Counting matching models…
The case should be compatible with the original silakka54 and the SMD versions sold in Aliexpress. The case does not use PCB mounting holes. Heatset inserts goes into the frame and MCU cover. I recommend to add few rubber feet under the…
This remix of the original Silakka54 case has the following differences: case bottom is now solid case top has been integrated into the case bottom case sides walls has been reduced by 50% case walls are now shorter and matches the height…
tow behind tractor with forage superstructure created according to the original behind tractors created by @MrHanjak, the corresponding scale of the model is 350%
Simple tenting platform for Silakka54 keyboard. Works without or with bottom plate.
Simple tenting platform for Silakka54 keyboard with case . 5deg, 10deg, 15deg, 20deg, 25deg
The slim case is excellent but too low for three layer keyboards. The remixed case is higher to make it fit, and it fits well, height-wise. Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with…
Kit de mala e tenda para Silakka54 Este kit é compatível exclusivamente com o estojo sem parafusos Slim Silakka54: https://www.printables.com/model/1248872-slim-silakka54-screwless-case Ele fornece um sistema de suporte ajustável para…
A fully enclosed tenting case for Silakka54 split keyboard. Fit nicely around the USB port and the jack connector, has slim edges. Keyboard is press fitted and the electronics cover is screwed from the bottom. Left side file provided,…
This is a recreation of the Lightsaber of Jedi Padawan Reath Silas from Star Wars: The High Republic. It can hold a collapsing blade and a Lumintop EDC01 Flashlight . The blade is made up of 6 segments, each 18cm long, and it's about 85cm…
Simple changes to the standard case - Parts are for LH, please mirror in printing to make RH parts. Now compatible with AliExpress PCB's too! Heat press inserts are removed and replaced with holes for a countersunk Polyfix or self tapping…
😁 Please post your makes! ❤ Yet another remix of Squalius' excellent slim case for this wonderful keyboard! 🚀 This is for the Aliexpress V1.3 PCBS, but it might work on other variants. Will add pics tomorrow. BOM Same as original: 12x…
🚩⚠ I recommend my design here instead: Notes Remixed to accommodate V1.3 Aliexpress PCBs. The rest of this design has not been altered in any way.
Basic Versions I use on my Silakka54, modifications possible by Onshape ( LINK ) Update: 04.09.25 Added a tilted-corner and a tilted-corner-lifted
This is a clone of the invisiLav , a holder / mount for the smartLav that goes under your shirt or collar. It hides the mic and reduces noise from clothing. Use a medical double sided tape to attach it to your chest or undershirt. Print…
Silakka54 is a RP2040 Zero based 54-key column staggered split keyboard. PCB uses hotswap sockets. Design is inspired from REVIUNG41 and Corne keyboards. PCB is designed for MX style key switches. Current top plate only supports MX style…
The case should be compatible with the original silakka54 and the wired SMD versions sold in Aliexpress. The case does not use PCB mounting holes. Heat set inserts goes into the base. If you want to adjust the angle of the keyboard, you…
These models provide a one-piece case and a controller cover for the Silakka54 split keyboard in its unofficial AliExpress v1.3 edition. The version number is printed on the PCB under the controller. The v1.3 has soldered spacers, unlike…
LH side only. To make the other one simply mirror it in your slicer
Einfacher Druck evtl. Brim erforderlich Standardwerte für PETG benutzen
The cover was too short for the aliexpress Silakka I bought, so I modified it to give me the clearance I needed.
This is a 10 degree diagnally tenting base for Silakka54. I feel the diagnal direction is much more natural for me. It direcly snaps onto the original base. No other tools needed.
Remix of 25deg stl for aliexpress version of the PCB. Keeping the file only for left split. Mirror model in slicer.
Do pobrania mój projekt obudowy i zasilania do Analizatora/Miernika GM328A. Do zasilania wykorzystane ogniwo 18650, lista części: Miernik GM328A https://alii.pub/6vtt92 Konwerter J5019 DC DC Step Up i ładowarka Li-ion Wskaźnik baterii 1s…
Welcome to Kubu Tama, your gateway to collaborative growth through the exciting world of 3D printing! For just $8 per month , embark on a journey where creativity meets entrepreneurship. With our subscription, you gain access to our…
Update 2026-03-18 Added modified keycap anchor key This is a slight modification of @bassamanotor remix, which is based on the original (see remix list) This prints face down with FDM instead of resin. Made the stems holes 4mm deep to fit…
Silakka54 carcasa para la versión de 3 placas de aliexpress. Se basa en otra carcasa que había de tornillos, en este caso se reduce el tamaño a su mínimo posible, y se cierra completamente los chips. El izquierdo tiene el tamaño idóneo…
Sergio's Model: 3D file Haunted Mansion Silas the Caretaker 3D Printable Diorama 👻 ・3D printable model to download・Cults (cults3d.com)
Simple USB Power Supply Box, EU standard. Proste pudełko na zasilacze USB. Standard EU
Curved surfaces removed from keycap tops
Do złożenia całości potrzeba: 2x nakrętka m4 2x śruba m4 z łbem walcowym, imbusowa o całkowitej długości 54 mm (długość gwintu 50mm, główka 4mm) - do skręcenia dwóch części wtyczki, 8x śruba m3 z łbem grzybkowym, imbusowa o całkowitej…
Update 2026-03-18 Added a 67mm high case that can accommodate taller keycaps, such as these: This is built around the excellent screwless case and tenting platform , and provides a carry case with a slot to hold the cable. Use a rubber…
With this spacer plate, your top plate (that you attach the switches to) does not float. Important The final height of this part should be 3.3 mm . I got to this figure by measuring the gap between the PCB and the switch plate after I…
Different controllers on the PandaKB Silakka version got me to find a model, and I really liked the friction fit method. Remixed this to make a version that would fit the keyboard, and a 503450 battery under it as well. It is a basic…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro vás velmi šikovný klip na vysílačku Baofeng UV 5R . Jde o variantu pouzitelnou pokud pouzivate vetší baterie na USB C, coz je mnohem praktičtejsi kvuly nabijeni na…
Used the spin feature in blender eyeballed it, came out at a little over 20 degrees.
OPV-8301 is the most modern vessel of the Philippine Coast Guard. BRP Gabriela Silang is named after Gabriela Silang, the first female revolutionary leader during the Philippine Revolution, later known as the "Joan of Arc of Ilocandia".…
Jeżeli chcesz mieć zasilacz razem z przewijarką to ten projekt jest idealnym rozwiązaniem. Musisz kupić; silnik: GA37RG regulator: 1203BB 3A 80W 834 Przetwornica napięcia 230V na 12V AC-DC 8A 100W Gniazdo AC ósemka do zabudowy…
Notes Securely holds the two halves together. Friction fit sliding top. No room for cables I want to mention that if you have rubber feet attached to your keyboard, this carry case will not work for you. I will rectify this shortly. Works…
Model do zastosowania gdy chcesz zamontować podwójną oś Z w drukarce Ender3. Utrzymuje zasilacz z boku profila. Drukuj warstwa 0,2, wypełnienie 100%
Cannot find sth for my powersuply Here is Cover + Holder Check dimentions before print.
Wall housing for 12V 80W LED power supply, SMART LED 4132. For wall mounting with screws. Obudowa ścienna zasilacza LED 12V 80W, SMART LED 4132. Do montażu na ścianie za pomocą wkrętów
Türk Silahlı Kuvvetler Lithophane
Compatible with PandaKB Silakka54 Wired Split Keyboard (QMK/VIAL & Tenting) – Magnetically secured with m4*3 magnets.
Udostępniam prosty model zatyczki wodoszczelnej do gniazda zasilania DC 5.5x2.1mm. Wydrukowane z użyciem Fiberlogy MattFlex 40D. Udostępniam w dwóch wariantach: gniazdo kątowe montowane od środka obudowy (…
Mocowanie zasilacza z monitora samsung pod biurko, stół, grubość blatu 18,20 mm. Rozmiar zasilacza 45 mm szer x 29,95 mm wys. Ułatwia podwieszenie zasilacza, estetycznie wygląda. Mounting the power supply from a Samsung monitor under the…
A custom case and cover for the silakka split ergo keyboard, designed to allow the attachment of LEGO pieces
Remix of 10deg stl for aliexpress version of the PCB. Keeping the file only for left split. Mirror model in slicer.
Obudowa zasilacza do montażu wentylatora 60x60x15 12v. Montaż zasilacza z boku przy zabudowie dualZ
Holder Zasilacza POE Ubiquiti model GP-A240-050 i 050G (nowsza wersja zasilaczy ).
W tym miejscu znajdziesz elementy aby zamontowac zasilacz na scianie IKEA Skadis oraz adapter do zamontowania w plycie dla latwiejszego podlaczania. Here you will find the components to mount the power supply on the IKEA Skådis wall and…
Box for silacagel in closed filament box. Designed for 3D printers who use closed dry filament boxes for printing ... specifically this type:…
Uchwyt do zasilacza od laptopa firmy MSI model ADP-330CB-B. Wymiary wewnętrzne kieszeni to 102x48mm. Uchwyt montowany jest na dwie śruby meblowe o głowie walcowej M6x15 plus mufy do drewna (widoczne na zdjęciu). Do trzymania zasilacza w…
Holder Zasilacza POE Ubiquiti do modelu UBI-24-5 (starsza wersja zasilaczy).
Holder Zasilacza POE Ubiquiti model UBI-POE-48-5G (starsza wersja zasilaczy ).
This case allows easy transport and protection of the Silakka54 keyboard when using the Yet Another Remix model by Bassamanator (thanks for that awesome design). This case will snap together using 7x2.7mm magnets (x8) (I think this is…
I designed this for use with Star Citizen and other games where there is a combination of flying and walking on foot or using land vehicles. I like my joystick centered which leaves nowhere for the keyboard. I use a Virpil WarBRD so it's…
Trimethyl(4-vinylphenyl)silane (C11H16Si, CAS 1009-43-4) — a free educational 3D molecular model for teachers and students, by MolGod.org. Read the atoms directly: each sphere bears an engraved element symbol. Start with the ring system:…
The case should be compatible with the original silakka54 and the SMD versions sold in Aliexpress. The case does not use PCB mounting holes. Heatset inserts goes into the frame and MCU cover. I recommend to add few rubber feet under the…
The slim case is excellent but too low for three layer keyboards. The remixed case is higher to make it fit, and it fits well, height-wise. Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with…
Simple changes to the standard case - Parts are for LH, please mirror in printing to make RH parts. Now compatible with AliExpress PCB's too! Heat press inserts are removed and replaced with holes for a countersunk Polyfix or self tapping…
The case should be compatible with the original silakka54 and the wired SMD versions sold in Aliexpress. The case does not use PCB mounting holes. Heat set inserts goes into the base. If you want to adjust the angle of the keyboard, you…
Holder Zasilacza POE Ubiquiti model UBI-POE-48-5G (starsza wersja zasilaczy ).
Uchwyt do zasilacza od laptopa firmy MSI model ADP-330CB-B. Wymiary wewnętrzne kieszeni to 102x48mm. Uchwyt montowany jest na dwie śruby meblowe o głowie walcowej M6x15 plus mufy do drewna (widoczne na zdjęciu). Do trzymania zasilacza w…
Small is for two wheel drive, large for high horse power tractors. May take effort to get to pivot first time.
Update 2026-03-18 Added modified keycap anchor key This is a slight modification of @bassamanotor remix, which is based on the original (see remix list) This prints face down with FDM instead of resin. Made the stems holes 4mm deep to fit…
This is a living project, meaning, I make improvements all the time. You will have access to all iterations of the case. * This design is not complex at all, but any 3d printed assembly requires a well calibrated 3d printer! ** This case…
This case allows easy transport and protection of the Silakka54 keyboard when using the Yet Another Remix model by Bassamanator (thanks for that awesome design). This case will snap together using 7x2.7mm magnets (x8) (I think this is…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro vás velmi šikovný klip na vysílačku Baofeng UV 5R . Jde o variantu pouzitelnou pokud pouzivate vetší baterie na USB C, coz je mnohem praktičtejsi kvuly nabijeni na…
Dummy model of this part: https://www.ossila.com/products/four-point-probe-head?variant=44570049937624 I made it for work to help design fixtures to attach the probe head on our own equipment.
Projekt jest przeznaczony do odtworzenia funkcjonalności i wyglądu sprzętu elektronicznego. Dotyczy to zasilacza stabilizowanego (warsztatowego) produkcji byłej Czechosłowacji z połowy lat siedemdziesiątych ubiegłego wieku. Model tego…
Obudowa zasilacza dla trzech oddzielnych i niezależnych taśm LED. W projekcie użyłem zasilacza LED 12V, przełączników oraz odłączalnego przewodu 230V do radioodbiorników. Power supply housing for three separate and independent LED strips.…
Hello this is my version of the silan mask, it doesnt have all the details or eye holes but you can cut them out. the sizes arent accurate so you may want to edit that a little (no i did not make the mask from scratch. a friend of mine on…
Print in assigned colors, and if you are going to paint it, print the box and body in white. Glue needed for assembly.
Small is for two wheel drive, large for high horse power tractors. May take effort to get to pivot first time.
This is a living project, meaning, I make improvements all the time. You will have access to all iterations of the case. * This design is not complex at all, but any 3d printed assembly requires a well calibrated 3d printer! ** This case…
*This design is not complex at all, but any 3d printed assembly requires a well calibrated 3d printer! **This case is specifically designed for the Aliexpress v1.3 PCBs. Other variants might work as well, but those have not been tested.…
Divider for Drawer Silafix Gr5. Made for Micro-SD Boxes. Teiler für Sichtlagerkasten Silafix Gr5. Für Micro-SD Boxen. https://www.vsi-kunststofftechnik.de/sortiment/sichtlagerkaesten/sichtlagerkasten-silafix-gr-5/…
This is a modified rear box for mounting hungarian mirror light Rabalux Silas. The original box has gromet for mains cable not in center of the box, which may be bad, if you have your mains cable centered above the mirror. For this case,…
Pancasila Ear Saver Mask Relief Strap Category: Accessories
Model Filabox is a filament sample box that I created because I wanted my own setup for organization of filament samples. Seeing the other filament sample spools and organization options, I wanted a more flexible way to work with my own…
pozwala zamontować zasilacz od laptopa na ścianie lub innej pionowej powierzchni
