P
PrintablesCodyG
Lexus IS300 Cupholder, the full replacement
Install instructions and the original launch video here:
- Downloads
- 835
- Likes
- 42
- Rating
- 5
Search results: s300
Counting matching models…
P
PrintablesMaurizio Lenzi
GoBo projector for Bowens mount flash (Godox MS300V)
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
- Downloads
- 594
- Likes
- 92
- Rating
- 5
P
Printables6d6178
BAHCO Combination Square Holder for Ikea Skadis, CS150, CS300
This is a holder for BAHCO sliding combination squares CS150 and CS300 for IKEA SKÅDIS pegboards . It uses Skadis T-Nuts for a very secure mount. For CS150 there's a single and a double version for one or two combination squares…
- Downloads
- 346
- Likes
- 49
- Rating
- 4.75
P
PrintablesÖhrkie
Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700
Hier eine Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700. Diese wird lediglich auf den originalen Behälter gesteckt und der originale Deckel kann weiterhin verwendet werden. Die Lautstärke des Mahlwerks wird nicht…
- Downloads
- 336
- Likes
- 10
- Rating
- 0
P
Printablesmsobadger
Underware / Multiboard TP-Link Kasa HS300 Smart Power Strip Brackets
Custom brackets for under-desk mounting of the TP-Link Kasa HS300 Smart Power Strip. bsed on the amazing Underware system from @HandsOnKatie_827995. I used Katie's power strip parametric as a starting point, but had to modify the power…
- Downloads
- 316
- Likes
- 50
- Rating
- 0
P
PrintablesHans
Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source
This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…
- Downloads
- 291
- Likes
- 116
- Rating
- 5
P
PrintablesNotLikeALeafOnTheWind
Futaba S3003 servo mount for 8020 series 10
A mount for a servo on an 8020 series 10 extrusion. Print instructions Unassociated tags: Series 10, servo mount Category: Electronics
- Downloads
- 279
- Likes
- 18
- Rating
- 5
P
Printableskjbturok
Remix PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY WITH USB PORTS
This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…
- Downloads
- 271
- Likes
- 27
- Rating
- 0
P
PrintablesCodyG
Lexus IS300 Cupholder, reversed
Same as the original, just reversed with the big hole towards the shifter.
- Downloads
- 254
- Likes
- 22
- Rating
- 0
P
Printables7h3 0n3
Polar RS300X Adapter Plate - Updated
As many other users the wristband of my Polar RS300X broke. Therefore I designed this adapter plate so I can mount any 20mm wide wristband to to watch. After cleanly cutting off the rest of the original wristband you can directly mount…
- Downloads
- 248
- Likes
- 3
- Rating
- 0
P
PrintablesScott
DPS3005 (DPS5005) Power Supply Case
I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as: DC barrel jack input Tilt the front panel up to make the display…
- Downloads
- 224
- Likes
- 38
- Rating
- 0
P
PrintablesDrjkcy
2003 Lexus ES300 Key Fob Housing.
After (my wife) dropped the key to the 2003 Lexus ES300 one too many times, the key/fob housing broke beyond repair. This is a replacement housing. It turns out that the shape of the main key and the spare key is different at the housing…
- Downloads
- 208
- Likes
- 16
- Rating
- 0
P
PrintablesStarwhooper
1liter extra coffeebeans for Siemens EQ.6 plus s300
Add one liter volume for extra coffee beans Category: Kitchen & Dining
- Downloads
- 203
- Likes
- 26
- Rating
- 5
P
Printableshandro
Kasa HS300 Power Strip Mount remix center hole adjustment
Adjusted the hole in the middle as my Kasa HS300 has an extra part of the cable strain relief that protrudes. In the pictures it is 16mm and a very snug fit. In the uploaded 3mf I adjusted it to 17mm to allow for wider variance. 3mf is…
- Downloads
- 201
- Likes
- 16
- Rating
- 0
P
PrintablesCodyG
Lexus IS300 cupholder - two matching holes
Just like the title says, this time its symmetrical
- Downloads
- 177
- Likes
- 12
- Rating
- 0
P
Printablesfcauwe
Mobile power supply (DPS3005) with black and decker battery (freecad files included)
I needed a powersupply to repair things on the go. The powersupply snaps on a 18/20V Black&Decker battery. I added: A power switch to turn off A XT60 Jack - to connect a D60 soldering iron or to charge something else What do you need: 2…
- Downloads
- 175
- Likes
- 45
- Rating
- 0
P
PrintablesLiam.Kennedy
Side Skirt Clips for is200 is300 Altezza Etc
Replica of the elusive OEM side skirt mounts. Based on some old forum posts and some trial and error. I recommend printing them in Nylon, you might get away with using PETG but wouldn't recommend ABS/ASA due to their brittleness. PLA is…
- Downloads
- 173
- Likes
- 12
- Rating
- 0
P
Printablestanmaychhatbar
Low-Poly Lexus IS300
Inspired by Turtleman's collection of Low-Poly vehicles. It uses the same wheel as his models (atleast his Porsche 911)
- Downloads
- 167
- Likes
- 26
- Rating
- 5
P
Printableszeroflow
DPS3005 Power Supply Case
Remodelled in Fusion360 to make a few slight changes Add XT30 connector Change switch to a model I had at hand Add bottom intake vents to allow for natural convection Uploaded f3d source file for customization of input jacks
- Downloads
- 163
- Likes
- 38
- Rating
- 0
P
Printablesandy
Mini Lab Bench Power Supply (DPS3003/DPS3005) Powered by Einhell Batteries (remix)
For a full description and build instructions, please see the original model Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source . This remix is intended for stand-alone battery operation without the option for…
- Downloads
- 162
- Likes
- 41
- Rating
- 5
P
PrintablesKamilCadDesign
Lexus IS200 IS300 Cupholder
Lexus IS200 IS300 Cupholder. Fits in the original glove compartment, no gluing required
- Downloads
- 159
- Likes
- 10
- Rating
- 0
P
Printableshandro
Kasa HS300 Power Strip Vertical Rack Mount bracket
Rack Mount L Brackets for Kasa HS300 power strip using existing end caps from this model: Kasa HS300 Power Strip Mount by Pantherclawz Best to use my remix here as there are some fitment issues on newer HS300 power strips around the…
- Downloads
- 148
- Likes
- 23
- Rating
- 4.5
P
PrintablesEric T
Depstech DS300 Endoscope Cable Holder
This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…
- Downloads
- 144
- Likes
- 18
- Rating
- 5
P
PrintablestbkMAKER
Sony AS300/FDR-X3000 Cable Saver Case
*(Update: Made lens mount UNIVERSAL, now fits most 52mm lens. 5/12/25 * *(Updated clearance 10/27/24) * The legendary @theRealShooKon3 reached out to me with a problem that needed a solution. His IRL streaming camera kept breaking due to…
- Downloads
- 124
- Likes
- 8
- Rating
- 0
P
PrintablesNuggetron
Mini ITX PC Case Feet KXRORS S300 S400
Designed some taller case feet for Mini ITX cases, specifically the KXORS S300 and S400 to help with bottom air intake. Original feet are 10mm tall, so I created 20mm and 30mm variants. The 20mm variant height is approximate. The hole…
- Downloads
- 117
- Likes
- 12
- Rating
- 0
P
PrintablesHL
Kasa HS300 Power Strip Mount
This remix fixes the End piece so screws are more accessible, see original model for Front piece and print instructions.
- Downloads
- 116
- Likes
- 14
- Rating
- 5
P
PrintablesDex
Milwaukee Power Supply DPS3005
I've created a power supply that's designed to be powered by Milwaukee batteries. This setup allows for a versatile and portable power solution, utilizing the robust and readily available Milwaukee battery system. The power supply…
- Downloads
- 115
- Likes
- 43
- Rating
- 5
P
PrintablesPaul Arden
Mini Power Supply (DPS3003 and Laptop Supply)
Case to house a Rui Deng DPS3003 and a Sony Vaio laptop power supply (model 101310-11) which I happened to have on hand. I wanted something without any mains internal wiring. The laptop power brick puts out 19.5V up to 2A so perfect for…
- Downloads
- 111
- Likes
- 25
- Rating
- 0
P
PrintablesBuffedelic
Prusa silver PSU DPS3005 mod
This case is a remix to accomodate the silver psu from prusa i3 mk3. Hole for 40mm 24v fan, original powerjack and on/off switch. Unsolder the powerpanic board.
- Downloads
- 109
- Likes
- 7
- Rating
- 0
P
PrintablesEsmarra
S300 Mini-ITX Case Mod: Vertical Stand
I wanted a way to have my S300 case in a vertical position, but did not want the cables hanging from the top, so I've designed this model to do just that. You might need a PSU cable with 90deg. If the 90deg is facing the wrong way simply…
- Downloads
- 108
- Likes
- 10
- Rating
- 0
P
PrintablesPhilippe Lavier Guitars
EVOLUTION - RAGE 3-S300 (210mm)
Remix of the 255mm version for the 210mm and complete by the other necessary junctions. Use a 32mm suction pipe for the internal diameter and 41mm for the external.
- Downloads
- 99
- Likes
- 20
- Rating
- 4
P
PrintablesNitek
DPS3005 / DPS5005 USB-C Adjustable Power Supply Case
I modified to PSU Case to fit a cheap USB-C power delivery decoy module like https://www.aliexpress.com/item/4001253821461.html with a DPS3005 and it's USB-Controll-Module (e.g. https://s.click.aliexpress.com/e/_AmyMWd ). Build is…
- Downloads
- 95
- Likes
- 18
- Rating
- 5
P
Printablespcfronin
Antenna Recreation for Toyota IS200 IS300 Altezza Gita Sportcross
If you have found this model I guess like me you have broken your antenna while washing the car, moving a cover or just looking at it the wrong way. So I got replacement then modeled it the best I could to match to the original toyota…
- Downloads
- 91
- Likes
- 8
- Rating
- 0
P
PrintablesJDIacobbo
Kasa HS300 Power Strip Vertical Rack Mount With Standard Server Rack Holes
Remixed the Kasa HS300 Vertical Rack Mount to fit standard server cage nuts.
- Downloads
- 89
- Likes
- 7
- Rating
- 0
P
PrintablesCary
Work Sharp WS3000 sharpening platform
Hardware needed: (2) ¼"-20 X5/8" machine screws (2) ¼" washers (2) ¼"-20 square nuts (4) 4mm x 18mm bolts with nuts (4) 4mm knurled threaded insert nuts There are 3 files so far. One does not have a lip and allows you to adjust the…
- Downloads
- 88
- Likes
- 6
- Rating
- 5
P
PrintablesEric T
Depstech DS300 Case
This case is specifically designed to fit the Depstech DS300 Endoscope Cable Holder designed by me. https://www.printables.com/model/674345-depstech-ds300-endoscope-cable-holder Using the design from Whity's Rugged Box model. You will…
- Downloads
- 80
- Likes
- 10
- Rating
- 5
P
Printablesmkrpat
Bahco CS300 Kombinationswinkel Halter / Combination Square mount
Just for holding the combination square on my wall of tools.
- Downloads
- 80
- Likes
- 16
- Rating
- 0
P
PrintablesFilesearcher
Power Record DS300 to Festool Vaccuum adapter
Support: no Layer-height: 0.2 Infill: 15% Material: PLA
- Downloads
- 77
- Likes
- 10
- Rating
- 5
P
Printableswalldodge
Supermicro S3008L HBA Fan Mount
Adapter designed for 48x40x11 radiator. No additional hardware needed. Print Settings: Supports: No Resolution: 0.2 Infill: 100% Filament: PETG for "AOC_S3008L_cooling.stl" ABS for "AOC_S3008L_clips.stl" Assembly: Clips need to be glued…
- Downloads
- 76
- Likes
- 11
- Rating
- 0
P
PrintablesMartinB
DPS3005, DPS5005 or RK6006 Power Supply case with fan
Modified 3D model that allows adding a fan for better cooling. Due to the use of the power module RK6006 with bluetooth, the possibility to add a USB module for communication was removed, which in turn made it possible to add a 3006 Axial…
- Downloads
- 76
- Likes
- 13
- Rating
- 0
P
Printablesatok
Case for RD DPS3005 with USB-C
I sell an improved version of this project as a kit: https://www.tindie.com/products/tokarski_dev/usb-c-bench-power-supply-kit/ (it has no pigtail usb-c cable, just a normal socket). More about the design process:…
- Downloads
- 74
- Likes
- 16
- Rating
- 5
P
PrintablesZanthrax
Siemens EQ9 S300 coffee machine - brewing unit key
Sometimes the brewing unit will get jammed. This keys makes it a lot easier to open the brewing group to rinse it on the inside.
- Downloads
- 73
- Likes
- 6
- Rating
- 5
P
PrintablesOutchris
WORX Landroid Vision Cloud S300-Displaycover
easy to print and should serve as protection for the display from sun and rain! should also fit the larger lawn mowers.
- Downloads
- 66
- Likes
- 8
- Rating
- 5
P
PrintablesiScuzzy
NetAlly LinkSprinter LS300 hard case
A hard case for the NetAlly LinkSprinter LS300 Pocket Network Tester. I bought mine used so it didn't come with the soft protective cover. I hope to improve on the original soft cover by including a space to store the two AA batteries…
- Downloads
- 64
- Likes
- 5
- Rating
- 5
P
PrintablesDuckferd
S300 Mini-ITX Case Mod: Horizontal to Vertical Stand
This is a mod for the S300 mini-ITX computer case. This mod eliminates the tall bottom feet and top handle, and replaces them with a front frame and lower profile rear feet. This allows you to use the case both in its default horizontal…
- Downloads
- 60
- Likes
- 14
- Rating
- 0
P
PrintablesCatSailer1279
DPS3005 / DPS5005 Bench Case
Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…
- Downloads
- 58
- Likes
- 7
- Rating
- 0
P
Printablesrnorris
Kasa HS300 Power Strip Vertical Rack Mount bracket - Fixed Cord Bracket
Follow the original build instructions: https://www.printables.com/model/532147-kasa-hs300-power-strip-vertical-rack-mount-bracket
- Downloads
- 54
- Likes
- 7
- Rating
- 3
P
PrintablesToFe
Fun science: Modular lab power supply with DPS3005
Simple but powerful modular laboratory power supply from one DPS3005 modules and variable DC power sources (laptop power adapter, li-po battery, ... 36V industrial LED power sources). The main idea is that pupils can build a simple power…
- Downloads
- 52
- Likes
- 19
- Rating
- 0
P
PrintablesKing
Ryobi Orbital Sander ROS300 Vacuum Adapter for Ozito 1250W 12L Stainless Wet And Dry Vacuum
Vacuum adapter that fits Ryobi Orbital Sander ROS300 output to Ozito 1250W 12L Stainless Wet And Dry Vacuum
- Downloads
- 48
- Likes
- 4
- Rating
- 0
P
Printablesbishoprob528
Lexus IS300 / Sportcross gas cap retainer
Print in TPU only. Useful if your OEM plastic connector has broken. *v2 added - fixed the push tab to print better, straightened the connector so it doesn't bunch up one way, and thinned it slightly to better rotate on the cap.
- Downloads
- 40
- Likes
- 8
- Rating
- 0
P
PrintablesDon Pinpon
lexus is200 is300 outline
An outline of the iconic XE10 series (Toyota Altezza AS200-AS300, Lexus IS200-IS300).
- Downloads
- 39
- Likes
- 1
- Rating
- 0
P
PrintablesAquaMorph
Jaspers Kasa Smart Plug Power Strip HS300 Mount
This is a mounting devices to hold a Kasa HS300 smartplug to a Jaspers stand. Part List Part Quantity Link Nylon M6 Nut 2 Amazon M6 40mm Pan Head Screw 2 Amazon Print Instructions All Parts Infill: 30% Supports: Tree Rafts: None Filament…
- Downloads
- 37
- Likes
- 6
- Rating
- 0
P
PrintablesArtur Kulawczyk
Lenco-LS300 Hinge
I want to present a hinge designed as orginal part. The original hinge becomes deformed over time, so it must be replaced. Orginal part for that model are unavaible. I printed it in PET-G and ASA - I see no differences in short tests, i…
- Downloads
- 33
- Likes
- 3
- Rating
- 5
P
Printableskweg
YALPS - Yet another lab power supply based on DPS3005 and ender 3 24V original power supply
So I didn't want to go ATX they are just 12V and since I've replaced my ender supply for MeanWell I've decided to put the old supply to good use. It's designed to print on face with no supports. There are legs at the bottom to make it…
- Downloads
- 33
- Likes
- 6
- Rating
- 0
P
PrintablesYi Yu
A Snug Case for DPS3005/DPS5005 with Connectors and 5521 DC Jack
Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesPetr Stehlík
Case for DPS3005 power supply
Case for the DPS3005 programmable power supply. Created in OnShape.com - here's the source: https://cad.onshape.com/documents/a387dafa34ddb2b0b1734add/w/661b6e36556eeb673311f490/e/dcde09774cb5d0aa43c715d4 And here's the whole story:…
- Downloads
- 32
- Likes
- 2
- Rating
- 0
P
PrintablesAlexander
Case for DPS3003 power supply module
Case for power supply modules like DPS3003 DP20V2A 30V5A 50V5A DC32V/3A. Minimal design without screws ;) Print Settings Printer: CR-10S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: 3D Printing
- Downloads
- 32
- Likes
- 6
- Rating
- 0
P
PrintablesOtann
Godox MS300 protective cap
Just a simple protective cap for the light bulb. It has an opening, so it does not offer full protection, but it prints nicely without any supports
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
PrintablesLex
S300 bottle holder + 3 shots
Bottle and 3 shotglasses holder glasses size up to d-70mm You need 8 ball magnets d-5mm for shotglass and tubus cover and 8 ball or cylindrical magnet size d-5mm and lenght - 5 mm for tubus cover and hull shotglass "|holder"
- Downloads
- 29
- Likes
- 4
- Rating
- 0
P
PrintablesPascal
DPS3003 USB-C Case with Banana Plugs
Case for the DPS3003 and USB-C PCB from China Category: Electronics
- Downloads
- 27
- Likes
- 5
- Rating
- 0
P
PrintablesMichał Taraszka
Lexus IS300 - WaveShare 7HP-CAPQLED bracket
Requires trimming screen mounting points to fit the screen
- Downloads
- 26
- Likes
- 4
- Rating
- 0
P
PrintablesFabi09
Edifier S3000 Pro Remote holder
Attach it with double sided tape and you are fine. :) I printed it with 10% grid infill and 0.28mm layer height.
- Downloads
- 26
- Likes
- 5
- Rating
- 0
P
Printableslmn_
Server Rack Power Strip Adapter (KASA HS300)
Simple server rack mount for the KASA HS300. The one shown is printed in Siraya Tech ABS-GF, which is absolutely not needed. Depending on server temps please consider something other than PLA.
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
PrintablesAvi
Shiny Snake / KXRORS S300 Handle Replacement Mod
2 Version is available - No Heat Insert & Heat Insert Required. Heat Insert Version requires M4*H 8mm*OD 6mm Heat Insert
- Downloads
- 23
- Likes
- 3
- Rating
- 0
P
PrintablesGeorge?
LEXUS-ES300/330 CUPHOLDER-FIX
Custom-designed replacement cupholder for the Lexus ES300 (2001–2003) and ES330 (2004–2006). This part is designed to fix the common issue of the factory cupholder cracking, sagging, or failing to hold drinks securely.…
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesMarsell Walis
Worx Landroid S300 Cutting Disc (WRI30E)
Replacement cutting disc, the old one was damaged. The knives are mounted on rivet nuts placed in a 6mm diameter hole.
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesMichael Schmidt
osVAC Neo M32 Adapter for Record Power DS300 Disc Sander
osVAC Neo M32 Adapter for Record Power DS300 Disc Sander Upgrade your workshop’s dust management with this precision-fit osVAC Neo M32 adapter. Specifically engineered for the Record Power DS300 12" Disc Sander , this connector bridges…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesKamilCadDesign
Lexus IS200/IS300 Fuel filler cap pin
Replacement pin for Lexus IS200/IS300 Fuel filler cap Category: Other
- Downloads
- 20
- Likes
- 9
- Rating
- 0
P
Printablesreinerv333
Absaugung für Record Power BS300 Bandsäge
Für meine Bandsäge Record Power BS300 eine verbesserung der Absaugleistung. Die Absaugung ist nicht optimal gewesen und so habe ich einen Einhausung um die untere Rolle der Bandsäge konstruiert die den Schmutz auffängt und dann zentral an…
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
Printablesreinerv333
Maschinenschutz Record Power DS300
Für meinen Tellerschleifer einen Ersatzschutz um den zerbrochenen Maschinenschutz zu ersetzen! Ich habe PETG genommen mit 50% Füllung damit es stabil genug ist , den Pfeil habe ich mit Lackstift ausgemalt!
- Downloads
- 19
- Likes
- 3
- Rating
- 5
P
Printablesbladel
DPS3003/5 Single Case
Remix for 130x95x40mm power supply. (24V 5A) Category: DIY
- Downloads
- 19
- Likes
- 3
- Rating
- 5
P
PrintablesMaxim Shchetynin
Oscilloscope holder for «OWON XDS3000» or «Voltcraft DSO-6000»
Holder for oscilloscope of one of the following model series: Voltcraft DSO-6000 Series OWON XDS3000 Series
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
Printablesjuha_j
Tower Pro SG92R adapter for S3003 slot
Hi, This adapter to fit Tower Pro SG92R servo on Futaba S3003 slot. SG92R's hole on adapter is tight, so use file or sharp knife for snug fit. SG92R will be at exact position of S3003 when using same mounting holes, so no need to modify…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesMarAlMe
WdtPro S3000 Diffuser
English: Diffuser cap for the WdtPro S3000 flashlight. Printed in transparent Filament PM PETG. Deutsch: Streulichtkappe für die WdtPro S3000 Taschenlampe. In transparentem Filament PM PETG gedruckt.
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesOutchris
WORX Landroid Vision Cloud S300-Displaycover_update
Hello, I have slightly revised the first model. The extension can be easily attached, and the printing is also easy. The STL file must be separated into parts and objects, or you use seit 3mf file
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
Printablesaaron barragan
2006 LEXUS GS300/350/450H e.t.c. CENTER DASH VENT A/C FRONT OEM BRACKET
2006 TO 2011 LEXUS GS300 GS350 GS450H GS460 CENTER DASH VENT A/C FRONT OEM BRACKET, I broke mine so I made a replacement and I think it might be useful to someone else since you can only buy it complete and it's not necessary, Once…
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
Printablesexi
Festool Cleantec Adapter für Stichsäge PS300
Raft, Organic Supports, PETG
- Downloads
- 15
- Likes
- 4
- Rating
- 0
P
PrintablesMatcomaker77
TurboLamik Rotary witch mount for GS300/Toyota Aristo JZS161
Turbo lamik rotary switch mount for lexs gs300/toyota aristo. Should fit in place of the transmission ECT switch or VSC switch
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesIceman 7
Roseland RS300 Speakerholder
Remix eines Entwurfes zum Kleben oder an die Wand schrauben! Ich hoffe er gefällt euch! Lasst mir ein Like da!!!
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesSiS
Front panel to mount DPS3005 module in case for RD6018/RD6024
I had to mount some DPS3005 ‘Digital Power Supply’ modules (available on Aliexpress) and a reliable Mean Well HRP-200 power supply in a proper case. Most cases for modules in this format do not provide enough space to include the power…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesRaymondKelly
Shaver Holder Philips NT316010_Series3000
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesSANAIR
Stackable tableconsole for DPS3005 (DPS30xx)
This DPS30xx encoslure ist mountable to a desk or shelve and can be stacked on top on each other. I have utilized an Ender3 Stock PSU as an external power supply for tje DPS3005. I have printed PLA, rather fast with 0.6 nozzle; 0.18…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesFozzey
HS300 Power Strip Pole Mount
I printed in PC-CF 5 walls, 4 bottom, 5 top. holds pole extremely tight
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesTechNick
TSUN-MS300 Wallmount
Model for wallmounting the TSUN-MS300 microinverter.
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesTDM465
FRC MS3000 camera mount
A remix of FRC3038's camera mount for better camera fit/hold and more istall options. This is a WIP (ver 2); Version 3 may have print-in nuts for the tilt axis to elliminate the need for the 3.5"+ tilt bolt
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesThtunew
Kasa HS300 Smart Power Strip Magnetic Mounting Bracket
Kasa HS300 Smart Outlet Magnetic Mounting Bracket for 1/2" X 1/4" magnets
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
Printablesreinerv333
Abstreifer RecordPowerBS300
Ein Abstreifer der an die unter dem antriebsrad der unteren Antriebsrolle platziert wird und die Antriebsrolle von Spänen abstreift.Es ist eine Versenkung an der Unterseite mit der man es mit Doppelseitigem Schaumstoffband ankleben kann!…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesKriegst_N_Keks
GST 18V-125B Adapterplate for PLS300
My Father asked me to design an Adapterplate to use his GST 18V-125B on the PLS300. Since i couldnt find anything from other designers, i designed it myself. There is just the normal Plate that is the same as the Original that comes with…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesSimon99de
Remix Housing / Case DPS3005 DPS5005
Deutsch: Remix von: https://www.thingiverse.com/thing:2951395 Ich habe es bearbeitet für Rechteckige Kippschalter: (19,2x12,4)…
- Downloads
- 7
- Likes
- 3
- Rating
- 0
P
PrintablesNebulus
Ankle for S3003 dual cover
Ankle for modified S3003 Servo, used for robot project. Second cover has been mounted on opposite side of S3003 i.o. to obtain dual guidance for more stability. Designed with with FreeCAD, source file included Category: Robotics
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesKuro Nakajima
RX9070 GPU Brace for S300 and Universal ITX Cases
A simple parameterized GPU brace designed to support the end of a graphics card and reduce movement during transport or daily use. I originally designed this for my S300 ITX build with a Gigabyte RX9070, but the model is parameterized, so…
- Downloads
- 7
- Likes
- 3
- Rating
- 0
P
PrintablesKuro Nakajima
TwinVortex Dual Fan Cooling Mod for S300
This is a custom dual 120 mm external fan bracket designed for the S300 ITX case. I created it to improve airflow and cooling performance in a very compact build where internal space is limited. The design mounts two fans externally and…
- Downloads
- 6
- Likes
- 3
- Rating
- 5
P
PrintablesAbbey-Lubber
AKG DMS300 Microphone Chassis Sleeve
Chassis Sleeve for an AKG DMS300 Microphone. (5094802-00) Sleeve has ring / indent on bottom that can be colored for mic identification. Print in your choice of materials - I printed it in ABS. Threads may require finer layer heights…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesDigital Jedi
Depstech DS300 outline
Shapescan outline of the Depstech DS300 camera. Extend the top to wherever you want to coil the camera cable.
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printablessteveprusa1502
CBE DS300 DS120 BC122 CB516 mounting bracket
Male dovetail mounting bracket for CBE line of campervan / motorhome electrical panels e.g. DS300 DS120 BC122 CB516. These panels can be clipped to each other but require screw mounting legs for the ends and middle.
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesUncle Iroh
RTX5080/5090 FE Fan duct for ShinySnake s300/s300pro
This is a fan duct for the rtx5080 or 5090 FE cards in a ShinySnake S300 or S300 pro case. I It could be redesigned to fit other cases, all you would really have to do is extend or shorten the ducts to match your case, its made to be used…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesSlimBoyFatt
S300 Wall Cradle - Shiny Snake ITX Case
I’ve designed a pair of wall cradles for the S300: the STL file to print, the adjustable design file, a preview image and a README with print and install notes. Layout: the PC stands upright with its long side along the wall, so it only…
- Downloads
- 0
- Likes
- 1
- Rating
- 0
P
Printables
CBE DS300 DS120 BC122 CB516 mounting bracket
Male dovetail mounting bracket for CBE line of campervan / motorhome electrical panels e.g. DS300 DS120 BC122 CB516. These panels can be clipped to each other but require screw mounting legs for the ends and middle.
P
Printables
AKG DMS300 Microphone Chassis Sleeve
Chassis Sleeve for an AKG DMS300 Microphone. (5094802-00) Sleeve has ring / indent on bottom that can be colored for mic identification. Print in your choice of materials - I printed it in ABS. Threads may require finer layer heights…
P
Printables
Dust collector record power BS300E BS350S
Dust collector for the record power band saw bs300e and bs350s. The dust collector sucks the chips where they originate, directly under the table. The efficiency is enormous. Without a dust collector, huge amounts of chips accumulate on…