Counting matching models…
0.25mm nozzle, 0.07mm layers, the pogopins have 1mm max diameter. In this particular case it's actually for reading back the flash and reverse-engineering the firmware (assuming it's not encrypted but I doubt it is). Fusion link…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Enclosure for Programmer AVR compatible with USBasp ISP. The enclosure consists of two parts. M2 nuts should be placed in the bottom part. Both parts are screwed together using 8mm long M2 screws.
2026 July 8 Most recent code is at https://codeberg.org/dr_a_gon/foam_dart_blasters Code here still works, just older. Version 5.1 Added flyback diodes. New Version 5 Updated 2026 May - Single trigger, computer controlled flywheels &…
Need a way to keep all the Programming Cables for my Ham Radios better organized instead of bundled up in a drawer. There is a slight upward angle when mounted; Can use screws or sticky tape.
The Märklin mfx decoder programmer 60971 and its decoder adapters and decoder tester come out of the box as PCBs with wobbly connectors. Therefore I designed cases with the following features: a case for the MTC21 / NEM652 decoder adapter…
Update: Added Grid 3x3 Perforated model. (Function the same as Grid 3x3 but prints faster) Note: Feel free to contact me directly or leave a comment if you have any feedback or request. Introduction Noticed the lack of physical learning…
Disclaimer : Use at Your Own Risk ! Using and/or working with/on 110-230 voltages or device(s) can be deathly and/or cause fire. It is not worth the risk to yourself, your family and your home if you don't know exactly what you are doing.…
Christmas tree ornaments, based on different programming language (and generic “tech") logos. Designed in Haskell using Waterfall-CAD , source code on Github, here . The stls don't use very consistent scale factors, and you may need to…
I am very happy with an app "HotKeyBind" which allows me to individually program function keys with my favourite actions. Here some examples: Shift+F1 adds a date to a filename. I store “2023-02-12 (1) ” in key F1, so a file is renamed to…
A sleek, minimalist keychain featuring the classic </> coding symbol. It’s the perfect everyday carry for software developers, web designers, and tech enthusiasts. The model is perfectly flat and requires no supports. It is highly…
Arduino-Programmierstation-Atmega328-Attiny85 Arduino Programmierstation Atmega328 & Attiny85 Hier ist der Link zu den Platinen: https://www.pcbway.com/project/shareproject/Arduino_Programmierstation_Atmega328_Attiny85_442d283b.html Und…
From the war on where to put your opening parenthesis to pointing the (git) blame on others, here are some fun signs that will make you or the developer in your life smile. Printing and Assembly Let the print cool completely before…
Celebrate your love for Python with this stylish 3D-printed keychain! Perfect for developers, data scientists, and tech enthusiasts who want to carry their favorite programming language everywhere. Features: Iconic Python logo design…
I made these keyrings myself in Fusion 360 but the logos are probably copyright and I don't own them: React C++ C CSS HTML Javascript Python Rust Swift SQL Kotlin Ruby VS Code Lua R PHP V Golang Typescript Java There is a COMBINED 3mf…
These are some keychains for popular programming languages! Would be highly appreciated if you upload makes. Additionally, if you would like a keychain of a name, logo, image, etc. then drop it in the comments and I'll design it for you!
A simple holder, to quickly connect a ISP-Programmer to a custom PCB via 2x3 Pogo pins. The pins have 2.54mm spacing and the wires are soldered directly to the Pins. the overhang has a angle of 45 degrees, to keep it printable without…
The housing developed for programmable logic controllers is a practical and efficient solution for those seeking to integrate automated control in various applications. Click in the link below and access all files for download in PCBWay…
The simple “Hello World” program has been used for decades by developers as a way to test basic syntax and get a quick visual result to show that things are up and running. Proudly display this simple statement to remind you of where it…
This is a 3d-printed pogo-pin programming jig for Tomu ( https://tomu.im/ ), a tiny USB device. Normally you can use the built-in USB bootloader to reprogram it, but in the cases where you can't, having a jig to align the SWD programming…
AVR ISP Programming Board case 28pins ZIF socket is 2.54mm step, 15.24 mm between pins rows Empty pads are for ATtiny85 EIAJ ZIF socket https://app.box.com/s/913ihy23mmxu5hemftgme2fgq0jbtyng Category: Electronics
This is a minimalistic adapter thing to flash those sp111 with little effort. I mean yes I had to soldered a bit at the pogo pins but this was much simpler than trying to get the PCB out or solder in the housing. An advantage here is that…
ICSP Clamp for microchip programming
This is a base for the Cortex EFM32 Leopard Gecko programmer. I made it to secure the board so the bottom of the circuit board wouldn't come into contact with metal things on my workbench. I don't need a top for it yet, but maybe in the…
The bracket is used to mount the programming device on the locking cylinder, as programming and reading it sometimes takes a very long time
This frame is not simply a decorative object. It embodies the result of meticulous and passionate work. Every detail, from the choice of colors to the care in modeling, reflects the commitment and love for art from its creator.
Box for the Pololu USB AVR Programmer. Instructions Print and place Pololu USB AVR programmer inside. :) Category: Other
Universal Interactive Statue Base This base turns a regular 3D printed statue into a programmable control device. By tilting the statue, the internal microswitch can trigger actions such as turning on a 3D printer or controlling other…
To build this interface You will need some cheap element: One USB-C to TTL interface : https://pl.aliexpress.com/item/1005008104567290.html?spm=a2g0o.order_list.order_list_main.28.7daa1c24NlzL2N&gatewayAdapt=glo2pol Three 5,5 mm long pogo…
This is a box to contain a MAP programming widget box. It is a very simple box with access to the board's ports and the reset button. A snap lid and pins hold the board in place.
This part seem to get lost since i had my Data I/O 29B programmer Open for Firmware Update I figured I would Model. I Have tested this in 3 Different Data I/O 29B's and it fit all good. I left screw hole a little small as i seen 2…
Holds RFID sticker with a diameter of 25mm. Just programm them with an App that is compatible with your printer.
A keychain with code snippets to display “Hello, World!” in the terminal in 5 different programming languages, those being Python, Java, C#, C++, and Rust. It is 8 by 8 cm, has rounded edges and a rounded slot for a keychain. The body is…
Project Description : this project is a compact 3x3 programmable keypad based on an Arduino-compatible microcontroller. It allows the user to assign custom functions or keyboard shortcuts to each button, making repetitive tasks faster and…
Introduction This is an enclosure for the SEGA8 Programmer , a cart programmer and dumper supporting original carts for SEGA Master System and Game Gear consoles, and also flash based carts such as: FrugalMapper FrugalMapper Compact The…
Case for VERTYANOV JIG VER 3.2. Recommended screws: M3 (10mm) Cross Recessed Countersunk Flat Head Screws: https://s.click.aliexpress.com/e/_c4qsufHN
Heute ein Christmas-Weihnachts-Gadget als aktive Beziehungsarbeit... ;-) Der Plan war, einige Runen mittels LEDs durch transparentes Filament hindurch leuchten zu lassen. Das funktioniert prinzipiell sehr gut:…
A sliding case for an FT232 USB to Serial programming unit with storage for micro clip leads. Inspired by the case @jattie released for a serial programmer, I built this from the ground up to accommodate test clips and a slightly longer…
These are some keychains for popular programming languages! Would be highly appreciated if you upload makes. Additionally, if you would like a keychain of a name, logo, image, etc. then drop it in the comments and I'll design it for you!
This project is a charging and programming dock for the HP Robots Otto , designed to work with a magnetic USB-C cable . The dock allows Otto to: Drive into position Automatically align Snap into place via magnets Start charging or connect…
Project Description : this project is a compact 3x3 programmable keypad based on an Arduino-compatible microcontroller. It allows the user to assign custom functions or keyboard shortcuts to each button, making repetitive tasks faster and…
Introduction This is an enclosure for the SEGA8 Programmer , a cart programmer and dumper supporting original carts for SEGA Master System and Game Gear consoles, and also flash based carts such as: FrugalMapper FrugalMapper Compact The…
XGecu's T48 (aka. TL866-3G) programmer is a versatile, inexpensive, and very useful device. However, the power and activity LEDs on this device are far too bright and blue. It is physically painful to look at them and it makes me fear for…
A little case for the Cologne Chip GateMate CCGM1A1/A2/A4 Evaluation Boards and Programmers from the GateMate FPGA Starter Kit. The evaluation board sits snugly in the case itself and is held down by additional screws. The original rubber…
New version of the initial model of the case . Now having air vents as the device may get quite warm. Additionally, the case has a small guide to help you insert the optional ‘Tag Connect’ cable into the socket in the correct orientation.…
A case to house Dayton Audio KPX in-Circuit Programmer for easier storage and more convenient use. You will require 4 M2 heat-set inserts. The heat-set insert fit is on the looser side, so I just pushed mine in, which should be ok for…
Trays like these are commonly used for small prototype or productions runs with some manual steps, where there is a need to store the PCBs in between processes. It helps keep track of completed items and helps move them from one…
This is a jig for the Z2-N-v1.1 in the GHome WP9 power strip , matching the pads on the edge of the board. I use it, along with ltchiptool , to read/write the firmware, ultimately installing OpenBK . You'll need to clear the holes with…
Funny Sign - Programmer hourly rate. Multicolor and Layer change version (thru pause) Tested on P1P Bambu printer 0,2 layer, change material at 1mm (5. layer)
This print houses a 32x8 flexible LED panel like you can find on Ali Express or that Jungle place. The panel dimensions are 320x80mm and it wraps around the inside ring or between the inside and outside ring. I will be making another with…
This is to help you choose the language for your next project. This is my first time making a 3D model myself, so any tips are welcome. I printed it in Prusament PLA Galaxy Black on my Prusa Mini+. 0.20mm SPEED, 15% infill
My son has a Huion drawing pad so I made a holder for his programmable keypad for the HSW Honeycomb Storage Wall.
This is a Navitas On-The-Fly programmer key for Navitas golf cart controllers. It prints fine without supports, just make sure you have good bed adhesion.
This is a case for the Krikzz MD Flashkit Programmer. Cartridge Connector slot is supported so as to not bend the PCB when inserting the Flashkit. Have only tested it with PAL cartridges. Print with the top half upside down to reduce the…
Slightly modified version of https://www.thingiverse.com/thing:609224 Added 1mm lip in the base to hug the PCB better Increase wall thickness on box by 0.5mm to hug PCB and lid better Enlarged the opening for the USB port, both width and…
3d printed base for aligning pogo pins and mounting a serial module to allow programming of a bare ESP-12E module. Probably works for ESP-12F too. And others? Category: Tools
This is designed to be taped underneath the desk with mounting tape. Due to the position of the USB-C port, the angle at which this can be placed is very limited and this is the lowest I could get it. The macropad should just friction fit…
This is a cover for the ESP programmer. Printed in transparent PETG so that all leds can be seen. I use it to protect the fragile pogo pins of the programmer. There is also an opening for the ESP-01 module.
Einlage für Tanos Systainer micro. In die Einlage passen 2 ESP Programmer.
Mount the HX-916 coin acceptor (and similar) for temporary programming, with easy access to the device's built-in buttons and LEDs. Create a new mount for the device using the matter subtraction model. I printed using PLA. I purchased one…
This pogo-pin clip is designed to facilitate the reprogramming of the Sonoff S31 module without the need for soldering to the pads on the circuit board. The pogo-pins I used are 0.68 mm in diameter and 16 mm in length. The holes needed to…
Box made for ATtiny85 type chip programmer. The box is based on Tiny AVR Programmer - PGM-11801. Manufacturer Sparkfun . The box consists of two parts. Assembly is done by pre-inserting the circuit board into the top and displaying the…
A case to house and protect your timers.shop programmer - you can find them here https://timers.shop or purchase off Amazon. Retains all original functionality To use: Gently remove the zip tie from the manufacturer Carefully slide the…
Storage case for the ODmaster programmer. There are 2 files. One will work with the foam insert from the original packaging and the other is if you don't have the original foam.
I designed an outer casing for the ESP32-CAM (attached to the USB programmer). I built it for personal use but hope it is useful for you too. The back part is removable, making it easy to open whenever needed. The casing has holes for two…
These jigs allow you to access the serial port of the ESP32C3 inside a UK S60 Sonoff Adapter without breaking the glues and soldering wires to the PCB. This was reverse engineered from a measured scan of the PCB and adapter open.…
I needed a way to program a Tuya CB3S chip without removing it from the PCB, and didn't want to solder if I didn't have to. So I made a jig that uses 1mm pogo pins. Print this in whatever filament you want (I used simple PLA) then…
CH340C ESP01 Two Socket USB Programmer Case with Caps. Resized the case to accommodate a modified lever from ESP32-WROOM-32 (USB-C) Box with Lid model for the reset button. Added thickness and three versions of an optional protective cap…
This allows you to take the easy to find & affordable Chinese Lab oven and convert it over to a controller that has programmable ramp & soak features all for about $550 (including the lab oven cost of ~$400). I use this to anneal PPS-CF,…
A protective micro case for CH341A programmer to prevent bending of the USB-A plug connector. Also works perfectly in a tandem with a SOIC8 adapter soldered to the bottom of the programmer. Featured in this video:
I Give All Credits To The Original Designer modmon On Thingiverse. Here Is The Link To The Original Design https://www.thingiverse.com/thing:4830329 . Your Welcome To Make A Remix Just Link To The Original Design And Give The Original…
Remix of original model which extends the base, allowing for some metal nozzle needles i had lying around (something like this https://www.amazon.com/Printer-Cleaning-Stainless-Needles-Accessories/dp/B0DB1ZM9PD ) to rest easily inside.
I upgraded my previous version of button holder and added hole to tight install programming cable (Male-Female) for ESC Please don't forget to waterproof this cable before installation with silicone or something similar And use rubber cap…
This tray may only be applicable to a single variant of the PCB5.0 so take a look at the picture and make sure what you have is the same. The tray only comes up to the height of the PCB surface avoiding interference with the external…
🇬🇧 In my class computer science / programming I use “Klaus” for an entry level course of programming and algorithm design. This is fully analog with cards to lay out algorithms. You can then ”run” these by placing a little figure on a…
This is a custom cover for the Nothing Phone 2 Pro. Disclaimer: This has not been tested as I do not have the CMF phone or components. Everything is modeled based on data sheets for the components linked below. The design may need small…
I used for it eSUN TPU 95A and Kingroon TPU 95A. I think Kingroon is better for this model.
This compact and practical enclosure is designed to fit the CH341A Pro programmer perfectly. The enclosure should fit the CH347 programmer. It protects the device against accidental damage while maintaining full access to all ports and…
Brace for the YGE ESC Programmer because of the flimsy micro USB connector inside the programmer module, aka the USB to Serial module, this stabilises the USB connector plug into the programmer, avoiding false contacts or wear and tear to…
This is a testing/programming JIG to used to test/program G-sense GSI003 temperature and humidity sensor module which can give data directly over RS485. You can read more about it here :…
I purchased a bunch of Luminea TH-Sensors which a great but require a cloud solution for normal operation. They are built similar to a Tuya BTH-01 TH-sensor, for which a custom firmware for Tuya devices on the PHY622x2 chipset is…
This 3D-printable case is designed for a RS232 CH340G USB-to-TTL programmer . It protects the electronics, keeps the wires organized, and makes the device easier to handle during programming or debugging. Perfect for DIY electronics…
IGNORE MY WIRING MARKINGS - YOUR WIRE COLOURS AND NUMBERS MAY NOT MATCH MINE! If you're doing the wiring yourself, follow the instructions in the kit. Our new Honeywell T4 Programmable Thermostat seems to assume there is a channelled wire…
The original tip in my 10+ year old Craftsman tire pressure gauge broke/deteriorated and I could no longer get accurate tire pressure readings. I printed this out of PETG and used about ¾" of plastic fish tank type tubing to connect this…
A keychain for programmers needs to be assembled by oneself, for example using a drop of glue. It is perfect for keys, especially ideal for Python n programmers.
This 3D-printed adapter holder allows easy access to the underside SWD pads of the Arduino Nano 33 IoT — completely without soldering. It’s designed to hold standard Dupont jumper cables or spring contacts securely in place, enabling…
UPDATE. DO NOT USE. The user tested out this clip and the S31 board is too loose to have stable connections on the pins. Without an S31 device to use to model, I cannot correct this. See comment section ......... Sorry. A user requested a…
As DrZzs call this; Jumper Holder Thingy Some of the new Sonoff Basics ( and probably others ) are being delivered with solder filling the serial programming interface. So if you want to flash it, you need to either remove the solder or…
Designed for cafes and other establishments where table & order tracking is required. This handy little kit allows you to print out only the numbers you need and create sets on demand. The unique slotted design makes it possible to…
The Sentinel-6 spacecraft are developed by Airbus Defence and Space for the European Space Agency (ESA) under the European Commision Copernicus Programme and EUMETSAT , with participation from the NASA and NOAA. This component of the…
This is a much smaller version of my 1:25 scale model , meant to be suspended (makes for a nice Christmas tree ornament!). This model is designed for multi-color printing, and you should import all the GOLD-SILVER_MainBody_*.stl files…
Relatively Universal ROM Programmer is a open source Arduino Uno shield for programing E/PROMS. More information about it: https://github.com/AndersBNielsen/Relatively-Universal-ROM-Programmer Boards: This case is designed for Arduino UNO…
This model is specifically designed to accommodate an Arduino Uno with Anders Nielsen's Relatively Universal ROM Programmer (RURP) shield. The enclosure provides protection while maintaining full accessibility to key functionality…
Heute ein Christmas-Weihnachts-Gadget als aktive Beziehungsarbeit... ;-) Der Plan war, einige Runen mittels LEDs durch transparentes Filament hindurch leuchten zu lassen. Das funktioniert prinzipiell sehr gut:…
bunch of programming related keychains including rust, neovim, nix, ghostty
Introduction This is an enclosure for the MegaWiFi Programmer V , a cart programmer and dumper supporting original carts for SEGA Megadrive/Genesis and Master System and also flash based carts such as: MegaWiFi Flatmap64 FrugalMapper…
I wanted a 8 number tracker that corresponds to the Arcadia feeding programme for my bearded dragon so I made this.
Print in this orientation: Product page: MSP430-JTAG-TINY-V2
A set of 12 keychains based on popular programming languages, so you can show your love for coding wherever you go! This set features keychains based on: C C++ C# Python Javascript Java Ruby Lua Swift Golang Rust Scratch Cat Each keychain…
![OR Blocks Logic Puzzle - Introduction to Sequential and Systematic Thinking for Novice Programmers. [Original Design]](https://media.printables.com/media/prints/1053857/images/8009057_c83cd178-d9da-476a-afa9-c78fca3e2951_40a2dd81-69c9-4557-b69c-29107c82cb94/3999b5aa-890e-457a-a6af-4cd1c500bfba.jpg)
