Counting matching models…
Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…
Expand your car or truck cup holder to secure a regular coffee mug or 32oz hydroflask. Center also can secure a can of Red Bull. Bottom is enclosed so the insert can be secured to the car cup holder. I used some velcro tape. Mugs that fit…
This multipurpose car cup holder can hold just about any kind of bottle but will specifically hold must types of Hydroflasks up to 32oz. Due to cutting out as much material as I could and and having everything at an upward angle, there…
This is remixed from Stefan's holder for the ProFlight 2 to fit over the headset clip in the Airbus A320 series (possibly other Airbus models that share this clip?). This version also adds a headset hanger. Print upright (with the cable…
A simple adapter to fit a standard sized Hydroflask in the Tesla Model 3 cupholder. A clearance cut ensures it won't interfere with the other cupholder. The base is hollow allowing for extra storage while reducing material usage. Edges…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full South Park collection here: South Park DeskBuddys – Full Cast Collection by CheekyTomato | Printables.com Rate, 🟠like & comment …. Of course this you…
This adapter will keep your Hydroflask from flying around the car. Simple print. Fits snugly around a 32 oz Hydroflask. Model files are provided in case you want to modify to fit a custom bottle. Parametric Design.
Designed for the 40oz / 1.2L HydroFlask bottle. Measurements of the section that goes into the car's cup holder: Diameter: 7.5 cm Height: 5.72 cm
I designed this insert for 2022 Rivian R1S (it's incredible). But like most vehicles, there is no convenient place to hold a 32oz water bottle. If you love your Hydroflask or Nalgene bottle, you know what I mean. The same goes for…
UPDATE 8/24/20: I've added Fusion 360 and STEP files for easier remixing. Sorry for not adding them sooner! I'm not hardcore about my bike nor about bike stuff, but I do care about having a good water bottle with me when I ride. So I made…
This is a simple holder for the ProFlight 2 to fit over the headset clip in the Airbus A320 series. Print upright (with the cable cutout on the build plate) and supports on the build plate only. 15% infill works fine.
This expands the front center console cup holders to accommodate a 32 or 40-oz hydroflask in a Toyota RAV4 Prime. It may work with other RAV4's as well. Please use it at your own risk, as I take no responsibility if it causes any damage…
Your favorite fractal sculpture! now halved, with a long flat base so it can be a bookend! Please consider supporting my hobby. You will make my day! (excuse my sloppy Photoshop, I haven't been able to print it yet) This was generated to…
This is a macro version of the microfluidic gradient generator technique (and geometry) presented in Cabaleiro 2020, doi:10.1016/j.cej.2019.122742. Ref. the supplemental data (3d models are included there). This could be promising for…
This model is specifically designed to fit in a 2016 Ford Escape cup holder but would likely fit in other vehicle cup holders.
Yes, this is yet another bottle drying stand. This one is specifically for Hydroflask and compatible bottles, such as Takeya and EcoVessel. I found that the universal ones didn't keep the bottle from falling over if it shifted to the…
I also did a “fuzzy skin” on the one in the photo. Same as my other model , but with bigger triangles. Same story. Don't resize . If you want custom sizes, send me a message. Slicing Instructions: There are hairline gaps in strategic…
Nat has a great design. I wanted to hold it up! This short pedestal gives the big Octahedroflake-6_[Echo] a place to live! It fits nicely. Find Nat’s Octahedroflake-6 [Echo] here:…
Perimeters: 5 Printing upside down No supports needed
Remix of the existing adapter from Tex. Modified to fit a large hydroflask that's fitted with the protective boot.
I needed a cup holder for my water bottle on my 8040 sim rig, but all of the ones I could find online were sized for 1L Nalgene bottles, which are quite a bit narrower than my 1L insulated hydroflask bottle. This one has an internal…
Model designed to fit securely into the front center console drink holders in a 2018 and newer Ford Expedition. It also works with newer F150 models, just not as perfectly. The model will accommodate most one-quart water bottles and…
Karamzadeh, V., Sohrabi-Kashani, A., Shen, M. & Juncker, D. Digital Manufacturing of Functional Ready-to-Use Microfluidic Systems. Advanced Materials 35, 2303867 (2023). https://doi.org/10.1002/adma.202303867
I needed cupholders for the middle seats of my Tesla Model X. This fits the 2020 6-seater seats and hooks onto the seat next to the seat belt holders as shown in the picture. The cupholder size is designed to fit a 32oz or 40oz…
This model is best printed in TPU or another flexible filament so it still protects your hydroflask. I printed the one shown in Overture TPU at the following settings on my Prusa mk3s+: Layer height: 0.2mm All speeds: 20 mm/s Infill:…
How small of a channel can you print? Try with this test model.
Small test bench for adjusting servo travel directions and simple motor setup. This small bench was inspired by "RC video review": https://www.youtube.com/watch?v=1S74TF4YutQ&t=1086s I started from scratch to make it more general-purpose,…
AeroFlow 360 is designed to provide unobtrusive airflow in interiors. With the fan oriented upwards, it creates a gentle stream of air that supports natural circulation in the room without disruptive drafts. The heart of the device is a…
Thank you GarageMonkeySan for this well designed and practical tool! The original, and this remix, are shaped for fridges that dispense water separate from the ice. **If you have a combo Ice/Water dispenser, which many modern fridges do,…
Microfluidic ELISA chip Scan the QR Code to view the video of the chip in operation. Shafique, H. et al. High-resolution low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices. Lab on a Chip (2024).…
Embedded microfluidic mixer Shafique, H. et al. High-resolution low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices. Lab on a Chip (2024). https://doi.org/10.1039/D3LC01125A Category: Engineering
I created this model to hold a full size hydro-flask in the Mustang Mach-e. This model hangs off the side of the console, leaving the other cup holders free for other beverages. I recommend you use this cup holder on the passenger side…
Decorative hardware for your Proflex. Comes in different designs, feel free to remix and add your own. Some of them haven't been tested so I don't know how they'll come out. If you make them I would love some feedback so I can continue to…
A vibrant keycap inspired by Kyle Broflovski from South Park. With his bright green hat and expressive face, this design perfectly captures his sharp wit and strong personality. Great for fans of the show and collectors who love classic…
3-piece modular cup holder for F-150 Inserts anchor down into existing cupholder using built in spring clips and expose M5D8L9 heatset inserts on top, spaced 4.5" center to center. Cupholder itself fits silicone booted hydroflask/Nalgene…
Ive always hated having my hydroflask rolling around in my truck. Designed a basic extended cup holder to allow me to secure my hydroflask/thermoflask while driving. I found a lot of the other models around just didnt fit my vehicles cup…
This model is based off of the real product, Microflame Torch which is used by Jawas and Luke Skywalker to repair droids in episode 4. It's also seen used in the more recent show Andor by Bix Caleen. I am also working on having it modeled…
The ProFlex Visor is a flexible visor attachment designed to add glare reduction and environmental protection to ProFlex-style airsoft or paintball masks. The geometry extends forward from the top frame of the mask to create a functional…
Insert for a HydroFlask Boot for containing an Apple AirTag. This model is two separate discs. Outer disc to be printed in a harder impact material, PLA, PTEG, ASA, ABS. As well as an Inner disc to be printed in a softer cushioning…
This was designed for my sister's 2007 Honda CRV. I think it would probably work for any 3rd gen CRV, so 2007 - 2010. This is an adapter so a Nalgene or Hydroflask, or similar sized water bottle can fit in the cup holder. The V1 model was…
Rings print with no supports. Handle can print without on a dialed in printer, however, adding supports only means you need a little clean up if you want that assurance of no dangle strings. Multiple sizes available to accommodate slight…
Retroflag GPi Stand Remix Changes: Removed text Removable back 4 back parts to choose (with SD card storage, regular and shorter versions of both for those with modded L and R buttons) enjoy! Category: Video Games
Yafia, M. et al. Microfluidic chain reaction of structurally programmed capillary flow events. Nature 605, 464-469 (2022). https://doi.org/10.1038/s41586-022-04683-4
This is a extension for a cup holder to hold a 32oz Hydroflask. There are two parts to print and you can use CA glue to join them together. This was designed for a 2021 Ford Explorer cup holder. The base extension reaches to the bottom of…
Didn't want to shell out money for a flimsy Hydroflask boot made of silicone. I decided to test my dimensioning skills and make this to add to my resume for personal projects. Enjoy. Printed in PLA. Use whatever settings you normally use…
Revision 2.0 Notes: Changed default parameters to improve fit and function. Reduced height of cap to 16mm. A TPU straw cover designed to fit the 10.5mm diameter silicone straw on the 40oz Hydroflask cup. The model is parametric so it…
HD mount made for the Runcam 5 camera and the impulseRC APex frame. Has a slot for ND filter. You do need to use supports. best printed on the side. Print in TPU.
Karamzadeh, V., Sohrabi-Kashani, A., Shen, M. & Juncker, D. Digital Manufacturing of Functional Ready-to-Use Microfluidic Systems. Advanced Materials 35, 2303867 (2023). https://doi.org/10.1002/adma.202303867
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
Yafia, M. et al. Microfluidic chain reaction of structurally programmed capillary flow events. Nature 605, 464-469 (2022). https://doi.org/10.1038/s41586-022-04683-4
This is a simple replacement lid for Hydroflask water bottles with a “standard” width mouth. Without a rubber ring, the lid doesn't form a perfect seal - you still get a tiny bit of leakage if the bottle is tipped. Print with minimal…
Bring the iconic redhead from South Park to life with this amazing 3D printable STL model that captures Kyle's distinctive winter hat and unmistakable charm! This detailed figurine showcases Kyle's classic pose and features, making it…
Yafia, M. et al. Microfluidic chain reaction of structurally programmed capillary flow events. Nature 605, 464-469 (2022). https://doi.org/10.1038/s41586-022-04683-4
If you leave your hydroflask in the car, make sure you print with PETG or another high-temperature plastic. PLA will deform in the 140F temps of a car on a hot day.
Made this one a little larger to accommodate the rubber boot.
This model was used in the following publication: https://doi.org/10.1021/acsearthspacechem.2c00328
Karamzadeh, V., Sohrabi-Kashani, A., Shen, M. & Juncker, D. Digital Manufacturing of Functional Ready-to-Use Microfluidic Systems. Advanced Materials 35, 2303867 (2023). https://doi.org/10.1002/adma.202303867
Prints in two parts should fit snugly in any mid 2000's ford center console. Here's the exact Flask I have Amazon Link should work with any 32oz flask but that is the one i made it for.
This pedestal holds the amazing Sierpinski triangle 3D analog designed by @Nat_ Made to fit snug on the base of the 145mm version named Felix. Printed on P1P using ELEGOO Black PLA
I'm a pretty simple guy: I just want to be able to wake up in the middle of the night and drink my water from a straw without making a huge mess. Unfortunately, I'm also an idiot who keeps knocking over my water bottle every time I try to…
Das ist der Halter der den Co2 Abgabeturm im Aquarium mit dem Saugnapf am Glas hält. Hab ihn mit ABS und 0,2mm Schichthöhe und Supports gedruckt. This is the holder that holds the Co2 delivery tower in the aquarium with the suction cup on…
Small stand for the Octahedroflake - Ivy . I've included two different versions depending on whether you're using a 0.4mm or 0.6mm nozzle. Use the correct version for your nozzle size to avoid generating "top solid infill" on the topmost…
I dropped my full 24oz hydroflask and damaged the base enough that it would not sit flat on any surface. It was like a weeble-wobble. After adding the boot, the bottle is stable again. I printed this out of Eryone 95A TPU on a MK4S using…
This a cup holder adapter for a 2018 Nissan Rogue. It holds the bottle at an angle for easier use of the arm rest. The is an optional lip that can be glued in place to hold the bottle more securely. I would recommend using it though the…
Upgrade your Hydroflask game with this sleek, functional funnel designed to make filling wide-mouth bottles a breeze! Whether you're transferring water, smoothies, protein shakes, or any liquid of choice, this funnel ensures no spills and…
Nalgene/Hydroflask mount for the Uppababy Vista stroller.
This is an odd creation. My daughter lost her ThermoFlask, we walked around her entire school and never found it. I got the bottle as a 2-pack from Costco, I didn't want her to lose the other one and be forced to buy another two. So I…
This plate was designed to quickly install in the tiny front cup holder area of the Audi Q5. It has a ridge to accommodate quart-sized water bottles or normal coffee/tea mugs. Note that a water bottle can still tip over with spirited…
WARNING – Doing this with FFF printing is super challenging. Resin printing is most much better for forays into microfluidics endeavours than FFF printing. This is a calibration plate for diagonally printed microfluidic channels with…
The brackets were broken, so I designed this bracket/holder myself. Print Settings Supports: No Resolution: 0.15 Infill: 100% Notes: I recommend printing this in PETG How I Designed This Onshape…
32oz Hydroflask adapter for 2016 VW Tiguan Cupholder . I included a custom support from original model in 3mf with 0.2mm gap modified for: sparse infill, no top, and no perimeter (break away was trivially easy). Made in Polymaker ASA…
I needed a case for my Retroflag GPi Case 2W when I travel. Therefore I created this case. It perfectly fits this fine game console. Game console: https://retroflag.com/gpi_case_2w.html
This 3D printable ring fits securely around a Hydro Flask wide mouth bottle and provides a built-in loop for attaching a paracord handle. It's a simple, rugged solution for carrying your bottle on hikes, at the gym, or just around town —…
I have used Hydro Flask and Coffee Mug MODULAR Car Cup Holder Adapter by strongcraig on Thingiverse for my full-sized hydroflask, but I needed something to stabilize my 32oz Trail Lightweight version (skinnier) so I created this insert…
This cupholder was originally too narrow and kept tipping over in my 2016 Kia Sedona cupholder. First I had made a TPU sleeve to fit the original design and that worked well (upload coming), but when the cupholder itself got stepped on…
Yafia, M. et al. Microfluidic chain reaction of structurally programmed capillary flow events. Nature 605, 464-469 (2022). https://doi.org/10.1038/s41586-022-04683-4
No support needed,there is 2 model with B737 text included. Scale can be used for better joint. I am using it daily and abs printed was really succesful.
Here is a remix of @Nat_ 's Octahedroflake model that includes a hollow shaft down the middle. This is the “Penelope” size model (about 100mm tall). I used transparent filament to 3D print the model for maximum light transmission, then…
Revision 2.0 - Made wall thickness 1.6mm, reduced diameter by 0.5mm for an interference fit, repaired a parametric design error with the top edge fillet. This boot fits the 40oz Hydroflask cup with silicone straw (as seen at Costco). It…
Karamzadeh, V., Sohrabi-Kashani, A., Shen, M. & Juncker, D. Digital Manufacturing of Functional Ready-to-Use Microfluidic Systems. Advanced Materials 35, 2303867 (2023). https://doi.org/10.1002/adma.202303867
These clips will allow you to easily use a Proflex (other other "universal") strap on the Empire Vents family of masks (E-Vent, E-Flex, Helix). The stock mask clips could also be used, but have two issues: 1) You need to cut off the…
Stand for the long (15" or 380mm) Hydroflask bottle brush . All 3d-printed objects soak up moisture like a sponge--bottom is concave to reduce the contact surface with a wet countertop. Added "stripes" to the model as extra bodies, for…
I needed a holder for my 40oz hydroflask that sits beside my desk and not on top of it. I have a small and tight space so my table would always be a clutter. I designed this to help clear my table as well as having a storage for my water…
I have a Canon SX50HS, it's a bridge type camera. I bought a FlashRing - Macro (model: Aputure Amaran Halo AHL-C60) It came with many adapters, unfortunately they were all to reflex type cameras. So I design this adapter... Works like a…
HydroFlask 32oz bottle cupholder for Tesla Model 3 Highland center console. This is remixed from the original file on Printables to get the basic shape of the center console, and then redesigned around my water bottle. This is designed to…
Box used for storing “organ on chip” chips in the freezer/refrigerator after staining. Small design for easy storage or to be placed in door shelves. One box fits six (20 x 38 mm) chips. Print box with supports. 3 sizes available, in case…
Created with FreeCAD. Printed with Prusa Mini and: cheap white PLA 0,25mm layer hight 2 perimetes 15% infill turmberg Heatbreak (so my g-code uses M301 code so I have to ZIP the g-code file) feel free to take it, keep it and remix it.
Handle variants help with sliding on a surface to pick up or rotate. Non-handle version is still adequately accessible and manoeuvrable, and fits within the footprint of a full tray (handles stick out of the footprint by a couple of…
A simple standing remote holder for the SIT Proflame 2 fireplace remote. No supports required. Two holes in the bottom if you'd like to screw it into a wooden mantle etc. Can be printed out of Wood PLA & a rich, realistic, wood-like…
Bottle holder for storing nalgene, wide hydroflask, and other water bottles.
This is a design for a rain lid to fit the JT Proflex QLS only.
Cover for the Proxxon burner to avoid damaging or accidential ignition
Keeps dirty hands/fingers from touching the flask lip that ends up being put in our mouths. Also keeps my cats' noses away from it :) Category: Sport & Outdoors
I designed this ringlight for my photogrammetry setup. The ringlight suits 6.7mm diameter camera lenses. Just let me know, if you need a different diameter. You will need 32x3 5mm LEDs, 32x 100Ohm Resistors and a 12V Power supply and a…
Kyle Broflovski (South Park)
This insert allows you to put your 92mm diameter Hydro flask in the cup holder since the factory one is not big enough.
I wasn't satisfied that the mug walls would hold up to minor abuse, and I prefer things to be a bit overengineered. Worked with an AI to make changes, since I still haven't figured out CAD. Added 2mm thickness to the mug walls, and a 5mm…
Printed in TPU using a Bambu Lab P1P. Supports needed for design.
I designed this cup holder adapter for the Ford Expedition, was sick of the hydroflask not fitting. I designed up a couple variations some with a flat bottom or concave incase you want to fill it something to make the bottom heavier to…
![Pedestal for Nat’s Octahedroflake-6_[Echo]](https://media.printables.com/media/prints/602630/images/4794838_924c7de1-25c5-4e26-bf72-af1d9a52b59c_22dffeb0-8750-4c8f-86db-a3b1404ec66e/img_0550.jpeg)
