223 models
Zusammenfassung Version 2.0 des faltbaren Taschenkamms! Er ist kleiner! Er ist leichter! --.... und ja, das war's dann auch schon... Meine Version 1.0 wurde von Grund auf neu entworfen, und dies ist eine Weiterentwicklung meiner Version…
Here is my design of a Lightbar for the Prusa MK2* & MK3(s). Features: LED's directly powered by the printer Wiring running inside the mount Integrated filament guides for both spool sides On/Off switch Directly wired to the Einsy board…
Here's my new LightBar. It fits nice on the MK3 Frame and you can adjust the angle of the LightBar to get a good illumination. The cable is guided in one of the arms. I've printed it in Prusament Orange PETG to match the other Parts. You…
Update vom 01.08.2024: Größe “S” hinzugefügt. _________________________________________________________________________ Diese Füße sind für Blumenkübel gedacht, um im Winter Frostschutz zu bieten. Im Sommer helfen sie Staunässe zu…
Print the center parts with brim so they don't fall over. I used PETG, but PLA should work. Install video here:
Just a simple lightbar that clips in under the front lip of the AMS unit, providing light through the glass top into the X1 printer. Printed in two parts (due to length), it has columns that slide into the void space either side of the…
Light-bar attachment for the Ender 3 V3 SE that clips onto the X-axis gantry. Warning! The max Z Height will be reduced when this is on, the print head cable drags on the clips at the top. 240mm height is probably ok but do your own…
This is an arm that you can used to attach your Philips Hue White and Color Ambiance Play Lightbar to the back of your desk. The angle can be adjusted to your liking. The ony thing that is required is a M3 screw to attach the Lightbar to…
Hazzah! Purpose and Theory: To redirect the absoutely insane amount of light bleed from my cheap light bar I purchased and help me from being blinded by the light if I wanna check my prints. This helps redirect the light on to the print…
The Kobra X is an awesome little printer but the lighting is super lacking! I decided to tackle that with a simple and effective led light bar. This model is now updated to version 2! Version 2 moves the mounting points or the lightbar…
Enthält bisher Nr. 7 & 8. Schlüssel wurde erstellt da der alte abhanden ging und eine Tür noch heute geöffnet werden musste. Gedruckt mit PLA Meta mit Tree supports. Der Schlüssel hat gehalten und wirkte stabil genug um ihn zu benutzten.…
Same as the original design but longer to accommodate the extra width of the Ender 3 v3 Plus. Also modified brackets as the Plus is thicker.
This is a simple small format mobile phone holder that can be easily built without screws. To connect the two halves: Take a piece of your 1.75mm filament and cut it so that there is about 2mm left on both sides Place the piece as an axis…
Straßenlaternen vom Typ RSL 1 waren in der DDR üblich. Für die runde Mastform galt als Norm TGL 20997-01 aus dem Jahr 1973 [1] und Katalog B 7320 PEM [2]. Aus meiner Kindheit erinnerte ich mich an achteckige Masten nach einiger Recherche…
A simple but quite good looking Lightbar for Prusa Printers Print instructions Layer = 0,30mm No Raft/Support Switch: https://www.amazon.de/gp/product/B07BPQVQS2/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 LEDs:…
Soldered to the middle of the led strip, wrapped wires around arm, ran towards screen side, held down with tape and ran to the 24v on the board. Have since cut the wires and put on fully insulated spade connectors so I can disconnect the…
Remixed from Bofh_1377s excellent light bar - I had downloaded this to use up some IKEA LED strip I had left over from another project - but realised once I had printed all the parts that the strip I had was not the same as the one…
Die Pultbasis wird mit dem Rückteil des Senders verschraubt. Ich habe hierfür M3-Einschmelzmuttern in den Druckteilen verwendet. Der Sender muss zur Montage geöffnet werden (4 Schrauben hinten, 2 bei der Antenne) - Anleitung als…
Hi, I designed an over hang style led light bar holder with wiring channel for Anycubic Kobra 3. It is more modular. You can have one long strip, multiple short ones or even front and back (as in picture). Material: PLA LED: 5V USB LED
The Ender 2 Pro spool holder, z-axis anti-wobble, and lightbar can be printed with the Ender 2 Pro. It barely fits but it fits. I will post a pic of the orientation up above in the picture section. I printed mine at 50% infill with PLA+…
Hallo Zusammen! Hier habe ich einen faltbaren Petanque Abwurfkreis mit einen Innendurchmesser von 50cm. Die äußeren Pins müssen etwas eingepresst werden, weil sonst der ganze Kreis zu locker wird. Anschließend werden die Pins ineinander…
Printer: QIDI Q2, LED strip width: 8 mm. Updated design of mounts for an LED strip. For proper operation, the original LED strip must be replaced with any available one. It is important that the strip is rated for 24 V. Print with…
Prusa XL 3030 suitable folding spool holder with spring | 3030 Prusa XL 3030 kompatibler Klapp-Rollenhalter mit Feder
Innerbarends to get additional grip posistion on bike flatbar. Especially for wide fatbike flatbars, superior aerodynamics compared to normal grips. I printed mine with PETG, other pair in picture is sanded smooth. Weight 52g per pair…
Hi, I designed it for my Anycubic Kobra 3. It is only 5mm thick so it should not interfere with tall prints but use it at your own discretion. Material: PLA LED: 5V USB
Relativ Stabiler Winkel für alle möglichen Regalbretter, kann gut Skaliert werden. Wenn man die Decken und Bodenschichten =0 setzt kann man mit dem Infill spielen für eine gewünschte Optik. Bedenke, je mehr Äußere Konturen und je Dichter…
i made this off of my 98 Jeep Cherokee Xj. will fit a 97-01 XJs. My aftermarket headlights have blinkers integrated so i was able to remove them. The bracket is designed with full adjustment for a 7'' led light bar on amazon. see below.…
Die ist eine Wand Halterung für Govee Wandleuchte WiFi RGBIC LED Lightbar This is a wall mount for Govee Wall Light WiFi RGBIC LED Lightbar Print Settings Supports: No Resolution: 0.2 Infill: over 15%
Das Schlüsselbrett besteht aus zwei Elementen: Schlüsselbrett Der sichtbare Teil zum Aufhängen der Schlüssel. Benötigt eine Stützgeometrie an der Unterseite, die jedoch gut entfernt werden kann. Die Haken selbst können ohne Stützgeometrie…
This is an adaptor bracket that adds 2020 to the top of the SV08. It fits into the existing hardware and top bar without modification. This is intended to allow the use of the docks for the StealthChanger or TapChanger Toolchanger mods.…
Additional roof and lightbar for hot wheels garage. For the lights I use "el wire" 50cm long one.
Light Bar Mount for the AnkerMake M5 using a Philips Hue Play Lightbar. You can use the original M3-.50 x 10 Screw by Philips. ------ I printed with these settings: Resolution: 0.2 Supports: No Infill: 20% (Cubic) Rafts: Skirt Filament:…
I Remixed alexVinarskis's lightbar model to fit my generic camera from Aliexpress (uses 1/4" mount). Print with 100% infill - otherwise, the screw might break. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
This model is "Work in progress". All though it already works, I will post some updates and a full description in the future.
PS4 Lightbar Decal(s) Note #1: My Print settings are not perfect, so you will see some defects in my pictures, please don't let that discourage you from choosing my model! Note #2: THIS DOESN'T WORK ON PS5 CONTROLLER! What You Need: Sand…
A simple LED mount for Sovol SV07 Plus. I used an 8mm wide 24V LED strip from Aliexpress and connected it to the aux fan connector because I don't use it. Added a picture of the lightbar connector schematic for redesigning.
This Light-Bar design is inspired by the light of Ender 3 S1 Pro. LED is glued to a PVC Electrical wire duct and designed around it. Dimensions are given in the pictures. Power is taken from the Ender 3 Power supply itself with the help…
This is a simple light bar mod for AD5M. Attaches with 7pcs of 5x2mm magnets. I used basic 24V light strip bought from AliExpress, plus you need a 2-pin JST XH2.54 connector. Just solder positive and negative to the connector and plug it…
I really liked dubs49's design. Unfortunately, a quick print of a cross section of their bar showed it wouldn't fit the LEDs I had on hand. So I redesigned the bar from scratch to use the leds I really wanted to use.…
Bei uns waren die mitgelieferten Sockelclips zu kurz. Diese passen perfekt. Länge mit Platte gesamt ca. 86mm. Wenn eine andere Länge benötigt wird, bitte in Fusion bearbeiten. Die beiden Teile habe ich mit einer M3x10 Senkkopfschraube…
Verwandeln Sie Ihren Hauseingang mit dieser charmanten Osterdekoration in ein frühlingshaftes Willkommenszeichen! Das dekorative Objekt ist speziell für den Türeingangsbereich entworfen und lässt sich mühelos mit der integrierten Öse oben…
Print your own light bar
I got an Ender 3 V3 KE in November 2024. I've been printing for years on other peoples printers both filament and resin, but the price of the machines and time it took was not where it needed to be yet back then. Now that it is I started…
This is a modification I made to the excellent light bar design by SethBon to suit some aluminium extrusion I have, with external dimensions 7*16.…
This is a simple mount to put your Philips Hue lightbars on your Ikea Skadis pegboard. It's my first upload so please be gentle :-) You can print this with 0.2mm layer height and fill 15% without support . It fits perfectly, is stable and…
This is a set of mounting brackets for the Creality light kit. Modified from the original to fit the Ender-3 V3 SE, and add a wire clip.
This is my remix of this model, which was originally designed to combine the Xiaomi Mi Computer Monitor Light Bar with the Logitech Streamcam. While the original model was excellent, I needed a solution tailored for the Anker PowerConf…
The Table Clamp: https://www.gravitystands.com/en/products/accessories/2918/ms-tm-1-b
Like, Share, Subscribe and check my other 3D models! 200mm Lightbar for an Voron 3D Printer. I used 3 of them for my Voron Trident Please print in ABS
I was inspired by https://www.thingiverse.com/thing:4931271 But sadly that thing did not work for my AW3418DW monitor. So after a dozen of trial & error, I finally made something working great for me. Hopefully it works for you too.
Light bar / filament guide put both together (make sure of your fitment ) then glue on connector, should fit go and fits neo2 Added clip to files that i used to hide/hold usb cables from light bar ( runs down the right back side)
LED Strip holder + Endcaps. LED strip from Action Aluminum profile 10mm x 10mm x 1mm Update I've added a bracket for the switch Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2…
Simple lightbars for the latest Prusa printers. The design includes a clipable lightbar which lightens the front and the back from the top of the printer as well as screwable vertical LED pillars which light the build platform. The setup…
Eine Lichtleiste für den Ender 3 max, sollte auch auf den anderen Modellen der Ender3 serie passen. Für die LED Beleuchtung habe ich ein normales LED Band zum kleben aus dem baumarkt genommen. An der Seite ist im Deckel ein Loch um das…
To fit the original Creality Ender3 Neo LED Light Kit 24V 5W Ender 3,Ender 3 V2, Ender3 Pro, on the Ender 3 max Neo It is necessary to extend the original cables of the LED strip so that they can be connected to the right side of the lamp…
A amazing Beerholder to screw in the wall. If you need a beerholder - fold it down ant put your drink in. When you finished push it back up. I have it in my livingroom because we often have visitros to watch a movie together. No where to…
Frontbar with headlights for Landy Mini. Headlight print twice for left and right side. Mount using glue. Best result when headlight printed in transparent filament. Headlight's covers shoul be printed with the grid facing the printer…
Easy to print lightbar support for the top bar of the Ender3v2 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Filament: Any PLA black Category: 3D Printer Accessories
This is a re-build/reworking of https://www.prusaprinters.org/prints/882-prusa-i3-mk3-led-bar-holder-v2/ . I needed a bar that would hinge out of the way for ease of access to the plate/extruder, so I reworked the original by Kenji and…
I didn't like the mounts I found, so I designed this - uses less material than most. In hindsight, the fact that only gravity holds this in place might not be the best design choice, but it works well so far. Enjoy! Print Settings Printer…
Dart-Bar / Dart-Stand A compact dart stand designed to hold your best three darts in one place. The holes have a diamater of 9mm. Perfect for keeping your darts organized between games or for a clean display on your desk or shelf. The…
Custom light bar for 3D sets Model 14. This light bar is remixed and extended to be able to add 4 piceses of standard 5mm LED lights into the light bar. After the LEDs are inserted cabeling can be done and back cover can be attached using…
ENG: A slightly flatter holder for HUE Lightbars. The hole is sized for an M3 Allen screw. To attach just add a few strips of double-sided tape. Printet in PETG ----- GER: Ein etwas flacherer Halter für HUE Lightbars. Das Loch ist für…
Rohrhalterung mit wiederverwertbaren Kabelbindern für Hydroponik-Anlage mit 6,3 cm Rohrdurchmesser. Damit können höhere Pflanzen vor dem Umfallen bewahrt werden. Um in meiner Hydroponik-Anlage auch höhere Paprikapflanzen aufziehen zu…
This is a simple adapter for Logi Brio 500 and Baseus light bar. Print 2 of them for each side
I am attempting to make the lynx a low hardware blaster for people who can't afford or acquire the hardware necessary to build the blaster If you do have a lynx, a decent size 3D printer (size fits a ender 3 max neo) and want to test it…
EN: LED Lightbar for Prusa i3 MK2, MK25, MK3 This is an easy-to-snap light model for the printer frame. Note that there are differences in frame width of 5 mm on each side between the MK2 and MK3. For this reason, two sets of models are…
Sturdy brackets for those wanting to use their Philips Hue Lightbars for illuminating e.g. their workbench area. Single part 155 mm offset from the pegboard to get evenly distributed lighting on your working area. No additional materials…
The Xiaomi lightbar mount was slipping on my monitor (Viewsonic XG270q) since it was a bit too thick where the mount touched the back, so I whipped up a quick spacer to both move the contact point up, as well as move the front of the…
This is a lightbar for the Traxxas Summit. it is a direct bolt on to replace the stock 2 led lightbar on the front bumper. Designed it to be able to fit 6 pc of led to the bumper, so you can have a nice light bridge. With a regular…
This adapter can be used for mounting Hue Lightbars and hold your webcam behind your monitor. Hue Lightbar: The adapter can hold up to 3 Hue Lightbars. You need a wood stick with a diameter of 14mm, which you can pick up at any hardware…
Einfache LED-Lichtleiste zur Verwendung im Voron V0.1 (geht wahrscheinlich auch im V0.2). Die Lichleiste sitzt hier anders als bei vielen anderen Versionen auf den letzten oberen Seitenstreben in einem 45° Winkel um den Bauraum möglichst…
Version 2 over here Hi, this is my first project with 3D-modelling and Fusion360, please be gentle. I used the lightbar socket from myit on thingiverse ( https://www.thingiverse.com/thing:4735701 ) to make my life easier. The mount works…
Standard-Jeansknöpfe aus Metall können ausreißen, und Ersatzknöpfe aus PLA oder PETG sind oft zu spröde für die mechanische Belastung am Hosenbund. Dieses Design nutzt die spezifischen Materialeigenschaften von TPU 98A , um Spannungen…
Yet another LED lightbar bracket for the Prusa MK2, MK2S, MK2.5, MK3 printer. Print instructions I really like having a LED lightbar mounted out in front of the extruder motor at the top of Z axis. I have been using one of the models that…
Bugeye Zuma conversion to 6" LED lightbar. Will require a bracket behind it be cut or hammered to fit. Modeled for 6" Nilight LED lightbar from Amazon(link below). Included Blend file for headlight bezel as well as a bracket that fits…
I bought a Traxxas summit 1/16 body and I did not have a front or a rear bumper, so i designed and printed some with lights. I also wanted a light bar on the roof, so desinged and printed that to. I also did not have any stickers for the…
This model allows you to hold your SUNLU S1 filament dryer box above the Mk3 by suspending it on the frame. It is designed to avoid colliding with an installed lightbar unlike the original version. Also, I have removed the skeletonized…
ich benutze es z.b. für schlüssel weil ich sehr viele habe und nie weis welcher für was ist
Just clip in the cover to hide the screws. Happy printing!
Neigung: 30° mit Vertiefungen für kleine Möbelgleiter
Durch ein Gewinnspiel bin ich auf die Lightbar von Philips gekommen, wo mein erster Gedanke war “die geht gut selber herzustellen”. Der Grundkörper hat eine Öffnung für den Stromanschluss und einen Klipp, damit dieser auch dann fest…
Spacer makes lightbar to clamp reliably to oled42c4(i'm pretty sure that it will work with c2 and c3 as well) and prevents it from skewing, 3mm spacer is made to offset light bar up, so lip doesn't goes beyond bezels and overlaps the…
Dies ist eine Lichthalterung für den AnkerMake M5. Lichtleiste: https://amzn.eu/d/c0G2TBE
Universeller Hacken ohne sichtbare Schrauben. Auch für Powerstrips geeignet. Version mit und ohne Markierung. Markierung kann im Slicer beschriftet werden, Beispiele sind auf Bildern zu sehen. Gedruckt mit 0,2mm PETG.
it's just a remix of the original: https://www.printables.com/model/15259-prusa-mini-lamp-holder including an Prusa 30x30 T-Slot Nut with M5 thread You need one M12x5 screw
A simple handlebar mount for a 6in. light bar on a bicycle. Unless you have a weird stem or bars that bend super early, these should fit most if not all 31.8mm bars. I used a 2021 Giant Stance for fitment. Photos are from an unfinished…
Printed with a “transparent” PLA since I didn't have any transparent PETG. I did a variable layer height so that I could sneak a thin layer of white PLA in there for better diffusion.
The holder is suitable for mounting a Lenovo T16 and a 16" monitor that can be folded back and forth on a shelf/window sill or table. The holder can be mounted on up to 21.5mm thick boards, tables or window sills (use the step file for…
Couldn't find a simple bracket to fit under cabinet led lights like the ones I had so I designed my own. Printed using PETG for extra flexibility on the clamp. Might work with PLA too. The light bars can be mounted with M3x12 counter sunk…
Hi. I searched for a way to light up my printer. My plan was to use some WS2812 RGB Led's. So i ordered 1m 144 RGB LED's from Aliexpress. The only problem was, that i couldn't find a nice case for the LED's. So i designed my own. The bar…
Straight through holes to make it easier to print, more rigid and easier to clean.
This is a Lightbar designed for the Axial Scx24 C10, to be mounted on the roof using double sided tape or drilling holes to screw it on. It may fit other scx24s but haven`t tried it out. It was made to fit 5mm 1/10 lights with the metal…
This is a remix from the original owner. I just needed to make some minor changes to make it fit my LED strip. Also changed the design so it doesn't need brass inserts. The two parts fits perfectly together to be locked in place. Printed…
I wasn't a fan of a lot of the lightbar arms around so I modeled my own and am pretty happy how they turned out. I made a long arm, 190.75mm long (170.75mm past the extrusion), that can hold two stripes and a short arm, 131.6mm long…
Hi, this is the second version of my Hue Play Lightbar mount. The first one started to sag a lot and I redid the model completly to now feature a hinge. Everything else pretty much stays the same, but you can now adjust the angle to…
