11,822 models
Christmas Tree 4-in-1 We present our latest Christmas decoration – Christmas Tree 4-in-1 ! This model includes four different variants that you can print in various modes to create a unique atmosphere in your home. Tree Variants 1. Solid…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Original link by KerberosFl : https://www.thingiverse.com/thing:3100640/files
Print approx. €6.70–€8.19 excl. taxPreliminary estimate for one variant
When I loaded the file in Prusa Slicer it detected ~1800 errors. So I ran the file through Netfab to fix those. Nothing fancy but it might save someone the 5 mins it takes to run it through Netfab. Sunset owns the rights to this.
Print approx. €8.53–€10.43 excl. taxPreliminary estimate for PETGSource material: PET
Knurled Modular Threaded Stackable Container. 100mm outside diameter. 20mm, 40mm, & 60mm side wall height containers (with bottom) and expanders (without bottom). Top and bottom can be used to make a 40mm tall container. 3mm walls. Print…
Print approx. €8.19–€10.01 excl. taxPreliminary estimate for PETGSource material: PET
This is actually my wife's idea and I made it for her. She needed toilet paper holder. Looks fantastic fully loaded by white rolls. Happy printing! Print instructions This design fit on typical MK3 heat bed 25x21cm. Body is made with two…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
I liked the idea of the MINI 3 wing knob for the MK3 that @SethBon created. However, after I printed it, I realized that the thumb knob part is flat, and I prefer the indentation of the original part. So I pulled it into Fusion 360,…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Cubed Gears A cube made from gears with a center block and pins to fit everything together. Easily printable with PLA no supports needed . This one is printed with a two colored illusion filament. This kind of filament changes his color…
Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant
This is a golf ball marker, for marking 3 straight lines on a golf ball. It was designed as slightly more than half of a sphere so it sort of clips onto the ball. I made this hoping that you would use a standard Sharpie on the middle line…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Introducing the Chess Rook with a fascinating passthrough illusion! This model appears to defy the laws of physics as the "male" part of the thread passes through the slightly larger "female" part. This effect is not only visually…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Toilet - THRONE ROOM right side - sign, easy to print
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
2024-01-23 update nová verze poličky - dno s motivem Voronoi + výška dna zvýšena __________________________________ Bylo nutné nahradit původní poličky a ve zdi zůstali hmoždinky, využilo se původního umístění šroubů (nejsou symetrické)…
Print approx. €13.77–€16.83 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: Some people have had trouble with weak screws, so I've uploaded new files for the screws, made to be printed horizontally for stronger layer lines. Most printers could print the regular screws just fine, but if they seem weak…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…
Print approx. €3.90–€4.76 excl. taxPreliminary estimate for PETGSource material: PET
Three Muses Goblet / Vase Remake of a Pompeii bird bath into a goblet.
Print approx. €8.22–€10.05 excl. taxPreliminary estimate for one variant
This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
I created this, because i had to put a light, with a 5/8" inner thread, onto a tripod with a ¼" outer thread. you can simply screw it onto your ¼" thread with a screwdriver. I tested and printed this with petg, 0.2mm and 50% infill, works…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
After stubbornly refusing to make the attempt, I finally succeeded in modeling ¾ inch NPT threads. This model can server as a plug for a ¾ inch PVC threaded female adapter. But it is generally useless on its own. What it does represent,…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
Thanks a lot to @Noname_Engineer for that great GoPro tripod model. I was too lazy to go out to a hardware store and buy thread parts. And I also needed a trippod mount very quickly (stores were closed). Because of that I just added the…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple and easy to mount shelf for the corner of your shower. It is mounted with double sided tape and is big enough for 5-6 normal sized bottles. The design is sleek, simple and has a feeling that it is floating. There are…
Print approx. €7.63–€9.33 excl. taxPreliminary estimate for one variant
Small version of a well known theme! so be proud and happy!
Print approx. €6.21–€7.60 excl. taxPreliminary estimate for one variant
Inspiroval jsem se u MatsErik Soda Bottle Trap , ale vymodeloval od nuly. Díky za inspiraci :) Vyrobeno ve Fusion 360. Nejlépe vytisknout žlutou, troška vína je asi nejlepší, nebo dejte do sklenice nějaké ovoce (banán a trošku octa pokud…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
Our legacy hardware is now in the PUBLIC DOMAIN! Thank you to all your support and feedback! I have attached the Version 8 hardware and full CAD files This whole project was inspired and based on Joe Barnard's design:…
Print approx. €6.89–€8.42 excl. taxPreliminary estimate for one variant
Game of Thrones DireWolf Plaque An experiment with displacment on curved surfaces after remesh x10 octree. It was pretty wild displaced on a remeshed sphere. a bit too wild. BONUS: this was lost in the myriad of open projects I had…
Print approx. €15.67–€19.15 excl. taxPreliminary estimate for one variant
Update March 15, 2022 : Added simplified STL files. Blinky is the next step in evolution. Originally showing up in The Simpsons , we know his species lasts at least 1,000 years into the future as he also shows up in Futurama . Assembly…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
This is the iconic three tiered pole puzzle Michele Fitzgerald crushed that was featured on Survivor 32 Kaôh Rōng. This puzzle also appears on Survivor 40 Winners at War with some slightly altered pieces. I will be creating a remixed…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
I added a loop to my UFO model, so it can be attached to a keychain. The UFO is made out of three parts, every part can be printed in a different color/material. (I used a luminescent filament for the top) The parts fit very tightly…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Game of Thrones Night King Bust. (kind of looks like he is part of a “got milk” campaign)
Print approx. €16.12–€19.70 excl. taxPreliminary estimate for one variant
The Puzzle Box V NIce easy to print Puzzle Box - great way to give a small gift. Once closed, the box is very eay to open - if you know how! This is updated fifth (and I hope final) version in my "Puzzle Box" series...Now even harder to…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This is a simple tri-glide webbing slide for 1" webbing. There is a threaded and no-thread version. Update: versions are also available for 30mm, 1.5", 50mm. Design parameters: The webbing slots are sized for 1" webbing (actual width is…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Toolbox socket organizer for 3\8 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Wargame Building Terrain - Stand Alone Building - Group Three! Complex stand alone building with floor! Complex stand alone building with floor and slide in door! Complex stand alone building with No floor! The empires of the future won't…
Print approx. €4.06–€4.97 excl. taxPreliminary estimate for one variant
These are humorous bathroom signs that I made. There a a couple different shapes to choose from The default STL's are as big as I could fit on the Mk3 but you can resize these very easily to any size you need. Printing These print great…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant
Update Hollow version of all 4 sizes posted and tested. Stl, bgcode and 3mf files updated. Hollowing saves nearly ⅓ filament at roughly the same print time. Below pictured test print failed due to user error. But even with the 90%…
Print approx. €10.80–€13.20 excl. taxPreliminary estimate for PETGSource material: PET
A basic model for quick and repeated printing. Key attribute is the blade which has been blunted so kids can play safely. Printed on a MK3S+ at 0.2mm quality, PLA, no supports, and 15% infill.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
The egg is 105 mm high and is completely pass-through. As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
The models can be printed in any material you wish! I printed them in 60% scale as i didnt need them to be that big, but feel free to print any size you wish! The premade G-Code is at 60% scale. The model is a tool to learn the difference…
Print approx. €9.49–€11.60 excl. taxPreliminary estimate for one variant
update october 2023: I added new optimized version V2. This works a little bit better for me. Feedback are welcome. I recently got my MMU3. Unfortunately, threading the filament into the buffer is very difficult if you have to hold…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
EN: Box for three 1.5V AA batteries in series connection. Print without supports. The electrical part needs: - 3 pc anode battery contact AA/AAA type 228 (12x12x0.3 mm) - 3 pc cathode battery contact AA/AAA type 228 (12x12x0.3 mm) Simply…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Digital File to DIY 3D print ER20 threaded (25x1.5 mm) Chip Fan. The chip fan produce at lot of air movement so it is recommanded to use it with a strong vacuum capacity dust boot. Use at your own risk (mine is working fine). STL, 3MF and…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector. This allows for you to print your own threaded part for the best push connector option rather than having to break out the soldering iron for a…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
I needed to make something to attach to a PET bottle and couldn't find a model file to import into FreeCAD. So here's one. The model is not really useful for anything (unless you desperately wish to have a ring screwed on top of your PET…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for one variant
Remixed original Dry Dock model to have places for x3 Benchies side by side, since you can never have enough Benchies. Also it's a solid stringing test for the upper part. Sliced version with colour stop included, in case you want to…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
For over a year now, I've been signed up for Proto-Pasta's Endless Pastabilities which sends three 100g spools of Filaments every couple of months. I absolutely LOVE Proto-Pasta and look forward to getting these unique filament colors…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Using under 5m of Filament, and printing in less than 90min, this is a perfect little gift card box you can quickly print while you're getting ready to go to that party. It's formed by a base, lid, and “ribbon” which neatly fits around…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
print without support
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Info: wrench for badly accessible nuts under the sink long handle (14cm) wrench/nut 12mm for threaded rod up to 8,2mm (which fits inside the wrench middle hole) remixed original (thx volkhen !), because i needed: different nut size longer…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Traffic Cone Spiral Passthrough Fidget Toy
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
For best results, print each piece in a different color. Higher infill will create heavier parts that will passthrough each other better. Works fine at 5% as well. No Support Needed!
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
Design can be modified inside OnShape completely by using Variables. Link to OnShape…
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
M4, M5, M6 T-Nut Assortment for following Alu Profiles: - Rose und Krieger - Item - Flexlink - Bosch / Rexroth - Minitec Thread is included. Can be printed with 0.15mm Layerheight. OnShape Links: Bosch/Rexroth…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Description This is the knife/throwing knife from the game Helldivers 2 Printing: Nozzle : 0.4 mm Layer height : 0.2 PLA supports needed
Print approx. €4.81–€5.87 excl. taxPreliminary estimate for one variant
needed parts (4x): PC4-M10 screw M3x8 nut M3 PTFE hose 2.5 x 4 x 80
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
This is part of my cistern stuff… it's a ¾" pipe thread to garden hose adapter. Pretty simple idea, I was using it for my tee for my pump header as well as for the bungs on my cistern. Obviously want to print it 100% infill, and you…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
The thread is loosened by 0.2mm, to allow for printer tolerances. Nut fits well on machined counterpart. Printing directions: 0.1mm layer height () 15mm diameters Increase vertical walls to 5 so no infill is left larger diameter 1…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
This is a lowpoly remix of the Discus Thrower (Discobolus) sculpture from "Scan The World". The sculpture was originally made by sculptor Myron of Eleutherae dated circa 450 BCE The .gcode file has fairly robust supports because the model…
Print approx. €14.03–€17.15 excl. taxPreliminary estimate for one variant
Print your own 1:490 scale model of the Northrop B-2 Spirit aircraft! The B-2 Spirit is designed with advanced stealth technology to make it virtually invisible to radar. Its shape, materials, and coatings minimize its radar…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Print Tips Material: PLA Layerheight: 0.15mm (STRUCTURAL) Perimeters: 2 Infill: Grid Support: Yes (Custom)
Print approx. €8.65–€10.57 excl. taxPreliminary estimate for one variant
Remixed this lovely décor so it could fit into Prusa mini. Please note that the gcode files are enlarged by 15% compared to the supplied stl files. They are the largest possible print size fitting Prusa mini print bed.
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
If you want to practice throwing cards, then this is the best thing you can print, the plastic is much stronger than your ordinary playing cards and will not get destroyed as quickly. Its the best solution in my opinion to learn how to…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Decorate your vault with a classic Vault Boy poster using this three-color stencil set. Whether you're binge watching the Fallout TV series or replaying Fallout 4, this stencil lets you bring a piece of the Vault-Tec world to your own.…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
not much here just use the included gcode file and print. Attach to your wall using screws
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
This compact case for three AAA batteries can be printed using only two meters of filament. Prints without support. You can print both the base and the lid as one print, but if you prefer (for example to use different colors) you can…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household vacuum hoses. I harvested an old Eureka hose (the black one pictured), an ancient…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET
Large nut captured on threaded rod that you can move back and forth to keep your hands occupied. Printable at 0.2mm layer thickness
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
Pass Through V2 Wargames Wall - Section 8 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Print approx. €9.24–€11.30 excl. taxPreliminary estimate for one variant
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
Print approx. €6.54–€7.99 excl. taxPreliminary estimate for PETGSource material: PET
Designed to lock and seal around a 12mm diameter by 8mm (max) deep hole while passing though a 4mm diameter (eg. USB) cable. I use this to power my dry box's wifi connected hygrometer.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Use this to hold up to 7 Gütermann thread spools (100m) and bobbins on a SKÅDIS Pegboard. This is a remix of the files “ISS01_Thread_stand.stl” of Skadis super easy to print sewing organizer by @Agata_1596875…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Magnetic insert with hidden three 6mm magnets with arbitrary thickness. Magnets should not need to be glued, they should hold by the friction (mine do). Even with “standard” 6x2 neodymium magnets (e.g., usable with Gridfinity) it can hold…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
This is a thread adapter M10 inside 1/2"-20 outside. I've used it to adapt a quick-release-chuck to a M10 thread of a piston of a turning lathe.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Based on jtpeyton Digitrax Throttle Dimensions. I needed to change the bottom to allow access to the Loconet Cable port (because I use a tethered system), and the lanyard attachment to fit in the holder for the Digitrax DT600 throttle. It…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
Originally designed by Guido van Hout, slightly remodelled with coarser threads and chamfered inside/outside to reduce overhang and seam size. Prints in 0.2mm but nicer in 0.15mm. Female side needs to have a brim otherwise your chamfered…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
This 190mm high Trash Can matches with https://www.prusaprinters.org/prints/29994-toilet-paper-roll-stand and https://www.prusaprinters.org/prints/29986-toilet-paper-dispenser It has a matching ring to clamp a bag in place. Print…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
You've already invested in a Gridfinity organization system and need to store thread or bobbins. This is the solution for you! I have included models for staking 1 - 3 spools on top of each other as well as a model that will fit 4 smaller…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Ferrari logo for thrustmaster wheel badge. The badge is meant to pop in and out. It is a tight fit. It will snap in no glue required. You can add glue if you would like. To remove the logo, use a small flat blade driver at the back of the…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Timeless model of a kit card of three guitar plectra, such as to use it as giveaway for a guitar enthusiast or else. Includes step file to edit, add a name or else. They include a hole for keychain, see my other models for 3D printed key…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Design Concept The Three Wise Monkeys figurine concept is inspired by the ancient proverb "see no evil, hear no evil, speak no evil". This charming design with winter hats adds a playful and whimsical touch to any collection. Purpose…
Print approx. €3.69–€4.50 excl. taxPreliminary estimate for one variant
Pass Through Armoured Wargames Wall - Section 6 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get…
Print approx. €7.11–€8.69 excl. taxPreliminary estimate for one variant
The girlfriend is always in a rush in the mornings and as her Aveeno brand lotion gets so low that the fluid no longer pumps out of the top, she has to resort to turning it upside down and gooking it on her hands. The problem is, as I…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
You need to turn it in first time. The screw holes will become smooth.
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant
Mount select TP-Link camera models on a standard quarter-inch thread using the existing twist-lock base. This is a copy of the existing twist-lock mount, but with threads for mounting on a tripod or similar, if you don't want to drill…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Selector front plate for Prusa MMU2S/3. You can attach PC4-M5 coupling without M5 threaded insert. So, you use this model if you want to change the color of MMU2S/3.
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
[EN] Simple three-colour heart-shaped pendant. The pendant is adapted for multi-colour printing in layers using the M600 command (or simple manual filament change). The ideal layer height for printing is 0.25mm (then exactly 2 layers per…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Added a thread on the end to screw onto a 27.4mm thread, like the one on the diy vacuum bag here: https://www.thingiverse.com/thing:6107866. (it is a really good diy vacuum bag by Johnnywatchbox on Thingiverse). If your vacuum starts…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
Do your scissors always disappear when you have finished sewing and need to cut the threads? Then this little handy tool is for you. Mounted with double-sided 3M tape and you are good to go with your sewing projects. Stuff you need for…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
GRAVITRAX ; Ever wondered why they only do small and medium corners combined? You can do triple small corners now too. Is that Column in the way too? Let’s pass through it then. Just print your own! GRAVITRAX Stone with triple small…
Print approx. €2.72–€3.33 excl. taxPreliminary estimate for one variant
This will allow you to print via reverse-Bowden without taking the filament out of the drybox. Mounting is done via three M3 socket-head cap screws and hex nuts. The length of the screws will depend on your container wall thickness with…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
My throttle control lever handle broke off. After several years of just using the metal arm, I decided to draw up a replacement that could be 3d printed. If you need one of these, it is a quick and easy print. Might save you a few bucks…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
