Counting matching models…
Toilet paper version here ( Exclusive model for members ): https://www.printables.com/model/554047-toilet-paper-holder-print-in-placequick-load-and-r A paper towel holder with a print in place mechanism and quick release and load…
Update 11.05.2025 : The bug in the 3D model (male hose quick connector 3/4") has been fixed. Quick garden connector compatible with standard garden taps. 1. Quick connector male for garden hose 3/4 and 1/2: 2. Quick connector female for…
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Simple yet strong hook, perfect for hanging clothes, towels, bags, and more. The beveled edges are optimized for a great first-print result and to ensure they won’t damage fabrics. If you’d like to support my work, leaving a ♡ like ♥ or…
Post-Processing Difficulty: Easy (Ready to Use from Printer Without Processing) Tools Needed: None Introduction: QUICK-CLIP (GEN 3) is a versatile mounting system that I designed to fit standard backpack and MOLLE straps/webbing. This is…
Great small gift idea for bike lovers or demo print for newcomers. Prints fast & Easy. The ones is the pic are 0.4Lh. If you feel this is too small for your liking, feel free to modify scale in your slicer software. This is very quick and…
The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…
Wall Mount Quick fastening system for panels and coverings - Sistema universale di Fissaggio rapido a Pressione Available in two models: Wms_1 - Wms_3 Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements…
* The TINY printer test* is designed to print in minutes, so you can quickly tweak & test your printer settings and get better prints.** Just a few centimetres across, it can print in as little as 10/15 mins and includes 10+ different…
This model was missing from Printable so I upload with credit to the original creator under Creative Commons.
This is a simple 70mm x 70mm first layer test & adjust print.* .3mf files included for PLA, PETG & ABS BEFORE PRINTING THIS: Please consider - -Your build plate and print nozzle are clean -Follow your printer manufacturer's methods bed…
Easy To Print - Works With Screws 3 sizes
This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…
This is an update of my HexMaille fabric, with cleaned up edges and two different size options. Most 3D printed fabrics have a bajillion tiny vertical sections that are fragile and take forever to print. They also end up being kind of…
*** UPDATE (Nov. 2023) *** Some people experienced issues with the tight tolerances around the hinges, so a version with slightly increased tolerances is now available. If your printer is well tuned, I still recommend the standard version…
Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting…
I've been playing too much Call of Duty lately and decided to make a print in place “quick-reload” paper towel holder. Largest paper towel I've tested is Costco's 6" diameter paper towels. Installation notes: When determining the spacing…
A remix of a very simple design, I increased the shoot per load from 3 to 4. I also made hollows in the body to decrease material usage. There is also a notch for adding an optional small rubber band, inside the body and trigger, hidden…
Meet Bruno, the charming little hedgehog that fits right in the palm of your hand! With its cute round shape and spiky details, Bruno is an easy and fun print, ready in just 25 minutes. No supports needed, making it hassle-free for any…
Micro Disc Shooter This is a travel prefect, print-in-place micro disc shooter. It measures about 5 × 3 cm (2 × 1.2 in). With the disc clipped in place, it slips easily into your bag—always ready for a quick game or a fun challenge. How…
V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…
Design This quick connector features a supporting thread to ease the press in process of the PTFE tube. The tube will be hold in place by the 2 holding rings on top. Assembly Put some painters tape around the tube (leave >2cm free) to get…
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
UPDATE: There is now an even BETTER version that uses a twist-lock mechanism so you don't have to bother with the magnets: https://makerworld.com/en/models/487870 UPDATE: These files have been superseded by V2!! See update notes below.…
From original author description: It takes about 5h to print all parts at 60mm/s, uses only around 50g of filament at 20% infill, and can easily be printed on any 3D printer as the shapes are very simple, with no bridges and maximum 45°…
Printed with easy ABS. I also added an editable file to make it easier to modify. I used 1 x M6 furniture connector bolt (picture added). I hope it will be useful for you. For those who want to use only the screw and nut (without…
Here's a really quick and cute cauldron for stashing some candy! I printed in vase mode with a 0.4mm nozzle, 0.2mm layers, and 0.8mm extrusion width for perimeters. This model can also be printed as a standard print instead of vase mode,…
Quickly designed this fairly quick print desk tidy. It has 2 parameters all around so it prints quite fast for its size (around 9 hrs with the included g-code). This is for MK3 only. As soon as you change the scale, the wall would be too…
Say hello to Mochi , the cutest little frog you didn’t know you needed! With its smooth, rounded design and adorable expression, this 3D-printed frog is perfect as a desk companion, or a tiny collectible. It prints in under 30 minutes,…
Simple to print and install. Make it as strong as you desire by adding perimeters. Mine are in PLA with 5 perimeters. They’ve endured plenty of abuse and are still going strong. If you’d like to support my work, leaving a ♡ like ♥ or even…
Quick Release Buckle Clip (backpack & belt Clip)
Hello everyone, This model serves as a cover for the wiring and board that remain exposed after removing the stock shroud from the Kobra 2 series while installing the Mantis fan duct.…
Now updated to an improved V2 design with additional “Compact” and “Belt” variants available! See update log for details. Summary: Extremely versatile hook and D-ring style carabiner combo, inspired by ITW GrimLoc carabiners I have been…
Say hello to Nibbles , the cutest little bunny just in time for Easter! This adorable 3D print is designed to be quick and hassle-free, completing in just 30 minutes. With its big, expressive eyes, chubby cheeks, and charming little…
This hook releases its load if you turn the little lever on the side. The force you need for this is independent from the load wight. If you attach a smaller rope to it, you can trigger it from a remote position or from the ground.…
Huge thanks to DaveyPrints85 for providing the first make on this model and allowing me to utilize his photo as the cover. If you print this, please post a make, leave a like, and comment. I would love to see someone else print this, and,…
Note: This model, design, and rendering was done by Arron_mollet22 . You can find this listing on Thingiverse . Reposting under the Creative Commons - Attribution - Non-Commercial - Share Alike license. I did not see this posted here yet,…
- 3/4" male quick fit connector - 3/4" female quick fit connector - 3/4" - 3/4" pipe joiner All parts are designed for an european household hence built with 3/4" BSP threads (=3/4" and 14 TPI (male part OD is 26.441 mm or 1.04")).
Optimized for use minimum amount of filament
You downloaded it? Please like :) It doesn't cost anything and it encourages me to implement more projects :) FIRST LAYER (layer 0,2mm and squares 20x20 mm) size: 100x100 150x150 180x180 200x200 210x210 235x235 256x256 300x300 320x320…
Break-action sanding block Open. Load sandpaper. Close. SAND IT! Your sanding block experience has never been easier. USE: Before first use, to open the hinge: Hold the sandpaper half by both sides in the middle Holding this half in the…
The QuickDraw Sleeve & Toploader Dispenser is a premium storage solution specifically designed for efficient organization and dispensing of your trading card sleeves and toploaders. Its innovative design enables hassle-free storage and…
15 Minute calibration test. Used to compare Prusa Mk3S, Prusa MINI, Ender 3 Pro, PLA, PETG, ABS, ASA, TPU on youtube. You can see the results here: https://imgur.com/gallery/AVIMRUl The overhangs are 10,20,30,40 degrees. The hex hole is…
Allows you to take a small monitor or graphics display tablet e.g. Wacom Cintiq 16 off of a standard monitor arm and put it back without needing a screwdriver or precise alignment of the mounts due to the self-aligning dovetails. You'll…
Precision ingenieur'ed paracord lock that does not require additional parts and prints easy and reliably. Will fit 4mm diameter paracords and is very compact in size. Obviously not suitable for safety relevant applications. Assembly…
Make your own ribbon-flowers to decorate your Christmas or birthday presents. tools you need: scissors stapler double sided tape or glue (hot glue works best) ribbon width for each size: S: ~5mm M: ~10mm L: ~15mm how to make your…
This is a quick change sanding block I designed. To use this tool: cut the sand paper to the length described below place the bottom of the sanding block on the center of the sand paper wrap the edges of the sand paper up sides and around…
Just a quick test (about 1 hour) for testing the bridging capability of your FDM printer and its settings. Features: -bridge length: from 2cm to 10cm -bridge thickness: 2mm -thin base for better bed adhesion Advance: -you can play around…
structural integrity holds up enough to print in PLA can be printed at any scale, but at double size it became really hard to pull back the firing mechanism even at the regular size these pack a punch, so be careful
A practical little print that presses your toothpaste (or any tube) from the bottom up, squeezing out every last drop. Makes a perfect small gift for friends and family. Toss a few in a gift basket, print a handful for the holidays, or…
Update 24.06.2026 Released the F3D and STEP files of the entire assembly Added a compact backplate (50mm wide) 1. Introduction I needed a sturdy and reliable design to remove the Monitor stand from a 24"-ish Monitor, intended for use in a…
This is a remix of the amazing Quick-Change Paper Towel Wall Mount by DanPDK modified to work with IKEA SKÅDIS pegboards . It's very sturdy and does not wiggle or wobble. Thanks to the use of T-Nuts , it is very securely mounted and easy…
Wanted a cable clip for the hsw that is as primitive as possible. There are three variants with different guide types.
This 110mm light-duty clamp uses a quick-adjusting rack & pinion to open and close the clamp, and a spring-release ratchet to hold the clamp shut. It prints with minimal supports and requires no additional fasteners. Print Settings…
While my previous vase-mode trophies included two low-poly designs, I find their patterns to be too regular for true low-poly aesthetics, so I made a new one that matches that style more, and a fitting base. I didn't mark it as a remix,…
I designed this quick tolerance test to have a fast print to use once printer calibration is done. Used in combination with my 30mm test cube( https://www.prusaprinters.org/prints/39965-30mm-test-cube ) you can get a very good baseline on…
Hello everyone :) With the way things are in the world right now, I decided to make a soap dish for next to the sink, but one which aids the drying and removable of water, making your bar of soap last you longer. The design was also made…
Tactical reload paper towel holder for IKEA Skadis peg board. Houses rolls up to 24 cm in length and 16 cm in diameter. I remodelled the original lever and added a curve to the roll contact face. Still fully interchangeable with the…
Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…
A remix of DanPDK Quick-change Paper Towel Wall Mount holder allowing for it to mount to multiboard walls Requires M3x20mm bolts X2 as hinges for the flap
!!! Quick Side-Release Strap Buckle !!! 2:30 Print time (Can surely be optimized) Max. strap width 27mm I recommend printing in PETG It sure does what a Strap Buckle do. Feel free to do anything with my precious Quick Side-Release Strap…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP (GEN 3) : Base Starter Kit" Post-Processing Difficulty: Easy-Medium Tools Needed: Side Cutters, Files, Sand Paper, etc. for the standard whistle; none for the low profile whistles.…
I've remixed the original STL so you don't need additional screws for the holder. Just slide it in and you're ready to go. Print instructions Category: 3D Printer Parts Summary I've remixed the original STL so you don't need additional…
This is a rubber band powered filament clamp-on to prevent the spool from unraveling when stored. Mechanism is fully print-in-place. Add rubber band for the spring loading. I reused some that came with a bunch of asparagus. There is a…
About the Splitter: Most Y-splitters are printed vertically, which can cause unwanted filament friction inside the part. To solve that, I designed the Quick-Lock Y-Splitter . Thanks to its horizontal print orientation , the filament…
Ever since stumbling upon buckle designs made specifically for 3D printing I kinda got stuck on the idea of developing my own. So this is my first official attempt ;) All parts are designed to be printed without supports. You can mix any…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
Sometimes you need to run a cable in a clean manner and also be able to remove it (or what it's attached to) quickly and take it with you. That is why I made this. I printed mine in PLA and they are very strong. The screw driver access…
We've been playing with this fortune telling fidget for days on end. Six possible responses for your fortune, but we also just like to play and spin the dice. Print it in your favorite colors, or mimic the magic 8 ball that inspired it.…
Tripod hızlı bırakma plakaları evrensel değildir. Bu, en çok kullanılan ebatlı üründür. @Farklı ebatlarda ürüne ihtiyacınız varsa @en geniş yan ebatlar 44*44mm
Designed to snugly fit a metal bar (or any bar with a 16 mm diameter), these hooks are stable and can easily hold the weight of heavy coats. I printed mine in PLA with these settings: 0.28 mm layer height, 100% infill, and 6 perimeters.…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Medium - Hard Tools Needed: Needle Files or Fingernail Files, Side Cutter, Deburring Tool, etc. Introduction & Instructions:…
This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number. Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to…
Note Update 08/24/23: I finally had opportunity to test this model myself and can confirm that it works just as good as the original model. This is a modified version of Bambu's original tool. It will print 30-40% faster. On the X1C you…
I used PLA, all your favorite flow cals etc should work great, I did mine at .2 layer height with a .4 nozzle. Your slicer will show errors, do not print with supports. The layers “floating” is why they come apart so easily.
Important: Voron Design "Cable Frame Anchor" model has been modified to make this convenient and easy to mount panel clip. Support my work by purchasing printed parts from layer.guru - premium quality custom printing services. Suitable…
Meet Lumi , the tiny owl full of charm and personality! Designed for a fast and easy print, Lumi is ready in just 20 minutes, making it a perfect quick project. With big, expressive eyes and a rounded, cute design, Lumi is great as a desk…
Second type has a tight cap, to hide the srews. (you can remove it with a screwdriver) And one dust cap for the wheel. Watch the name convention, 1-2-3, find the file name connections beetween brackets and letters.
In order to change the filament quicker and more comfortable I made some small and easy to install parts in Fusion 360. With this you can change from one colour to to another by simply changing the PTFE tube adapter and close the box with…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
A super easy clip to personalize your desktop supplies or add some flair to your bills. We printed it at .15 layer height with our .6 nozzle, but only because that is what is hooked up right now. It would probably still be ok with a .4…
version 2 is out and its smaller then ever!! Introducing the super cool Quick-Release Picatinny Rail Mount, a game-changer in the world of firearm accessories. The quick-release allows for easy changing of accessories or adjustment on the…
Optimised for exceptional quality with PLA or PETG using a 0.8mm nozzle (also works with 0.4mm nozzle from 0.20mm to 0.28mm layer height) Model scaled to 75% size for a higher pitch (scarier) Great adhesion when printing a full bed of…
Meet Smokey, the little dragon full of charm and personality! Designed for a fast and easy print, Smokey is ready in just 20 minutes , making it a perfect quick project. With its round and playful shape, Smokey is great as a desk…
Most self-watering planter designs print in two pieces: a planter, and a self watering insert. This one is just a single print. Versions: Two versions are available: Blank and Faceted. Both function identically, however blank prints…
WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…
This model is a fully printable shop towel pegboard mount with a quick load function for ease of use (and tactical towel reloads, of course). No dowel rods required! Fits a standard 1" x 1" pegboard, and can be removed/adjusted as needed.…
This version doesn't require any support to print and is a more snug fit than the previous . It also allows for a better waterflow while preventing smaller objects to fall into the drain hole. If you’d like to support my work, leaving a ♡…
mixed the quick release (thanks DerrickDarrell) with my front Y bracket Update: New version added - bracket moved to the left about 13mm to give more room to be able to use it with wider bins than mine. See picture from spitfire in makes.…
This is the standard GoPro quick release clip with a built-in locking mechanism -single print, no assembly needed. I have used James Rogers's model from GrabCAD.com ( https://grabcad.com/library/gopro-quick-release-mount-standard ). Print…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy Tools Needed: Deburring Tool and Small Needle-Nose Pliers Introduction & Instructions: QUICK-CLIP is a versatile mounting system…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
I wanted to use the Prusa Dryboxes with a PTFE-Tubing clamp instead of the plastic-flap gap that the dryboxes currently use. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox…
I designed the Print In Place Quick Flex Chain in SOLIDWORKS for the Printables Quick Flexis contest (09/06/2023). There are 3 chain lengths: Short-5 segments Long-10 segments Extra Long-20 segments All the files are orientated for…
This is a 2020 T-Slot removable locking/sliding fastener to be incorporated in other designs for attaching accessories to printers with 2020 bars. I have a Creality Ender 5 which has 2020 top and bottom rails or crossbars. UPDATE: BE…
I absolutely love that Josef Prusa includes spare hardware with his products. To date, I have built 3x Prusa MK3 printers, 3x MMU2 units, and then upgraded them all to 'S' which has left me with a ton of various M3 screws. I recently…
