133 models
A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…
***BENDER2 WITH HELTEC V4 SUPPORT, GPS SUPPORT AND 4x 18650 BATTERY SUPPORT IS AVAILABLE FROM MY WEBSITE HERE *** Bender is a 3D printable case for the Heltec V3 and Heltec T114 LoRA Meshtastic powered Radio node. It features a bay for an…
Commercial Use and Attribution Notice: Alley Chat HT114 Pocket Pro © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
***NIBBLER2 WITH HELTEC V4 SUPPORT AND A POWER SWTICH IS AVAILABLE FROM MY WEBSITE HERE *** Say hello to Nibbler, the tiny HeltecV3 or Heltec T114 “pocket” Meshtastic powered node. THESE PRINT FILES INCLUDE BOTH VARIANTS OF NIBBLER,…
Commercial Use and Attribution Notice: Alley Chat HT114 Slim Pro © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…
Commercial Use and Attribution Notice: Alley Chat HT114 Slim Pro © 2024 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other…
Made the bottom case a bit bigger to accommodate an 2000mAh battery and widened the screw hole to allow for a threaded insert and changed the front and buttons to allow for the insertion of the Heltec T114 with its protective plastic…
Commercial Use and Attribution Notice: Alley Chat HT114 Pocket © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses…
18/09/2025: I have some of these complete and ready to go on eBay if anyone is interested: eBay Listing Update 18/08/2025: Made some slight changes to the front case, giving the battery pack a little more room, approximately 1.5mm of…
I based it on the style of the holsters for my Alley Chat HT Pocket, and I think it goes really well with the H2T design. Baofeng Belt Clip Generic Belt Clip Heat Set Inserts This is a new work completely owned by myself, but I am…
Simple mobile/pocket enclosure for a Heltec T114 board with an 18650 battery. Most models place the battery behind the board, resulting in a bulky enclosure. This is about as compact as possible. Assembles with eight M3 heatset inserts…
This is a case for the Heltec T114 v2 with MakerFocus 3000mAh battery. Designed for the use as a Meshtastic or Meshcore node. Before you start: This model has very small tolerances - Accurate printing required. If you are unsure, scale it…
This is a case that fits a Heltec T114, a GPS module, a buzzer, a button, and a battery so you can take your Meshtastic node with you everywhere. The buzzer is connected to GND and pin 08. It's used to get a beep every time you get a new…
I wanted a Heltec T114 V2 meshtastic radio case that would fit with the GPS module. I didn't see any. I also wanted one that would hold two of the larger 3000mAh Lipo batteries. I made it to snap together so no hardware would be required.…
For those who want to just buy one ready to go here's my stores. Link bellow. <<Harutech Shop Here>> Buy Full Assembled here <<Etsy Shop Here>> <<Tindie Shop Here>> This is a case designed to build a standalone Meshtastic communicator…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
I remixed this remix to support the MakerHawk 2200mAh LiPo battery (aff link). The original and the remix before this was just slightly too small to hold my battery. Grab the button STL from the original model.
This is for the first version of the T114, the one with problems. I haven't received my v2 yet to see how they compare physically. ------------------------- This is a pretty accurate version of the Heltec T114 plus screen. One side of the…
Remixed case with additional room for MakerHawk 3.7V 2200mAh LiPo Battery . Pick up the battery and the Heltec Mesh Node T114 (Rev. 2.0) and you’re good to go.
I bought a amazon kit - Mesh Node T114 with screen protector & GPS-Modul & 950mAh Akku, nRF52840 MCU SX1262 LoRa-Chip https://www.amazon.de/dp/B0F65D568Z (non referal) I modified the muzi.work H2T Remix case by NextGen, so that a Heltec…
Remixed from Beta-1 Warning - only cosmetic changes were made, however I can't guarantee that everything will fit until my T114 order arrives; but in the meantime I thought I would “slim-down” the almighty Muzi design - all credits to the…
New version of this here: https://www.printables.com/model/1017019-nexgen3d-meshtastic-atak-heltec-t114-case-v2 Note: I have ordered in some Beofeng clips, so when they arrive I will redesign the back cover to support them, so if your…
This is a case for the Heltec T114 V2 for you to dangle on a bag, backpack, or set of keys as a neat “charm”. It includes space for a GPS module, as well as a RAK PCB antenna or OEM coil antenna. Materials Required Heltec T114 V2 nEF52840…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
A compact LoRa SolarNode case that is suitable as MeshCore/Meshtastic® repeater. It offers enough space for up to 4x 18650 cells. 🛠 WORK IN PROGRESS: This project is still work in progress. Some dimensions still might change in next…
Battery up to 10mm x 36mm x 65mm
This is for mounting a HELTEC T114 in an enclosure. I designed the holes to be used with two M2x6mm screws/bolts. I used nylon M2x6mm bolts cause that's what I had. BE CAREFUL NOT TO OVER-TIGHTEN AND STRIP THE THREADS! Heltec T114:…
Mounting Plate for Heltec T114 LoRa Board (without display)
Really like the original design by Alley Cat What I was missing - it's the heartbeat LED. Also, for my taste, USR button (bigger one) was too flush with case, so it was a little hard to press. Added a Little tactile bump on it. I added a…
While looking at designs for solar powered Meshtastic nodes, I came across a few builds using the Harbor Breeze 60LM Solar Flood Light. Since I didn’t need to keep the light, and wanted more flexible mounting options, I designed a…
Wanted to add two Heltec LoRa v3 to a KEEPTEEN D5 Lora Solar enclosure. Also made a T114 version as I heard the Heltec LoRa v3 is too inefficient for such purpose. Would like to add support for other models so do give me your values as…
Heltec fixed the “long message” and “Bluetooth disconnect” problem with a new hardware Revision, make sure that you order the updated version to avoid problems!…
This is a case to enclose a Heltec T114 with a screen, plus a 2200 mAh battery. It is secured with a screw. All parts are available on muzi.works Heltec T114 w/ display: https://muzi.works/products/heltec-mesh-node-t114 Battery:…
Just an attempt at a sleek-designed case that protects your hardware from falls. Supports up to a 2000mAh battery. This case is engineered to accommodate multiple antenna configurations, including an internal RAK PCB antenna, Heltec coil…
I wanted to put a Meshtastic node on my car so I can get better reception when ‘wardriving’ so I designed this one that sticks on using 4 magnets. You can fit pretty much any hardware inside, but it has provisions for a Heltec T114 LoRA…
The Heltec T114 has both a battery input and a solar input: Purchase list: Solar Panel: https://www.digikey.com/en/products/detail/anysolar-ltd/KXOB101K08TF-TR/13999136 Connector: https://www.amazon.com/dp/B07FP2FCYC Some Kapton Tape…
This is a case for the Heltec T114 V2 for you to wear as a watch. It works great with the upcoming 2.7 firmware that gives you a watchface. Materials Required Heltec T114 V2 nEF52840 ( Amazon - affiliate link ) 1x 502030 LiPo Battery 3.7v…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Modified base file to be 6mm wider to better fit heat set inserts. Stretched base case to allow for longer 18650's with bms pcb's on top. Widened internal structure to allow GPS usage. STEP files included for further modifications.
Need: 1. Gps module 2. DC tumbler 3. Helltec T114 4. 18650 holder 5. Pigtail SMA female - U.FL (IPX) 6. M3x16 DIN 912 7. Heat incert M3
Exact battery that fits is 3.7V 3000mAh 103665 , link https://www.aliexpress.com/item/1005005031129301.html The switch is SS12D00, link https://www.aliexpress.com/item/1005005633418066.html I used 4 screws M2.5 x 6mm (it can fit up to…
I'm a very minimal kinda guy so I just wanted a clean case without brandingI'm a very minimal kinda guy so I just wanted a clean case without branding
Only compatible with Heltec T114 V2 without display and GPS. Compatible with 18650 battery, space for MPPT for battery protection. Printing the outer shell might be tricky but the idea is to use a nozzle with dia of 1.2mm, vase mode,…
Compact case for DIY Meshtastic pocket node. Note that used antenna and compact size means more limited range! Best for highly covered area. Dimensions: Length - 56 mm Width - 28 mm Height - 21.5 mm Used components: Heltec T114 v2 (…
Heltec Lora T114 mit 3000 mAh Akku. Genug Platz für breite Schraubantennen. 3000 mAh Li-Akku3000 mAh Li-Akku: https://www.amazon.de/dp/B0F1FHHH5Xhttps://www.amazon.de/dp/B0F1FHHH5X Senkschraube M2,5 x 8 mmSenkschraube M2,5 x 8 mm:…
This is a mounting plate for a dipole antenna. this design is sized for an FT114 toroid. it uses M4 screws and a BNC chassis mount connector. zip ties are used to hold the toroid in place. the BNC cutout is sized for a BNC bulkhead…
This is a simplified 3D model of the Heltec T114 module. It is designed to be used as a reference when creating custom enclosures or for placement in larger projects. The model captures the essential dimensions and shape while keeping the…
This is a custom, snap-fit enclosure designed specifically for the Heltec T114 LoRa development board . It is engineered for long field deployment and durability, with easy access to all controls. The case is designed to house a large…
This case is designed for a Heltec T114 v2, and packs a battery life punch fitting a 21700 cylindrical cell battery, and a 60x30mm 5V solar cell. It can accommodate the optional GPS module, and a walkie-talkie/Baofeng style belt clip can…
Added a small loop to my favourite Heltec T114 case, so it's easy to attach it to something using a rope.
Minimalistic T114 Case for a 18650 using metal contacts (AA) -T114 board no GPS no screen -2 AA battery contacts -the included pigtail antenna -the included battery wire its pretty much it. just press fit the board inside while slipping…
This is a remix of the Heltec T114 Case (w/ 103450 Battery and Power Switch) by @AndreyLifar_2081652 The original design has been modified to accommodate a GPS module. The resulting model includes the following changes: GPS Compartment:…
New version of this here: https://www.printables.com/model/1017019-nexgen3d-meshtastic-atak-heltec-t114-case-v2 I made this magnetic dock to suit this case:…
Remix of original model to add an external antenna and 14500 battery.
This case is for sale on Etsy, enjoy but dont sell. Meshtastic Heltec T114 GPS node case holds 3000mah batt and GPS. Chip friction fit in case use 2 3mx4mm screws to secure case buttons print in TPU.
Enclosure for the Heltec T114 with a 2000 mAh battery. The back wall includes space for two neodymium magnets. There is also a dedicated compartment for the GPS module. Printed in both ABS and PET. The electronics fit securely and are…
(See original source model for printing instructions.)
Want to Support me? Post a Make Give it a Like PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- About: Remix of the original Heltec T114 + GPS + Li-Po case, reworked to fit the Meshnology 3.7V…
Remix of Murder Hornet's design for the screenless variant and with buttons omitted
Just the body and the Encoder cap. I also threw in a Logo front plate. Front plate was printed with 0.2 nozzle to come out nice. Get the rest of the parts from the original. Update: I managed to damage the USB port on my t114 so I made a…
The original model had two detached parts. I imported them to OnShape and translated 0.01 mm to join the parts together.
I wanted something that I could just slip into my pocket for a daily carry that would last a week on battery. Design Criteria include: Smallest possible Design 3000mAh Battery Internal Antenna Smooth Exterior No Bolts, Screws, Inserts…
Minimalist no logo version of the Heltec T114 custom/bigger H2T case
Heltec v2 T114 Mesh Node Meshtastic Case with GPS and SPA antenna support Hardware: 4x M2 20mm screws Material: PETG
The Austec is a case for the Heltec T114 designed with help from Austin Mesh members. It can take the Gizont or GT-800 antenna and fits a 103450 (or similar sized) LiPo cell battery. See the article that pairs with this case at…
A slim node that happily lives in your pocket! I've been personally using this design for 6 months and its my favorite so far. Easily lasts a week on a 2000mah battery. Print faces down, some sanding/filing may be required but its a super…
I didnt have a fitting battery for the slim cases so i made it thick enough to fit two 18650s. Also edited the molle clip. Use the original front
Battery up to 10mm x 34mm x 50mm
Version of the extended front cover with a cutout to accommodate thicker USB-C cables. I included the FreeCAD file too. Just edit the sketch in FreeCAD and export the new STL if you would like to reposition or resize the notch. It might…
We will also be selling full cases with holders on our website purgesafetech.com or on our Etsy page Purge Safe Tech!!! Coming soon. PRINT IS PETG-CF if possible. Mix and match colors are you'd like! We print these on out FlashForge M5…
A little desktop stand for the popular H2T case by muzi.works for the Heltect T114. I printed it with 3 walls and 5% infill using PETG.
Alley Cat mod t114 help to finish it need to make fatter back part to fit 083160 battery and to ad solar panel window
This is a back housing that re-uses the gasket, screws, battery terminals, and battery from the Harbor Breeze 60 lumen yard light from Lowes Home Improvement. It's around 10 dollars. comes with a 1500mah 18650. you can use whatever button…
This is a minimal case for the Heltec T114, intended to use the stock “black spring” IPEX antenna: https://heltec.org/project/mesh-node-t114/ It is intended to fit a vibrate motor and a 10mm speaker - however I was deeply un-impressed…
This is a simple enclosure to hold an RF choke or balun based upon a Fair-Rite FT114-31 toroid 2631801202. Note that FT114-31 toroids have the same diameter as a FT114-43 or FT114-61 toroid, but the height is larger at 13.85mm (the…
Device case for the Meshtastic or Meshcore node using the Heltec T114 module with a 18650 battery. The case parts are fastened with DIN7981 2.2x6.5 self-tapping screws. It is recommended to print a transparent filament to indicate the…
Replacement part for telescope eye piece, the one silver part in the picture i uploaded, dont have the telescope model since it was to fix one for someone but did not have the whole telescope, will add it if i can get the info later.…
Left cap with a recess for a standard length Type-C plug.
I wanted a MagSafe node to make sure I don't lose my node when I'm out and about. It's a bit chunky and I designed it for my iPhone 17 Pro Max, but it also fits on my wife's 15 Pro. It also has an integrated tether hole which fits 5mm…
This model is an altered version of this original model: https://www.printables.com/model/982046-h2t-case-for-heltec-t11
Слой 0.2 мм, без поддержек. В планах сделать крепление в автомобиле и на стену.
Case for people who want to use a keyboard with their T114. This requires you to have small battery terminals to insert into the battery housing area, wires to solder onto the terminals, and the 1.25 molex pico blade connector to connect…
Case for Heltec T114 without screen
The case leaves just enough room for a wireless charging module. I haven’t tried fitting the GPS/GNSS module, YMMV. on the image, I used a small coil antenna inside the case. The original port for an SMA pigtail is still there.
The Alley Chat case is beautiful but position standart antenna too close to mainboard and battery. The remix has space to place antenna outside of main compartment to improve signal propagation. Additionally I tried to flatten come…
Avalable in my Etsy shop. Meshtastic Heltec T114 node case holds 2000mah batt. Chip friction fit in case use 2 3mx4mm screws to secure case buttons print in TPU.
This custom case is designed to integrate a Meshtastic T114 board seamlessly with the Fairphone. It provides a compact, reliable housing with support for an external SMA antenna connector, an internal 3000 mAh battery, and GPS…
- Supports 18650 protected AND unprotected battery 🔋 - Supports T114 and GPS Module 📌 - Used for Meshtastic, Meshcore, Reticulum This case for Heltec T114 is very tight and thick, I recommend to slightly lower the filament Flow Ratio to…
This is a simple enclosure to hold an RF choke or balun based upon a Fair-Rite FT114-43 or FT114-61 toroid. There is provision for a standard 4 hole BNC connector at one end with a flying lead at the other. The lid can be glued on once…
Remix available here in case anyone wants to change it to accommodate a different switch. https://cad.onshape.com/documents/d2163b89df43ee4159af0458/w/327c3224a9f3768a87eb29f4/e/863d52a883704fc4c1d25135 The switch is 3.5 x 8.5mm and press…
Forword: I am really bad at 3D modeling. That spaghetti-tree of garbage you're about to witness if you're good at FreeCAD? It works. That's all I can say. I did a lot of redundant things I'll get better at later. The main goal of this…
You need 4 pcs M3x4x4 heat-set inserts and 4 pcs M3x6mm countersunk screws. PS: added version for 103048 battery and Baofeng UV-5R clip/
You will need: Heltec T114 v2 with GPS ec11 encoder Li-Pol 3000 mAh (10*40*50 mm) 4 M3 screw 25 mm some soldier skills Print with supports
You should only use this model over the original if you specifically want to use M3 screws as opposed to M2.5. I already had M3 and so didn't want to order M2.5s. See the original model for instructions:…
Note: Remember that adding things to your drone will result in shorter flight time and affect stability. No warranties or assurances are included with this design, implied or otherwise. Use this system at your own risk! For commercial…
I added a small power switch in place of the vibra motor. It's intended to be very recessed to not be accidentally moved, even in a bag or when dropped. This is the switch on Amazon: https://a.co/d/0gSnlvK3 . clip off 4 of the 6 leads,…
Backplate with switch cutout for the MeshNRW Heltec T114 Case
This a compact case for a Heltec T114 with 14500 battery and whip antenna. There are 2 different versions: Forward Battery - The battery is proud of the screen. Reverse Battery - The battery is flush with the screen but protrudes out the…
Firmware agnostic case for Heltec T114 V2 lora module. Contains separate physical switches for power and GPS to control power usage. Fits single unprotected 18650 cell. Menu button is accessible. Reset button has intentionally been left…
![AlleyCat's Heltec T114 Pocket GPS Case [LED cutouts] [elevated user button]](https://media.printables.com/media/prints/241b2d97-8a0c-4c49-a520-2b100dfde4a5/images/10987558_e96b11b5-9647-4d9d-b112-74706dba54b9_1dc5c545-eb88-4bf0-8a4a-0228ad898e03/pxl_20251024_072036621portraitoriginal.jpg)
![[FIXED] Heltec T114 custom/bigger H2T case](https://media.printables.com/media/prints/47eca259-c13f-4bd3-8c6e-2c143494391a/images/11453354_531e09e3-9743-46fe-ba76-a851b48eb54c_c70c4be4-3e04-4c9d-999a-10bba21d9c8d/pxl_20251218_134511349.jpg)
