P
PrintablesBudwin
Batman Flashpoint Inspired Mask
Batman Flashpoint Inspired Mask Enjoy Category: 3D Printing
- Downloads
- 7,451
- Likes
- 1,091
- Rating
- 5
Search results: shp
Counting matching models…
P
PrintablesPunsiPuny
Faketec V4 case Meshtastic MeshPhone with GPS and Oled
Updates Added a new front part version that fits the (NEW) 0.96" OLED , since the old version was designed for the original OLED size. Thank you @JLO_2137313 for the feedback! Added a version that fits 18650 batteries . It’s a bit…
- Downloads
- 328
- Likes
- 50
- Rating
- 5
P
PrintablesAlley Cat
MeshPack Seeed L1 OLED
Commercial Use and Attribution Notice MeshPack © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under…
- Downloads
- 305
- Likes
- 75
- Rating
- 5
P
Printablesanchorman.nz
Insta 360 Pole Holder for the SeaDoo Fishpro
This holder supports the Insta360 Invisible Selfie Stick and can clip onto the Linq System of the SeaDoo FishPro Explore.. Print solid fill With a least PetG or better. Supports have been modeled so you wont need to add your own. PLEASE…
- Downloads
- 302
- Likes
- 16
- Rating
- 0
P
Printablesanchorman.nz
SeaDoo ST3 Fishpro Second Battery Mount
This holder has been designed to be glued into the hull of the fishpro. (The photos here are of a larger Lithium battery on my first version of the battery holder.) I have designed the holder to have a large surface area touching the hull…
- Downloads
- 288
- Likes
- 18
- Rating
- 5
P
PrintablesSemperDiscere
Helicopter Swashplate
Helicopter swash plate based off of a GE5C bearing. BOM GE5C Bearing x 1 15x32x9 ball bearing (B6002RS) 3mm ball studs x 7 (use tap on the holes) known issues: No FEA Release Notes v5 - Fillet/Chamfer lower portion of top plate for main…
- Downloads
- 282
- Likes
- 24
- Rating
- 0
P
PrintablesCuriousTech
OpenSCAD Parametric Pushpins
Parameters are diam (diameter), cones 0 or 1 (ball or teeth), cone_cnt. Length is automatic. To create just outer or inner, comment out one of the last 2 lines (push and pin). No supports needed.
- Downloads
- 282
- Likes
- 122
- Rating
- 0
P
PrintablesMici
DUMMY 13 goes to COMIC CON - Fetishpool/Kidpool/Diaperpool? V1.0
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 DUMMY 13 loves COMIC CON! So I have started to design a whole series of characters and costumes for DUMMY 13. This is…
- Downloads
- 220
- Likes
- 70
- Rating
- 0
P
PrintablesRayfor
OSHPF Opensource High Precision Focusing Ring for M65 17-31
for use with M65 17-31mm focusing tube, see https://www.printables.com/model/1400453-linhof-617s-iii-lens-super-angulon-72mm-xl as an example I generate common schneider lenses, since their EFL are easy to find. I also provide a hpf…
- Downloads
- 204
- Likes
- 15
- Rating
- 0
P
Printables101
5 SECOND INSTALL PUSHPINS for: " Creality K1 - Improved side fan silencer and protector" by JEng
push into the fan, then push the fan into place. one and done. face down, no supports, small layers preffered. 10 min avg print time for 3
- Downloads
- 196
- Likes
- 21
- Rating
- 5
P
Printablespancake
Pushpin/Thumbtack shelf
This is a shelf I made to fit thumbtacks with a base of 9mm and a length of 22mm from the end of the base to the tip. I printed with 10% infill and mostly base cura settings and holds really well. The first model, I have made
- Downloads
- 184
- Likes
- 8
- Rating
- 0
P
PrintablesAlley Cat
MeshPack Pro Wio Tracker L1
Commercial Use and Attribution Notice MeshPack Pro © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted…
- Downloads
- 175
- Likes
- 39
- Rating
- 5
P
Printablescalipsoii
LumenPNP ReferencePushPull Feeder Modifications
This is a collection of 3D-printable parts that can be added to a LumenPNP v3 pick-and-place machine to allow the use of Mark Maker's (makrzone) ReferencePushPullFeeder feeder. I've had very good success with these feeders and I really…
- Downloads
- 174
- Likes
- 11
- Rating
- 0
P
PrintablesExitaph
FLASHPOINT RF-400/GODOX AR400 90 DEGREE MAGNETIC POLARIZING FILM MOUNT
This is a snap-on magnetic mount for attaching polarizing film to Flashpoint RF-400/Godox AR400 for photogrammetry purposes. It uses 4 magnets 90 degrees apart so that you can easily alternate between polarized and nonpolarized in order…
- Downloads
- 170
- Likes
- 11
- Rating
- 0
P
Printablesstuckpixel
Philips SHP9500 Headphone Head Cushion Clip
My SHP-5000 headset fell and the clip that holds the top cushion on broke. Designed this in tinkercad, and seems to work well.
- Downloads
- 160
- Likes
- 11
- Rating
- 5
P
PrintablesVelex
Godox and Flashpoint eVOLV Twin Head with Bowens Mount (AD-B2) cover
Print, like and share!! Bowens Mount cover, Flashpoint eVOLV Twin Head (AD-B2) and GODOX SL-100W
- Downloads
- 160
- Likes
- 14
- Rating
- 5
P
PrintablesJustinBridou
Modérateur de son/Sound moderator for Hatsan Flashpup-S 1/2 20 UNF (4.5mm or .177) Impression rapide et économique
Attention, nouveau modèle ! Après 200 tirs avec l'ancien, l'avant du modérateur a cédé sous la pression. Attention new model ! After 200 shots with the old, the front of the moderator has given in under pressure.Attention new model! After…
- Downloads
- 156
- Likes
- 16
- Rating
- 0
P
PrintablesDave2411
Halo Flashpoint: Player Boards
I Didn't like how messy the tokens looked just placed on top of the model cards so I made theses so they can be placed neatly around the card. Went through a bunch of iterations and decided to upload a bunch of them. I don't pictures for…
- Downloads
- 154
- Likes
- 18
- Rating
- 0
P
PrintablesAllister
OMP M4 Swashplate Leveler
Not much to say if you know what it is. I checked for flat against some glass and it seemed good. I printed in PLA, and used some supports for the center.
- Downloads
- 130
- Likes
- 3
- Rating
- 0
P
PrintablesDGA
Philips SHP2500 headphones repair kit
Repair kit for Philips SHP2500 headphones. To print all parts need to add in slicer mirrored part ( full kit in g-code file) Material: PET-G -recomended Layer high: 0,2 or lower Supports needed under the cylidrical parts ( support added…
- Downloads
- 125
- Likes
- 18
- Rating
- 5
P
Printableskpb44cth
Swashplate Leveller and Zero pitch Tool for OMP M1
I designed these to help me level the swashplate of my OMP M1 helicopter. The zero pitch tool allows you to set the blade grips at 90 degree to the main shaft for setting zero pitch. The swash levelling tool helps copy that level to the…
- Downloads
- 121
- Likes
- 3
- Rating
- 0
P
PrintablesJason H.
OMP M2 Evo Swashplate leveler
I wasn't too pleased with the stock swash leveling tool that came with the kit. So I designed this one to give it a better footprint instead of sitting on top of the locking collar I printed it out @ 10microns layer. It will require…
- Downloads
- 121
- Likes
- 7
- Rating
- 0
P
PrintablesRT3D
AmpliFi Alien MeshPoint Wall Mount
I recently purchased the AmpliFi Alien WiFi 6 WiFi System, this includes the standalone mesh point. I spent the weekend running ethernet in the attic to have an access point in the closet in the back of the house via an ethernet backbone.…
- Downloads
- 120
- Likes
- 7
- Rating
- 1
P
Printableschking
MultiBoard Pushpins
Pushpins are great for holding items on a MultiBoard. For instance, pushpins make attaching and moving MultiBoard Parametric Labels simple and easy. Pushpins come in two styles: Flat head pushpins are a little harder to get out but are…
- Downloads
- 114
- Likes
- 29
- Rating
- 0
P
PrintablesChilihead
Hatsan FlashPup .22 Single Shot Tray
I created this this after my Siberian Husky chewed up the single shot tray of my .22 FlashPup. It's a simple version of the stock tray, but works great on my air rifle. You may need to give it a couple swipes of sandpaper depending on…
- Downloads
- 112
- Likes
- 6
- Rating
- 0
P
Printablesmak77
Swashplate Leveler for XLPower Specter 700
3D printed swashplate leveler. Handy tool to setup proper geometry of RC helicopter main rotor head. This one will work with XLPower Specter 700, or any model helicopter with 15mm main shaft and similar swashplate diameter.
- Downloads
- 110
- Likes
- 4
- Rating
- 0
P
PrintablesJustinBridou
Modérateur de son/Sound moderator for Hatsan Flashpup-S 1/2 20 UNF (4.5mm or .177)
Modérateur de son/Sound moderator for Hatsan Flashpup-S ½ 20 UNF (4.5mm or .177) Fonctionne très bien, la ligne de raccord du nid d'abeille n'apparait pas après avoir généré le G-code. Je passe un coup de taraud M12 en pas de 1,25 pour…
- Downloads
- 109
- Likes
- 8
- Rating
- 0
P
Printablesanchorman.nz
SeaDoo Fishpro Lowrance FS9 and FS7 Sounder Heads Up mount.
SeaDoo Fishpro Lowrance FS9 and FS7 Sounder Centre mount Bracket..
- Downloads
- 106
- Likes
- 5
- Rating
- 0
P
PrintablesAgentvt01
Halo flashpoint spartan edition token organizer
An organizer for halo flashpoint tokens
- Downloads
- 102
- Likes
- 14
- Rating
- 0
P
PrintablesExotechd
KTM EXC Crashpad New Version
Print white 80 % infill Print Settings Rafts: No Supports: No Resolution: 200 Infill: 80-100 Filament: rendom ABS Category: Automotive
- Downloads
- 99
- Likes
- 4
- Rating
- 0
P
PrintablesTruckBC
90 Degree LED Strip Clip - Thumbtack or Pushpin mount
Wanted to mount LED strip behind my dressers to light up the wall. Designed for RGBW Waterproof LED Strip, made for thumbtacks with plastic heads. should work as is for most waterproof strips. 3mm between the two fingers, which are 11.5mm…
- Downloads
- 91
- Likes
- 14
- Rating
- 0
P
PrintablesRedNightPrinting
Magnetic Pushpin/Thumbtack
This is a simple design for a pushpin/thumbtack sized magnet. These are great for magnetic whiteboards, kitchen fridges, office areas, and more. You can buy the magnets on Amazon using the links below. There are 4 sizes so you can fit…
- Downloads
- 90
- Likes
- 8
- Rating
- 4.8
P
PrintablesAustin H.
Model Sword Wall Mount - Pushpin
I printed out an amazing Kingdom Come sword model and wanted to hang it on the wall in my office. Created a quick and easy piece to that I could use a few push pins to hold it up. Non printed parts: You will need 4 pushpins. The larger…
- Downloads
- 89
- Likes
- 10
- Rating
- 0
P
PrintablesMaking Changes
Giant Pushpin wall hook/hanger.
My wife wanted a place to hang scarves, sweaters, and headphones in our home office that looked like giant pushpins in the wall. This was designed and printed in two parts to hide the screw holes and provide a handy little stash box…
- Downloads
- 84
- Likes
- 21
- Rating
- 0
P
PrintablesCTuxRun
Pushpin/Thumbtack Magnet
I remixed this to give it strength, and an added benefit of allowing for support free printing. I printed it with 4 perimeters to help with the strength as well. I only altered the model that uses 6x3 magnets, since that is the magnet I…
- Downloads
- 82
- Likes
- 9
- Rating
- 0
P
PrintablesJHONYC
Tac/pushpin dart
This is a push pin/tac dart it requires a 4mm nut for nose weight and a tac and a little bit of glue you print it glue the 4mm nut to the bottom of the tac with a little hot glue or superglue and the put some glue in the darts hole and…
- Downloads
- 78
- Likes
- 24
- Rating
- 4.33
P
Printablesanchorman.nz
SeaDoo FishPro Rod Holder Base
I have just created a new product. This cap fits on the end of the FP rod holder preventing your fishing rod from dropping through the base of the holder and damaging your mats.. Easy install.. I have printed with TPU…
- Downloads
- 77
- Likes
- 11
- Rating
- 0
P
PrintablesDataK
Just giant pushpin
Just a giant pushpin. You can pin it into ground, wall or anything… It is projected to be printed as separate objects and screw them together. Easy mounting. Warning! Dont stab people! It makes stabbed people…
- Downloads
- 73
- Likes
- 12
- Rating
- 0
P
PrintablesMrToToRo
SAB goblin Kraken 700 SWASHPLATE LEVELER
I recommend printing from bright plastic!
- Downloads
- 73
- Likes
- 3
- Rating
- 0
P
PrintablesOuwekaas
Funkamateur MiniWhip antenna holder for fishpole
Funkamateur MiniWhip encloser to be used on a fishpole. Diameter hole for fishpole is 5.5mm Printable right up, supports are needed only for the lower parts, block te rest. I printed with PETG Desert storm matt from brand Spectrum. 0.2mm…
- Downloads
- 73
- Likes
- 3
- Rating
- 0
P
Printablesbenismaman
Philips SHP9500 Headband Clip for headphones
Replacement clip I made after mine broke. I printed on bambu P1S with PLA. Supports are built in. Be sure to snip off supports before using. Print on a 45 degree angle for long lasting strength. Hopefully this helps someone save a good…
- Downloads
- 70
- Likes
- 5
- Rating
- 5
P
PrintablesSwissArmyWrench
Bulletin Board Pushpin Dish
This pushpin dish is designed to attach to your bulletin board using four standard pushpins. Not much else to say - download and enjoy!
- Downloads
- 66
- Likes
- 13
- Rating
- 0
P
PrintablesLukas
Draco bushplane
Little tribute to the most crazy plane I have ever seen. Mike Patey built this incredible machine and unfortunatly crashed it last year. However he will build a better one again and I can not wait :)
- Downloads
- 66
- Likes
- 5
- Rating
- 5
P
PrintablesJHONYC
Blow dart from tac/pushpin
This is a powerful blowdart I designed all you need to make it is a tac filament a little hot glue and time to put together put a little bit of hot glue around the tac and put it in the hole in the 3D printed dart and shoot have fun…
- Downloads
- 66
- Likes
- 16
- Rating
- 5
P
PrintablesDave Richman
REMASTERED Halo Flashpoint Command Dice Holders
UPDATE 10/16/2026 -Added several new designs: -Covenant Icon -USNC (Noble Team Jorge Helmet) -UNSC (Noble Team Noble 6 Helmet) -UNSC (UNSC text logo) This brings the total designs to 12 designs !! I'm hoping to get the last 3 Noble Team…
- Downloads
- 65
- Likes
- 2
- Rating
- 0
P
Printablessara.l
Bowens mount for Flashpoint eVOLV Twin Head flash
A simple and durable Bowens mount cover to protect, in this case, the bulbs in a Flashpoint eVOLV Twin Head flash. This could be used in other Bowens mount compatible flashes as long as it clears the bulbs. Print Settings Printer Brand:…
- Downloads
- 65
- Likes
- 5
- Rating
- 0
P
PrintablesJanetS
Store Your Pushpins Where They're Needed
We recently moved and downsized dramatically so I am constantly thinking of using space more efficiently. We installed a bulletin board and I wanted the pushpins to be placed where they are used and thus easy to find. So I designed this…
- Downloads
- 63
- Likes
- 23
- Rating
- 5
P
PrintablesStudio Meshco
Corkboard/Corkwall shelf. Using regular pushpins.
Hi! i designed this small shelf to hang on our corkwall. It uses 3 pushpins to pin into the cork. The holes are designed for the pushpins to have a snug fit so you might want to turn them to get them in. The shelf prints whitout supports.
- Downloads
- 61
- Likes
- 12
- Rating
- 5
P
Printablesliquidmetal9015
Halo Flashpoint Magnet Adapter
Allows for attaching an ~10x1.75 magnet to the bottom of halo flashpoint miniatures by mantic games. Using a textured plate is probably advisable (I did not)
- Downloads
- 58
- Likes
- 14
- Rating
- 5
P
PrintablesꞰWoxel
SplashPump – Pool Water Gun
SplashPump – Pool Water Gun 💦 A simple pump action water gun designed for fun in the pool! Just fill it with water, pump the handle, and enjoy a splash battle with friends and family. The model is easy to print and assemble, the parts…
- Downloads
- 58
- Likes
- 37
- Rating
- 0
P
Printablesevren.builds
Action Splashproof Speaker (Roseland RS-2oo) Open-Source Redesign
The Action Splashproof Speaker (Roseland RS-2oo) was redesigned to be easier to repair & recycle. It uses the existing parts but the designed is going to be adapted down the line the work with standard off the shelf parts. The current…
- Downloads
- 56
- Likes
- 4
- Rating
- 0
P
PrintablesGromit21
Blitzwolf BW-SHP6 Programming Adapter
Disclaimer : Use at Your Own Risk ! Using and/or working with/on 110-230 voltages or device(s) can be deathly and/or cause fire. It is not worth the risk to yourself, your family and your home if you don't know exactly what you are doing.…
- Downloads
- 53
- Likes
- 4
- Rating
- 0
P
Printablesanchorman.nz
Seadoo Fishpro Garmin Backing Plate
Seadoo Fishpro Garmin Backing Plate for the terminals of the Garmin FishFinder..
- Downloads
- 53
- Likes
- 6
- Rating
- 0
P
Printablesanchorman.nz
SeaDoo FishPro gx750 black box vhf marine VHF radio Mount
Retrofit the GME Black box VHF Radio to the SeaDoo FishPro. Remove the plastic phone cover inside the glovebox then install the Handpiece mount.…
- Downloads
- 53
- Likes
- 8
- Rating
- 0
P
Printablesanchorman.nz
Seadoo FishPro Water Pickup
Hi All --- I have published a new 3d model today ready for printing. Water pickup for a live bait tank. This is a simple attachment that clips onto the trim tab with a single bolt to hold it into place. I use the 12mm High-Pressure…
- Downloads
- 52
- Likes
- 4
- Rating
- 0
P
Printableshcm3
Fiio BTR5 case for Phillips SHP9500
I modified Paul Fallon's BTR5 case to friction fit on the left side of the Phillips SHP9500 headphones. I made the mount with tight tolerances to snugly hold on to the headphones. When you put it on, you may have to spread the “curls”…
- Downloads
- 52
- Likes
- 8
- Rating
- 0
P
PrintablesCT1GFQ - Carlos Fonseca
Hamradio Fishpole Antena suports
Suportes para passar o fio da antena endfed ou long wire ao comprimento da cana. Na ponta possibilidade de fazer o L invertido. Also on: https://www.thingiverse.com/thing:5839928
- Downloads
- 50
- Likes
- 6
- Rating
- 0
P
Printableskbu
Philips SHP9600 Mod: Driver Cover with Bass Reflex Port (Semi-Open)
Inspired by the glass mod of the SHP9500, i made one for the SHP9600s, but i didn't like how the lowest bass was gone, so i made a bass port. Multiple sizes avalible, more hole means more deeper bass. I might make it an adjustable irys…
- Downloads
- 50
- Likes
- 3
- Rating
- 5
P
PrintablesPandanutiy
Phillips SHP9500 headband fix for more side pressure
Got tired of my headphones falling down when i tilt my head forward, so i designed this small-ish fix for it. Basically, it reduces the radius of the headband a bit which allows for higher side pressure. With this fix you can look down…
- Downloads
- 50
- Likes
- 4
- Rating
- 5
P
PrintablesJustinBridou
Magazin 24 Round Flashpup-S 4.5mm or .177
Vous aurez besoin du ressort du chargeur original. You will need the original magazine spring.
- Downloads
- 49
- Likes
- 1
- Rating
- 0
P
PrintablesDeeeezNuts
Funko Pop Pushpin Shelf - Logo Remix
Added an embossed Pop and Funko logo.
- Downloads
- 49
- Likes
- 7
- Rating
- 0
P
PrintablesNotatiation
Splashproof Rugged Snap-Fit SD Card Storage Box | No Parts Needed | Supportless
A Splashproof Rugged SD Card Storage Box. No Extra Parts needed to assemble, Prints in Place except one the Latch, which you need to Snap in. Make Sure to Print the Seal out of TPU and place it in in order to make the box Splashproof! Im…
- Downloads
- 48
- Likes
- 21
- Rating
- 0
P
Printablesanchorman.nz
SEADOO FISHPRO SIMRAD NSX3007 fishfinder adapter
FISHPRO Adapter for the NSX3007.. https://www.simrad-yachting.com/en-au/simrad/series/nsx/nsx-3007-ai-xdcr--ausnz-chart/
- Downloads
- 48
- Likes
- 4
- Rating
- 0
P
PrintablesVenture_3D
Shperical Crystal Holder (Moon)
Spherical Crystal Holder (with moon design) Designed to fit spherical crystals and display them in your home PLA for indoor use PETG for Outdoor use Scale to fit if desired
- Downloads
- 47
- Likes
- 9
- Rating
- 0
P
PrintablesJan Privat
Swashplate leveler for SAB 700 rc-heli
Use this swachplate leveler for SAB 700 Il Goblin Pro.
- Downloads
- 45
- Likes
- 1
- Rating
- 0
P
PrintablesBen
Cable Hook for Flashpoint Junior Wheeled Stand
Like most photographers, I've always just hung my extension cords for my lights on the light stand knobs or any other horizontal part on a stand/cart. Got tired of having to relocate the extension cables and hanging them elsewhere while I…
- Downloads
- 45
- Likes
- 10
- Rating
- 5
P
PrintablesExotechd
Husqvarna FE Crashpet
Print whit 80% infill NEW MODELL NOW OUT CHECK IT OUT !!! https://makerworld.com/en/models/161216#profileId-176940
- Downloads
- 42
- Likes
- 2
- Rating
- 0
P
PrintablesAlexander Ostroglyad
Magentic Pushpins
Magentic pushpins are small and handy tools used to hold papers or notes in place on metal surfaces such as whiteboards, bulletin boards, or fridges. They come in two different sizes, each designed to accommodate different magnet sizes…
- Downloads
- 41
- Likes
- 19
- Rating
- 0
P
PrintablesDouglas Duarte
Philips SHP9600 Earpads mount
I have designed this earpad mount so it's possible to make modified versions of the earpads. It's a tight fit, I have printed in PLA with 100% infill. No supports needed.
- Downloads
- 41
- Likes
- 5
- Rating
- 0
P
Printablesfirstgizmo
Amewi K120 swashplate
It replaces the upper part of the Swash plate, which is usually one of the first casualty during a firm contact with some sort of obstacle. Printing: The support material is allready fitted to the modell. just print it solid with…
- Downloads
- 40
- Likes
- 7
- Rating
- 0
P
PrintablesGreg
Blade 150S Swashplate Leveling Tool
Use this tool to level your swashplate. When the linkage and servo mid points are set correctly, all 3 nubs will be touching the swashplate at the same time. See photo for printing orientation. I used PETG.
- Downloads
- 39
- Likes
- 2
- Rating
- 0
P
PrintablesViperGTr
Heltec MeshPocket 10000mAh
This is a handcrafted copy of the Heltec MeshPocket (10,000 mAh battery version). All dimensions were taken directly from a real Heltec MeshPocket and measured as precisely as possible. Component placements, cutouts, mounting points, and…
- Downloads
- 37
- Likes
- 4
- Rating
- 0
P
PrintablesOuwekaas
MiniWhip Antenna holder for fishpole
A simple holder for the original MiniWhip (produced by PA0RDT). It fits on my fishpole with top diameter of 5mm. Printable right up, no supports needed. I printed with PETG Galaxy Black from Prusament. 0.2mm layers, Fuzzy skin enable for…
- Downloads
- 37
- Likes
- 7
- Rating
- 0
P
PrintablesGekko
Thumbtack / Pushpin with filament insert as pin
This is a simple thumbtack/pushpin design where the pin part is a piece of filament to provide adequate strength for multiple uses. I found this design works best for me taking longevity and ease of printing into account. Filament insert…
- Downloads
- 36
- Likes
- 6
- Rating
- 0
P
PrintablesPatrick
CFMoto 450MT Acerbis Bashplate Adapter for Lifts
Owners of this particular Bashplate who tried to lift their bike will know it's basically impossible to lift the bike evenly with a standard flat-lift. For me it leaned backwards + to the side-stand side. I printed it in TPU 100% infill…
- Downloads
- 36
- Likes
- 0
- Rating
- 5
P
PrintablesOrdinary Contraptions
Nailable Container For Pushpins
As you can see in the photos, it is a simple container to hold thumbtacks directly on the cork board for easy access. These are its overall dimensions: Print settings Printed in PLA, without rafts or supports, at 0.2 mm resolution and…
- Downloads
- 36
- Likes
- 4
- Rating
- 0
P
PrintablesJason H.
OMPHOBBY M7 Swashplate leveling tool
Just a nice print if you dont wanna spend 21$ on the metal one. This is the same size and verified working on my m7 it has a indent for a 4mm magnet to hold it on mainshaft. I printed mine @ 0.16, nothing to post process.
- Downloads
- 34
- Likes
- 1
- Rating
- 0
P
PrintablesA Regis
Ikea Skadis Pushpin Mount
Used to hang anything that can be hung on a pushpin or screwhead on your Ikea Skadis.
- Downloads
- 33
- Likes
- 7
- Rating
- 0
P
PrintablesDude
Pushpin Decorations
These are multi-color prints of a flower and butterfly to convert standard pushpins into functional decorations. The colors change by layer so manual filament swapping can be used instead of automatic. For the butterfly version, there is…
- Downloads
- 33
- Likes
- 5
- Rating
- 0
P
PrintablesJan Privat
Swashplate gauge holder (fits RC Logger)
Use this swashplate gauge holder, to easily check your blade grip angles without blades attached.
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
PrintablesChilihead
QE Baffle Cups for Hatsan .22 FlashPup and Flash
I was looking at the first and second baffles (clear plastic cups) for my .22 FlashPup. The forward opening was huge, so I assumed they mass produced them for all calibers of QE equipped air guns. I designed this to try in my .22…
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
PrintablesVasilii
Philips SHP2700 Earcup Connector
A part that connect earcups to the headband is prone to cracking so I decided to model a replacement. It consists of two parts (main one and small second half for earcup grip) and uses the same two screws that held original parts…
- Downloads
- 28
- Likes
- 5
- Rating
- 5
P
PrintablesPatrice Peccard
swashplate repair v2
New version of my first trial swashplate repair with an higher thread and a thicker round nut. Works perfectly on my rc helicopter (xk k110) Print Settings Printer Brand: ELEGOO Printer: ELEGOO SATURN Supports: Yes Resolution: 0.05…
- Downloads
- 28
- Likes
- 3
- Rating
- 0
P
PrintablesShlok SB
Pushpin Box for Corkboard
A simple holder for your pushpins. There are 5 holes at the top to use to make it as secure as you want (only 2 are used in the picture) and there are a further 2 holes at the bottom in the pushpin area to secure the bottom of the box too…
- Downloads
- 27
- Likes
- 6
- Rating
- 0
P
PrintablesAlex Lesman
SHP9500 Ear Pad Adapter Plate (Brainwavz, etc...)
This is an adapter for fitting after-market ear pads to the SHP9500, more specifically the Brainwavz oval ear pads. The design is based on the original earpad mounting plates but with a few small changes: holes for clips are mirrored so…
- Downloads
- 26
- Likes
- 3
- Rating
- 5
P
PrintablesJason H.
Oxy 5 Rc Helicopter Swashplate leveling tool
This is a swashplate leveling tool for the OXY 5 series of RC helicopters. Printing it at .12 res
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
PrintablesJ.A.
Polishpad holder 75mm
Einfacher Halter für 75 mm politurpad. Klettverschluss muss auf die Rückseite noch geklebt werden. Lässt sich ohne Stütz Struktur drucken.
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
PrintablesDanAndersen
Jellas Trashpicker / reacher grabber- Stabilization Lock
The Jellas foldable grabber / reachers joint is pretty weak. My kids broke it within the first week. This replacement stiffens the joint. PETG is still and still flexible enough and therefore recommended. Attached Fusion 360 Archive and…
- Downloads
- 24
- Likes
- 4
- Rating
- 0
P
Printablesjon
Scythe heatsink pushpin replacement intel retention (Shuriken , Katana, and others)
My scythe shuriken rev.B has one push pin broken, and other two that not hold very tight, the push pin system is specially a pain in small cases without any space to action and twist the pins I make this for completelly replacement. Hole…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesBored Prints 3D
Bread fishportal/feeding ring or portal.
It's a fish portal that you can use to see or feed your fish through if you have floating plants like duckweed.
- Downloads
- 23
- Likes
- 3
- Rating
- 5
P
PrintablesPapatutuwawa
SHP9500 Vilma Grill
Has worse soundstage but better bass.
- Downloads
- 20
- Likes
- 5
- Rating
- 5
P
PrintablesPrintgrid
Philips Headphone SHP2000 - Earpiece bracket
Printer brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: No Infill: 100% Filament brand: 3DPlast Filament material: CoPET or PetG
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesSpecter_03
Swashplate universal
Swashplate universal fixation: 1x M2 10 / 1x bolt M2 1x magnet 4/1mm Category: Hobby
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesVeszmadar
Rugged Moto tag splashproof case
Works well, but reduces the range where i can hear the beeping. BOM: 4x M3x12mm countersunk head screw (10mm works too) 4x M3 nut (there is space for self locking nuts) 38x2.5mm O-ring (i used these string silicon sealing, where you have…
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
PrintablesTyler A
Pushpin Magnet
A holder for some magnets I had laying around. Should accept magnets 6mm x 3mm
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesLukass
Benshpress dumbbell holder on wall
Just a holder on the wall carry around 15 Kg PETG Category: Accessories
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesPapatutuwawa
SHP9500 Grill
slightly better soundstage and weird but adds slightly more bass.
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
Printablesjeronbernal
Shpoolie! Modular Dry Box and Standalone Filly Spool Holder
Shpoolie — Modular Cereal Box Spool Roller Built out of frustration with every other cereal box spool holder on the market — specifically the PRAKI 4L cereal box. Every other design required pulling the spool out just to swap or refill…
- Downloads
- 18
- Likes
- 10
- Rating
- 5
P
PrintablesJulian Willett
Headphone Holder - Pushpin Version
Fully printable version without need for support. The holes are a bit bigger than an actual pushpin point, which was done given that holes on the base plate can shrink.
- Downloads
- 17
- Likes
- 1
- Rating
- 0