739 models
!!Important!! I highly recommend straightening the Z-Axis gantry before doing this mod, as explained here . The Ender 3 V3 SE/KE faces a significant issue with a wobbling frame, which can result in serious quality problems, especially at…
This is my version of a Z-axis stabilizer support for the top of the Z-rod. This version uses a 608RS bearing which fits snugly. I am using 2 t-nuts and M4x12 hex head screws to attach to the Ender 3 top 2020 extrusion rail. Print…
Elegoo neptune 4 z-axis stabilizer was made from the front part. This time it is connected both ways.
USB cables are very loose going into the Sonic Pad. This allows the USB connector to move around. When this happens on mine, it looses communications from my Sonic Pad to my CR6-SE printer. When this occurs, most of the time, I have to…
Lets you fully secure the motherboard fan in the Flashforge Adventurer 5M so it won't make unnecessary noise.
NOTE: Please honor and adhere to the license of these models. Commercial use is prohibited and not allowed. Three router attachments for Dremel rotary tool, with different stabilizer bases. These models were inspired by the design on…
As the USB connector on my Sonic Pad always moves a bit downwards, I decided to create this extension. It clips onto the pad (as well as possible with the low profile of the Sonic Pad): The hole for the USB connector is made for this…
Does your printer make funny noises when the Z axis is moving? Well, just print this and attach it, all noise gone. Recommended material: PETG After installation disable motors (Control→Disable motors) and check both axis can spin without…
Fits a 8x16x5mm Bearing which snaps in Need : 2 - M3x10mm Screws Printed in PLA .2/.4
This is adjustable stabilizer for the top end of the Z axis lead screw on Ender 3/pro/… ! Before you install it make sure you have properly aligned your Z axis stepper or you will probably just make more trouble installing this…
This is a v2 of my original Milwaukee M12/M18 Charger Wall Mount. This version offers stability for the charger to rest on to avoid wobbliness when charging your batteries. I've added side stabilizers following the overall shape of the…
This is a remix of a brace I printed a while ago. I cant find the original model any more, but these are much longer. The ender 5 needs brace supports for the Y axis, but the belt tracks in the bottom groove on the Y axis where the tee…
Remix of https://www.thingiverse.com/thing:5606999 with "build in" bearing using 6mm BBs , adapted for Ender 3 v2 Neo. This can be printed in one go. Print Settings Printer Brand: Creality Printer: Ender 3 v2 Neo Rafts: No Supports: No…
UPDATE V2: Added space on the side of the model to make installation and removal easier. I wanted to print an Ender 3 Z-Axis Stabilizer but I did not have the screws for it and I didn't want to go buy them so I remixed it and gave it an…
None of the existing z-axis stabilizers for the Ender 3 V2 fit correctly or used M5 bolts with drop-in t-nuts to attach so I created my own. You'll need (2) M5 x 8mm bolts and t-nuts and a 8mm x 22mm x 7mm ball bearing . The bearing is…
Laser Engraver Rotary Riser/Stabilizer 2 Options Available: (3D Printed or Laser Cut) 3D Printed Version: Printed in PLA+ I used a .6mm Nozzle, however you can use a .4mm as well With a .6mm Nozzle 2 Outer Walls. With a .4mm Nozzle 3…
Update 27th of March I've replaced the click connector with a nut which can be screwed on the base stabilizer to close the loop. Another remix for the motorized lift v4 which fits to motor base > v105. It will only fit on the new base…
You can buy me a coffee if you like. https://ko-fi.com/budos
This remix combines the 2020 Snap On Filament Guide - Ender 3 / CR-10 by keithcorcoran and the Ender 3 - Z-Axis Bearing Stabilizer by benawhite . It is to be used with the CR-10 Bigger Z-Axis Manual Adjustment Knob (also Ender 3, CR-10…
The Falcon2 Pro laser cutter & engraver is a great machine. But they really botched the bed of the machine – the slats are a horrible, wobbly mess! So any engraving with fast Y-movement will jiggle the workpiece. Especially bad if the…
I can't say if these blocks actually help keep the Z gantry at 90 degrees, but I made them anyway. The blocks are the same so you can download 1 and mirror the other, or download both left and right model. I also made new slot covers and…
This works with the official Anti-Vibration Feet to help stabilize the printer. I found with just the official feet the printer was really wobbly. Sometimes the feet would fold over. I printed my set with tpu with 1 layer outside and 10%…
Floating Benchy Stabilizer 🚤💦 Kennst du das Problem? Der klassische 3DBenchy kippt im Wasser schnell um oder liegt instabil an der Oberfläche. Mit dieser Stabilisationsflosse wird dein Benchy deutlich stabiler und kann auf dem Wasser…
This is a z-axis stabilizer, designed to work with the bearings found in the fidget spinners you no longer use... 22mm x 8mm x 7mm I basically needed this to provide support for the Z-Axis Manual Adjustment Knob I added. Enjoy Updates v3…
There are many similar projects, but in my case I wanted to be able to fix it to the vertical upright, to be sure that the screw remained perfectly vertical. The inside diameter of a 608-rs ball bearing is perfect. It is fixed with two…
These simple brackets allow side rails to be screwed down in a permanent position. Printed with PLA, I used 50% infill for addition strength. I just glued to side rails. but they could be bolted to rails. I added four, one in each corner.
I designed it like this because i wanted to use filament guide that you can see in the photo.
Designed for my dimensions… Better check your distance and curvature of threaded rob Check my TikTok <3 https://www.tiktok.com/@kolanoooxyz/video/7209275644008566022
*This is not a guarantee—use at your own risk! This can holder is perfect for setting drinks down on soft surfaces like couches and mattresses, or just on your desk. I've used one on my couch, with a cat every day for over a year and…
Tired of struggling with seatbelt buckles that lay flat or disappear into the seat? This minimalist, high-efficiency stabilizer is specifically designed for rear car seats where buckles tend to flop over, making it difficult for…
This is a replacement for the Z axis stabilizer on Kingroon's KP3S pro V2, designed to remove the spool holder from the structure, to keep the external size the same as the KP3S pro (v1). See the assembly on the video below.…
Didn't want to give up my handle just to install a Z-Axis stabilizer, so I mixed them.
Material´s List: 4 uds -- Screw DIN912 M3x25 4 uds -- Nuts M3 4 uds -- Screw DIN912 M3x12 12 uds -- Screw DIN912 M3x10 16 uds -- T-Nuts 20-M3 2 uds -- Aluminium Tube outside diameter 12mm or 16mm L=620mm
After weeks of random jamming and proding my printer, I couldn't find anything wrong. Then one day I noticed that the green plug was loose, almost completely unplugged. I did some testing and found that if you pull straight on the clip it…
THE IMPROVED V2 FILES ARE RECOMMENDED. Installation is easier and the connectors are more robust. You may need to tweak some print settings and reprint the models to ensure everything fits well, but at a gram of filament and 3 minutes of…
Loved the original frame braces but wanted to keep the two magnets for the door. I also rounded some of the pointy bits to make it easier to print
This mount attaches to the USB C connector of a Dell docking station. It keeps the connector a specific height which relieve stress on laptop USB C port caused by bending of the connector. This is designed for Dell WD19 docking station.…
You will need to print 6 spheres and the other file, then insert the spheres inside the bearing and it will adjust itself so that it can't come apart
Update 7.02.2023: Added Pre-Build Bridges and a Hexgon Plate. You can extend them with any other element using the top/bottom clips. This spacer (grid)element has several advantages. The Hexagon connector is very tight and holds firmly on…
This is a simple bar to support the left side of the LCD panel since I didn't like how it was just floating. It also has holes to allow you to replace the M3 screws with longer screws if you want, but I found it actually snaps into place…
This a replacement Part for the Razer Huntsman Tournament Edition, specifically for the Spacebar Key. It will probably work for other Razer/Huntsman Models. As I broke my stabilizers under the Keycap of my Spacebar I tried DemuxLabs File,…
You need: M8 threaded rod 53mm x2 M8 nut x16 M8 washer x8 M5x40 alled head screw x4 M5 washer x8 M5x25 allen head screw x4 M8 and M5 drill bit
Filament guide with a roller to avoid the filament from touching the z-axis or worst. Super easy assembly. This design is entirely based on the excellent filament guide of Tomaskom_cz , but I changed the attachment since it did not fit my…
V3 - Larger fins for structural strength and stabilization Outer Diameter 23 mm Recommend cutting the model in half about 3/4 up with Prusa Slicer and having denser infill at the top (100%) compared to the bottom (50%-80% Grid). Print…
Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System mounted to standard sized painting poles - PET bottle as counterweight This is my mostly 3d printed stabilizer system. You can use it with cameras or cellphone…
Inspired by Djngnear's tabletop tray, I remixed mikeev's mount for the Sunlu S2 to entirely remove the screw holes (with no internal bits left over) and cut it down to fit on a Prusa Mini/+ bed. I also cut the power cord hole to be open…
The PTFE tubes coming out of the Elegoo CANVAS are short and unsupported. When you push a PTFE coupler onto them to extend the line out to a filament dryer, the tubes bend under the side load of the coupler and the extension hose. I…
UPDATED: better model step file included 2 size variations Just a quick design for the sometimes wobbly legs on "Lack" tables. Might well fit on other "squarelegged" tables Can be printed easily - max overhang is 45° - printed at 0.2mm in…
Material list: 2 units -- Screw DIN912 M3x16 4 units -- Screw DIN912 M3x12 4 units -- T-Nuts 20-M3
UPDATE: Guys, please don't bother with these. I've spent a long time testing them and can confidently say they make absolutely no difference. The 3V3 frame is quite strong. It MIGHT be useful if you have a very wobbly setup or other…
Update: Adding a new base with large opening (from 40mm to 45 mm) for thicker bench top. The v-grove is removed in this base. Introduction: This is a versatile hand stabilizer that could be used in any shop that requires precise…
With the Bowden tube exiting vertically out the extruder on the Ender 7, there's some risk for the tube to get bent or kinked, so this simple strain relief / stabilizer is easy to attach (no need to remove the Bowden tube) and does the…
Printer modification, Z axis stabilizer for the Anycubic Kobra 2 Neo printer. Bearing used: 608ZZ, outer diameter: 22mm Support my work, buy me a coffee: https://buymeacoffee.com/dawidblaszczyk
Stabilizer for Vinyl Records. It uses up to 50 2 Cent coins and a M3x10 Screw to keep the parts together, alternatively it can be glued together.
Z axis stabilizer for Biqu B1. It may also work with other models or brands. You´ll need a 608 bearing. There will be necessary two m3 screws and two t-nuts as well. The plug fits a standard 2020 extruded aluminum, for more stability.…
About I noticed the screw wobbles alot and thats why sometimes my nozzle scratches the bed. Then i designed this and it already improves it alot. In other words: It stabilizes the Z-Endstop-Screw so the Z-Axis does not tend to stop lower…
I was having some problems with my X axis sagging on the side that had no Z screw, so I purchased a dual Z axis kit and printed the parts to stabilize and synchronize the two Z axes. The slot for the ball bearing is an elliptical shape,…
I haven't done much printing, but I found that neither of my printers care for having the timing belt system going. They were both printing like crap, so for an acid test I took this off both any they started printing great again. So at…
I was not satisfied with the stability and solidity of the attachment of the Primer feed body Stabilizer so I design a clamp. First model is only compatible with 550C frame so I design a second version to fit with 550B frame
A simple endcap to screw on stabilizer end, to add protection and a bit of color. Two version are provided, to fit ¼" and 5/16" screws found on most weights. For improved durability (weak point is the thread) I suggest printing this model…
I create a Z-Cover that has max Stiffness and perfectly distances the Front to Back part
Thanks to a good suggestion from JumpingJack256, this part has come to life. He asked if there could be a stabilization part that uses parts from an existing gravitrax track. For example by connecting to a transparent plateau. It is now…
Updated 12/23/23: Made the front hole for 8mm screw slightly smaller and added chamfer for ease of starting the fastener. Also made both halves identical. The head of the m3 button head will fit in the hex hole so now there is only a…
This model is free. If you appreciate this model, please leave a download and a like! A simple ring for pan tilt sets from China. The ring supports the servo. This enables stacking multiple sets into a robot arm or lifting bigger sensors.…
A stabilizing leg for the 2kg MK4 spool holder.
2020 Leveler Pads for Aluminum Extrusions - Stabilizer - with M6 Threaded Leveling Mounts Overall dimensions: 85x20x18mm double 50x20x18mm single Suitable for:…
I have found that the USB-C connector on my Ender 3 S1 is very loose, no matter what cable I put into it. This insert slides right into the cutout area, where the cable and SD cards are plugged in. While it does not remove ALL extra play…
Original design was great but a little too much, reduced materials for efficiencies, also allows for printing on a MK4/3 without print modifications.
Remix of the Leaf Ring by @tlkinn025_230674 wich was for TPU print. I wanted to print the ring in PLA but the design is to fragile for it. So I stabilized the ring a little bit… Edit: Added a V2 that is even more stable if your printer…
Estabilizador de cañón para guardamanos tipo Daniel Defense. Valido únicamente para Airsoft. Es posible que requiera pequeños ajustes dependiendo del fabricante. Probado en guardamanos Madbull. Esta pensado para sujetarse al cañón…
Stabilizes the wobbly filament roll holder from Artillery. Print and clamp in between when the original filament holder is installed on the printer. If you like to replace the spool holder completely, see my newer design…
Rear PTFE Tube Stabilizer This model correct the adjustment of the PTFE tube angle as it exits the AMS via the rubber passthrough. It aims to minimize bending and friction of the filament in the PTFE Tube, consequently aiding in the…
Spacers that drop in or glue in to the top of the drawer system to prevent other Tough System pieces on top from rocking back and forth. Recommend at least 3 walls, 3 or more top & bottom layers and at least a 50% infill. Wouldn't hurt to…
I was bored and found quite a nice model of the Ender 3 V2 printer. From there I based all my upgrades and add-ons The design has two versions: Base V-slot version that slides into place Added tab for T-nut to be used for locking in place
This device was created for anyone who has difficulty eating due to shaking or tremors. I have to link the STL and Solidworks files in the download of this file, so if anyone needs to alter the design, feel free. The utensil part of this…
My point of view on the model “ Anycubic Kobra Z Axis Stabilizer ” by Wavz3D A little bit more reinforced (to avoid crashes in the screw hole) Axis Stabilizer that supports 8x22x7 bearing with opportunity to make your own name tag I…
This is a design I whipped up to provide stabilization for the BNC connector on an IC-705. It utilizes the ground lug and the little handle thing on the back to provide 2 points of solid connection. Print instructions I printed this with…
Kingroon KP3s Pro - Z Stabilizer Bracket to stabilize and stiffen the Z axis of our Kingroon KP3S Pro and Pro S1. It is a very simple design to print and install. I have removed the two screws from the access cover and the axis remains…
Prints without support in under 10 minutes. You can attach florist wire to it to stabilize your plant.
As I am switching to sidemount diving (from twin backmounted doubles), I now have the old problem of cylinders sliding around in the trunk of the car. I want to protect the cylinders, and my car, and I wanted something that would…
Description: Introducing the Ender 6 Z Rod Stabilizer, a meticulously designed and proven 3D-printed part engineered to enhance the stability and precision of your Ender 6 3D printer's Z-axis movements. Crafted to meet the highest…
stabilizátor osy Z pro Two Trees Bluer Verze bez pomocí šroubů a na dvě ložiska, bohatě stačí použít jen jedno (608) Tisk PLA
This is a replacement for the feather clips for mechanical keyboards. It is modelled after the ones found in the Razer Blackwidow X Chroma but it should fit most standard keycaps. Print Settings Printer Brand: Prusa Printer: Mini+…
Broom reinforcement brackets to stabilize the broom against lateral forces Improves overall stiffness of the broom Better durability for heavy duty work Hexagon style cut out Suits 20° angled broom handles, e.g. available here 5 common…
BambuLab A1 Stabilizer - Stabilizzatore per Bambulab A1 Developed to prevent the annoying wobbling motion of the printer Optimized profile for better resistance and ease of printing Optimized filament usage If you download/enjoyed this…
Put under the knife fully closed, then screw the top portion out until it barely touches your knife, a rubber stop is optional. PS: the “mini knife holder” can be used for chefs knives as well, the advantage being that you can draw out…
Stabilizing the axis results in more uniform coffee grinding and a significant reduction in resistance, i.e. easier coffee grinding. The printed part needs to be supplemented with one Ball Bearing 626 ZZ (d=6 mm, D=19 mm, B=6 mm).…
Adjust horizontal expansion for perfect coins adjustment. Using gcode or 3mf for the cover, the first colour inserted in the extruder, will be the main colour of the cover.
A little prusamet stabilized spool 0.15 PLA cube 5x5x5mm Magnet or 8mm cylindrical magnet the colors obviously had to be the iconic ones but obviously the internal coil must be printed with the material that best matches the mood of the…
for smaller tape rolls as original intended and as stabilization because original model can break easily while using. I added the freecad file so you can modify it. Instructions print original model print this model put a roll of tape in…
This is a small part that sits between your bicycle rim and the valve stem ring. The main goals of this part are to prevent the valve stem ring from scratching the rim, and prevent the valve stem ring from vibrating and making noise.…
needed: 6x M3x10 screws; 3x M4x15 screws; 3x M4 nuts 6x 2020 m3 tnuts (you can print them and incorporate 6x M3 nuts) watch my profile to find them!!! print with a rigid material
This is a base/holder for the Mega Globe MK2 sold by Sneaky Pete I made this as one piece but it required a lot of supports. So I made it modular. I printed everything with a .4 nozzle at .2 layer height with 20% infill. I press fit the…
Have you ever had this happen to you? You're eating pizza while watching tv and you want to change the channel or pause your show but your hands are all a mess or greasy. You try to push the roku button with one finger but since its got a…
It spreads the tension of big/heavy antennas (W100RX2 added since its a great antenna and i have it now) away from the SMA onto the case. I got inspired by https://www.reddit.com/r/hackrf/comments/1l9c72m/hackrf_h4m_antenna_mod/ .
in my opinion it even feels and sounds nicer than the original razer one ;)
Fits a 8x16x5mm Bearing which snaps in. Das 8x16x5mm Kugellager passt perfekt. Ich benutze - I used: 2 mal M3x16mm Screws (Theoretical could a maximum of M3x20mm fit - M3x20 könnte maximal passen) Ich habe die zwei Arme für die Schrauben…
AquaStar - Pool Umbrella Stabilizer Sleeve Reducer Adapter Basketball The standard AquaStar 5" SMUSxxx umbrella stand sleeve fits a pole diameter of 1.675”. I made an adapter reducing the hole size to 1.5”, plus a little 1.0mm wiggle…
I was getting tired of the bowden tube working itslef loose from the hot end on my Creality CR10S Pro so I designed this stabilizer that snaps into place without any need for screws. Note that i made a slot to push a zip-tie thru to…
