Counting matching models…
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
Combined the ams desiccant tray and the Dry Pod with hydrometer models into a single print. A day after setting this up with fresh desiccant beads ( https://www.amazon.com/dp/B013L31PQ0?psc=1&ref=ppx_yo2ov_dt_b_product_details ) the…
The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…
Print your own 3D printer filament Dry Box! Check out this video I made about it, including assembly instructions: Parts are optimized to work best with PLA filament. Easy printing, no support material needed. Snap-fit rollers, hygrometer…
This is a stand for the round common Hygrometers. I designed it specifically to fit into the middle of the Bambulab AMS (tested with new version, bought in 2023). Of course it can also stand alone anywhere else. Secure fit, Hygrometer…
I had changed all my box to v3, please use my AMS dry box center v3.3mf for print. If the hygrometer(some is so big) is a little small, please use same paper to fit it(I used it in photos). For drying Bambu AMS box, you can directly add…
A filament dry box that mounts to the side of the Elegoo Centauri carbon based on the design of @NaNO3 which was originally based on @Yanev 's parametric toolbox. I have included versions for the lid that work with or without the addition…
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the printbed. Click here for a smaller version of this stand! If you like check out my other designs too!
This is my model of the Prometheus from the Stargate SG1. Once again the model is done completely by me, it is a kit where you should not need any glue (except for repair maybe). The assembly is much simpler then the 304, but still, I…
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
I was frustrated by the need to re-attach the screws to the standard Creality bracket whenever I need to run input shaping with my Sonic Pad. So I created a version which simply slots in (firmly) to a semi-permanent bracket on the…
Hygrometer holder suitable for the ACE Pro from Anycubic. The holder fits the super cheap, round hygrometers that you can find everywhere on Amazon, Ebay or AliExpress. The hygrometer can be read through the lid of the ACE Pro and does…
I've been using the great silica boxes designed by SoftFever (https://www.printables.com/model/269545-slica-boxdry-box-for-bambulab-ams) inside the left/right slots of the Bambu Labs AMS and the thermometer/hygrometer stand by maddtt…
Small stand for Bambu Lab AMS unit to hold a hygrometer. The Hygrometer was purchased off Amazon and was a "JEDEW mini hygrometer"
Update June 12, 2023 A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs…
A combined desiccant and hygrometer holder that slips into the pour hole of the lid of a plastic dry goods box. I like this approach as it is neater than using baggies. With this setup, I can get internal humidity down to 10-15%.…
This is the first of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is my Mark II X-303 Prometheus from the show Stargate. The model is improved version of my original model and this time comes with several features. It has one hangar bay open and in it, there is an F-302. It has retractable landing…
A minimalistic stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. The bottom is labeled, pay attention to this when inserting the hygrometer. A larger version of this stand:…
Thanks Extrutim for the original design! I searched a nice place for the original stand and saw my skadis board... So I added two hooks and ventilation holes. As simple as that.
This model inherits the characteristics of PsychProd's original model: Fast print speed due to the clever basket design, great air permeability, and the option to add space for a hygrometer. In-spool locking: The one thing that bothered…
This is a slight modification of a great Drybox made by Dynarun to add a hygrometer in the front. You could also use my universal drybox plug to make it airtight when not in use. Required Parts Print basis.stl from this project, and all…
The original design is good. However, I am an engineer so I designed a few improvements for the design (make it more functional, less filament, repairable, etc) and saw several people in the original and remix comments had some good ideas…
This is 3D printable model of the Promethes Clas NX-59650 Prometheus from the Star Trek. The different colored parts are separated for easier printing. Pieces of some details need to be separated into separate models in the slicer ;) The…
Remixed version of a pretty flower/plant pot modified for thicker walls.
Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…
Modeled in Fusion 360, face down, no need support. It has two “buttons” that will fit the left 2 holes at the back, so it stays in place. Angled up a little so you can look in from the top glass. The last firmware update allows you to use…
UPDATE 7/9/2020: Thanks for the comments here are the printing instructions - Print the containers close end down. Non-Hydrometer lid the closed side down. The hydrometer lid print with grip side up. UPDATE 7/1/2020: -Added…
This is a magnetic hydrometer mount for enclosed Bambu Lab printers. It was designed for a 40mm hydrometer and uses 2 6x3 magnets. The magnets should press fit in (with some elbow grease) and it mounts to the rails on the sides of the…
Printed in PLA black to achieve a nice and strong print is printed facing down, textured and smooth beds are giving very differents finishes. Link to the thermohygrometer available on amazon:…
Stand for micrometers. I just added a little longer screw for a better fit to the original model. Update Nov. 2022: For enough strength use PETG and print the Screw and Nut with 100% infill to make them stronger. For more grip and less…
Modular desiccant/silica filament spool size container. Optional top to hold Hygrometer. I like to store one to five roles of filament in a ziplock vacuum seal bag. I wanted a desiccant holder that could grow or reduce depending on how…
Pretty much the same as: https://www.printables.com/model/67857-fast-print-in-spool-desiccant-silica-gel-container But increased the overlap to make the wall stronger without impacting print time. You can see this in the 4th picture that…
hygrometer holder under the shelf. Can be screwed under the shelf or just placed on the shelf. The hygrometer itself is inserted in the frame and the holder is screwed from the bottom of the shelf. The hygrometer frame can be easily…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Please consider leaving a like. or just take it and slink quietly out the side door. NOTE:- If you intend to keep the rubber strip that is already affixed to the printer frame (where the glass rests normally), then fitting the shallow…
Scorpion Heterometrus silenus Remove the supports gently
Hygrometer stand, holder, for module.. Add open for battery
A simple print to allow you to insert a small round hygrometer into the lid of a Chef's Path brand cereal container for use as a filament drybox. The insert fits inside the top lid seal (since you won't be pouring anything out from this…
This is a remix of @Raymond's ‘ Hygrometer house for Prusa Core One’ but instead of using the 20x5x2mm or 20x6x2mm magnets this uses (up to*) four 6x2.5mm round magnets (other magnets will work as well, like 2-3mm in height is confirmed…
changed the design a bit so it fits secure and doesn't move when handling the box thinned the walls a bit (seperate file) to accomodate a bigger spool (up to 66mm for bambu lab spools for example) WARNING! the walls are quite thin, handle…
In order to use the Klipper firm through the Sonic Pad on the Creality Ender-3 V3 SE printer and the vibration sensor for vibration compensation, you need parts to connect the sensor. This data is a guide case file for connecting a…
I Just made the lid with a hole instead of the original This way you can fit a round hygrometer/temperature meter in the lid, and keep an eye if the desiccant still is god, or if it needs to be dried some more you can find the hygrometer…
I had already designed a exhaust solution for the Adventurer 5m Pro ( Removable Exhaust Duct for FlashForge Adventurer 5m Pro by Simon | Download free STL model | Printables.com ), so wanted remove the exhaust filter and cover plate. I…
UPDATE 31/12/2022 A minor update to the design to make printing and fixing the magnets easier. Description A magnetic bracket for the thermometer/hygrometer, for the Bambu Lab AMS, ARC for P1P, and the airtight box. BOM 6x3mm magnets -…
The full spool filament desiccant container is designed to hold comfortably 2 pounds of silica gel beads (leaving 30% headspace in the spool). The idea here is to maximize the amount of silica gel in the AMS while minimizing the number of…
Bracket for securing the ADXL345 accelerometer to a V6 nozzle. Available in both heat-set insert and thread tapping types. Required: One M3x10 screw and two M3 screws of appropriate length to secure the accelerometer.
WHY? The existing AMS dryer pods by STprinting are great for the outsides. For the middle slot, I needed something to fit my Xiaomi Mija Hygrometer , of which I had a couple lying around. UPDATE v2 Based on your feedback, I strengthened…
Front loading desiccant boxes for AMS. These slide in and out without having to remove the filament to change out the desiccant and I also added a hole for an hygrometer. Hygrometer I used is 44mm in diameter…
Put a hygrometer into your favorite Silica gel spool container with this remixed cap. The hygrometer snaps into place, sits tight and secure and can also be removed. Height has been increased by 11.5 mm. With hygrometer inserted, the…
The original Ender 5 S1 fan guard is made of metal and weighs appx 50g. Replace it with a lightweight 3D printed version that has a provision to mount the accelerometer from the Sonic Pad for input shaper tuning. You can see the install…
angled mount will fit small and bigger thermometers, with openings from 12mm up use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4…
This design allows you to convert an off-the-shelf cereal box into a dry box for your filament, equipped with a hygrometer, removable jar of silica gel and a bowden-coupled output port. The box is hermetic and will maintain anywhere…
The Input Shaper functionality on your Original Prusa MK4/S, MK3.9/S or MK3.5/S can be calibrated using an optional accelerometer . You can find more information about the accelerometer here . Print instructions Download the latest…
Modeled for Ender-3 S1 Pro using right-hand stock fan mounts. Reuses stock short M3 from shroud to mount the sensor, mated with a M3 x 4mm brass insert. Requires M3 x 8mm, possibly 6mm, to replace the repurposed shroud screws. Amazon US…
Stable Micrometer-Stand I have built myself a stand to make it easier to use my micrometer. A piece of flat steel is embedded in the base plate so that the stand is stable and has a decent weight. To prevent the stand from sliding back…
Update 23/05/26: added mirrored version to fix battery hole issue Update 11/12/24: added cutout for battery cover to make replacing the battery easier, model now has built in supports that should be removed before assembly Print Settings:…
Stand for the round mini hygrometer / thermometer from Amazon or Aliexpress, that fits perfectly into the Bambu Lab AMS. It is slightly higher than other stands so that the humidity is measured close to the filament. I printed it in PLA…
Print with round part lying down on the bed. 0.3 layer height , with a brim. No supports needed. Place to stand in the middle vertical slot of the AMS box
Micrometer Stand To use your micrometer properly , you need to put it on a stand, so you have one hand for the screw and one to hold the object to measure! Works best if the handle of your micrometer is about 11-16mm thick ! Additional…
-So far testing has not shown a significant difference in sample readings, although not enough sample data has been collected. Will edit as it goes- After noticing where the hydrometer sources the air samples (sides and back), I wanted to…
Use case / Problem description Monitoring the relative humidity in your filament boxes is essential. After a while the silica (or whatever you use to keep the air dry inside the box) will be saturated. Your filament will no longer be dry…
A simple small stand to hold the round hygrometer/temperature sensor. I needed a stand to place the hygrometer in my bathroom to check if hummidity levels are ok. I printed mine without supports with 0.20 mm and 15% infill. The Hygrometer…
The housing is for a rectangular hygrometer which you can place inside the Prusa Core One using either 20x5x2mm or 20x6x2mm magnets. Fits either left or right hand side of door, or any other place it will stick. No glue necessary to hold…
Remixed version of a magnetic hygrometer mount for Bambu Labs X1/P1s/P1P printer with push-fit holes for 10mm magnets
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…
About This container holds small silica gel beads efficiently and securely. It is designed to print fast while still allowing for good airflow. There is an optional lid version that fits a hygrometer. Lids screw on easily and securely. 3D…
Easy to print angled mount for the JEDEW Hygrometer from Amazon.
Hi, I made brackets to test my Sovol SV06 Plus with Portable Input Shaper from FYSETC. This specific one is slightly easier to use - requires only USB-C and flashing firmware to it. There were no brackets available for SV06, so I decided…
I bought a pack of 8 of these hygrometers for a filament dry-box storage project and had few left over. I wanted to have one of the leftovers out next to the dry-boxes to show the difference between inside them vs outside. So this is a…
A Prusa gyorsulásmérő doboz könnyen nyomtatható. A fedél kétféleképpen készíthető, felirattal vagy anélkül.
Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
Hygrometer Case for AA or AAA Battery ✨ Now even smaller! ✨ These cases for a popular mini-hygrometer are designed to hold a long-lasting AA or AAA battery instead of its supplied button cell batteries. Compared to the two supplied LP44…
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my over engineered Y Axis captive mount for the Fysetc Portable Input Shaper ADXL345 USB C Accelerometer bed mount. It's designed for ANY PRINTER with a PEI…
Recreated based on PsychProd's basketweave/quasi-vasemode concept here , as well as its remixes (e.g. #5204468 , #5168851 , #4976590 ) and the cited prior works (e.g. #4508179 ). The idea is great, but perhaps it was limited by the method…
To use an ADXL345 (possibly similar), and a Raspberry Pi Pico as an input shaper for Klipper systems as a secondary MCU. Programming settings, and wiring were pulled from NERO 3D and the following video:…
I liked the OP's idea of using infill for the sides of the boxes. Dramatically reduces the print time, and still provides great functionality. Since I run a small print farm and needed to make parts for 8 AMS units, the reduced print time…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
Printed Using 0.4 Nozzle Layer 0.2 Infill 10% Wall 3 Layer Button 3 Layer Top 3 Layer No Support Need Using Same screw (Optional) For nice flush on the glass add ironing
Remix - This design allows you to convert an off-the-shelf cereal box into a dry box, equipped with a hygrometer
A simple stand for Veanic hygrometer, because I couldn't buy just one. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: Doesn't Matter Supports: Yes Filament: 3D Solutech PLA White Category: Gadgets
I found that the STL's Creality provided for mounting the accelerometer packaged with their Creality Sonic Pad would not work with a Micro Swiss NG so created one. With very little area on the NG for a mount to work, I chose to utilize…
This is a simple mount to attach the KUSBA USB accelerometer to a 3d printer bed up to 7 mm thick. All you need is a few M3 screws and one nut. Check out my universal hot-end mount
I couldn't see the numbers on the hygrometer very well inside the enclosure so I made up a couple stands for them. The models have a hole in the back for airflow to reach the sensors. This is the link to buy the hygrometers…
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. Micrometer: https://amzn.to/3WaB8pG My other Gridfinity Designs: 1/8" Endmill Holder:…
Fits pretty much any standard-sized 28x47mm clip-in hygrometer or thermometer. There are two versions. One as a free-standing 45° angled stand and one that is made to be sticked to a clear container (filament storage/larger drybox) using…
This is a replacement cap for the Chef's Path Airtight 135.2 oz. Cereal Storage Container that will allow the addition of a Hygrometer and a PC4-M6 or PC4-M10 Pneumatic Fitting. to make a Filament Dry Box Container. The hole for the…
Model is designed to hold a hygrometer safely in the chamber of the Bambu X1 Carbon. Please double check that your side support has the stamped cavity before printing. The holder is designed to snap onto that cavity to stay secure.…
[Addendum May 1, 2022 : Added optional components for metal clamp screw. See below.] This is not a remix, but it is inspired by this print by Steven Nelson :…
Honeycomb Storage Wall Mounts for some common Thermometer / Hygrometers: Xiaomi Mijia Aqara WSDCGQ11LM Common Rectangular Hygrometer All print in given orientation without supports. ♥ Looking forward to your makes! ♥
Mount your Kusba ADXL345 USB accelerometer quickly on probably any toolhead directly to your nozzle to get most accurate readings BOM (I used for my build) M3 20mm x 2 M3 6mm x 2 standard 5mm Threaded Heat Set Inserts x 4 Please let me…
Magnetic Mount for ADXL345 Accelerometer This design is a detachable mount for an ADXL345 accelerometer to be used with Klipper 3D printer software for measuring resonance for its Resonance Compensation (aka Input Shaper) feature. The…
I had a handful of spare Weewooday brand hygrometers (bought on Amazon) that I decided to put to use to monitor conditions in my print room. They pop right into the bracket and are indexed by slots in the back to prevent them from…
Here's my door handle with hygrometer design for the Anycubic Kobra S1. It can be used like standard screws. ---- Hier mein Türgriff mit Hygrometer design für den Anycubic Kobra S1. Es können wie Standartschrauben verwendet werden.
Thickened the side walls that hold the hygrometer. The one I printed with the latest Bambu Studio had no side walls until I checked “Detect thin walls”, but it still fell apart before I could assemble it. Also added a ledge so it snaps in.
A stand designed for the temperature and humidity meters often found in online stores. It replaces the stock case to deliver a clean, ultra-minimalist look. Required other than printed parts: 1x Thermometer/hygrometer Disassembly…
A simple stand for a common Humidity/Temperature sensor. These sensors are widely available from eBay, Banggood, AliExpress for around 3 USD. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No…
