8,216 models
Thanks Hello! I needed to make a few holes around the house to make some installations and dust was an issue. Decided to design my own guide and dust collector to make it look the way I wanted. It doesn't need supports! =) Hi again! I…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant
Use 3 walls, 25% infill. A simple drill-powered mixing attachment designed for stirring paint, coatings, resin, pigments, adhesives, and similar liquids directly inside cans or containers. The mixer attaches to a standard drill and helps…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
For IMPERIAL: https://www.printables.com/model/1371922-drill-guide-imperial This metric drill guide is the perfect helper for accurate drilling with bit sizes ranging from 4 mm to 10 mm . The guide is designed as a sturdy bar with clearly…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Use tree supports :) Want to have a commercial licence on this model? → Join the CLUB :)
Print approx. €2.90–€3.54 excl. taxPreliminary estimate for one variant
This is a set of Depth gauge for 5-12 mm drills. They have a opening for M3 nuts an cylindrical screws to tight the stop on the drill bit. Printed with PETG @ 0,2mm layer hight with 20% infill.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
The second version with improvements is available. Drill Dust Collector V2 Drill Dust Collector with Centering and Marking Features. The drill dust collector is an innovative accessory designed to collect dust during wall drilling with a…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
⚠ Important: Do not over-tighten the bottle to avoid damaging the print. Use tree supports only on build plate Introducing Drill Dust Collector and Guide V3 —the ultimate tool for keeping your workspace clean while drilling. This upgraded…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Angle drill guide Possible to print in 2 colors (with one extruder) => change at specific layer For max 8 mm drill Requires a 20 cm / 20 cm print bed
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
Hello. These are Makita 18V Battery & Drill Mounts that is developed through meticulous measuring and testing to get the design accurate and durable enough for everyday use. These were designed, developed, and printed for every day use in…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge. The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
This is a simple and easy to mount shelf for the corner of your shower. It is mounted with double sided tape and is big enough for 5-6 normal sized bottles. The design is sleek, simple and has a feeling that it is floating. There are…
Print approx. €7.63–€9.33 excl. taxPreliminary estimate for one variant
Standard Drill bit set wall mount .0625 to .5 inches
Print approx. €5.66–€6.91 excl. taxPreliminary estimate for one variant
Festool Mobile drilling attachment MB 40 - Accessories Do you already know our Mobile drilling attachment? The MB 40 mobile drilling attachment is your companion when precision is required. Print your own Festool Accessories for the MB 40…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Here is a version 2.0 of my simple drill guide (see version 1.0 here: https://www.printables.com/model/76157-drill-and-screw-guide-90-degree ). Upgrades: three part design, still no supports required compatible long and short drills now…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Attachment for vacuums to collect dust when drilling. Sticks to the wall while vacuum is on. Made for Ryobi portable shop vac (R18PV-0), but probably fits many others. Contact med for STEP files if you want to modify.
Print approx. €3.68–€4.49 excl. taxPreliminary estimate for PETGSource material: PET
Starting from the excellent existing model of drilling bounding ring I designed my own using parametric features from Fusion 360 and added nice features like printed diameter size I tested it from 4mm to 12mm drill bits (The range I…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Use Case : Printed at 101% scale to avoid any threading issues with my Dremels. Printed all four versions of the sharpener and was able to thread onto my Dremels without any clean-up or post-processing. Accessories : Dremel Lite 7760 -…
Print approx. €10.70–€13.08 excl. taxPreliminary estimate for one variant
Adeed stl file Other similar models are in the Dental collection: https://www.printables.com/cs/social/218199-thorin-oakenshield/collections/128338 Pla or petg , 0,1mm-0,15mm
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for one variant
Samy the spectacled snake Ich wollte einen einfach zu handhabenen Brillenhalter den mann gerne anschaut. Und so entstand Samy. Vergesst bitte nicht den Like, wenn er euch gefällt. Ich hoffe Ihr habt auch Spass mit Samy.…
Print approx. €7.41–€9.06 excl. taxPreliminary estimate for one variant
Grille aération pour tuyau P.V.C1 00 mm. Diamètre de la grille 93 mm Ext pour vide sanitaire ou autres.
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for PETGSource material: PET
With this slip-on tool you can easily sharpen you drills. it will slip-on the protector (1mm with) of your angle grinder. I printed it with PLA but i think it is better to print it with ABS. Use brim and full supports only on the bed…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Festool Drill holder – simplify your tool management Where do you currently store your drill? Print your own Festool drill holder and make your everyday work easier and more productive. This model was created in cooperation with The…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Vacuum cleaner sucker for drill holes, various tube diameters for various brands and models. The round opening for the drill allows enough visibility to work, while the vacuum prevents the dust from escaping, and holds the sucker slightly…
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for PETGSource material: PET
Another option for a floor vent cover for the rear-facing vents under the seats. Recommend printing in PETG or ASA, and move the seat all the way forward and up to clip onto the vent duct. Small tabs hold it in place. This has been tested…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Description: Enhance your drilling operations with this attachment that ensures a dust-free working environment. Its sturdy construction and integrated grid effectively prevent the spread of drilling waste. It’s the perfect addition for…
Print approx. €3.89–€4.75 excl. taxPreliminary estimate for one variant
I based the design on a model by georgeprout on thingiverse - I added space for two more bits Original stl and SCAD file here: https://www.thingiverse.com/thing:4395136 This is a bit holder for 6 standard quarter-inch bits for a DeWalt…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
It is not really an impact, it's more an indicator. Easy to print and easy to handle. Print it with PETG! Scale calculation: D(wish) /4,5*100% UPDATE: 22.12.23: I made the model a little bit stronger, because it is broken during drilling…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
I used PLA, would be better PETG. Supports for the handle cut are needed. Very simple to print.
Print approx. €5.78–€7.06 excl. taxPreliminary estimate for one variant
Introducing the Drill Dust Collector And Guide V2 , an upgraded solution for clean and hassle-free drilling! This new version features a larger container to hold more dust , an optimized design for better side dust capture , and the…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
$100 for velocity stacks. No thanks. These will fit all Challenger models from the SXT to the Demon as long as they don't have the light tubes installed. On some models, you'll need to reach in behind the headlight and push in the 3 clips…
Print approx. €8.72–€10.66 excl. taxPreliminary estimate for one variant
Drill debris & dust recover, the cleaning solution Updated! Supports: No Filament: PLA Time: 46m
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Drill Bit Ballerina Gru. (Part of my stupid dangerous toys collection) Tiny ballerina not included.
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
remix of: https://www.thingiverse.com/thing:3088281 This tool can be printed in PETG or PLA. It's perfect for wáter bottles or almost any other plastic container. Don't forget to post those makes!
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for PETGSource material: PET
This is an extended form of the known loud whistle, now with handle for a band and a print in place triller ball inside. You can/must losen the triller sphere in the inside with a little gentle force. Settings Value Infill 40% (adaptive…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Stand for dental drills for 10 drills 2,35mm Other tooth-shaped stands for drills, stands for pens and brushes can be found here: https://www.printables.com/cs/social/218199-thorin-oakenshield/collections/128338
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Opel Corsa D - Lüftungsdüse Schieber Adapter - Air Vent Slider Adapter - Fan Grill Slider Adapter
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
This is a thumb rest designed to fit on a Fender/Squier Jazz Bass or similar. It won't fit on a Precision due to the hole spacing being different. Since it uses the already existing pickguard screw holes no drilling is required. The…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
This is a simple tool to use when drilling holes with a hand held drill to help make sure the drill is held square to the surface. It also works on round stock such as dowels. To use the tool, simply position it where the hole is to be…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
This is a ventilation cover/grille designed for air inlets, outlets, ventilation openings or similar technical applications. The outer size is 280 × 220 mm . The model includes two frame-height variants: 8 mm and 12 mm . The lower mesh…
Print approx. €13.14–€16.06 excl. taxPreliminary estimate for PETGSource material: PET
Make drilling holes easier and faster with this 3D printable Adjustable Hole Marking Tool! This handy tool allows you to measure and transfer the exact distance between two mounting holes onto your workpiece. Simply adjust the sliding…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Installation: Print the two parts. Mount the base plate to the ceiling with double-sided tape (even normal tape could work if you make use of the 3 outer holes). Attach the cover by rotating it onto the base plate.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Ventilation grille for a wall mounted hot air exhaust with 120 mm diameter. You can print the cutout template to get the correct hole size with a Dremel.
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for PETGSource material: PET
As we would like to go to camping and sleep in our T7 Multivan (2023), we just needed something for the ventilation… Some kind of window adapter… So this is the result of our idea and my first own design This ventilation grille is…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant
This Model is designed to be mounted on different surfaces with M4-screws. It also has a self-locking-mechanism.
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
Intro This 3D printable drill guide helps you achieve straight and perpendicular holes when using a hand drill – no drill press required. Instead of fixed bushings, the guide uses removable and interchangeable inlets , allowing you to…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Ventilation grille 200x200mm for exterior use. Must be print in PETG UV resistent or equivalent. I used this grille to hide a Ø150mm ventilation pipe. I instal an anti-insect mesh between the grille and the wall.
Print approx. €10.38–€12.68 excl. taxPreliminary estimate for PETGSource material: PET
Just a quick model of the Tampa Bay Lightning Gasparilla logo.
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
This is a simple template I created to mark the wholes for hinges for Ikea Pax system. You will need also a 35mm cutter for the big whole, the smaller wholes are 5mm, go slow because the thickness of the fronts is only 18mm (ask me how I…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
I designed this drilling jig to assemble my BESTA cabinet doors on a METOD cupboard. Align the end of the jig with the end of your cabinet (your cabinet door ends here). There is a triangular cutout to mark the middle of the hinge, so…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
I needed a organizer for my drills in metric. All the rooms in the organizer is marked with raised numbers the hight is 1mm. The drill organizers starts at ø1mm to ø13mm and the rooms jumps 0.5mm and is split into 3 sections that connects…
Print approx. €6.46–€7.89 excl. taxPreliminary estimate for PETGSource material: PET
There are two versions: vortex and bowl. When you drop many marbles into a bowl they may block each-other and get stuck in the bowl. Vortex has the least chances of self-blocking marbles, while maintaining a wide opening at the top. Bowl…
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for one variant
The Air Handler System - Fans and Grills - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have…
Print approx. €2.96–€3.61 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Gorilla family with children to the zoo, to the diorama or just to play. Very nice animals. It is suitable for coloring. My children absolutely love it :-).…
Print approx. €8.32–€10.17 excl. taxPreliminary estimate for one variant
TL;DR first: This is very taxing on your printer! The mesh consists of a lot of intersecting shapes, and so this means a lot of movement and retractions. Be advised that you should make sure that your printer is maintenanced properly.…
Print approx. €12.55–€15.34 excl. taxPreliminary estimate for one variant
140 mm fan grill with hexagon pattern
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
There are lots of dust catchers out there for drilling into drywall walls. But I had to drill holes in my plaster ceiling. A lot of them. So I built this. It worked great for its main purpose. I have since parameterized it so it should…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Simple ventilation cover. OpenSCAD model included so you can adjust dimensions to your needs. Recommended print settings Resolution: 0.2 Supports: No OpenSCAD OpenSCAD file requires BOSL library ( https://github.com/revarbat/BOSL ) to…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Jednoduché valcové puzdro pre sadu 3-och kusov "stromčekových" vrtákov z balenia LIDL Parkside. Pridal som aj kryt s anglickým popisom "STEP DRILL". Ak sa ti model páči klikni na srdiečko a keď ho vytlačíš pridaj foto a ohodnoť…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
You can use the organizer with Allen keys, drill bits and screws sizes from 1.5 to 5 mm, the holes are automatically adjusted to the needed diameter so no trying to find the right space, just stick it there. In the video I imbed magnets…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
If you're tired of cranking up your guitar when changing strings, print the adapter, connect it to your drill, and in one sec you are ready to play. Printed in PLA. 100% infill. Print horizontally for extra strength.
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
EDIT: 24.4.2023 - added step files Needed for assembly: 3pcs M3x10-12 16pcs M3x20 !!! The gasket is only needed for wall mount version !!! PDF schematic with dimensions are at the bottom of the file page. Print instructions Recommended…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for PETGSource material: PET
By bringing this little tool up to the drill bit just before you pull the trigger, it ensures you have a hole perpendicular to the work. The inscription includes a drafting symbol that calls for perpendicularity. It looks like a “T”.
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Allows you to use Duplo blocks to support Quadrilla Marble Run Structures
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
This is a modification of Stamos's remix of the Tripod Mobile Phone Clamp. A base plate for GorillaPods was added.
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
Printing Parameters: Resolution: 0.2 mm Perimeters: 3 Infill: 15%
Print approx. €8.96–€10.95 excl. taxPreliminary estimate for one variant
First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
📝 Description 🌴 Abstract Minimal Animals – Jungle Duo (Low Poly) This set includes two powerful minimalist low-poly jungle animals designed in a clean, modern geometric style: Gorilla and Hippopotamus . The models are intentionally…
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
eine schöne alternative zum ewigen Brille such ja wo liegt sie den zum ja meine Brille ist auf dem Elefanten gedruckt mit 15 % infill und einer 0,4 nozzel ist der Elefant in es knapp über einer stunde beim MK4S gedruckt. Habt spass damit…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
This is used to add certain drill and bit indexes to your MODbox. I believe DeWALT and Craftsman have similar cases that stack together. This allows bigger items to be attached to the outside rail while giving you more space inside your…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Summary This is the air intake grill for a Toyota snorkel. Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: Standard Infill: 80% Filament brand: Creality Filament color: Black Filament…
Print approx. €4.95–€6.05 excl. taxPreliminary estimate for one variant
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Inspired by https://www.printables.com/model/227397-portable-drill-guide , I modelled this drill guide matching my Metabo PowerMaxx SB from scratch. Properties: Max. drill diameter 4.5 centimetres Max. drill length 16 centimetres Base…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Here are a couple drill guides I created to help out with my daughter's Eagle Scout Project. I don't have an extensive wood working shop. I have a tiny benchtop drill press, but it is not large enough to drill holes through 8" of wood…
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for PETGSource material: PET
This drill bit case is inspired by the hexagonal drill bit set from Hilti. I liked the design but already had a few drill bits so I didn't want to buy a whole new set for the case. So I made a similar design :) This case is quite simple,…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for PETGSource material: PET
Ukrainian Cyrillic Alphabet
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
a simple drill guide for standard 3 or 4 inch door and drawer pulls to aide in getting everything square and clean. Printed here in PET-G since it is a tool and may get exposed to heat. I made this for a bathroom installer.
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
Simply scale the model according to your preference. Obviously, no supports or brims are required for printing. I added some extra perimeters for additional rigidity.
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for PETGSource material: PET
2"/D50 pipe fitting for probe/sensor/injector holding onto pipe. It has been made with two typical pipe-threads - G1/2 and G3/4. You can look into my other models, where you can find temperature probe sensor shaft for this fitting or…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
grill or wall art fancover 140 mm fancover 120 mm
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
A simple mount to keep your Ryobi drill or drive packs under a shelf. Use two business cards as a spacer between one mount and the Ryobi pack to get the spacing right before screwing into your shelf.
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to make better use of my Dremel Drill Press workstation for other pressing tasks without compromising stock utility. The system consists of a dummy rotary tool head that mates with the press and will then accept future…
Print approx. €6.99–€8.54 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print, any print settings will work fine. Dimensions of the hole to be made on the door: width 180 cm, height 40 cm with an arc radius of 40 cm. Ventilation grille model for 1.8 cm thickness One tip: if you want to apply glue…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
I kept having the problem that the clamp on my cell phone holder in the car came loose. With the "ball holder for ventilation grille" everything holds. What you need: screw nut M 3 Countersunk screw M 3x 30 Printed parts: 1x Base_**x*MM…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Designed using a TBS LUCID stack, and a quadmula frame. The frame uses M2 screws to mount the stack, this is unlike a lot of other frames. TBS's own 20x20 adapter will not work for frames like this. The lucid stack already has threads for…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
After removing the original venturi tube out of the airbox, i designed a grill to cover up the hole and to protect the air filter. It has the same contour as the original tube and can be attached with the original screws. It should fit to…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
with vacuum connected drill holes on most surfaces to reduce dust. will fit shop vacuum.
Print approx. €10.21–€12.48 excl. taxPreliminary estimate for one variant
Whaaaat? Guerrilla Hook is a small, 3D printed hat and coat hook designed to be placed into a public toilet for visitors to enjoy. Website: https://guerrillahook.com/ You can use it for coats, hats, (small) bags, or anything else you need…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
I searched for a drill chuck and the possibility to store 6 fine drills in the handle. I could not find one that fit my needs handle diameter <18mm to fit in my RC-Tool Box (not ready yet ;) store at least 1 drill within the handle so it…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
While there are custom heat set insertion presses, often including a cheap soldering iron it seems like a waste of resources if you already own a high-quality soldering iron or even a soldering station and a drill stand. The only missing…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
Turn your workbench into a professional station! This multifunctional 3D stand is perfect for installing threaded inserts, soldering work, and micro-drilling. Ideal for those who want practicality, organization, and a flawless finish in…
Print approx. €8.52–€10.41 excl. taxPreliminary estimate for one variant
Here is my glue caddy that holds the glues I frequently use. This will hold the starbond super glue set along with the pump action accelerator and a couple of gorilla glue bottles.
Print approx. €15.72–€19.21 excl. taxPreliminary estimate for one variant
It is important to let the print cool down properly so that it is not damaged during removal.
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Meant as a base for custom cloth grills for the Spark Mini. Will also work just on their own. I prefer version 2 if you go that route.
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
A simple bracket to enable you to use your pillar drill as a heat insert press. I was going to print one of the many designs of heat insert press tools available but then thought why not use my drill press and not have another tool top…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Wall Mount for ENT Wooddrills with countersink
Print approx. €5.62–€6.86 excl. taxPreliminary estimate for one variant
