Counting matching models…
Update (July 13th, 2022) After receiving feedback about mounting the shield and the occasional break, I have decided to strengthen a few parts of the design to prevent breaking during support removal, slipping off the left mounting point,…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
I suppose that this stl may be useful to other n4 users also. This is ment to be a temporary fix. Mine extruder lever broke apart just after only a few filament changes. If your extruder starts to make clicking noises during the print, it…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for PETGSource material: PET
As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Size: 82mm x 52mm x 41mm Filaments: PLA Mystic Brown (brown) and PLA Vanila White (white) Note: All parts need to be glued.
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
This lightweight rotor-style visualizer mounts onto the shaft of the Ender 3 V3 SE's silver extruder stepper motor. Designed for effortless visual monitoring, it rotates as the extruder motor turns, clearly indicating direction and speed…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Until today, I missed the right extruder motor movement visualizer ;) Do dnes my chyběl ten správný ukazatel otáčení motoru extruderu ;) Print instructions No support, simple print... In this case PLA. Bez podpor, jednoduchý tisk. V mém…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
These holders hang from the XL's side extrusions to store your extra Nextruder nozzles. When the nozzle is in an extruder, the holder becomes a label that clips on to the extruder to remind you which nozzle is currently in use. The .3mf…
Print approx. €3.74–€4.58 excl. taxPreliminary estimate for PETGSource material: PET
After having a bunch of problems tunning the stringing problems on my GeeeTech A30T, I found out that seems to be a common problem with the printer in question. After seeing a bunch of solutions relying on lowering the extruders from the…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
This Extruder Visualizer, unlike most of the others you will find, will help you center your magnet thanks to the centering lip that will also collect the extra glue. This Extruder Visualizer is also designed to ensure a good clearance…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
I needed a safer storage for my spare nozzles so i made this to replace the plastic bag the spare nozzle came in. This is for a single nozzle which i prefer over boxes with multiple nozzles in my sparepart kit. Easy print, text can also…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
was expanded from the original with a pressure shell. Since I couldn't print the steering wheel with supports to satisfaction. Printing without supports or anything like that. After the printing break, remove half the steering wheel and…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Preview: At the moment I am working on a version that lights up a bit brighter. As soon I got the values I`ll post it. Description: It is a combination of several Persons and remixed for my need: Used 3mm Green and Yellow LED with 2mAmps…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Description: I needed a storage solution for 1 extra Nextruder hotend and something to store spare/different Nextruder Nozzles. So I remixed the model of Relive93 to store 1 Hotend and 4 Nextruder Nozzles on a Skadis pegboard. Print…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Direct Drive Extruder Assembly for V6 Hotend and CR10S PRO Dual-Drive Extruder for Creality machines Needed: 2x Short screws M3 1x Long M3 screw 1x Slightly Longer M3 screw 1x M3 short screw/glue - attaching angled fan holder piece Parts…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
Any Metroid fans around? Here is my take on Samus' emblem that you can use as an extruder indicator. Print in PETG or PLA with 100% infill and glue 2x 8x3mm magnets to the back of the print. For multiple colors use print stops where…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Ersetzt die orginale Exruderplatte und ermöglicht die Lüftermontage an dieser. Ihr benötigt kürzere Schrauben für die beiden NEMA Motoren.
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Noch ein Extruder-Wheel... ;-) Gibt ja so gut wie keine... :-) Print instructions Die GCode-Datei benutzt F1 und F2 der MMU2S.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
It's a simple Portable Input Shaper bracket for the Bear extruder. For the X axi, the bracket take place on top of the front fan. For the Y axi you can simply use paperclips.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
A direct replacement of Sigma R17 extruder lower bowden tube housing
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
The Multicoloured Christmas Bookmark is designed so that you can print it in two different colours with a single extruder printer. No supports needed I printed with 20% infill but shouldn't make a difference if you used less. I have…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolhead Well, give this little mod a try! In my case, I found the most common…
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…
Disclaimer: Due to duct tips having close vicinity to the nozzle, use at your own risk of failed print depositing globs covering/melting the ducts. Low-profile part-cooling duct for stock Creality Sprite Sprite-Pro extruder 40x40 part…
Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
This is the first design I made in my single extruder - dual color series. My final design is out right now and takes this principle to a whole new level: Single Extruder - TRIPLE Color - Sleepy Cat ! And now back to the cow This is a…
This cable chain ( SPINE ) supports the extruder ribbon cable on the Sovol SV06 3d printer and stops it from sagging on taller prints. There are three special pieces for the ends of the spine. Refer to the pictures for correct placement,…
Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…
Remake of the Creality Vibration Sensor for the E3 V3 KE Printed in PLA
This mount is designed to hold the cable from the Creality Sprite Extruder Pro kit. The model referenced in the documentation fit poorly, had sharp edges, and looked bad. This design is cleaner and fits better, while holding the cable…
" Anycubic Key " 2 Tools in One Extruder Tension disengage tool & Proximity Sensor height tool. Disengage tool allows you to disengage extruder tensioner. Gives you the ability when you load your filament all the way without having to…
🚀 MMX OG — Serial Number Registration Now Open! We’re officially opening serial number requests for the MMX OG (4-Color) Multi-Material Extruder . If you’ve built one and made it work — this is your moment to make it official. 🔩🔥 Each…
On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented (heat at 250 degrees for 5…
- Prusa Print files added! - Presenting you: my iteration of a Roll up Chess set! Please like, share, download, rate and all the amazing good stuff :) I have seen many roll-up chess models, but none that would fit my needs. What I really…
(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
Size: 55mm x 69mm x 43mm Filaments: PLA Jet Black (black) and PLA Vanila White (white) Note: Some parts of the model may need to be glued. Organic support recommended.
Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.
Attention: These files are for version MK2. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed otherwise the function of the extruder may be impaired. The…
Background As many of you have found, it is easier to swap MK4 Nextruder nozzles in-place rather than to disconnect and swap out the entire heater block. Problem In-Place Nozzle Swaps pose some amount of risk in that you have to hold onto…
CHECK OUT MY NEW RELEASE → 5015 Hot End Fan Upgrade for Ender 3 S1 (Pro) + Sprite Extruder Design: I have created this model with the following considerations: dual, symmetrical airflow under the nozzle to be as light as possible- weighs…
The stock part cooling fan and duct only cool the part from one side. This is my take on part cooling fan duct that directs air from three sides. I printed mine out of Prusament ASA. I print flat with tree supports 06/12/2023 Update:…
Attention: These files are for version MK3S light, MK3S and MK3S+. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed therwise the function of the extruder may…
An extruder guide for Flashforge Adventurer 5m Pro to avoid scratches on the inside of the cover. The bottom part is made flexible to follow the extruder tube in any direction, while at the same time hold it down a little bit. Make sure…
This is an S-shaped dual clip designed to organize and hold two tubes in parallel. in this case, the extruder cable and the filament tube for the FlashForge AD5X 3D printer. Shape: The S-shape forms two opposing curved channels, each…
Extruder Visualizer for Ender 3 V3 SE Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 10% Filament : PLA
Handy tool for every soldering station. Accepts standard syringe style flux cartridges. Turn the know for precise extrusion. If you have trouble with bed adhesion while printing the screw, there a few tips: slow down use 'external…
The mockup available only has the external shell and lacks any of the gearbox elements that would allow interesting repacks to be designed like what has been done for Sherpa mini and HGX extruders. I completed the CAD based on…
This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
This is an extruder visualizer designed for the Original Prusa to replicate the iPad settings/downloading icon. It would likely fit others as well. It is for use with 8mm rare earth magnets. I added a photo of the brand I used that was…
Attention: These files are for version MK2.5. Please check which hardware you have! Please read these instructions carefully. The requirements must be followed, otherwise the function of the extruder may be impaired. The Original Desktop…
This is a holder for your HotEnds / Nozzle and spare Extruder, as well as some necessary screws/Mounts. The last of the top row holders is for a fully assembled Hotend/Nozzle with fan & silicone sock. Update 12/23/22: Added new version…
This is a small clip for the extruder cable. I was not satisfied by less fixing of the extruder cable of my i3 mk3s. The textile cable sleeve easily gets out of the original clamp and then the cable slack rubs the printing bed slightly.…
This is my 2025 iteration of my multi color slide together Easter Eggs! But this time with an extra twist One has an extra color added and the other is one of my previous designs that now twists together instead of slides together! Here…
Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…
Remix of the amazing design of Lmaker . Added a part to be able to compare/finetune the Z-axis (offset) as well. This is a 10-15min print to make life easier when calibrating the X, Y, and Z-axis of (independent) dual extruder 3D…
Attention: These files are for version MK3. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed therwise the function of the extruder may be impaired. The…
Printable without supports. Designed for GDSTIME GDB5015 24V. Unobstructed homing. Complete replacement for stock extruder cooling. V2: lighter design. Fixed cracking issue at screw hole. Requiered Hardware: 1x M4*20 1x micro JST plug…
Creality Sprite Extruder Model
ProtoXtruder Latest update: 2024/12/12 An extruder that utilizes the large extrusion gears of HGX-lite gear kit and comes with the mounting pattern of the Sherpa Mini Extruder . There is also an untested version for Bondtech LGX Lite…
About This articulated dragon is my design. It's made especially for the Single Extruder – Dual Color contest. In my opinion, it's cute and well flexible. You can make it as long as you might even want! The parts fit together well. The…
This is a file to make it easier to interpret the X-axis and Y-axis calibrations Este archivo es para hacer más sencilla la interpretación de los desfases del eje X y el eje Y Print this file with the first extruder ----…
This is the tool file provided by Bambu Lab copied to Printables. Instructions here https://wiki.bambulab.com/en/x1/troubleshooting/extruder-clog
The rod that goes into the extruder idler gear on the extruder arm likes to come loose. this will fix that. i have to push my pin back in after long prints or i end up with extreme under extrusion. this keeps the pin from getting to that…
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…
This filament sensor has many advantages : It facilitate the filament change operations. When filament is detected by the sensor that triggers an auto load material function. Since we don't use the rear filament sensor, the reverse bowden…
I got tired of waiting for a warranty replacement extruder housing for the Creality Ender 3 V3 KE after it melted after a big blob of death on my friend's printer. So I reproduced the design on my own (in SolidWorks). I changed a few…
Ender 3 and 3v2 or others using same motor. This is my X-Large version Extruder Motor Knob. ❤ Get your Prusameters… Post your Makes! ❤ You can find my other matching knobs here: Drawer Knob:…
I share this case just for DIY and fun, so don't use for commercial and don't ask me for step files Haldis HGX-LITE-extruder gear kit https://www.aliexpress.us/item/3256804512828973.html have to sand the 16mm shaft to 14mm Or buy 3mm…
For more detailed info, watch the YouTube video: The modified nut may not be needed. The modified lever is a drop-in replacement that shouldn't cause any issues but may resolve issues with poor grip on the filament.
I still had some black showing on my printer so I made this Extruder Indicator for the Ender 3 V3 SE. I love watching it spin around when printing. https://www.facebook.com/KD9WNR/videos/734574294767306?idorvanity=347538964267031
This modifications of the original prusa MMU2S extruder, were the only way i could make it work properly (for me). It has been really frustrating months, there is a lot of ideas you can find searching in forums, i tried all of them and…
Model of a traditional hot air balloon. The cool part is that the balloon part is divided in 12 sections of the same size which you can click together with a pin-hole connection. You then use the ‘Bottom’ file to keep them all in place.…
Compatible with: Extruder : SKU M3201 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers SKU M3203 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition) Hotend:…
ProtoXtruder 2.0 Last update: 2024/04/19 The sequel of ProtoXtruder ! With the new gears of HGX 2.0 Extruder (affiliate link) , it becomes thinner and lighter while providing the same benefits of the large-sized gears. Although it is…
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
This prevents the filament on the ender 3 cutting a line in its plastic extruder. Uses the bolts on the brass z-axis rod holder. Dont over tight it as it can result of your z screw rod to not rotate. Open slot for easier filament…
Keep an eye on your Sovol SV06 extruder movements with this extruder visualizer/motor knob that adds a touch of style and personalization to your printer. With the extruder movements on the SV06 and SV06 Plus often difficult to see, this…
Basic Description This is a remix of a CR-Touch mount. https://www.printables.com/model/255096-sprite-extruder-ender-s1-pluspro-cr-touch-mount-fo I redesigned it for my Ender 3 S1 Pro. Reasons for remix The original had its X-offset…
An extuder motor indicator made from a 3D Printable Jet Engine's fan by CATIAV5FTW - scaled down to 25%, with a cone or without. Link to this awesome printable jet engine here: Thingiverse There are three versions: With an integrated cone…
This is a drop in replacement for the stock K1 extruder to fix underextrusion and add a tensioner. I do recommend replacing the extruder if your machine is still under warranty. With no long term testing, I cannot speak to the longevity…
Work in progress. Be warned, this model may contain some inaccuracy on the gears position. This model is meant to be used as an asset in CAD software, not to be 3d printed. Creality K1 Assembly CAD Model Change Log 08 October 2023 Release…
Extruder ribbon cable strain relief cable guide Fitting a cable guide to your printer allows the ribbon cable to flex gently over its length rather than bending all in one place - which can lead to broken wires. This unfortunately is a…
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
Cyclops Guide by ModBot ( Thank you for the great video ) Latest Update 22 September 2024: -Version 1.9.1 with better tolerance -PTFE tube connector -stronger tension arm ----------- Exciting News: Cyclops Extruder is Now in Open Beta!…
Extruder Halter mit Filamantsensor Aufnahme
Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…
Bracket for the free screw hole on the right Side. Only mounted with one screw. For the G-Sensor of the Sonicpad
This egg prints the easiest and quickest of all of them, needing no infill or special slicer settings. Just print both parts in any color you like and slot them together! Have a look at my 2025 edition as well, with an extra TWIST (link)…
After learning about the rotation indicators for the extruder motor, I loved the idea, but I didn't really like any of the designs I was seeing. I wanted a gear/cog but couldn't find any I liked. So I made my own, I just wanted one but…
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
Hummingbird Extruder A compact extruder design that has the same form factor and mounting pattern as the Bondtech LGX Lite . It utilizes the large extrusion gears of HGX-lite gear kit to accomplish high gear ratios and good filament grip.…
A while ago I saw an extruder indicator consisting of a hamsterwheel and a silhouette of an hamster in it ( https://www.thingiverse.com/thing:3139180 ). I re-designed the wheel from scratch, took a pikachu model from Thingiverse (…
A simpre mill extruder visualizer. No magnets required. Just push it to the extruder motor shaft. EDIT: Print at 98% scale Remixed from: https://www.printables.com/model/152587-mega-extruder-rotation-visualizer-bundle/files
This is a transferred project from Thinigverse - creator: techboner Link: https://www.thingiverse.com/thing:3176144 This is the best knob I have found and works perfectly for my Ender 3 v2, was hard to get onto the stepper motor but…
![M3201 Ender-3/CR-10 [Micro Swiss NG Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/708060/images/5554855_c8f0442f-02a2-401d-a399-6c8e5d4b0216_3490802f-a225-4f60-a8a5-b4a7a32cb31d/image1.jpg)
