98 models
So I wanted a simple armed clamp to hold the two surplus iPhone 8's I had; using one for timelapse and one for PrusaConnect seemed a GREAT idea, but initially I had to cobble together things with some phone holders that weren't intended…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for PETGSource material: PET
I like the idea from EddiePrints, but wanted a version where the Remote was not zip tied on, so i easy could remove it and use it somewhere else. Also wanted it on the other side of the printer. By this, you have to remove the remote on…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Timelapse trigger holder for d3v-163-1c5 microswitch. I suggest using long arm version of the switch. Will be triggered at X=0, custom G-code needed for timelapse (see below). Print clip side down, as show in print bed image. Clips can…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Timelapse with phone prusa mini/+ with bluetooth trigger remote control https://fr.aliexpress.com/item/1005001315484292.html?spm=a2g0o.order_list.0.0.19175e5byw0J8Q&gatewayAdapt=glo2fra G-code after diaper change ;AFTER_LAYER_CHANGE G00…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
Description An affordable Arduino Turntable designed for Time lapse photography. It can also be used for Photogrammetry or Video by adjusting the code. By default it triggers the camera then turns a predetermined number of steps then…
A very simple adjustable GoPro mount for a rep-rap i3 style 3d printer. The mount sits between a bed screw and the Y carriage making it easy to swap without removing the bed. Perfect for timelapses since the camera moves with the bed. Any…
Full details and how to build available via the Connected Environments Site at University College London - https://connected-environments.org/blog/allsky/
LIKE SHARE COMMENT!!! For installation on 30mm diameter hole on stock printer brackets (sheet metal). Sheet metal thickness 1mm. I have been using 4 bearing spool holders for a while but the spool fell over 2 times so far during long…
i needed a way to fix this shutter to the printer, as slick and nice looking the ender 3 s1 is, there arent any easy ways to fix it but i think i managed to create something useful. WHAT TO PRINT: you will have to print the mount…
my first Frankenstein make for time lapse without octolapse and standard shutter button. Looks ugly. but works. this is a remix of some two model, I don't have originals
You can see the application video from the following link: Iphone EarPods; https://www.apple.com/shop/product/MMTN2AM/A/earpods-with-lightning-connector Resolution: 0.1 mm Infill: %30 Filament brand: eSUN Filament material: PLA+ Cold…
---First upload--- I made this attachment for fun to try out timelapse with my smartphone. It fits perfect on the ender 3 Pro without doing any changes! One “arm” that can press the botton and one “recever” on wich you mount the remote…
I did this with 0 top layers and 0 percent infill.
Hi everyone! I want to share my method to create "acceptable" Timelapses. Currently, i'm not able to create those brilliant/perfect ones that we can see all over the internet but i hope to soon find the good configuration. With this…
HOW TO MAKE 3D-PRINTING TIMELAPSE VIDEO WITH DSLR CAMERA Step 1: Getting the equipment IMPORTANT: Remote Triggering Mechanism is compatible with Pixel Wireless Remote Control RW. You can use affiliate links for shopping, if you want to…
3D print our snap fit case to house a Raspberry Pi 4, Pimoronoi’s 4-in HyperPixel display and the new camera module V3. YouTube Video Learn Guide https://learn.adafruit.com/pi-timelapse/ Raspberry Pi 4…
Very easy to print, will work with pretty much any settings, no infill is required. The 3 towers don't actually ever converge but are held together at the base. Made for a good timelapse. https://youtube.com/shorts/6Ecei_eLhCM?feature=share
Overview The timelapse feature of OctoPrint is one of the main reasons I set it up on my printer. But, the image quality can be somewhat limited to what a webcam can provide. So, with some inspiration from other creators online, I…
Simple mount that clips over the frame to position for timelaspe of print. Position on side for fully self supporting print.
Smartphone Timelapse - Tripod Adapter pour IPhone 13 ou équivalent en taille
I designed a mount that attaches over the X-end clip on the Prusa MK4 X-carriage so I could mount a camera using Sneaks' articulating mount system: https://www.printables.com/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m…
Have you ever wondered how to do high quality 3D Printing timelapses like this? Well so did I, which is why a spent a ton of time figuring it out so you don't have to! Makers have been showing off the 3D printing process with timelapses…
This is a part I have designed to make it easier to mount my camera when making time lapses of my prints. I have found it difficult to prevent the camera from shaking when recording timelapses, this part should let me mount it using…
I wanted to record some timelapses, so i needed a stable mount You will need the following: 1x m5 nut 2x m6 nut that re inserted midprint Happy Printing! You can support me via a tip clicking on the link: Tip me on KO-FI by klicking here:…
This is a Timelapse Clock Holder for Prusa I3 MK3S. It is fixed on the X axis. The button is designed by Stebo : https://www.thingiverse.com/thing:1570116 Print Settings 1 x TimelapseClockHolder1 : Layer:0.20mm Raft:no Support:yes…
Timelapse slider - version 2 This slider is successor of Timelapse slider for action camera which I made previously to make sliding timelapse video like this one: Slider consists of just a few mechanical parts (no electronics inside) and…
Simple model to mount these https://a.co/d/j3AfXrr to the X axis arm on the Anycubic Kobra Max for DSLR timelapse. Use double sided mounting tape on the 3 flat surfaces to secure it. This sits right at X-400mm. My printer will not go…
Hello, here is a support to hang a small clock ( Amazon French link ) in order to see the time passing during timelapses. requires 4u 6x3 magnet
You can use any filament except flex ones.
This is my setup for a window-mounted Raspberry Pi Zero 2 W timelapse camera. The hardware assembly (Raspberry Pi & camera mount) is attached to the window mount with screws, allowing you to tinker with the hardware and re-mount the…
Simple mount for a limit switch to wire a DSLR camera to your Neptune 3 Pro or Plus 3D printer to capture nice timelapes
Mini Spy Camera For this week’s project, I built a portable mini camera and In this guide, I’ll show you I how I built it. I think this is great for anyone looking to build a DIY project with a low cost camera. I’m using this to create…
I designed the stand for this specific LED Bar you can purchase on amazon: https://www.amazon.de/dp/B07DPJ1KXC?ref_=cm_sw_r_cp_ud_dp_C57NM2231KNCJF89B9P2 But it will work with any other light bar or profile that has the same dimentions.…
Ho voluto realizzare questo progetto per eseguire Timelapse con la mia Mirrorless senza dover necessariamente utilizzare Octopi. Il progetto è sostanzialmente semplice, un micro contatto viene premuto alla fine i ogni layer e macchina…
RU:Крепление было разработано для съемки таймлапсов. Я часто использую в своих роликах такие видео для наглядной демонстрации напечатанных деталей. И мне надоело ставить камеру на штатив. После нескольких случаев когда я уронил камеру на…
This is a bracket I designed so that you can take timelapse videos with your Elegoo Neptune 3 series printer using a DSLR camera. This was modeled in Fusion 360 and prints pretty quickly with some simple settings, There are holes for M2…
I had this idea that with a little planning and effort, you could add animation to your timelapses! I've included some files for you to play with.
I recently bought the LayerLapse Timelapse Camera Trigger (by Whopper Printing) and decided to design a case and sensorholder for it for my Prusa XL. I have also designed and included a centerfinder that will make it easier to frame and…
Hello🖐. This is my take on a dolly system to make 360º timelapses during time-lapses while printing. The rail parts and the holder require thick walls for protection. I tested PLA and ABS prints and in the end, I preferred PLA for…
Timelapse slider As next part of accessories for my Sony FDR 3000 I decided to make slider for timelapse movies. You can see on following example: Slider consists of just a few mechanical parts (no electronics inside) and can be…
Forking a part of another assembly as individual item https://www.printables.com/model/228470-single-bearing-spool-holder-w-timelapse-covers https://www.thingiverse.com/thing:4649148 It is intended to be a filament spool cover - wheel…
I have modeled a secure mount for the bluetooth button in place of the filament residue sensor for kp 3s pro. This is the tenth stable version, which has shown its result well. In order to make a timelapse, all that remains is to add the…
This is a test print I made up to test out a timelapse set up that I had. I spells out the message " I did it Wooooo" See the timelapse video below for the result. I referenced the Prusa blog on how to make a timelapse set up,…
Simple additional limit switch holder for timelapses designed for Ender-3 but compatible with any V-Slot printer. It can be easily assembled with M5 T-Nut and tuned for the max travel on the axis.
A timelapse dolly rig I constructed from an aluminum sliding rail I acquired long ago. The rail came with an aluminum sled, but I removed the slider bearings and affixed them to a 3D printed sled instead. I designed a belt tensioner using…
For the assembly you only need a limit switch, a wire, one jack 3.5mm connector, and 3 metric 2 screws. The following model is the one I have used:…
This very simple design allows you to create time-lapses of your prints using a Bluetooth smartphone remote. This design was made for the TwoTrees Sapphire Plus, but I will include the file in STEP format for easy remixes. Here is the…
This is a Box to store your LRTimelapse PRO 3 Timer Print instructions Category: Organization Summary This is a Box to store your LRTimelapse PRO 3 Timer
This print replaces two of the Prusa MINI+ parts with modified versions: A mount for the remote and a clicker to press the shutter button on the remote. Using a few lines of Gcode, this setup can perform Octolapse-like timelapses, without…
Enhance your RatRig V-Minion 3D Printer experience with this Timelapse mod, designed to capture high-quality Timelapse footage using your mirrorless or DSLR camera. While not tested with smartphones, it may be compatible if you have an…
There are pegs for the microswitch to sit on, but I found them to be a little delicate so I just added some glue to the switch. Use m3x45mm screws to replace the existing 40mm countersunk ones. STEP file included Supports necessary Gcode…
Printed on its side in PLA with 25% infill. No supports needed
[Necessary parts] ・Screw M2x12 :2pcs ・Washer M2 :2pcs ・Nut M2 :2pcs ※Locknuts are preferred https://www.amazon.co.jp/dp/B01MXBS4MB/ ・Micro Switch SS-01GL2 https://www.amazon.co.jp/gp/product/B00ECVZ2MO/ ・Cable Tie W2.5mm ・Bolt M4x10 or…
I designed this fastener for the button that is pressed by the extruder after printing each layer. The button is connected via Bluetooth to a camera or phone. After clicking on the button, a snapshot is taken on your device. The button is…
Ony you need to du is glue the parts together. Print Settings Rafts: No Supports: Yes Category: 3D Printer Accessories
This is a button mount that can be attached to the X-axis wheel plate of the Voxelab Aquila. I'm not sure if it will work on the Ender 3 V2, but it might since they're basically the same printer. This will mount with the stock chassis…
I remixed Cube3dWorld's remote trigger holder for the Pixel remote ( purchased from Amazon ) to line up correctly on the MK4. I also created a new remote poker using Prusa's official Back Cover R3 for the MK4's Nextruder. NOTE : I'm not a…
I have designed this bracket to hold my custom designed GoPro trigger circuit in place, as well as nicely close off the Einsy Enclosure. For more information about my GoPro Timelapse Trigger check it out on Tindie . The trigger is placed…
Base for voxelab aquila c2 3D printer compatible with Ender 3 to make timelapse with your cell phone
Will work with most 1/4"-20 phone/ipad mounts. Here is a short video of a timelapse using the rig. https://www.instagram.com/p/BebecxxF5yR/?taken-by=jocomakerspace Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: No Supports:…
Cheap timelapse upgrader - Works on all printers This is a model that clips on to a normal aluminium extrusion. The mount supports a normal samsung headset but will most likely fit with most headphones. This model will clip on to the…
This is a clampable shelf which is strong enough to hold .. a lot. There are two easy rotatable knobs to clamp the shelf where ever you need one and the size of the shelf is big enough to house e.g. a tripod with a very long (or short)…
This is simple remote camera switch for timelapse photo shoot. It is designed for Ender 3 S1 Pro. Timelapse Camera Switch Bluetooth Camera Switch used: https://amzn.in/d/erujHoz (compatible with Android and iOS) You just have to put it…
Hi, here it is. Solution for ender3… Life saver :D… Nvm :D if you want make a timelapse with your ender3 but you dont want soldering or adding a rpi and modify your 3d printer here is solition for you. Also i created only mounting for my…
I made this camera arm for 3D print timelapse videos. It's very strong to hold a camera and a circle light source together. You can install on it a standard 1/4 ball joint adapter. Use 2x M4 screws and 2x M4 nuts to mount together with…
I really loved the design of the Time-lapse Harness for the Ultimaker, so I decided to go and model my own mount in OpenSCAD. Should be quite stable, though it is too big to fit in between the two knuckles in the bottom corners, and it's…
This is a minimalistic cover to house a bluetooth remote trigger and a Solid State Relay (SSR) to create beautiful timelapses with your smartphone. Fuction: The GIPO Board sends a signal to the relay which then simulates the button press…
In this Tutorial i wanted to show you how you can hide any message inside of your 3D Printed model and have it perfectly synced with the audio of your choice. You can use any kind of audio. Song lyrics, movie/TV quotes, Gaming dialogues…
So, yeah, there are several existing prints for what I wanted to achieve. But I had a spare old cheap wired selfie stick which I wanted to use. This way you can use any old phone (as many new phones, especially iPhones don't have audio…
No rooted firmware for K1C 2025 at time of writing. No custom webcam, no Octolapse. 😡 This is a set of simple Bluetooth remote holder and "trigger stick". Do timelapse with your smartphone by using the print head to trigger the remote on…
This is a fun Timelapse message that I did using the sequential print feature in slicer. Th G-code has the pauses between layers already set up and it prints 1 part at a time.
the M5 timelapse feature is so bad I made this jig that you need to mount on the bed. you'll get great timelapses. You need to remove the build plate mounting screws to mount it. and then the buildplate should slide in.
Remix of https://www.thingiverse.com/thing:6401198 The beauty of this mount (as well as the original design) is that it mounts to the bed, keeping the print itself in a static frame of reference so you can actually get stable timelapse…
📸 Logitech C270 Wall Mount (3D Printer Timelapse Bracket) Simple, sturdy wall mount for the Logitech C270 webcam—perfect for capturing clean timelapse footage of your 3D prints. 🧩 Overview This is a compact wall-mounted bracket designed…
Project Details: https://projects.i3mc.fun/ Full mounting system for an autonomous solar-powered timelapse camera built around the ESP32-CAM. Designed for long-term outdoor deploymen. The system consists of a camera holder that secures…
A time-lapse setup that can be created with a selfie stick, a basic circuit board, and a simple button. Once you've adjusted the location where the table should come after each layer in Prusa Slicer, it's ready to use. You can use CapCut…
Plant Cam: Square Press-Fit Socket for Autofocus OV5640 Plant Cam is a compact timelapse camera made exclusively for plants. I started this project with the goal of spotting problems early, understanding when to water, and monitoring my…
Program the servo and the timelapse mode of your action camera to make 360º timlapse
Per creare un timelapse di una stampa 3D serve un comando per fare una foto alla fine di ogni strato di stampa; ho pertanto cercato un po' in giro per trovare una soluzione già pronta per la mia Ender 3 PRO, ma non ho trovato quello che…
A custom 3D-printed phone mount designed specifically for the Creality printer, perfect for capturing high-quality timelapses with the Samsung Galaxy A14. Whether you're showcasing intricate prints or tracking your progress, this mount is…
Based on the excellent blog entry from Prusa about this topic : https://blog.prusaprinters.org/how-to-create-beautiful-3d-print-timelapse-videos_29743/ Instead of a cable, I wanted to use a simple Infrared remote control (JJC DSC Remote)…
PlantCam: 3D Printed Plant Camera Case Why I created this project Plant Cam is a minimalist 3D printed enclosure for a XIAO ESP32S3 Sense microcontroller and an OV5640 camera; a sturdy mount with a tripod thread, and nothing else. I built…
use 2 walls, 5-10% infill. use the speed, filament and temperature you want
You can put this on any 2020 aluminum extrusions such as Ender 3 MakerPi p2 LulzBot AO-100 TronXY X5SA Snapmaker A350
I modified my previous model of camera switch mount. No assembly required. just attach it to the x gantry wing. perfect fitting. Printed in a single piece for better rigidity. Remote camera swutch used:…
I made a custom model to use the Galaxy S Pen (from Galaxy phones, not tablets) as a Bluetooth shutter for time-lapse on
I had the idea for this mount some time ago while doing some tall prints, and they won't fit the scene in timelapses. This is best suited for tall prints, and less for large and short ones, but since it is so easy and fast to print, you…
This is a remix of the project by @Chris_150569. The cover is designed to keep the Prusa GPIO Hackerboard , the PC817A Optocoupler Isolation Module , and a Bluetooth remote for timelapse photography neatly organized in one compact unit.…
****Advisory***** Low Voltage Issues reported on Pi5 running from 22.5W Powerbank with ZWO USB connected. High power USB mode to be enabled manually in start-up config due to unofficial power supply (<25w). Compatibility table added -…
No rooted firmware for K1C 2025 at time of writing. No custom webcam, no Octolapse. 😡 This is a set of simple Bluetooth remote holder and "trigger stick". Do timelapse with your smartphone by using the print head to trigger the remote on…
the M5 timelapse feature is so bad I made this jig that you need to mount on the bed. you'll get great timelapses. You need to remove the build plate mounting screws to mount it. and then the buildplate should slide in.
Remix of https://www.thingiverse.com/thing:6401198 The beauty of this mount (as well as the original design) is that it mounts to the bed, keeping the print itself in a static frame of reference so you can actually get stable timelapse…
📸 Logitech C270 Wall Mount (3D Printer Timelapse Bracket) Simple, sturdy wall mount for the Logitech C270 webcam—perfect for capturing clean timelapse footage of your 3D prints. 🧩 Overview This is a compact wall-mounted bracket designed…
Project Details: https://projects.i3mc.fun/ Full mounting system for an autonomous solar-powered timelapse camera built around the ESP32-CAM. Designed for long-term outdoor deploymen. The system consists of a camera holder that secures…
my first Frankenstein make for time lapse without octolapse and standard shutter button. Looks ugly. but works. this is a remix of some two model, I don't have originals
Cheap timelapse upgrader - Works on all printers This is a model that clips on to a normal aluminium extrusion. The mount supports a normal samsung headset but will most likely fit with most headphones. This model will clip on to the…
***Listing updated to AllskyGo [Gen2] from October 2026 (Gen1 files remain in .Zip)*** 🌌Build your own Portable Allsky Timelapse Camera Inspired by the Thomas Jacquin concept, Allsky Go is the latest innovation in all-sky camera…
