Search results: rba

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Garbage Can

I wanted a small garbage can for my printer scrap that could be printed in vase mode. The model can be easily scaled to any size. Update : I added a slightly lower res version so the file size is not so large. Don't forget to hit the Like…

Small Trash Bag Dispenser / Holder for 35L rubbish bags / garbage bin liner

Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…

Headrest for Thule Urban Stroller

The THULE URBAN is a jogger pram and the child lies more in the pram than sits. If you also use the carrycot for leisurely excursions and want the child to enjoy the view, you may occasionally want the child to be able to sit nicely…

Mini garbage bin for 3D printing waste (vase and normal mode)

Basics about this design: The design of this elegant octagon bin was actually done in a few minutes. Only after I had printed it from PETG, I realized that when printed in vase mode, the slight shrinking of PETG gives it an additional…

Strong vase mode garbage bin / can

Thanks for choosing this model! It is: Quite sturdy Designed to print using vase mode. A fast print (prints in under 2 ½ hours on a MK4). Remixable (with .step and .f3d files attached) Able to be used commercially / sold (see licence) I…

Razorback from THE EXPANSE TV show - 1:30 Scale (adaptable)

Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…

🗑 Garbage Can Vase

10/4 Update- Fixed model with handles, please re-download.

Door Hooks (expandable) / Tür-Haken (erweiterbar)

Door Hooks (expandable) Hooks for the door, which can be expanded as desired with the connectors. The dimensions of a hook can be seen in the pictures. There are three connectors, which allow a distance between the hooks of about 35, 55…

Replacement Beard Comb for some Philips Hair Clipper Beard Trimmer HC BT models peine barba

Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.

Burbaloni Loliloli - Coconut Capybara

Coconut Capybara – Burbaloni Loliloli edition! This adorable little creature is half coconut, half capybara, and 100% brainrot joy. Inspired by the Italian meme universe, this chill buddy is perfect for fans of the absurd and wholesome. ✅…

Toy Trash/Garbage Bin

Layerheight 0.2 The original is 50x50x100 mm and printed on a Mini. I have included two different lids. One with a trashbin-symbol and one without. I have also included a version which is 150% compared to the original. I have also printed…

Garbage bag clip

Simple garbage bag clip, guaranteeing that bags stay in place. PLA is recommended.

20000 mAh Powerbank

ATTENTION: Strictly avoid short circuit and wrong polarity !!! Part list: DIY powerbank modul 2.4A (e.g. from ebay) 4 Samsung INR21700-50E (21700, 5000 mAh) 4 hex screws M3 x 6 4 insert nuts M3 x D4 x L5 1 m flexible cable 0,75 - 1 mm² 2…

Garbage Bag Dispenser

Created a remix of this design. Main difference is that the original design was intended to be fitted below the top, while I wanted to mount it on the door. That resulted in a modified design. I used double sided tape to fit the holder.…

PAW PATROL Rocky garbage truck

tento model je pre postavičku velkosti 28mm pre vačšieho psíka treba vytlaťit vo velkosti 120%cca infil 20 perimeter 2 znak je tlačeny vo dvoch farbach

vase mode garbage bin

The settings i used where as follows: General: PLA, 0.4mm nozzle, vase mode enabled, 0.3mm layer height, three bottom layers Speed: 200mm/s external perimeters, 222mm/s solid infill, 120mm/s top solid infill, 40mm/s first layer, and 16…

Wavy hairband

Sorry for the bad example print, not use to the new filament. I used Autodesk Fusion to create the flat model of the headband. Then I curved it using Blenders simple deform, bending it around a sphere placed next to it. I then cut the…

German Garbage Truck with closing Lid

I Remixed my Remix: https://www.printables.com/de/model/298498-german-garbage-truck-mullauto Now the Garbage truck has a Lid, but i only works good now for the bigger Duplo Trucks, as it has become heavier on the back. But if you only…

BIKEMATE Adjustable bike light mount with Bikemate Mount / Justierbare Fahrradlicht - Halterung mit Bikemate Mount

Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…

Parametrierbarer Christbaumschmuck-Haken – in 6 Größen + anpassbare Fusion-360-Datei

Dieser hochwertige Aufhängehaken ist die ideale Lösung, um Christbaumkugeln, Dekoanhänger oder kleine Bastelprojekte stilvoll und sicher zu befestigen. Das Design ist stabil, formschön und speziell für eine zuverlässige Aufhängung…

Lay Z Spa Bestway Filter VI Separator for Filterballs

I've printed in PLA , no supports I'm using it with Lay-Z-Spa Santorini

fingerball card-kit

it is two simple goals and a ball in the fingerball table game. card-kit style you can use this card for a quick game with your work colleagues or at a party with friends

Urban Arrow Under Seat AirTag Holder

This is my first ever 3D printing model and I am rather proud. I noticed the other AirTag holder on Printables was far too discoverable for my liking. My previous solution to duct tape an AirTag under the seat eventually failed and the…

small table for window decoration/ Tisch für Fensterbankdeko

70x100x110 mm, um die Deko auf der Fensterbank zu erhöhen

Mini Desktop Garbage Bin with Lid - Sketch Free

A small bin to sit on the desktop to quickly throw away purge drops/lines and other small plastic stuff from the 3D Printer (or other things) as my large garbage bin is a bit further away (yes I'm lazy; I mean efficient). Should print…

Bride - Hairband / Braut - Haarreif

Bride - Hairband / Team Bride - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well…

Marking aid for spirit level parameterisable - Markierhilfe für Wasserwaage parametrierbar

For English scroll down. Wer kennt das nicht? Das Anzeichnen von Löchern mit einer Wasserwaage ist nicht unmöglich, aber oft etwas umständlich. Aber mit diesem Modell wird es zum Kinderspiel. Die beiden Teile werden auf der Wasserwaage…

IKEA STYRBAR SKADIS MOUNT

Since I have the metal mount that comes with the switch mounted on the wall, I needed a simple way to store the remote control near my printer. The project consists of two files, the actual mounting and hooks for SKADIS. Unfortunately,…

Erbauer ER2100 Router skid plate

This is a replacement plate for the bottom of the router. Can also be a starting point for other mods like a track sled for the router. I recommend printing in PETG for rigidity.

Florball Ball stand

I design a simple Florball ball stand.

German Garbage Truck - Müllauto

As the Original did not have a hole to put stuff inside(even though its hollow inside), i just added one. Also removed some Material at the Back bottom of the truck (to Improve compatiability and ease of use) Now IT fits also on the…

Car litter garbage can

The original litter garbage can from Škoda was too expensive for me. i constructed a simple bin for the car door. Please print using PETG because the interior temperatures in the car can be very high. It fits small POlastiktüten…

THULE URBAN GLIDE 2 - drzak polstrovani korbicky

Zajištění vnitřního polstrování korbičky proti sesouvání

Clash Of Clans Barbarian King Altar

If used as an coaster print it completely solid so no liquid leaks inside it

Hairband - Happy Birthday

I had to create this for a little one who had its birthday. Can fit seniors as well :) Easy print, no special handling… I printed in silk PLA

STOP WAR - Polish artist Barbara Galinska

Remodel of STOP WAR - Polish artist Barbara Galinska. https://www.instagram.com/barbara_calligraphy/ https://www.facebook.com/baga.kaligrafia/ Print it red, black.

18650 Powerbank

This is a powerbank ! It is designed to use four 18650 lithium-ion cells in parallel, providing up to 40 Wh on a single charge and supporting fast charging and USB Power Delivery. Materials: 4× 18650 lithium-ion cells with similar…

Steamdeck dock with Verbatim #66148 hub

I've had this hub for a while for office use but haven't had a use for it since I've upgraded to a new laptop. Rather than it go to waste, I figured why not use it with the Steamdeck, which only has a USB C port for expansion. Needed an…

Alza powerbank Skadis holder - uchyt na Ikea Skadis pre Alza Powerbanku

Simple holder for the powerbank from Alza on the Ikea Skadis jednoduchy úchyt pre powerbanku z Alzy na Ikea Skadis inner size of the holder is 60mm x 28mm x 33mm/height/ vnútorný rozmer je 60mm x 28mm x 33mm/výška/ link to powebank:…

Electric Tube Clip Holder 25 mm - Rohrhalter Halter für Elektrorohre (Skalierbar)

Simple to print. Holder for tubes used for power cables, e.g. 25 mm outer diameter. The clips can be scaled before printing / slicing, just calculate zoom factor to your wished tube diameter. Hole allows to use regular screws with a 45°…

Kleine vuilniszakken of ander plasticzakken opbergers. Small garbage bags or other plastic bags for storage.

Om kleine plasticzakken op te bergen in of op de kast. Om te kleven, vijzen of ophangen. Voor het ophang systeem heb ik de tussen latjes gekleefd. Voor die latjes heb ik er een Fusion 360 bestanden bij gedaan. To store small plastic bags…

The Sustainable Flowerbar

You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 Even though they bring a lot of joy to loved ones, cut flowers have a large CO2 footprint, especially in winter. The reason for this is the long…

Waste Garbage Can Bolt

if you lost your garbage can plug, here is a solution. Printed out of ASA against sun burn

Barbasol Shaving Cream Cap (10oz)

I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I noticed that after using this cap a bit the plastic on my can of Barbasol was a little bit scratched up so expect that, I'm working on a new version…

Eclipse starbases (8 races)

When I was printing ships and starbases for 1st edition of Eclipse, I found some usable ships ( https://www.thingiverse.com/thing:3141223 ), but not many usable starbase (only 3) designs to have a different one for each race. So I decided…

Handle tea bag holder (uchwyt na torebkę herbaty)

This set includes two models: Rim Tea Bag Holder – attaches to the rim (uchwyt na rant kubka) Handle Tea Bag Holder – hangs on the mug handle (uchwyt na rączkę kubka). The handle version allows you to adjust the height of the tea bag…

Garbage Bag Frame for DRONA Box

This is a frame that can hold a 50L garbage bag inside a DRONA box. It includes clips to keep the garbage bag from moving and a hanger part that can be used to secure the frame to the DRONA box. This model is a great way to keep your…

Ikea Hallbar Garbage Can Liner Ring (Rectangle)

This stupid garbage can liner…fell in my garbage and disappeared. The maker community has nearly everything, except this stupid ikea liner, so as my first contribution i have replicated one to do the job. i hope this helps someone Cheers,…

Plates to Mount an Urban Proof Crate on a Racktime Snapit Adapter

The Urban Proof crate I had bought before my 3D printer time. I had mounted it with hard rubber pieces as spacers on a Racktime Snapit adapter . I replaced the rupper pieces now with mount plates. With the two new mount plates, the crate…

SpiderBar

SpiderBar I wanted an additional supply of water and a way to test honey for our little jumping spider. There is a pause in the gcode to put in the 5x5mm neodym magnets. Mind their orientation! I printed on an orginal prusa MK i3 MK2.5 in…

Customizable Seed labels / Veränderbare Samen Beschriftungsetiketten

These are some quick to print labels for your seedlings. The labels are printed in PETG. I created two versions of the labels, one with a cutout letters and one with raised letters. Dies sind Beschriftungsetiketten für Samen / Setzlinge,…

Earpads E-bike helmet (Lazer urbanize)

Grid structure designed to create a rigid and slightly flexible support for earpads. It needs a piece of fabric stitched around to make it windproof, I also put a piece of cushion fabric in between to make it more comfortable. Put the…

Ceiling Curtain Rail Connector Clip fits UrbanRed

Made to fit the UrbanRed Ceiling Curtain Track Rail System https://amzn.to/43jKipe * * Amazon Affiliate Link

Adapter Woody Valley Airbag to Outdoor Mini Air Pump P01

Eine viel günstigere Variante zu dieser völlig überteuerten: https://flybubble.com/skywalk-permair-pump ist es, einfach auf billige China Pumpen * zurückzugreifen und sich diese bei mir perfekt passenden Adapter auszudrucken! *Affiliate…

MakerBadge stand

Fusion 360 source file is uploaded, now improved with parameters to change the space for battery (thickness and compartment size). The stand works on all versions of MakerBadge. The PCB is held by snaps in 4mm holes. To remove it, there…

Fold-down Handle for an Urban Proof Crate

With the fold-down handle, it's easier to shop with the crate because you only need one hand to hold it. The model is stable. In my test, it easily held 18 kg (two six-packs of 1.5 l bottles of mineral water). To put the handle together…

Shakerball 90mm Slotted hole for juggling/music

Originally designed by Guido van Hout, slightly remodelled with coarser threads and chamfered inside/outside to reduce overhang and seam size. Also increased size and added slotted hole. Note, while printing I had some internal strings…

aeberbach JNS remix semi-threaded

Remix of " Jigsaw nozzle storage blocks for M6-size 3D print nozzles ", I made a slight modification in the thread, so its a semi-threaded entry, that way you can press the nozzle until a point where a manual or slight threading can keep…

solder spool holder wall mounted right | Halter Lötzinnspule wandmontierbar rechts

(English below) @Shiba_Vindicator hat einen wirklich schönen Abroller für eine Lötzinnrolle entworfen. Leider kann dieser nur auf den Tisch gestellt werden (und rutscht beim Abrollen auf einem glatten Tisch einfach hinterher…) und ist nur…

Capybarbar

I recommend adding supports under the axe, the shield, and the capybara’s butt :-) I’ve also included a version with supports in the G-code file.

PSU-lock bewegen, wenn PSU-handle verbaut ist

Um einen PSU-lock zu bewegen habe ich mit OpenSCAD ein Tool gebastelt, dass den PSU-lock aufnehmen kann und einen Knopf dazugestellt, damit die Finger nicht abrutschen. <…

TRW Airbag ECU Cover Replacement - Ducat/Boxer/Jumper X250

Replacement for the airbag cover placed inside the cabin model year 2006+

Housing for 100 Watt Powerbank (Upgrade: Magnetic Cover)

Inspired by GreatScott!'s 100 Watt powerbank build , this is an alternative housing for the same components in a different arrangement (see pictures). Additional material needed: 4 x M4 50 mm cylinder head screws; threaded inserts.…

Rund Adapter Lenker Vorbau Canyon CP07 (and or other nonround cockpits)

You need to melt a threaded insert (4mm metric) to the upper part and screw it together. The hinge ha a hole for an 2mm metric screw with a screw nut. Maybe you need to tape the cockpit to avoid damage.

Chevy Suburban Backseat Latch

For older Chevy Suburbans with those spring-loaded push latches on the backside of the rear seats. Do not print in PLA. PETG or ABS/ASA would be best. Fusion 360 CAD files included.

Modular Bait Holder for 1x2 inch rail, smelly jelly and powerbait

A handy bait holder that clamps securely to a 1x2 inch rail such as found on many American boats. If you need a bigger rail clamp, you can easily modify the clamp part and not have to redo the entire model. This is due to the slide-in…

Original Prusa Enclosure MK4 Mülleimer vor dem Drucker / Garbage bin front

It's a garbage bin which can be placed in the front of the printer in the Original Prusa Enclosure. I designed it to use the free space in front of my printer within my Original Prusa Enclosure. Notes: I printed the objects with 0,2mm…

21700 powerbank- 20000 mah dual output/input

21700 power bank for charging phones, electronics, and for powering USB devices. The USB-A ports are 2 amp output apiece and the USB-C ports are 2 amp inputs and if you plug them both in you can charge the power bank twice as fast when it…

Lock for the Urban Proof Crate Fold-down Handle

The Urban Proof crate fold-down handle jumps up and down on bumpy roads. With the lock, the folded handle stays in place. To put the lock together and mount it on your Urban Proof crate, you need the following parts: 1 x M3 14 mm…

Pflanzentopf Halter für die Fensterbank

Mit dem Halter können Pflanztöpfe mit 100mm Durchmesser in 45° z.B. auf der Fensterbank aufgestellt werden

Tappy Rubberband for ROOK (also Legacy)

Based on the great tappy lite for the ROOK printer, this hotend offers the same abl and endstop function, just with an optical endstop. As I have noticed with my suboptimal CR10 hotend, the airflow of the hotend fan wasn't enough, so I…

3D modelování pro nejmenší - tvorba vázičky nebo misky v Doodle3D

Projekt představuje aktivitu na 1-2 vyučovací hodiny a seznámí žáky 1. stupně s prostředím online nástroje Doodle3D a provede je postupem modelování misky nebo vázy.

Vykrajovátko na linecké cukroví ve tvaru florbalového míčku

Vykrajovátko na linecká kolečka ve tvaru florbalového míčku. Vykrajovátko je oboustranné, tedy z jedné strany kolečko (spodní vrstva) a druhá strana je děravé kolečko (vrchní vrstva). Je potřeba zapnout podpěry. Fotografie je jen…

barbaro

barbaro

garbage can plug

A plug for garbage cans Print (PLA): 0.12 layer thickness 20% fill Tree supports at 65 degrees overhangs

Unterbau für D-link Hub und Kartenleser

Unterbau Mac mini Vorne für D-Link DUB-H7 7-Port USB 2.0 Hub (unterstützt Windows, Mac OS X, Linux)An der Seite für UGREEN USB 3.0 104MB/S Kartenleser 4 in 1 Kartenlesegerät für TF/MS Card Reader mit parallelem Zugriff auf 4 Slots USB…

Functional Print-In-Place Garbage Truck

Join the Patreon or Printables club! Or checkout my paid models ! The truck has a working lever for picking up the trash can and dumping its contents, a working back door, and rolling wheels for added functionality. The trash can also…

Rubberband Submarine - Print in place

Needs a properly tuned printer for the tight clearance. Before printing full submarine printing clearnance test is advised. Print both parts, add bolt to front of submarine, lastly add rubberbands. For best spin, try adding more…

Capybara Barbara

Meet Barbara, an adorable capybara with an oversized snout and a cute, chunky shape that's perfect for animal enthusiasts looking for a touch of wildlife. Her smooth lines make her the perfect companion for beginners and experienced…

Side Protection for Electrical Insulating Tape /Seitenschutz für Isolierband

If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…

Rubberband Gun / Rubber Band Pistol

Pokeball, MasterBall, Greatball - Pokemon

If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy! Easy to print and assemble Pokeballs. Assemble with superglue. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…

Barbarian - Male - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Barbarian Collection

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Barbarian - Female - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Desk Bin - Medium garbage bin - Trash

Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Medium Waste Bin Prints without support, perfect for your desk. Notes: All parts print without support.…

Compact Rubberband Spiderman Shooter (Web Shooter Style)

print in 0.1 to 0.3 layer height, prob best with petg or pctg but used bambulab pla+ basic print in place recommended: print with brim and supports works the best

Garbage bag holder top/side. Standard, Hexagon and Voronoi design.

Hi, This is my version of garbage bag holder. I sticked it with double sided tape on upper side of my cabinet. You can place it also on side. I prepared several models, inner diameter 51mm and 68mm and 51mm dual holder. Also you can…

Fixum Dude Motors Print in Place Garbage Truck

Introducing the FDM (Fixum Dude Motors) print in place garbage truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…

Mini Garbage Bin

no supports needed. prints well under most settings. stl for single color and multi color prints in files. Use filament for lid hinge with balled/flattened ends. Edit1: fixed a slicer error. repaired model and reuploaded

HairSnaps, The Modular Hairband!

HairSnaps! HairSnaps is a modular hairband with different attachments, allowing you to customize your band to your own style! There are a couple of different ways to customize your hairband: Ready-made snaps: I've made a couple of…

Jebediah Kerman (Kerbal Space Program) (IVA suit)

Jebediah Kerman from the game Kerbal Space Program in his IVA suit. the suit is a mix from the different suits that the game had along the different versions, cinematics and the ACES suit. I printed it at 250%, .08 layer height on my…

Thule Urban Glide 2 - Leg holder

Leg holder for Thule Urban Glide 2. Print without supports. You can cut model to smaller height.

Barbarian Collection

here be barbarians for your TTRPG needs

More durable spring attachment for no rubberband OTF

The current mount contains very thin walls, therefore it is very fragile, I redesigned the mount, now it is monolithic.

Horns on hairband

Improved V2 - better hairband connector see: https://www.printables.com/model/1446163-horns-on-hairband-v2 The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA…

Konfigurierbare Box (incl. Fusion File) - configurable Box

deutsch weiter unten english First of all, a little advertising on my own behalf: I recommend you take a look at my latest box with swing stopper (…

Rubberband Butterfly

This rubberband butterfly toy is a fun and engaging way to entertain children for hours! Simply wind up the rubber band and watch as the butterfly flutters its wings and takes flight. Perfect for outdoor play or indoor fun, this…

Barbarian Santa Claus

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…