Counting matching models…
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
This is a helper for cable soldering. Exchanged to a faster to print design and attached CAD file. Update 16.04.2023: As requested I added a chamfered version of the model. Thanks and Credits to the originator of this print: mistertech…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Sometimes it's necessary to solder wires directly to LED stripes instead of using connector plugs. I'm using this tools especially to make connections if I use the LED stripes in wet or damp environments to prevent the contacts from…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
When installing heat set inserts, a press tool can be a great help to ensure everything is aligned and straight in the end. And if you have a Dremel anyway, the Dremel Workstation can be a very versatile addition to your tool collection…
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for PETGSource material: PET
Hello 3D Printing Enthusiasts! This Thing is my version of Soldering Tweezers! Simply print the long base, 4 handles, assemble, and you get a super versatile wire holder for your soldering station! The original tweezers design was remixed…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
The wires (or component, such as a switch or LED) are held by the flexible fingers so that you have two hands to hold the soldering iron and solder. The springs added to the original design provide greater flex in the fingers and a wider…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Introduction Minimalistic solder fume extractor with 120mm fan and two active coal filters. Easily prints in three separate parts and slides together into a space efficient and sturdy package. The bottom is fastened with two countersunk…
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
Remixed solder station from the ThingiVerse link below. The main changes are the space for solder wire spools which have been enlarged. The solder station design have been changed to suit my needs but feel free to grab the source file…
Print approx. €3.99–€4.88 excl. taxPreliminary estimate for one variant
Ergonomic Solder Paste or Flux syrynge extrudes dispenser extruder Simple but effective and comfortable to use, large surface area touching the plam of your hand Easy to print Print instructions print oriented with flat surface to bed (…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
Miniature woman for your diorama, architectural miniature or as a figurine. Woman | Girl | Tourist | Soldier | Architectural figurines | People | Model Woman with long hair wearing jacket, pants, hiking boots and backpack. She is suitable…
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant
Overview I modeled this after the Hakko 599B soldering iron tip cleaner. I've been using it for several years and it's worked quite well for me. The biggest feature is how the base of this model has plenty of space for weights to be…
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for one variant
About I wanted to have more compact version for more tips with option that tips will not fall off if held sideways or upside down. I took original ‘Bin - 1x1x3 - pmcquay.stl’, added fill and holes with tiny locks inside the holes that…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Man | Soldier | Army | Architectural figurines | People Printable for the most common scales (with man height 185 cm): 1/12 scale: 154.2 mm 1/24 scale: 77.1 mm 1/35 scale: 52.9 mm 1/48 scale: 38.5 mm 1/50 scale: 37.0 mm Print with tree…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Fully printable parachute for toy soldier. Vase mode for lower weight. No glue needed. The model consists of three parts, which is printed separately. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Main body needs to be…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Updated 07/09/2022 A bracket has been added for use on ikea skadis or similar murals. ********************** First I want to thank the user JAAANIK for his cool design "PARKSIDE X20V TEAM KSGER STM32 OLED T12 PORTABLE SOLDERING STATION"…
Print approx. €3.53–€4.32 excl. taxPreliminary estimate for one variant
Hello, Today I have a Rabbit soldier with a gun for you. The figure is suitable for a war diorama. Or for coloring for children. I used PLA/PETG as the material. You need to use supports!!! If you are interested in my work, the links are…
Print approx. €6.09–€7.45 excl. taxPreliminary estimate for one variant
In case you need to solder header pins to a new Raspberry Pi Pico, here is a handy rack to keep everything in place. Got inspired by this model: https://www.prusaprinters.org/prints/44141-arduino-nano-every-solder-holder
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
This is an original artwork that takes inspiration from nanoleaf projects. My twins loved Hexagonal-Alexa enabled - light so I elaborated this model in thinkercad and prepared with several trials&errors About the model itself: @ it has 2…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
The characteristics of my model: fixable on the desk with a clamp or weight it lower and better accessible, better for me to work better wire alignment, because of two clamps the model is for diameter up to 1,8mm scale 170% (like in the…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
I wasn't satisfied with the other 3D printable designs out there for a 120mm PC fan based soldering station fume extractor fan. I felt they'd take too long to print and/or use too much plastic. Thus, I decided to leverage some of the…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
I was looking for a way to move/store my Weller WE1010 soldering station, without moving the 2 parts individually. So I created this simple solution. Print with 4 walls and 42% infill minimally, as the left part is quite heavy.
Print approx. €6.20–€7.57 excl. taxPreliminary estimate for one variant
This is a stand I made so that I could attach a magnet to my soldering stand. This way, instead of using the clamp coming with it, I can just stick it to a ferromagnetic surface, making it much more useful. Just in case you need to edit…
Print approx. €2.48–€3.04 excl. taxPreliminary estimate for one variant
I like the simplicity of the original model. But it has closed clamps. So I designed one with open / flexible clamps.
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
Soldado Medieval Articulado DUMMY13 Este es un modelo mejorado apartir del soldado de armadura pesada de makerworld. A diferencia del original de makerworld, este fue mejorado para ser imprimido sin soporte excepto unas 2 piezas requieren…
Print approx. €5.74–€7.02 excl. taxPreliminary estimate for one variant
The goal for this model was to find a solution for soldering small PCBs. I always had difficulties with holding the soldering iron stable and this is relatively important with small PCBs. That's why I wanted to design a soldering help to…
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant
I designed a few DIN Rail tool holders, to store my most frequently used tools on the side of my Lack enclosure. Check out my DIN Rail Tool Holders collection . All my holders are intentionally designed with some play. So, every tool can…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Stopping plates for T12 soldering station under desk hanger I found these pretty under desk hangers from maco2229 which I wanted to use. But my KSGER T12 soldering station's and SMD rework station's face plates are flush with the rest of…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Box for gridfinity system for my solder sucker/desoldering pump
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
I designed this holder for my desoldering pump. Its handle has a diameter of 14.5mm. My peg board is from Topex. The pegs aren't perfect, so I used a drop of hot glue to secure it in place. Happy 3D printing!
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Small box and stand for soldering tips for Pinecil or TS100. The case is designed for short tips (88 mm length). Adjustment for longer tips: In case use have “normal” (105mm long) ones you can adjust the model in following ways. adjust…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
EN: There are many tools on the web for connecting electrical components, but I have not been able to find one that suits me completely. Either they are too bulky and the components to be joined don't stick in them, or they are too short…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Hello, I have Mechwarriors soldiers, robots for you. Beautiful detailed soldiers, robots for coloring, for exhibition. My kids love these characters. Mechwarriors are fully authentic, very detailed. Good luck with the printing! I used…
Print approx. €25.63–€31.33 excl. taxPreliminary estimate for one variant
Three arms on a base can support your two pieces to be soldered and the solder. When connecting or disconnecting the joints, push them together in line. If pushed together at an angle, the tines tend to break off. That does not completely…
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
Parts list: 2 Magnets in 5x3 mm I experimented with smaller magnets but they did not give me consistent results, but the thicker Base fits nice. If anyone wants i can make one for Round Handle Bases, just leave a comment. Assembly…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
While there are custom heat set insertion presses, often including a cheap soldering iron it seems like a waste of resources if you already own a high-quality soldering iron or even a soldering station and a drill stand. The only missing…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
Easily printable solder tip cleaner with sponge and brass wool. I printed it from PETG with standard settings. No supports needed. I used half of S0354 sponge and brass wool BC-10 THERMALTRONICS. Max sponge size: 38 x 38mm Max brass wool…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
This design exists of 2 parts, the holder and a container to collect solder falling out the pump. See also my other designs for more ways to Organize your tools on the Skadis board.
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
This is a mount for holding a container of soldering flux on the IKEA Skadis board. It's a remix of the Skadis holder for tip tinner (Thermaltronics, 20 g) by Rai but made bigger. Thanks Rai for publishing the FreeCAD file, it made it so…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
An English Instruction is further down. Ein Akkubetriebener Lötdampfabsauger, damit man beim löten nicht die ganze zeit diesen wunderbaren rauch einatmet. Bis zu fünf 18650 Akkus können in das Gehäuse gepackt werden. Mit einem Step-up…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
Použité tiskové parametry: tryska 0,4 vrstva 0,15 perimetry 2 límec PLA Printing parameters used: nozzle 0.4 layer 0.15 perimeters 2 collar PLA
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A simple horizontal stand for the amazing Solder Fingers 2.0 - soldering aid / helping hand by idig3D | Download free STL model | Printables.com Material: PETG/PLA Layer high: 0.30mm Infill: 15% Supports: No
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
I created this model to simplify de-soldering Kalih hot-swappable sockets for MX-compatible keyboard switches. Idea being to place it under the PCB as if it was a switch, and then let gravity gently push the socket up from the PCB once…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Soldering station for Baseus 65W charger and USB C powered soldering iron. Prints with no support Holder uses 608 bearing, M3 Nut and Bolt. (Would suggest 6900 bearing for TS80). M3 nut and screw Print vertically (as shown in the picture)
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Otočný nástavec pro odsávání (další díly k celé sestavě jsou na mém printables účtu)
Print approx. €17.58–€21.49 excl. taxPreliminary estimate for one variant
Holder for desoldering vacuum pump ERSA VAC 3 with approx. 22mm diameter. Uses the IKEA Skadis twist-clips from https://www.printables.com/model/256896-skadis-t-clip-system designed by Line Arc Line. - Thanks for that design!
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
This is a mount for holding an Engineer SS-02 Solder Sucker on the IKEA Skadis board. It also includes places to store the spare silicone tubes. It uses the IKEA Skådis Secure Clip System Template from mkingery , and a pair of the clips…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
I recently got a soldering kit for Christmas, and I thought the buttons were a little bit boring. So I thought I might as well design my own. I modeled them in FreeCAD and then printed them on my MK4S with a few color swaps here and there…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
In https://www.printables.com/model/426277 I provided automatically converted LDraw.org parts. While they provide thousands of parts they are mostly designed for rendering and not for printing most of those parts are not manifold and thus…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Holder of 11 tips for the Solomon SL-916D soldering and desoldering station. I printed it from PETG with standard settings. No supports needed. Soldering tip hole diameter: 6mm Desoldering tip hole diameter: 7.5mm Object size: 120 x 40 x…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
Made a 4x1 Desolder Pump holder with a holder for rosin flux and desolder wick Made the step and fusion file available if u want to change the diameters and such in the timeline Print like any other gridfinity file i made it in 0.3mm as i…
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant
A practical 2×3 Gridfinity module designed to keep your solder paste tools perfectly organized. It provides dedicated slots for a 30 ml syringe, the matching plunger, and up to four dispensing tips – so everything stays tidy and within…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for one variant
Introduction You may find yourself needing to connect a waveshare device with a raspberry pi that has no GPIO header, like my Zero 2 W (as opposed to Zero 2 WH, which has the header). You don't need a full 40-pin header. Just fit the few…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Introduction My local hobby market sells solder wire by ELCHEMCO, cut to short, core-less and spool-less coils. To give the solder some protection in my toolbox, I made this simple, hacky dispenser. Printing I print the dispenser in PETG,…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
If you want to support me and my projects you can now vote for me at the Printables Awards 2025! :) The Solder Cable Holder is a compact and practical tool designed to keep two cables perfectly aligned during soldering. It uses two…
This is a fully printable third hand to help with soldering small parts or to hold something still while you work on it with your two other hands. The clip has to be printed with supports for the part that attaches to the “snake”. You can…
This is a remix of the cool Thingiverse project of mordaha that I optimized for my requirements in the following terms: used 2x M3x20 screws as lever axles instead of 1x M3 screw and 1x filament levers have a bit more space to each other…
Cable holder for soldering: 4 different cable sizes diameter 6, 5, 4 and 3 mm
Practical support for tin soldering iron. Universal size. Its small folded size allows it to be stored anywhere. Very practical to carry in the toolbox. Print in place.
While this isn't strictly a remix, I wanted to give "idig3d" credit for the inspiration. I created a soldering helping hands http://www.thingiverse.com/thing:1635453 but when I saw idig3d's version, I liked the simplicity and faster build…
This part was originally on thingiverse. I will move it here as the site had problems with stability and spam. Feel free to browse the comments and makes here . This is a custom hotend duct, which uses the stock fans and improves part…
Update: "wheel_holder_noHex.3mf" is uploaded if the hexagonal cutouts is not for you. Made a simple cad model to hold a heavy Solder wheel for people to use at my workplace. Solder roll supported: 64mm - high max 80mm - diameter max 14mm…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
Add a bold touch to your shelf, desk, or workshop with this battle-hardened beauty! Some supports needed, organic type works great. Happy Printing!
What it is Small soldering jigs for LED strips that allow to cut and fix the then stripped cables in place. With a dab of hotglue or some heat-shrink tubing it may even stay in place to secure the finished connection. How to print…
Tired of struggling to hold wires steady while soldering? This 3D printed clamp is designed to make your soldering work cleaner, faster, and easier. It securely holds two wires in place so you can solder them together with precision—no…
:IMPORTANT THREAD / BOLT INFO: I had to scale the clamp bolts up in size about 1-2% and the bolts for the base about 3-5%. That's what worked for me and FOR MY LIKING - everybody's setup is different, your mileage will vary, everything…
Yes I know, it's tempting to use a discarded PC fan as a solder fume extractor, but it usually doesn't do the job quite well. That is why I opted for an industrial fan with impressive specs. The Noctua NF-F12 industrial PPC-3000 PWM has…
Designed for springs 30x7,7x0,65mm
Handy tool for every soldering station. Accepts standard syringe style flux cartridges. Turn the know for precise extrusion. If you have trouble with bed adhesion while printing the screw, there a few tips: slow down use 'external…
I recommend printing the Solder Scroll tool and the modified spool from PETG. Press the larger area onto the backing, then snap the two parts together. After winding the soldering wire, clip it with the wire cutters flush with the coil.…
Reformed the clamp, so it closes all the way and also deforms the cable to be able to also clamp very thin wires. The base must be printed together with the clamps (print in place). The single files of the base and the clamps are only for…
Solder helping hands are an awesome aid in the workshop. Helping hand arms need to be flexible and precise so you can easily position objects. These 3D printed helping hands are easily configurable to have more arms or be longer with the…
The 3D modelled Solder Paste and Flux Dispenser is a compact and efficient device, perfect for electronics assembly. Its ergonomic design makes it easy to use, with adjustable dispensing volumes ensuring accurate and consistent results…
The soldier goon mask from squid games. Also comes with the stencils for creating/painting the rank on the mask (triangle, square, circle). model was created by kimgooni on Thingiverse
Modificación de el muslo abdomen y pecho del modelo DUMMY 13
Remix of the Original Solder scroll to fit standard spools
Features: A big Jig for big wires A middle Jig for normal wires (Can be stored inside the big Jig) A tiny Jig for soldering in very small places Sizing: You can sie down the SolderHelperSmall + SolderHelper Big to ~70% if you work with…
Reupload of https://www.printables.com/model/909348-soldering-tool-holder-flexible-arms-helping-hand-v split into single part files. I have respected his model licensing, however am unable to select a different origin as it won't let me…
Needed to solder some LEDs and didn't have three hands so I sketched this up in F360, works great! Made a three pin, a 90° three pin, and a four pin. Update 2024-01-04 Added version 2 of the 3pin jig with a shorter length Added version 2…
When you want to solder two cables together and dont have four arms to both solder and hold the cables. All kind of cables fit into the different slots. A "helping hand" can damage your cables, especially if the cables are hot. This…
The mini soldering helper is a tiny model that holds your wires and solder. it prints in 5 pieces, and a small wheel dispenses your solder onto the clamped wires. This is primarily designed to hold wires together in places that an octopus…
This files are a remix of the common Lucky 13 gear. This include Patrol Cap and Rucksack with the US Army Sergeant First Class Rank and more.
SOLDR This is the 3D print files needed to build you SOLDR. For more information about this project please head over to our website https://www.soldr.pro/ What is SOLDR? Modular & Versatile SOLDR features a magnetic modular grid that lets…
Featured in 3Printr.com ! When soldering, it’s crucial to protect yourself from harmful fumes. That’s why I designed this fume extractor—not only to redirect fumes but to completely remove them from your workspace, ensuring clean air for…
If you like my work and want to support me bringing you new content please consider supporting me on Thangs Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This clamp makes it easier to solder cables and other electronic components. It is the perfect addition to the soldering station and the articulated arm . The base plate of the soldering station is a 1.5 mm thick sheet steel. Therefore,…
A modular soldering helping hands design using a compliant mechanism clip. Have up to 6 different arms with differing maneuverability and stiffness depending on the ball joint arrangement. Base functions on its own, but has the option to…
Everything was printed at 0.15mm resolution, the “ChestRig” file requires supports, and should replace the “00B04 skin chest 2” piece, the rest of the stl don't requiere support. The Magazines can be fit into the chest rig too, if there…
Soldering is a many hands' job. Things to hold include: A soldering iron The PCB A component/tweezers Solder wire That is usually at least one thing too many for creatures that have on average less than two hands. Thus I bring you a…
Detailed soldiers If you like this feel free to check out my other models
Simple flexure design for holding cables together for soldering. No hardware required with print-in-place clamping arms Print with PETG with a 0.4mm nozzle or smaller! I also suggest 3 walls with 15% rectilinear infill. This model is…
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
Snaptronics gives you a bunch of solder-free 3d-printed bricks to build various basic circuits in a breeze on a magnetic snap-fit basis.
This is just a very minimal remix of SpDave's Solder Iron Holder on Thingiverse . I was just looking for a very basic, but sturdy soldering iron stand, and this is what I came up with. I also added some space on the bottom to be able to…
Update: Empty bottom version is now included! New, smaller version for printers like Prusa MK3, MK4! I've made this box for one of my soldering irons. The bottom part was modified for the organized holding of accessories like tin spools,…
Full instruction writeup on instructables: https://www.instructables.com/Razer-Viper-Mini-Wireless-Mod-G305/ It will likely ask you if the baseplate file should be separated, it should not be. I can no longer combine the bodies in Fusion…
Winter Soldier Inspired Arm Glove NOT included Enjoy (Edit) I noticed the thumb wasn't finished. I fixed and uploaded a fixed one. Very sorry about any confusion You can use Meshmixer or your choice of modeling software to separate the…
Solder spool holder, fits most. print the support twice, it assembles with a press fit, not to loose not to tight. Print instructions Print the support twice
This is a simple soldering fume extractor. It uses an active carbon filter commonly found in hardware stores and used also in your kitchen fume hood or in cat toilets. The design is quite simple, no need for screws or anything else. All…
The smoke from a soldering iron has been annoying me for some time now, I'm used to it, but my roommates aren't, and what's more, the smoke is toxic, so it would be good to get rid of it somehow, so I took an old 12v fan from a PC,…
