1,804 models
An anti-sphere inspired plant pot, giving it a very spacy and futuristic design loking like it is coming from the year 2148 ! Your plants will love it! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
Use normal supports on build plate only. A compact twisty sensory fidget sphere with a spiky textured surface. The sphere is built from rotating segments that can slide and twist along the central axis, creating a satisfying mechanical…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
Print approx. €5.37–€6.56 excl. taxPreliminary estimate for one variant
We know some of you have been waiting for this quite some time, so here it is! - The new Anti-Sphere Pot 2! (now with only 9 spheres in a row) Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura…
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for one variant
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Print approx. €11.13–€13.60 excl. taxPreliminary estimate for one variant
A spiky sensory fidget sphere designed for tactile stimulation and stress relief. With a diameter of 80 mm, the surface is covered with evenly distributed spikes that create a pleasant massage-like sensation during use. The model prints…
Print approx. €4.38–€5.35 excl. taxPreliminary estimate for one variant
Test the limits of your printer! Pin Support Sphere ChallEnge is a way of testing your printer's capabilities. It is designed to be hard to print, so only well-calibrated printers with quality filaments will print out a nearly perfect…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This is a sphere printed in two parts with a threaded connector to attach each piece. Its design allows printing without supports, which gives a nicer finished look to the part. You can also mix and match colours! Use a dab of super glue…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Use normal supports on build plate only. A compact twisty sphere fidget toy made from rotating segments that slide along a central axis. The segments can twist, extend, and compress, creating smooth and satisfying mechanical movement.…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
A low poly sphere.
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant
Use normal supports on build plate only. A spherical twist-style fidget toy designed for smooth motion and satisfying tactile interaction. The segmented structure allows the sphere to expand and twist into a dynamic spiral shape, creating…
Print approx. €8.73–€10.66 excl. taxPreliminary estimate for one variant
A simple spherical vase and/or plant pot for your flowers and pots. The design is created using a Voronoi structure. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
Print approx. €5.11–€6.25 excl. taxPreliminary estimate for one variant
Print it on two parts sliced on 38.1 mm both parts as show at the end of the photos , 20% prusa classic infill (No supports needed) PRINT CONFIG
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
Can be scaled I printed in two sizes 50mm and 30mm.
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
Use normal supports on build plate only. A compact twisty sensory fidget sphere with a rounded textured surface. The sphere is built from rotating segments that can slide and twist along the central axis, creating smooth and satisfying…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
As a modelling challenge for myself I made a copy of a wooden puzzle I bought on Amazon some time ago. It seems to be a classic design found in many toy puzzle collections. In orderr to make this print without any supports I separated the…
Print approx. €4.28–€5.23 excl. taxPreliminary estimate for PETGSource material: PET
A replacement for a common type of ball-shaped, spring-loaded stopper, for tightening drawstrings on clothes, bags, etc. You'll need: 1x print included “Body” model 1x print included “Plunger” model 1x spring +-11mm long, +-7.5mm outer…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Učebná pomôcka. Pre úsporu materiálu je dutá.
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
Use normal supports on build plate only. A compact twisty sensory fidget sphere with a dimpled textured surface. The sphere is made from rotating segments that can slide and twist along the central axis, creating satisfying mechanical…
Print approx. €1.30–€1.58 excl. taxPreliminary estimate for one variant
A photogrammetry scan of a Sphinx statue in Prague Rudolfinum. Postprocessed in Blender 2.8 The photogrammetry software used is free and here's the video guide: and an article guide:…
Print approx. €11.05–€13.50 excl. taxPreliminary estimate for one variant
Swissphone Boss Meldeempfänger Clip.
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
This Mini Sphere Buddy is the smoothest, roundest little friend you’ll ever need! 🏀✨ Perfect for adding a fun geometric touch to your desk, shelf, or workspace. ✅ Perfectly Round & Adorable – A tiny sphere buddy for any occasion ✅ Great…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Additional materials needed : 6x magnet D4mm x 1.5mm LEDs Lunartec (D90mm x 22mm) PLA magicPLA Metallic Emerald Printing without supports Nozzle 0.4mm Layer 0.3mm
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant
WARNING - CHOKING HAZARD! SMALL PARTS! KEEP AWAY FROM SMALL CHILDREN! INTRODUCTION This is a very satisfying sphere using the Hoberman mechanism. It is a truncated icosahedron, with 12 pentagons (5 sides) and 20 hexagons (6 sides) that…
Print approx. €6.73–€8.23 excl. taxPreliminary estimate for one variant
This is an improved version of the original design at: NOCTURNAL - Use the Stars to tell the Time [original design] by 3DMason | Download free STL model | Printables.com NOTE: This is for use in the Northern Hemisphere only. The…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This model is a 2 frequency breakdown of an icosahedra. The procedure I followed was from “GEODESIC MATH AND HOW TO USE IT” by Hugh Kenner, 1970 edition. Method is chapter 10.
Print approx. €8.51–€10.40 excl. taxPreliminary estimate for one variant
The sphere has a diameter of 36cm. It is made up from 12 five point stars and 20 six point stars, but this time the stars are twisted. This gives a very organic effect. It's based on a truncated icosahedron. One of the six point stars…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Night light lithophane for Battlestar Galactica fans.
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
it's a round cube with a 13mm metal ball inside What you need: 1. 12mm-13mm meta ball 2. Glue Assembly: 1. Place the metal ball in the cube halves marked with the "1" 2. Fill the holes of the cube half "1" with glue 3. Glue both cube…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
A model of a truncated icosahedron sliced down the middle.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Testcube for mk3s with mmu I also use the test for the different shrouds - you can see from the sphere how even the air distribution is
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for PETGSource material: PET
The sphere has a diameter of 36cm. It is made up from 12 five point stars and 20 six point stars. It's based on a truncated icosahedron. One of the six point stars houses the fitting. The stars are connected with paper splitpens. Here is…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
This is my remix of herbert_b1's EggBot. The main change is that on the main body, the pen holder has been removed and replaced with a modular box. Now you can use the Eggbot without a side box or with any you want. I designed three…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Use the HI-LINK LD2410 motion and presence sensor with Wemos D1 min in esphome. I can also use it to measure light, moving distance, still distance, moving energy, still energy, detection distance, and more with home automation. Use PET…
Print approx. €2.44–€2.99 excl. taxPreliminary estimate for PETGSource material: PET
I use the HC-SR04 sensor to measure the distance of a person approaching to turn on or off the light with Home Assistant automation. I use the D1 Mini board.
Print approx. €2.49–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
WARNING - CHOKING HAZARD! SMALL PARTS! UPDATE There is an updated version of this model: https://www.printables.com/model/1123105-truncated-icosahedron-v20-hoberman-sphere I have wanted a Hoberman sphere since forever. Now, in this…
Print approx. €6.54–€8.00 excl. taxPreliminary estimate for one variant
About I needed to install Athom Power Monitoring Mini Relay for ESPHome, so I quickly designed one. This was designed to be screwed into the wood plank, the distance between the external holes fits into a grid 20x20mm lines, holes for 4mm…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
This is a big modular box for my Eggbot remix: https://www.printables.com/de/model/414264 It is simply plugged into the base body and is exchangeable. It is to be printed on the long small side (see photo, holes open on top) with only…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
When I was looking for a bedside lamp, I came across Immax Atmosphere Lamp ( https://www.immax.eu/immax-neo-lite-smart-atmosphere-lamp-3w-rgb-cct-color-and-white-dimmable-wifi-p13862 ). It suited me with all the parameters: control via…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
I designed a low polygon sphere shell section in order to print (and glue) the largest ball I can produce on my printer. Bear with me, I did not test-print it yet.
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for one variant
This is a small modular box for my Eggbot remix: https://www.printables.com/de/model/414264 It is simply plugged into the base body and is exchangeable. I printed it on the big flat side and added suppot on the T-parts. More modular boxes…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
This is a big modular box for my Eggbot remix: https://www.printables.com/de/model/414264 It is simply plugged into the base body and is exchangeable. It is to be printed on the big flat side with only suppot added on the T-parts. More…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
A custom-designed wall mount for the ESPHome 8266 Temp/Humidity/Light Sensor , providing a secure and neat installation. This mount allows easy access to the sensor while keeping it organized and functional in any room. Designed to be…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Compatible for the southern hemisphere only. For the northern-hemisphere version, check here for the correct parts: Print Friendly Curved Analemma Vertical Plate for 3DMason Heliochronometers by 3DMason | Download free STL model |…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
This 80mm christmas tree ornament sphere has a very nice shape and is easy to print. I recommend to use metallic filament for an even better look as mentioned on the pictures. Available in TWO versions with SLIM & MEDIUM fins. The cap is…
Just a simple sphere for downloading and modifying.
(26-02-2002) Added PLA pin file, they fit a tad better, especially with tape and some scale fiddling, but tend to pop off under use. Do you remember Bakugan? Or those droids from star wars? Inspired by my favorite spinny transformers,…
A little bird. Based on several birb, including robin and tit. This model will be perfect on a shelve. Update : new version V2 with greater definition. I modified the belly and the beak to allow printing without supports. Selling printed…
This 3D-printed fidget model features a sphere inside an octahedron. The sphere has just enough room to move freely inside, allowing you to spin and rotate both the sphere and the octahedron in a few different ways. For the best visual…
BOM: Printed with ROSA3D High Speed PLA Pink This is the third and final variation of my decision dice collection. The Geometry: Unlike the chamfered or filleted cubes, this design is a Truncated Sphere . Imagine a perfect ball with 6…
Credit where credit is due. I made this model based on a short video from MakeBreakRepair 's youtube channel about it. *NOT MY VIDEO* Thought it was a cool neat weekend project. Managed to get it no hardware required by using print in…
Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…
very cool fidget spiral model!!! 👍 Print two of them. to make the model.
XY Size Compensation on the Inner Piece at -0.4mm
This strange rolling riddle will make you think twice about how things roll! In a straight line? No! It rolls in an irregular pattern like pictured below. It gives you the illusion of rolling normally, then it fakes you out! It works best…
This 3D-printed fidget model features a sphere inside another larger windowed sphere. The inner sphere has just enough room to move freely, letting you spin and rotate it within the outer shell in a couple of different ways. For the best…
An elegant plant pot to grow some flower in. No support required. Commercial license Do you want to sell prints of my models? You can purchase commercial licensing by joining the Commercial License in my Patreon .
VERY IMPORTANT NOTE This is not a simple print, assemble and enjoy project. It requires quite some experience, basic knowledge in electronics, a good amount of patience and probably some nerves (it's worth it!). I'll try to give you as…
Fun and simple cat toy. Either the cat can play with it alone or you play with her. (makes even more fun). The toy rolls through its shape very unevenly which stimulates the cat even more to play. Works with my cat really great. The toy…
UPDATE 21/02/2025: Added looser and loosest fitting core pieces, that are easier to assemble the core of the robot, but the parts might fall out easier. This cute little robot is armed and is ready to defend its territory. Its flexible…
This is a WIP of my end effector for a robotic arm that I am building... Since it translates the rotation of three parallel discs into a spherical motion, it is useful for quiet a few joint types. This is by no means a finished design,…
A 3D printable Sphere Planter with a striped texture. Designed to be printed in vase mode. Print time: 3+ hours (100% scale) Dimensions: 14 x 10 cm (diameter x height) V2 high resolution model for vase mode and it includes a shelled…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Bring back the magic of movie night — without the rewinding. This NFC-powered media player uses 3D-printed cartridges and ESPHome to trigger movies, playlists, or automations in Home Assistant. Just insert a cartridge, and your smart home…
I use this for making obstacle course for Sphero droids, but it will be great for any RC toy like cars for your kids! Size Base 45mm x 45mm Hight 57mm Wall thickness 1.2mm Main features Stackable - for easy storage Fusion360 file included…
Need a basic cube but don't feel like installing 3D software or firing it up to make one? Here you go. This is a small pack of 6 primitive shapes for whatever you may need them for. Whether it be test cubes, or stretching the cylinder…
A decorative hanging bird feeder designed for gardens, patios, pergolas and gazebos. The spherical feeder features a large opening for easy access to bird seed and a convenient hanging point at the top. Its rounded shape gives it a…
Hatshepsut Sphinx at The Metropolitan Museum of Art
Through Rhinoceros I designed an empty cube that contains a sphere inside. For the sphere, I decide to use the Meshmixer program where I edit it and apply a Voronoi pattern. To know how to use the Meshmixer and how to apply different…
An ideal present for every women who do makeup and would like to keep all the cosmetics and utensils organized in a nice looking box. Size: ~180 x ~100 x ~80 mm Check out also my other design of makeup organizers:…
This is a cat toy in the form of a veronoi sphere
I like the reduced design language of this bowl. Mostly simple geometries like circles are used to build this bowl. Prints without support. Best results with the following params: Matte PLA Fuzzy Skin (0.5mm point distance, 0.1mm fuzzy…
IMPORTANT: Set minimum feature size to 120% or disable thin wall printing for this model. I like to print this model with 0 top walls or bottom walls and an 10% to 20% infill pattern. You have to print the model twice to assemble the…
I designed this version of a Vortex Fidget Toy to have something other than the taper shaped ones. Printed with 0.4 - 0.2 layer, I used support on buildplate for part 1. Scaling up will also enlarge clearance. (base model has clearance of…
NOTE: This kit card was prototyped and designed for Bambu Lab printers using Bambu Studio. As such, I don't know how it'll print with other printers. My .3mfs can also be opened by OrcaSlicer and you'll find size variations in there.…
Three textured spheres to make various pattern in zen garden sand. Printing 0.2 mm layer height Support grid, on bed only, 2 layer raft Bellow examples of my supports for each ball
Easy to print roller for forming perfectly round pearls for making jewelry, decorations or for children. Ideally suited for use with polymer clay. But also suitable for fondant or children's modeling clay. In 100% size, the Spheres are…
LIMITED OFFER! one month free Patreon support tier https://www.patreon.com/OTL3DPrinting/redeem/1A42E Dive into a world of endless fun with this brilliantly crafted 3D printed puzzle ball! At a perfect 3 inches in diameter, this…
I wanted to see if I could print a spherical bearing. Print slowly, and without any supports in the track areas. I was able to add an little support just under the bearing spheres using a slicer that enabled customizable supports. I…
Update: Added .step and fusion360 source files I plan to use this automated iris remix for my prusa enclosure and later to control my air exhaust system from the printers and laser cutter. Using a 24 teeth spur gear instead of th 12…
For more info about this project, please have a look at my blog post .
I made this Armillary as a git for my Godson who is really into Astronomy (planets and stars and such things). There are several fine examples out there, just wanted to make my own. This Armillary includes Lunar Sol transits (purely…
This an abstract model of a mesh sphere designed by myself in Shapr3D. Looks good in transparent resin. Great way of demonstrating the capabilities of a resin printer. It is designed primarily to be printed on a resin (SLA) printer. Best…
This is my first model and it worked out quite nicely. The candle will have 76mm diameter. You will need 4 bolts, atleast 100mm long. I am using 10mm bolds 100mm long. UPDATE: Apparently just strong rubber bands are enough. I printed it…
This is a remix of Frank Deschner's twist-lock base for the 8-inch moon lamp. The remix allows the use of desk lamp bases with socket diameters of about 36 millimeters and about 28 millimeters. The moon globe itself is unchanged. I have…
This expandable fidget sphere features a scale-like surface inspired by dragon armor textures. The design is fully round rather than egg-shaped, giving it a compact and balanced form while maintaining the layered, scaly appearance. Its…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
A model of SpaceX's Raptor atmospheric engine for the Starship rocket system. I designed the engine for a 1:48 scale SLA print for my own Starship SN15 model, which I still can't get to due to time constraints. I modified the model for…
Recommended print settings: Material: PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. As seen on Jelle Romers video: And article:…
The sphinx is a mystical beast said to test travelers with tough questions and if they make a mistake- *poof* Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I loved TheSheDM's design from the start, however I don't play D&D in US-english. To not get confused with ft units, I've converted them for metric ones. Per each spell area there are 3 model variants: - suffixed with '_A' - the most…
Left and right hemispheres of the brain of Rajat Jain (25) obtained with an MRI scan and used in UCSF's and UCSD's glassbrain project. I got the 3d files from the National Institutes of Health 3D Print Exchange web site. There are two STL…
Es handelt sich hierbei um einen Gürtelhalter für digitale Meldeempfanger vom Typ Swissphone X15 oder X35. Dazu gehört noch der Metallclip zum einkleben. Die Passung ist so gut das einkleben aber nicht nötig ist. Es hält auch ohne sehr…
Beide Teile sind in einer 3MF Datei. 2 Versionen: Eine komplett geschlossene sowie eine Version mit Löchern zum durchfädeln eines Bandes zum umhängen. Die Kugel wurde für ein Köstum als Froschkönig konstruiert. Both parts are in one 3MF…
This is my first submission to Printables. Happy Holidays!
Leela is a 3D printable sensor housing intended to be used with Home Assistant and ESPHome. She can be described as a "room sensor" with the primary sensors being motion, temperature and humidity. The data from these sensors can be very…
This small spherical container is constructed from two halves that seamlessly join together using a threaded mechanism. It features an outer diameter of 40 mm, an inner diameter of 30 mm, and an opening diameter of 24 mm due to the…
![NOCTURNAL - Use the Stars to tell the Time [improved version]-Northern Hemisphere](https://media.printables.com/media/prints/30ed281a-fc59-41f5-941b-425939d7672f/images/14344635_98df65b0-563e-47ab-a127-7df30a626259_be133c21-723d-42fd-a157-82680e392fe7/figure-4.jpg)
