instructions and the result should look something like the posted photos. If it does not and it has…
After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1. I tweaked the profile with a few test prints, and i find the results better than Cura. It should be a good starting point for anyone trying…
This profile prioritizes fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic results that I have without…
Do you need a tool to smooth silicone around pipes to seal any leaks? Or after installing a sanitary fixture? This is the tool you were looking for. This tool features a handle for a comfortable grip and various spatulas with the main…
Attention: I take no responsibility for damage to your printers These profiles were created from base BambuStudio. The use is as good as BambuStudio only faster and better features! There are 2 presets: 1. P1P w Bed Leveling 2. P1P…
2020 Extruded Aluminum - Profiles Collection - Parametrico/Parametric - Adjust the Z scale to obtain longer profiles Available in 5 variants: 2020 4 Sides Open 2020 1 Sides Open 2020 2 Sides Open (90°) 2020 2 Sides Open (180°) 2020 3…
Very fast and good quality profile for the ender 3 v3 se printer. Currently, it is based on Klipper firmware, if you use marlin, remember to modify any gcode and printer settings.
These Packout low-profile organizer labels are inspired buy Dan Winciker’s Milwaukee Low Profile Packout Bit Set Label thing on Thingiverse. I have re-modeled the labels in openSCAD so that you can customize the text on the label and…
1 Setup The FLSun SuperRacer is not official supported in the PrusaSlicer software. So we need add our own printer or use a similar to start with. Let's go! 1.1 Initial printer setup We start the PrusaSlicer and then from the…
This is a complete pack of T-nuts designed for the assembly of 2020 aluminium profiles. This pack contains a variety of T-nuts for different applications. There are T-nuts for different sizes of screws, and there are T-nuts with…
v0 of my low profile mic arm. I wanted a low profile arm because I'm having multiple screens and this is the most convenient solution. I also wanted a fully printable solution, no external piece needed. All axes are working well, you will…
Tag me if you printed~~~!!! Twitter https://twitter.com/YuTR0N
Ender 3 and 3v2 or others using same motor. This is my X-Large version Extruder Motor Knob. ❤ Get your Prusameters… Post your Makes! ❤ You can find my other matching knobs here: Drawer Knob:…
I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use…
This is a remix from Onelostcause ; original model found here . The original model is great for holding any standard/generic straight handled deburring tool. I wanted to incorporate blade storage while still retaining the ability to stack…
To add a profile for a specific printer, adjust the table dimensions and axis height according to the model, and then customize the profile according to personal preferences. PLEASE PROVIDE FEEDBACK ON HOW THE FILES WERE HANDLED AND A…
Magnetic Bit holders for the trays that come with the Milwaukee slim low profile packout compact organizers. Uses 6x2mm magnets https://www.amazon.com/dp/B07KJ9H31P?psc=1&ref=ppx_yo2ov_dt_b_product_details Super glue the magnets on the…
Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…
Did not want to uselessly buy corner brackets, these ones are exceptionally strong (especially since they are printed with 4 walls). I am using mine for my DIY 2020 system laser cutter. I have found that w/ 4 walls, these make a PERFECT…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
Obsolete ! Available by default in Orcaslicer since version 2.0 These are my OrcaSlicer profiles for Ender 3 S1 Plus with Klipper Firmware. They aren't perfect but the quality is good enought to me. The 3 files are for a printer profil, a…
Updated 1/25/23 I have programmed better cura profiles for the FLSun V400 printer. i am currently needing beta testers to help tweak the default parameters of these profiles Please stay up to date on changes and updates at the GitHub…
G17 rail to Picatinny adapter, for when you want to fit a pic rail only item or mount. Gives you 5 slots. Made it as low-profile as possible while still maintaining the correct picatinny dimensions. Fitted for Gen 4, haven't tried on…
Simple as the title, just a Cura profile for this machine. The cuality its estandar, but you can change if you like more detail. Ironing is activated to achive smoth surfaces. Small changes on supports but I don't use it a lot so its…
This DIN rail clip has a pull tab to release it from the rail. A flathead screwdriver or Allen wrench can be used to pry/hook and pull the tab. Spacing between holes is 31mm. Triangle symbol on the clip shows correct orientation with the…
Für alle deutschen Nutzer habe ich hier noch ein Video gemacht, wie ich einen Unterbau für meinen neuen 3D Drucker erstellt und gebaut habe. Vielelicht inspiriert es ja den ein oder anderen. For all english users, the following youtube…
The standard Prusa i3 MK3 spool holder is almost totally vertical which makes it take up the most possible space in the height direction. I had a height restriction due to the shelf my printer was going to sit on, so I designed this as a…
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
I have used this profile for big and small prints so its safe and tested you can see the result from this profile on my instagram page https://www.instagram.com/smotech3d/ ! The only think you need is to level your bed your correct and…
I recently did some cable management on a RatRig V-Core 3 and found myself in search for a minimalistic solution to keep cables within common 3030 profiles. There were no models to my liking so I designed one. Consider exporting your own…
2020 2-Way 90° Corner Profile Connector Update 04/05/2025: added RV1 Geometries clean-up, fit tolerances for smoother assembly Suitable for: ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile…
I saw that nobody made any low profile squashball feet for prusa mini so i did. The design is inspired by some other creators, with my own spin. Legs are push to fit, so no screws or bolts needed. i recommend printing 4 feet total for…
EDIT: I designed the regular height organizer square bin as well. EDIT2: And the regular height rectangular bin. EDIT3: And I designed a divided regular height rectangular bin with removable dividers as well. EDIT4: Added center bins that…
For a lot of helpful details/info please consult the main Teaching Tech listing here: https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix This final assembly video explains all about my remixes in this set:…
These are the settings I currently use for my Kobra 2 Neo with OrcaSlicer, I will try to update them if I find any good tweaks. In order to use them: -Printer: Kobra 2 Neo V1 -Filament: Any / make your own -Process: Use the processes that…
You can Import my SOVOL SV07 Profile to print fast and with the external fan. The only part I copied from Makersmuse was the start of the external fan. When you create a profile for PETG you should remove the external fan cooling and…
This design is now open for remixes, please give attribution and link your remixes to this page! I'm happy to link back to remixes or add them on this page to keep everything in one place. Update 31 December 2024: Added a shell option for…
Latest Update on 10/18/24: For latest profile use - Folder: ORCA Profile Creality CR 10 SE_Enhanced_10_18_24. Check out Screenshots for performance results. I have created and extensively tested these profiles. It has given great results…
Also available on GitHub How to use Download the latest 'KingroonX.X.X.zip' file. Extract the ZIP and move the 'Kingroon.idx' & 'Kingroon.ini' files and the 'Kingroon' folder to: \Prusa3D\PrusaSlicer\resources\profiles * 'Kingroon' should…
Drill guide that can be securely fastened to 2020/3030 aluminum profiles. Durability is enhanced by using metal pipes together. The STL files are designed for 5mm and 7mm drill holes , but the hole sizes can be customized by using the…
HOW TO INSTALL PROFILES NEW UPDATE 22.11.25 Petg-hs profile added. NEW UPDATE V1.5.1 19/08-25 - First layer fan turned off, Gcode for bed mesh profile have been added NEW UPDATE V1.5.3 26.09.25 - Changes to support settings, Zhop and…
EN: I have almost 4m long and 50cm tall honeycomb storage wall. My idea was to create nice LED strip profile for it. And here is it. It will take long time to finish it, but I would say it looks already perfect. Diffusor is standard one…
I generated these key caps using the wonderful KeyV2 library . They are designed in a way which allows them to easily snap into the cross-shaped stem of low profile Kailh switches. I used 0.2mm layer height, a 0.4mm nozzle and printed…
Update 8/27: Adding Orcaslicer klipper speed profiles. Adding Orcaslicer printer profile and slicing profiles to this for max speed benchy (25:52 benchy) without sacrificing quality, and a general profile for normal detailed prints that I…
*EDIT Some people ding the design to not fit exacly from what i found out not all 40x40/80x80 frames are exacly those dimensions i based the design on a Simlab frame. I took over my sim rig from a friend, but it was missing a few end caps…
This is a low-profile microphone arm that swivels underneath a monitor to save space. I've been using this for over 3 months, and it's been rock-solid. Fully 3D printed with no supports! All printed hardware can be swapped with M10 x 30mm…
🚨 Latest version will always be found on the OSS Klipper Configuration repo. These config bundles can be imported into SS and PS. Printers SV06/Plus SV07/Plus Features Printer profiles. The best print settings in the universe (yes, even…
2020 3Ways Connector CUBE Corner Bracket for ITEM 2020 Profile Available in two versions: Blank M4 Treaded Suitable for: https://www.item24.com/en-il/profile-5-20x20-natural-37003#description All our designs are free to download and use.…
![[FAST] Orca slicer profile for ender 3 v3 se](https://media.printables.com/media/prints/960857/images/7338894_a5ed72e0-36b1-415d-b77f-674c59c58e92_43e5ce64-7151-4836-87ae-c3d58e2c80ce/banner-orca-slicer.webp)
