58 models
This case has 4 versions: Plain : No cutouts and no mesh Plain cutouts : This version also has no mesh but it has slits for GPIO and camera cables Mesh standard : A mesh is added in PrusaSlicer to the 3MF files. This only works when you…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the top half of the Raspberry Pi 4 case created by plammers to include extra height to allow the fitting of the official Raspberry Pi 4 POE HAT.
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
This bracket was exactly what I needed to mount my standard Raspberry Pi camera in my printer, unfortunately the bracket was a bit too big for the Raspberry Pi camera V2.1 so I printed a smaller bracket, but it is compatible with the rest…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
A friend of ours created a custom PCB containing a display and Pico W for an engineering class that my son is a part of, and so we decided to create this 3D model of a case that could hold the custom PCB components. Case is approximately…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
My spin on this great design - added 3 extra cut outs - 1 for camera ribbon cable 1 for a power connector (2Pin) 1 for a filament sensor (4Pin) [3pin could be used with a mod to the model only used 4 pin as thats that i had] using JST…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
This is a 3D printable model that allows people with a Rasberry Pie 0 W to screw their board down onto the holder so that they can securely clip it down anywhere. This model features a moveable head, an adjustable clip and room for…
Print approx. €4.98–€6.08 excl. taxPreliminary estimate for one variant
I used the holder with the Raspberry Pi wide-angle lens with a focal length of 6 mm. See technical drawing for exact dimensions. Print PLA 0.2 mm layer height printed as four pieces joint 2 w/ support 20% infill Additional material M2x 8…
Mounts for components commonly used in Meshtastic outdoor installations utilizing a weatherproof box. These mounts are for: RAK19007 WisBlock Board Raspberry Pi 4 Heltec v3 coming soon. They are meant to be used with a box which uses a…
I wanted a way to attach my Pi camera to the awesome case design that Malolo provided for the Pi4. I did some rough measuring of the printed case top, set up for a 30mm fan mounting pattern; did some modeling in F360, mashed some models…
A Case for the Rasberry pi 3b+ with screws. It has air vents and a slot on the side to put in a note with e.g. the pins
This is a fully printable case for a Raspberry Pi Zero 2 & Camera Module v3 (Wide) that can be used as a face camera. The primary use case is a wireless HMC (Helmet Mounted Camera) for facial motion capture. For example the Brekel Body v3…
Hi, ich bin die Tage bei Amazon über diese 70mm Lampioneinsätze gestolpert:…
A simple mount for Rasberry Pi Zero.
Working on a version that has mounts for a BTT can bus interface A remix of a remix! Added mounts for 2 lm2596 buck converters, use a 90 degree usb c adapter to power your pi . Follow the print instructions from the original creator…
I built a very slow movie player and I built my own snap-fit case. It features a perfectly-sized window for the display, with slide in holding mechanism for it, a 10 degree tilt up, pegs to fit a raspberry pi 4, and a cutout for power.…
created this for mounting a raberry pi 3B+ in a rack and have some kind of heat sink attached to it. You may have to redesign the bracket. The holes were design for 3mm screws heated inserts (you may also use a nut instead).
The model is stil in progres! Feel free to test and mention what else should be added in order to become a perfect case!
I couldn't find an Osu keypad using the Rasberry Pi Pico so I designed my own using mechanical switches To build this you will need 2x Cherry Mx or equivalent switches, 2x 1N4007 diodes, 4x M3x12 screws, a Rasberry Pi Pico and some thin…
Bast on Sinns his Case that I like, But Becouse Im on a top floor where is very hot i need a case for good cooling for my raspberry p4 And also I want my hyperpixel 4.0 in it with a Dual Cooling Fans so i had to change some add a few to…
Bracket para añadir un ventilador 3030 de refrigeracion a la raspberry pi zero o zero 2, esta conectado directamente a la placa y controlado por klipper. Bracket to add a 3030 cooling fan to the raspberry pi zero or zero 2, it is directly…
You can buy the Rasberry Pi Zero 2 here This is an on going project of the new raspberry pi zero. All dimensions are accurate to the CAD drawings provided. I have modelled a variety of the SMD components or readjusted from existing other…
Remix to accomodate TP-Link TL-SG108 (had de 94mm verison) a rasberry pi 3B+ with heatsink and my ISP ONU model AN5506-01-A1. The parts that are different from original are in Gray. Both of them connect with the LEFT TP-Link TL-SG108…
Modified case top for use with Armor Lite V5 cooler for Rasberry Pi 5. May want to double check the hole diameter, i had to shrink it down pretty small to fit my magnets. hex grid isnt centered on the fan, OCD beware.
This is a Raspberry Pi 5 Model B case that I designed. It has the ability for an RGB LED to be istalled on the top right or left. On the Back of the case you can unscrew the back panel to reveal some passages for the wires needed to hook…
I made this for a project, and I'm really happy with how it turned out. I am not an experienced CAD designer, but I thought that someone might like this design as much as I do! It uses an 80mm radiator and fan, with a cheap water cooling…
Rasberry Pi 5 - Case 15% infill No supports
Extender part with raspberry pi zero mount.
A small, stylish 3D-printed case with excellent airflow and space for a 50 mm fan. Perfect for keeping your Raspberry Pi
It's a mount to allow you to mount your raspberry pi pico to standard v-slot aluminum extrusion profiles, like 2020 extrusions..
a rasberry pi 3b pc with a huge 80x80x20 fan . this is for a rasberry pi b,a b+ might not work. remixes allowed.
An active cooling case for the Raspberry Pi 4. Along with Thermal & Flow Simulation (dm for simulation files) Aesthetically designed.
My version of Raspberry Pi 3 B Cooler 30mmx30mm Holder
This is a snap-fit case for the Rasberry Pi 4 b with mounting holes.
Hey everyone, I wanted to share with you a basic and simple design for a Raspberry screen that I found on Amazon. You can find it at https://www.amazon.co.uk/gp/product/B07QK. This design relies on a push-fit mechanism, which means it…
its a case for a raspberry pi zero of 2w version
This is a simple cable clip I created to route Raspberry Pi camera ribbon cables. Attach to a surface using double sided tape, and the cable clips right in. It has a little wiggle room, so you can even hold a few cables in one clip (or…
Made as a stand-in so I could model & measure my 3D-printed cases without having to use my actual pi.
I came across this Pi Zero UPS ( link ) and decided to create a sturdy case to protect it and keep it secure. https://s.click.aliexpress.com/e/_omeOqNL alternative link:…
All models print without supports. I used PETG, 30% infill
Beim Umbau meines Anycubic Vyper auf Klipper mit DGUS Bildschirm störte mich dass der Bildschirm seitwärts wackelte. Mit dieser Platte wird dies behoben. Passt zu:…
Based on jgeyer's mount, and made the following changes Lengthened by 10mm to clear the angled print fan of MK2.5 and MK2.5S Enlarge bottom hole where heat bed screw-head fit in, to avoid heat bed screw getting stuck during…
Used this to mount my rasberry pi's camera on the wall to monitor my printer
Rasberry pi case by Renri09 with a square for a heatsink.
The goal of creating this model was to have a portable Raspberry Pi 4 that could operate for at least 2-3 hours without a power outlet and allow for convenient typing with a mini-keyboard. For this model, I used the following components:…
Hi, this is an adapter I made to fit through the holes on the Honeycomb Front Panel Mod from Pimpyourprinter (https://www.printables.com/model/413070-sovol-sv06-honeycomb-style-front-and-back-grill/remixes). It's designed to fit through…
I wanted something a little stronger around the screw holes, so I went with a little more infill. Then used a tap to make the threads. I used M2 screws for the Rasberry Pi 3 and M3 for the mosfet. Rafts: No Supports: No Resolution:. 2…
it holds 6 pi's and go's on a honeycomb wall
Mount on the printer as the original one, I used double sided tape. Parts Needed: 4x Heat Inserts M2 x 4 x 3,5 2x Heat Inserts M4 x 5 x 6 4x Bolts M2 x 6 [KLIK] 2x Bolts M4 x 22 (Panhead) # The one with the cable mount is for my Led Bar…
This model is a remix of https://www.printables.com/model/388508-rasberry-pi-4-model-b-case-with-snap-fit-mesh-lid with a dove tail fitting that will fit…
This fancy bracket holds down raspberry pi 4s with a certain type of case. It doesn't even fit all that good so maybe measure and tweak before printing and ending up super disappointing.
I made this because I always wanted a cute, portable laptop; it seemed fun to make a case for it, so I did! What this is solving is a way to make the Raspberry Pi portable, so you can use it on trips to connect to bigger screens for…
Made as a stand-in so I could model & measure my 3D-printed cases without having to use my actual pi.
I made this for a project, and I'm really happy with how it turned out. I am not an experienced CAD designer, but I thought that someone might like this design as much as I do! It uses an 80mm radiator and fan, with a cheap water cooling…
