71 models
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
My Schuberth C5 came with a Schuberth SC2 Sena compatible bluetooth kit mounting slot, but I already own a Cardo Edge bluetooth kit and I want it installed properly. As an engineer and owner of a 3D printer I did the most sensible thing…
I don't like attaching the microphone-speaker to the antenna of the radio when it's not in use. The antenna is for transmission and not for mounting things. That's why I designed a holder that rests on the two holes on the back of the…
SC2 Emergency Switch Enclosure. This is not to be used by anyone who can not reassemble the switch properly and safely. This replaces the stock enclosure that came with my SC2 Pro. It takes 4 x M6x16mm bolts to mount to the profile…
Command Center, Orbital Command and Planetary Fortress from Star Craft 2: Wings of Liberty. ===================================================== Disclaimer: This model is the intellectual property of Blizzard Entertainment, Inc.…
Hatchery, Lair and Hive meshs from Star Craft 2: Heart of the Swarm. All three are in the same STL. Disclaimer: This model is the intellectual property of Blizzard Entertainment, Inc. Reproduction for personal use is not explicitly…
Hydralisk mesh from Star Craft 2: Heart of the Swarm. Disclaimer: This model is the intellectual property of Blizzard Entertainment, Inc. Reproduction for personal use is not explicitly prohibited under the Blizzard the EULA but…
BOM: ~65g of filament - depending on infill (I recommend ABS & min. 15% Gyroid ) 2x M8x16 Sockethead or Buttonhead screw 2x T-Nut for 4040 profiles
These are a replacement door bins for LG LSC27925, LSC27937ST fridges, replacing LG part 241H / MAN61844401 / AAP72911202. I printed this on my Sovol SV06 and it took up nearly the entire 220mm x 220mm print bed, so I think you'll need a…
Nexus from Star Craft 2: Legacy of the Void. Disclaimer: This model is the intellectual property of Blizzard Entertainment, Inc. Reproduction for personal use is not explicitly prohibited under the Blizzard EULA but attempting to profit…
A tool holder for mounting on Sieg SC2. Should also fit other Chinese 7X lathe with the same chip guard. Included STEP file in case you want to modify it. I print these in ABS+ but any other filaments should work just fine.
Guide available here: Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a…
I refused to buy the Sena SC2 Intercom. I already bought a Sena 60S and want to use it with my new Schuberth E2. So I did the only sensibel thing and printed my own. It uses the exzellent Schuberth SC2 replacement Cover from guidosenff .
This is an export of the Schuberth SC2 cover part that I modeled and used in the Schuberth SC2 Sena mount to Cardo Edge converter. You can use it as alternative cover plate or to create your own mount adapters.
3D Part which allows us to place a Macro Lense into a Vevor SC240M Thermal camera. Should work with Infiray C200 and other cameras with same housing. This holder works with 20mm Lens, the only thing is needed is the lens, and two small…
Enhance your DJI Ronin SC2 setup with this precisely engineered STL adapter, crafted to seamlessly connect to the gimbal’s NATO mount. This versatile accessory is perfect for mounting an array of cold shoe-based gear, including compact…
I purchased a new, clear SC28 body from Team Associated to scan. The purpose is to design a new AE 28th scale chassis to look like it fits under the Short Course Truck body.
Uses standard M8x10mm screws as counterweights, I used the low profile variant that weighs in at around 7 grams each for a variable weight of 49 grams. The prints, two threaded M5 inserts, and two M5x25mm screws add another 31 grams for a…
I have printed it in PETG from 3dJake, at PIF-settings. Works fine.
Thanks to the inserts made by brsc2909 for the Aldi Workzone / Allit Basic 33 / Jaycar 33 parts drawer, I remixed it to have 2x 12 sections for small screws. Since everybody needs different box sizes, I added the Fusion 360 and STEP Files…
Fan mount for SC2 Sport or Pro bolt pattern and SimLab vertical Mount. This is for VR use only as it would certainly be in the way of screens. This mount uses the long 8mm bolts extending behind the SimLab Vertical Mount and has clearance…
Designed to replace caddy model 72CWN this is not for regular servers, only compellent disk shelves
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
unique and aggressive design, with a focus on aerodynamics and exclusivity.
The apron gear cover that came with my 7x16 HiTorque 5100 Mini Lathe from littlemachineshop.com was just a thin, flimsy cutout of blister/clamshell plastic sheet. I replaced it with this print, which is much stronger, blocks more chips,…
This is a cover that pressure fits over the 4 cap bolts of the SC2 Sport and Pro. The Ultimate has a different bolt pattern. It will take a rubber mallet to secure it over the cap bolts. I've removed the original STL file which had a…
This model is designed to be printed in a FLEXIBLE FILAMENT such as TPU or other TPE. It WILL NOT WORK if printed in a rigid filament such as PLA or ABS. The loop can be stretched around the flashlight to settle in the slot for the clip.…
More traction and more squish. Make sure to chase the shaft insertion hole with a 2mm drill bit.
Been wanting a better poseable worklight. Found out that the Sofirn SC21 can run while plugged into power, so I printed a mount that snaps onto Loc Line (½" ID Loc Line) and holds the light. It has a gap for the pocket clip and the rubber…
PLA / PETG / TPU -> transparent Works all fine, no support needed Update: Ich habe die Decke oben nochmal bearbeitet. Sie ist jetzt oben etwas Dicker. Der Druck hat sehr gut funktioniert mit TPU Transparent. Und sry ich hatte einen Fehler…
I designed a box with a lid to mount the 1+1 desktop charger from Sepura. I printed in: PLA, 0.3mm, 2 walls, 15% infill Check my other sepura stuff: https://www.printables.com/model/1143572-sepura-holder-srsm-sc20
You can buy these from me here! This Skilhunt HB3 headband works great with the mount. This rotating 3D-printed mount allows you to easily attach your SC21 or SC21 Pro to any part of a 1" wide flashlight headband. Designed specifically…
I finally received my Steam controller and needed a Dock to present it on my desk :). No supports necessary! I printed it in PLA on my Centauri carbon at 0.2mm layer height and 20% gyroid on the bottom part and 5% on the upper part to…
These bands can be slid over the tires on Associated SC28 to add even more fun to an already righteous rc truck. Printed in TPU at 0.3mm layer, they're just thick enough for two perimeters with 0.4mm nozzle. Could be scaled for bigger…
This stand works with both the Pro and the Sport versions. Needed: 1x Diode Dynamics SSC2 LED Light 1x M5x50mm cap head bolt 1x Nyloc M5 nut
Kicker includes a bracket for Subaru with these speakers but it didn't fit my 2018 Legacy. This should fit other Subarus around the same year. I designed this as a 2-piece solution so there's no extra hardware needed and the speaker sits…
Gedruckt mi Prusa Mk3 mit 0,6mm Düse, 100% Infill, Stützen and PETG. Printed on a Prusa Mk3 with a 0.6mm nozzle, 100% infill, supports and PETG.
Use your APS-C Sony E-mount body to capture the largest square format images most full-frame lenses are almost certain to cover -- as shown in the last three images above. This is a simple four-part adapter for Leica M to Sony E -- except…
Bracket to allow a SSC2/SSC1 combo to be used on ditch light. The model is made for the 2021 F150 Diode Dynamics ditch light bracket a flat bottom (No lip) is included for other application. Would recommend printing out of PETG or…
My first ever posted model! The build comes in three parts: White- Visor Blue- body and nozzle of the gun Black- the gun Designed for use with glue I forgot how much time it takes to print though. The whole thing should be around 2.5 hours.
This is a remix of @RCHeliguy SC2 Enclosure. RC's had the switch face on but I wanted it to sit on the side of the profile so it needed to be mounted at a 90 degree angle and needed a back - This needs to be undertaken by someone who is…
UPDATE I added a version 2 that's actually the exactly the same just +.1mm longer for (hopefuly) a tighter press fit although I have no tested it yet, so let me know. I also put a slight fillet on the edges I made a tool organizer that…
3D-Scan of the SC2 properly oriented to valve's CAD-file. also shows the inside of the controller.
After tracking down a really nice windblocker for my NB miata that included speakers, I decided taht the stock speakers suck and I want upgrades. So I went off researching if it were possible to replace the speakers in the windblocker…
Fan mount/cover with shroud for SC2 Sport or Pro bolt pattern and SimLab vertical Mount. This is for VR use only as it would certainly be in the way of screens. This mount uses the long 8mm bolts extending behind the SimLab Vertical Mount…
As described, this is a remix that I needed to make the inner noses and brackets more stable. As the wider parts of the cutouts are on the opposite sides, they might theoretically hold without glue, but decide for yourself if you want to…
I couldn't find any suitable box for the microswitch so I made one by my self. The enclosure has been specifically designed for the Aeotec Micro Switch G2 DSC26103. No supports are necessary. I printed it in PLA. Two little screws are…
This duct allows a 1080 Ti SC2 to draw fresh air into a Fractal Ridge. No case fans, no recirculation, no excess noise or heat. Install to case with M3 buttonhead screws and heatset inserts.
PLA, Layer 0.2mm, Infill: 15%
Modelled for strength to allow the bracket to take weight while being mounted from the bottom of the wheel. F3d file included if you want to remix for a different profile - fair warning though that I am new to Fusion so the model is a bit…
just the spare for the steering part of the radio
The STEP is a multibody, use the split to objects tool. This model is three separate parts, hardware required to assemble: 2x M3x40 SHCS 6x M5x12 SHCS 1x M3 Hexnut 1x M3x12 SHCS refer to images for assembly info and print orientation
I refused to buy the Sena SC2 Intercom. I already bought a Sena 60S and want to use it with my new Schuberth E2. So I did the only sensibel thing and printed my own. It uses the exzellent Schuberth SC2 replacement Cover from guidosenff .
Adapter plate to mount the SC28 body on the Losi Micro-T. The top plate is just decorative, feel free to ditch it. Holes need to be redrilled to screw size. 1mm if reusing original micro-T screws.
Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a size of mini-z and the…
unique and aggressive design, with a focus on aerodynamics and exclusivity.
Guide available here: Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a…
The apron gear cover that came with my 7x16 HiTorque 5100 Mini Lathe from littlemachineshop.com was just a thin, flimsy cutout of blister/clamshell plastic sheet. I replaced it with this print, which is much stronger, blocks more chips,…
just the spare for the steering part of the radio
This duct allows a 1080 Ti SC2 to draw fresh air into a Fractal Ridge. No case fans, no recirculation, no excess noise or heat. Install to case with M3 buttonhead screws and heatset inserts.
You can buy these from me here! This Skilhunt HB3 headband works great with the mount. This rotating 3D-printed mount allows you to easily attach your SC21 or SC21 Pro to any part of a 1" wide flashlight headband. Designed specifically…
These are a replacement door bins for LG LSC27925, LSC27937ST fridges, replacing LG part 241H / MAN61844401 / AAP72911202. I printed this on my Sovol SV06 and it took up nearly the entire 220mm x 220mm print bed, so I think you'll need a…
I have printed it in PETG from 3dJake, at PIF-settings. Works fine.
Adapter plate to mount the SC28 body on the Losi Micro-T. The top plate is just decorative, feel free to ditch it. Holes need to be redrilled to screw size. 1mm if reusing original micro-T screws.
Hi there, I know the title is a bit of a lie, because mini-Z is 1/28 not 1/24, but it is close. And it is a rally chassis not throphy truck chassis. But the original idea was to make the short course truck with a size of mini-z and the…
these tires are designed for the team associated sc28 trucks with the terrible foam tires. they are made to work on carpet tracks or similar. they do not work on hardwood floors due to the suggested tpu filament choice. for now, you cant…
Flashlight holder for Sofirn SC21. Great for a night light. Use a brim for adhesion or the hook might warp outwards a bit. The one in the picture was printed in PLA, 0.12mm resolution.
After installing drift bands on my sons sc28, it spent more time upside down and was scuffing up the roof on his new truck. So he asked for roof sliders. These are a quick print and easily secured with shoe goo. Printed at 0.15mm later 4…
I contacted the Maker of the Model STP9000 and asked to edit it for SC2020. Thanks for your permission chilluniverse@chilluniverse ! Remix for Holder Sepura SC2020 with Speaker. Happy printing! #STP9000 #STP9038 #SC2020
I contacted the Maker of the Model STP9000 and asked to edit it for SC21. I removerd the extension hook. It is printable without support. Thanks for your permission chilluniverse@chilluniverse ! Remix for Holder Sepura SC2020 with…
