Counting matching models…
Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
This compact pill case is designed for situations where a full-size pill organizer would be unnecessary or impractical. Its ultra-slim form factor makes it ideal not only for travel, but also for everyday situations such as g oing out for…
This is a version of the well known “TicTacToe” game. This game is easily transportable and can be played in a car, train or plane while traveling. The lid has been designed in such way that it is easily taken off to use as a tray to hold…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
This is my version of a portable Quoridor game You can easily find the rules of the game in the internet https://en.m.wikipedia.org/wiki/Quoridor All my travel games have the same size. That makes them easily stackable. They are small…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Foldable Travel Hanger A foldable low profile travel hanger for men and women. All parts are printed parts so there are no additional screws or nuts needed. Use a slotted screwdriver to get the screws in (they fit in pretty good even…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
This is a box for your nintendo switch with accessories. With this box, you can take your switch safe to every place! The lid opens 270 degrees, so you can put the box in the back pocket of the car seat and then have a switch table. The…
Print approx. €19.37–€23.67 excl. taxPreliminary estimate for one variant
As we play Rummikub a lot we optimize our ways. We use the travel set with smaller tiles and I've designed custom, stackable stands with four grooves, so you can store each color separately. It is not a super easy print! You need a strong…
Print approx. €4.74–€5.79 excl. taxPreliminary estimate for one variant
Gillette Fusion Razor Travel Case with Blade Cartridge Storage This compact and practical case is designed to protect your Gillette Fusion razor during travel or everyday use. It closes securely to prevent accidental opening while…
Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant
I also made camping version. It is here : here Tento inovativní 3D model skládacího ramínka vás ohromí svou jednoduchostí a praktičností. Ve složeném stavu se vejde do dlaně a je tak lehké, že ho můžete nosit kamkoliv. A co je nejlepší?…
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
Update (04/02/2024): I've added a base design that has a space for the score booklet, it is 7mm thicker than the original design. Simple print, 15% infill, no support. I'm holding it close with a rubber band when traveling. On the base…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
A handy travel sized toothpick case/dispenser. Note: The optional cap may be printed in Vase mode, using an extrusion width of 0.8mm 2023-07-09: Added another version with a combination image & text. 2023-07-10: Uploaded some optimized…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . NOTE: TOP PART should be printed with ZERO top and bottom layers, pattern infill of your preference at 15-50%. You could also rotate the piece so the pattern changes. (0.25mm clearence) Nozzle:…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
nastavení: 0 plných horních a spodních vrstev
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
I wanted to design something slightly more compact and easier to use than my original travel case with integrated stand. In the end: it's slightly more compact there is a version of the stand in which you can insert a 1€ coin to add…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
The mounts are designed for handlebars + handlebar tape with a diameter of 40mm and increased ground clearance. I printed whit PETG them with 4 perimeters, 10% honeycomb infill, without top and bottom layers.
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
The model is still a prototype that I am testing in my car. Replacement of the heater fan grille with a cup holder adapter. The dimensions are pretty tight, so it's better to take out all the grilles, insert the replacement and then put…
Print approx. €5.52–€6.74 excl. taxPreliminary estimate for PETGSource material: PET
Keep your Q-Tips clean and organized wherever you go! This durable threaded case is made of two parts and holds about 60 Q-Tips , making it ideal for trips and family use. Designed for cotton swabs up to 78 mm in length. Dimensions: Ø 50…
A simple travel spice container for your favorite spices while traveling! This three piece design has close tolerances to keep your spices traveling with you but not leaking in your bag. The inner lid has 13 holes for easy application to…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
This is a remix of my own Travel Battleship game. After having printed two sets of games, I saw that there are a lot of parts (2 x 64 markers). Then I realised that it is not necessary to track your opponent's shots, with exception when…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Opens sideways when the nut is not tightened and the nut stays attached (and will not get lost) even when unlocked. Lets you open your bag with ease using two hands while at the same time making it more difficult for pick-pocketers to…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
This is a version of the well known (Peg)-“Solitaire” game. This game is easily transportable and can be played in a car, train or plane while traveling. The lid has been designed in such way that it is easily taken off to use as a tray…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Ratio-changing pulleys are a wonderful hack for bikes. For non-electronic drivetrains, they allow bending the rules normally requiring a stringent pairing of shifter, derailleur and cassette families. Also called travel agents or…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a travel case for cutlery and thought it would be useful if there was a version with included the model source so people can easily tweak it. The included .stls are for a 20x50x200mm internal dimensions case, with a wall…
Print approx. €2.54–€3.10 excl. taxPreliminary estimate for PETGSource material: PET
Keep your washi tape organized at your desk and on the go! FEATURES designed for washi tape rolls with 25mm diameter fits 4 rolls of 16mm width washi tape screw-on lid for compartment to keep small accessories -- great for additional…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
This is a 3D-printed replacement cart lock for the Weber Traveler barbecue. It is a direct copy of the original part. The part should fit all models of the Weber Traveler. Context A friend of mine also has a Weber Traveler as his cart…
Print approx. €1.36–€1.67 excl. taxPreliminary estimate for PETGSource material: PET
This model is an easy long print, although be aware of warping! A default 0.2mm will do fine with a 0.4mm Nozzle and Perimeters set to 3. Recommend PETG, not PLA. Used filament in the picture; Extrudr PETG color “Dessert Storm” At first,…
Print approx. €8.86–€10.83 excl. taxPreliminary estimate for PETGSource material: PET
I got the idea after watching this video on twitter of two people playing this game. This little video should explain the rules really good. I made a travel version for this game where you can click the figures and walls into place. with…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
The three-tiered stand that comes with the Rummikub Travel was too small for me. So I created this model that allows for an extra row and also fits in the original box. It's compatible with the original Rummikub Travel stand legs. If you…
Print approx. €2.55–€3.11 excl. taxPreliminary estimate for one variant
Add this gravel tip to your Dennerle “Mulm Sauger” or “Gravel Cleaner” to dig through your fish tank gravel and vacuum all the dirt away. May fit to other cleaners, if they also have tubes with an inner diameter of 26mm (probably 1 inch).…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Compact Medical Injection Travel Kit - from ElectricMagpie Introducing the Compact Medical Injection Travel Kit! A convenient and practical travel kit for medical injections. With a compact design, it comes equipped with a stand to hold…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
Simple print, 15% infill, no support. I'm holding it close with a rubber band when traveling. On the base you can find pictograms for the number of players, age, and duration. I didn't leave any space in the box for the rules book, but…
Print approx. €6.41–€7.83 excl. taxPreliminary estimate for PETGSource material: PET
This quick and easy print clips onto the accessory clip on the Bugaboo Fox and holds an Emsa Travel Mug - this insulated mug is great for holding a nice big cup of hot tea or coffee. You can have it right in front of you as you push the…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
This chess board has keyed slots, so each piece sticks in and turns a little bit so that they won't fall out easily. There are also extra holding slots all the way around to hold the pieces as they are removed from play. I designed this…
Print approx. €7.71–€9.43 excl. taxPreliminary estimate for one variant
Our original Qwirkle game had - after years of playing - lost the colors on the blocks. Also it was far to big to take it to a bike travel. So I made a smaller version by myself. Print “Inlay” 6 times with different colors. Print “Boxes”…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
This is a tavel version for Boop board game. Use the round side of the pawn as “little cat” and the starred side as “big cat”. https://boardgamegeek.com/boardgame/355433/boop
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
I wanted a compact travel case that fit the board game Jaipur. I was heavily inspired by the design made by @ArsenalFanDan_301656 found here but it only fit the UK version of the game which has fewer tokens and cards - so I made my own…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Travel charging stand for Samsung Galaxy Fit 3 fitness band. Attachement for easy and compact charging with wall charger. Suggested print orientation seen in the picture. Use organic supports.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Philips OneBlade Travel-box with stand A small box with a lid where the accessories are stored. https://amzn.eu/d/ivvry3F
Print approx. €7.71–€9.42 excl. taxPreliminary estimate for one variant
Travel box for Phillips Sonicare plus two Curaprox inter-dental brushes and TePe flosser. Box is held together by a set of magnets 9x4.5x1.6mm glued in place. Joints are locked by two stainless steel pins 30mm x diameter 3mm (real…
Print approx. €5.70–€6.97 excl. taxPreliminary estimate for PETGSource material: PET
Krabička je tisknutelná v kuse s podpěrami především na místě pantů. Rozměny jsou 110 x 80 x 12 mm. --- The box is printable in one piece with supports especially at the hinges. The dimensions are 110 x 80 x 12 mm.
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for PETGSource material: PET
This is a Travelele purpose-built to be tuned in GDAE or GDAD. I'm an Irish Bouzouki player and wanted something I could take on work trips to practice. The Travelele was ideal: quiet, portable. But it wasn't set up to be tuned in GDAD,…
Print approx. €9.28–€11.34 excl. taxPreliminary estimate for one variant
Designed for the " Philips OneBlade & Kingdom Come ⚔ " contest, this case combines medieval aesthetics with modern functionality. Whether you're a humble blacksmith's son or a knight on a quest, this case ensures your grooming gear is…
A case to put your joycons in when traveling.
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
I regularly keep a pot noodle in my bag as I don't know where I will be at lunch time. I've made a simple to-print pot noodle lid/cover as it regularly spilts the top film in my bag. This fits both the large and the small pots to cover…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for PETGSource material: PET
Coming soon: parametric model. If you need other sizes please feel free to contact me. Disclaimer: photo belongs to the 10mm thread height variant. Cylindrical case designed to hold common interdental brushes. Features: Cylindrical so it…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
One of my favorite board games is Splendor, by Marc André. For a game which requires very few components, that box is rather large, so it's difficult to tote around. I've reduced the footprint and provided a sturdy casing to survive many…
Print approx. €17.56–€21.46 excl. taxPreliminary estimate for one variant
Holder for front wheel or rear wheel. I use it in the indoor season so I don't have to lean the rear wheel against the wall. I also attached an adhesive felt to the screw to avoid scratches (see pictures)
Print approx. €7.38–€9.02 excl. taxPreliminary estimate for one variant
A kit of parts to enable the users to play ‘The Travelling Lemon’ gamer from John Finnemores excellent BBC Radio Comedy show ‘Cabin Pressure’. Player 1 must hide the lemon in a place where it can be clearly seen and announces to player 2…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
This is another model from my Vapor's World collection . Travel box for 30 ml liquid and two batteries. A remix of Mar Ber's great Configurable Box. Batteries: 18650 Bottle: approx. 30 mm x 88 mm If you like this model, feel free to check…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
This is a variant of the well known “TicTacToe” game. To make it more interesting now you have to play in 3 dimensions. Beware, it is not easy to recognise a row in all 3 dimensions! In this game each player has 3x3 pieces. (The 3mf and…
[EN] This napkin ring model was designed for a friend who recently got married. The model consists of two parts: An airplane with a slightly cartoonish design The ring, which adheres to standard napkin ring dimensions (40 mm diameter) The…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Simple print, 15% infill, no support. I'm holding it close with a rubber band when traveling. On the base you can find pictograms for the number of players, age, and duration. I didn't leave any space in the box for the rules book, but…
My son is a line cook, and has his own knife. But carrying it back and forth to work was causing damage to his shoulder bag. Thus, a simple cover to keep it safe. His knife has a 210mm blade, 43mm wide at the hilt. Print it on the edge…
Print approx. €7.38–€9.01 excl. taxPreliminary estimate for one variant
Raspberry Pi Pico W Protective Travel Case V2 This is a simple case that I modeled to protect my pico w board and the header pins whenever I need to take it with me somewhere. It secures the pico w board well to the point where it won't…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
A little box for four sugar cubes. I designed it für cubes in the size of 16 mm x 16.5 mm x 11 mm. I uploaded also the *.f3d file, thus you can adjust it. You have to print it twice.
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
I used PETG as the material because it is not so tough but more elastic. PLA can break more easy. If the protective cap doesn't fit to your razor, try changing the dimensions in the slicer. I have made 2 versions. The one with both ends…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Quest metal detector travel/storage coil socket cover for Q60 (should fit other models also - Q30, Q35, X10pro) to protect socket from dust/debris or mecanical damage Printed on AK Kobra NEO, PLA 0.12mm
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Solid Shampoo Bars Meet the Perfect Companion: The Shampoo Box Solid shampoo bars have become a go-to choice for many, thanks to their eco-friendly and convenient benefits. They help conserve water, reduce plastic waste, last longer, and…
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
The game board can be folded into a box and then houses all the game tokens. You can use it to play Reversi/Othello or Checker. Gamebox : Insert a piece of filament into the hinge. The best time to do this is when the box is still…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Double-sided token to use with the Traveller RPG game to help keep track of Boons and Banes. The top side says “Boon” and the bottom side says “Bane”. The token is 40mm in diameter and it is designed to easily stack. I included a blank…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
I created these 40mm wide Tokens for the Traveller RPG game to help players keep track of their modifier penalty due to damage to their character. The tokens are double sided ; -1 on one side and -3 on the other side. The tokens are made…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Simple print, 15% infill, no support. I've designed it to be kept close thanks to four 6x2mm magnets, but if you don't have that on hand, holding it close with a rubber band when traveling should do the trick. On the base you can find…
I designed several 3D printed gaming accessories for the Traveller RPG game (long folding gaming ruler, boon/bane tokens, and -1/-3 wound modifier tokens). I also remixed a short set of gaming rulers. This is a set of boxes to carry all…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
As you can probably garner by the name, this is a very inspired MagSafe charging cube. But I'm cheap and wanted a bit of a reason to learn proper modeling techniques. It is split into 3 printed parts for both ease of replacing something…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
Compact Travel Case for Anker 735 Charger (Nano II 65W) I’m excited to share my latest project: a travel case for the Anker 735 Charger (Nano II 65W) ! The case is made up of two parts: Inner section : Designed to be printed in TPU,…
Print approx. €4.41–€5.39 excl. taxPreliminary estimate for one variant
Case Inlay for GoPro Travel Kit 2.0 (https://gopro.com/en/us/shop/mounts-accessories/travel-kit/AKTTR-002.html). For dimensions of the inlay, please check the drawing. I designed it for my needs, the inlay can handle one gopro hero 11…
Print approx. €11.86–€14.49 excl. taxPreliminary estimate for one variant
Surface Mouse Travel Cover Vase Mode
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Created since I was missing one CAP to my hammock.
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Koudelinek Iphone cestovní držák na nabíječku | Iphone travel wall holder for charger DEMO V2 Zbytečně velký otvor
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Matériel nécessaire : une boîte d'Agricola une boîte A5 de 4 cm d'épaisseur intérieure minimum des feuilles résistantes pour imprimer les plateaux de jeu un crayon Ikea ou mesurant moins de 85mm Préparation du jeu : Retirer : les jetons…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
This model is the modified lid from Rugged box for BLOKUS travel set by Lu123. It was modified to have the logo from Travel Blokus by Print3D Pilot. The 3MF file has all the 3 parts combined to allow for just the logo border to be a…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET
Carry your Kingrinder K7 (compatible with K6 & K4) safely with this 3D-printed travel cap designed for a firm, reliable hold. Featuring a 6 × 2 mm magnet, it snaps securely into place while remaining easy to remove. Its lightweight and…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Přechody mezi vrstvami jsou 0,02mm pro lepší práci s barvením ve sliceru
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
This game gives each player 6 caps in different sizes. Large (Top or Bottom) Medium, Small, Mini, Micro and Nano. 12 Pieces can be stored in a Container with a thread to make it easier to travel. If you have a small pen 45mm long, you can…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Twinny Load Easy is a nice quickloading bikerack for cars. However with racing/gravel bikes the slope in the top bar makes your front wheel hang too low and it hits the ground (speedbumps). This extender corrects that. It slides in the…
Print approx. €3.99–€4.87 excl. taxPreliminary estimate for one variant
A Multi-Use Case can't fit every situation. Because of this, I designed this toothbrush travel case in the same style as my Multi-Use Case . I have designed it to be as compact as possible, but still fit as many styles of toothbrushes as…
Rails are designed for 6Gx20mm countersunk screws (or 4mm x 20mm)
PHILIPS OneBlade - Compact travel case 🔑 Key Features: Easy to Use - No Assembly, No Supports, just print and use. New and Original Locking system – Custom designed locking mechanism keeps the case secure, in addition the printed…
Cutlery Kit Card – Knife, Fork and Spoon. A compact cutlery kit card combining a fork, spoon and (child-safe knife) in a single, lightweight design. Created with a focus on comfort, compactness, and fast printing . The card format keeps…
So this is a gimbaled to-go coffee cup holder. Fully 3d printed, assembly is just spin the bolt in. Designed to clamp a bar 20-30mm in diameter, as well as flatter things, like dashboards, etc. The diameter should fit a large double…
FOR COMMERCIAL USE: Check here Introducing the Bum Buddy - your ultimate travel companion for a refreshing clean! Simply screw it onto any standard PET bottle like a bottle cap to get yourself a portable bidet in seconds! With its…
Sometimes you have enough toothpaste in the big tube, but not enough in the small tube. Solved. Sometimes you have a few small tubes that are almost empty. Consolidated. Sometimes you just want to connect two tubes together and squish…
Une boite a savon de voyage, facile a imprimer sans support. Réalisé en PLA, mais possible d'utiliser du PETG ou autre, avec une buse de 0,6 mm, couche de 0,2 mm. 1h50 environ. Travel soap box, print in place. No support. PLA or PETG Buse…
Small storage container for cremes, cosmetics, hair product etc. Great solution for traveling. Container has a 10ml volume. Thread is tuned for the corners of the lid to line up perfectly with the container when using PLA filament, fit…
🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…
These designs are compact containers to bring toothpicks or cotton buds with you. I was inspired by this model: https://makerworld.com/en/models/525669?from=search#profileId-447641 But it is completely redesigned to make it significantly…
Check the new redesign: Phone Holder V2 which features an even more compact design and no magnets required! (It does have stricter tolerance than this version tho, so keep that in mind) Description This phone holder is perfect for holding…
I wanted an adjustable pill caddy for traveling. I wanted something that could adjust based on the number of days I would be traveling. This model has 3 parts. Top (Lid), Middle (Mid), Bottom (Base). The middle part is threaded on top and…
An elegant smoothly rounded small box for cotton swabs, e.g. for travel, in multiple sizes. Shown is the 35mm version, it holds ~20 swabs (22 in the image). The 20mm version has a quite small lid that is a bit difficult to grip and open.…
This Case can hold up to 12 QTips. It allows you to take them with you, while being protected and kept clean.
This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…
Print in Place Folding Hanger Designed to fit on smaller machines while being sturdy enough for most clothing items. Changelog : 11/12/21 Release 11/14/21 Update: Curved files have been added. 3/8/25 Update: Removed confusing files,…
I DID NOT MAKE THESE I AM SIMPLY RE-UPLOADING https://github.com/Xyl2k/TSA-Travel-Sentry-master-keys 3D TSA "Travel Sentry" master keys Recently, pictures of TSA master baggage keys got leaked by the Washington Post and also PDFs hosted…
This Hangboard allows you to warm up easily before stating to climb outdoor. Depending on the infill percentage used you can make it super light or a bit heavyer but more durable. I used Prusament PLA in Black because it's good enough and…
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…
Doorstop Pocket Version – The Perfect Travel Companion Product Description The Doorstop Pocket Version is a compact, travel-friendly solution to keep any door securely in place. Designed for maximum portability, it fits easily in your…
This 3D-printed portable pillbox is a compact, multi-compartment storage solution for your medication or supplements. Its design features multiple compartments, allowing you to separate and organize different pills and doses, making it…
A print-in-place travel case for 2/4/6 Oral-B toothbrush heads (Vitality/Pro/Smart/…, NOT iO/Pulsonic), including 2/4/6 stands. Before that we just carefully placed them upright somewhere, but they often fell over. I had several…
Small screw cap container to keep little things inside of. I'm using mine to store ibuprofen but you can use yours to store whatever you would like as long as it's not too big :)
![[EN] Napkin Ring Travel/Airplane Theme [FR] Rond de serviette thème voyage/avion](https://media.printables.com/media/prints/9af40b10-ccd7-435d-8cd1-8d342eda60ad/images/9847238_d8e456b1-9ab3-4671-9fa7-5e2ffb4f86c5_319012ab-c052-4499-bfb6-6bac836509ba/render3.png)
